To display a message based on the date
Hi All,
Please help me with this Requirement
It is as follows:
1)Need to display a message if date is before the current date by 30 days or 14 days or 7 days or today.
2) Need to display the same message if the date is after the current date by 1 day, 14 days, 30 days and then every 30 days till one year.
Please suggest.
Thank you.
Use the following function module to calculate date
FUNCTION z_date_calc.
""Local interface:
*" IMPORTING
*" VALUE(L_DATE) TYPE D
*" VALUE(L_IND) TYPE C
*" VALUE(L_NUM) TYPE I
*" VALUE(L_SIGN) TYPE C
*" EXPORTING
*" VALUE(L_DATE) TYPE D
*" EXCEPTIONS
*" INVALID_DATE
*" INVALID_SIGN
*" INVALID_INDICATOR
DATA: l_day(2),
l_month(2),
l_year(4),
l_len TYPE i,
l_mon4(4).
l_day = l_date+6(2).
l_month = l_date+4(2).
l_year = l_date(4).
CASE l_ind.
WHEN 'D'.
IF l_sign = 'A'. " add days
l_date = l_date + l_num.
ELSEIF l_sign = 'S'. " subtract days
l_date = l_date - l_num.
ELSE.
RAISE invalid_sign.
ENDIF.
WHEN'M'.
IF l_sign = 'A'.
l_month = l_month + l_num. " add months
DO.
IF l_month > 12.
l_year = l_year + 1.
l_month = l_month - 12.
ENDIF.
IF l_month < 13.
EXIT.
ENDIF.
ENDDO.
ELSEIF l_sign = 'S'. " subtract months
l_mon4 = l_month - l_num.
IF l_mon4 < 1.
DO.
IF l_mon4 < 1.
l_mon4 = l_mon4 + 12.
l_year = l_year - 1.
ENDIF.
IF l_mon4 >= 1.
SHIFT l_mon4 LEFT DELETING LEADING space.
l_month = l_mon4.
EXIT.
ENDIF.
ENDDO.
ELSE.
SHIFT l_mon4 LEFT DELETING LEADING space.
l_month = l_mon4.
ENDIF.
ELSE.
RAISE invalid_sign.
ENDIF.
l_len = STRLEN( l_month ).
IF l_len < 2.
CONCATENATE '0' l_month INTO l_month.
ENDIF.
l_len = STRLEN( l_month ).
IF l_len < 2.
CONCATENATE '0' l_month INTO l_month.
ENDIF.
CONCATENATE l_year l_month l_day INTO l_date.
WHEN 'Y'.
IF l_sign = 'A'.
l_year = l_year + l_num.
ELSEIF l_sign = 'S'.
l_year = l_year - l_num.
ELSE.
RAISE invalid_sign.
ENDIF.
l_len = STRLEN( l_day ).
IF l_len < 2.
CONCATENATE '0' l_month INTO l_month.
ENDIF.
l_len = STRLEN( l_month ).
IF l_len < 2.
CONCATENATE '0' l_month INTO l_month.
ENDIF.
CONCATENATE l_year l_month l_day INTO l_date.
WHEN OTHERS.
RAISE invalid_indicator.
ENDCASE.
ENDFUNCTION.
Input as follows:
l_date = the base date on which to base your calculation
l_ind = 'D', 'M' or 'Y' (for days, months or years)
l_num = n (the number to be added or subtracted from the base date
l_sign = 'S'ubtract or 'A'dd.
once you have made the calculation, the comparison is simple.
Similar Messages
-
Creation of internal table dynamically based on the Date Range entered
Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
<b>CSR District 06/2006 07/2006 08/2006 totals</b>
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram KandulaHi Sivaram,
I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = gt_fCAT1
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
select vbeln
fkart
vkorg
vtweg
fkdat
spart
fksto
from vbrk
client specified
into table gt_vbrk
where mandt = sy-mandt
and fkart in ('ZF5','ZFR')
and vkorg = '1100'
and vtweg = '20'
and fkdat in s_fkdat
and spart = '06'
and fksto = ' '.
if gt_vbrk[] is not initial.
select vbeln
fkimg
prsdt
netwr
matnr
arktx
werks
mwsbp
from vbrp
client specified
into table gt_vbrp
for all entries in gt_vbrk
where vbeln = gt_vbrk-vbeln
and werks in s_werks
and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
name1(3) type c,
s_month type string,
s_month1 type string,
s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
loop at gt_vbrp into gs_vbrp.
gs_final2-matnr = gs_vbrp-matnr.
gs_final2-arktx = gs_vbrp-arktx.
gs_final2-fkimg = gs_vbrp-fkimg.
lv_month1 = gs_vbrp-prsdt.
read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
if sy-subrc eq 0.
name1 = wa_t247-ltx.
endif.
concatenate name1
lv_month1(4) into s_month SEPARATED BY '_' .
CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
gs_final2-month = s_month.
lv_netwr1 = gs_vbrp-netwr.
lv_mwsbp1 = gs_vbrp-mwsbp.
gs_final2-MONTH_QTY = S_MONTH1.
GS_FINAL2-MONTH_VAL = S_MONTH2.
gs_final2-value = lv_netwr1 + lv_mwsbp1.
append gs_final2 to gt_final2.
clear: gs_final2. "lv_name2.
endloop.
if gt_final2[] is not initial.
sort gt_final2 by matnr month ascending .
loop at gt_final2 into gs_final2.
gs_final2_01 = gs_final2.
collect gs_final2_01 into gt_final2_01.
endloop.
endif.
ENDIF..
Regards
Ankur -
Header row in ALV Grid, based on the data in the table
Hi All,
I have a requirement wherein, based on the data in the table used for ALV, i need to add rows as sort of header in the ALV display.
For e.g. my table has
Appl No. Item Material Desc. Cost -> Column Heading
1 10 400 Excavation 10.00 -> Data
1 20 400 Footing 10.00
2 10 400 Excavation 10.00
2 20 400 Footing 10.00
For every new Appl No., i need to add a row, or sort of header specifying the appl no. details. means
Appl No. Item Material Desc. Cost
Appli. No. 1 Date: 01/01/1009 -> my requirement
1 10 400 Excavation 10.00
1 20 400 Footing 10.00
Appli. No. 2 Date: 02/01/1009
2 10 400 Excavation 10.00
2 20 400 Footing 10.00
Is this possible in ALV my any means? Currently i m using normal ALV Grid
Regards,
JanakiHi..
Try like this... I think u have Application number and date in ur table ... First get the total table data into internal table.. and to add the row
*Declare the var1 as 0 and var2.
loop at internal table
*var1 = var1 +1
when application number =var1
concatenate : 'Appli. No.' (table- appli no field) 'Date:' (table-date field) into var2.
perform display(some name)
*endloop.
*form display...
alv display part.. first give that var2 like eg.. wa_alv-field= 'var2'.
end form.
Hope this will help u .....
Regards,
Abaper -
My Ipad is locked and display a message that says " The Ipad hasnt been backed up in 2 weeks...........connected to wifi". How do I come out of it?
Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Change the messages commig from the Data Base
Hello,
My question is because I want to change the messages commig from the Data Base that reach the web bowser, that is, I have some Check constraints defined on the tables, but when on the web the user try to make something that violate the constraint, on the top of the page is displayed a message like "???? SYS_C00164048 ????".
I like to change that message to display something moer descriptive. How can I do that?
ThanksHi Chris Muir has a detailed blog entry on this->
http://one-size-doesnt-fit-all.blogspot.com/2007/05/dont-constrain-yourself-displaying.html
Brenden -
My iphone 4 started displaying a message box with the following message: "This accessory is not optimized for this phone. You may experience noise and loss of battery." My question is: Why is this happening and how do I fix it? (I'm losing battery power precipitously). Thanks in advance for any assistance with this question.
Thanks Kilted Tim, you solved the problem. I'm mightily impressed at the simplicity of the solution!
Jaded Kane -
Percentage based on the Date and Dimension - WEBI
Hello,
I have to calculate percentage based on the Dates and a Dimension.
I have BEX Query as source and reporting is done on BOXI - WEBI
Here is the table structure in the report.
List# , Process01, Process02.
List# is unique and Process01-Has 4 operations, Process02 has 3 operations (and these Operations can change from 3 to 7 or 2).
Operations will have a 'Date' only when it is completed.
and when all the operations in a 'Process' have 'Date' then i need to get the 'Latest Date'. If few of the operations are not confirmed, then i need to get the percentage like when 2 of 4 operations have date it will be 50% and when no operation is confirmed then 0% and so on .
Example Cube data:
List#,ProcessCategory,Operation,Date
100,Process01,456,11/11/2010.
100,Process01,457,11/12/2010.
100,Process01,489,
100,Process01,490,
100,Process02,890,11/13/2010.
100,Process02,891,11/14/2010.
100,Proceess02,892,11/15/2010
Result:
List#, Process01, Process02
100,50%,11/15/2010.
Please help me in this, i tryed different logics but it is giving ERROR at percentage.
Your help would be appreciated!
Thanks in advance.I applied this:
If([Process Category] InList("Process01") And IsNull([Date]);[Percentage];Max(Date)))
[Percentage] = (Count([Date])/Count([Operation]))*100.
but, this is not becoming true - even when Operation has one Date
Showing result as:
List#,Process01,Process02
100, 11/12/2010, 11/15/2010
But result should be
100,50%,11/15/2010
Can anyone help me achieve the right result!
Thanks in advance. -
Setting the series color of a bi beans graph based on the data values
How do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistanceHow do I conditionally set the series color of a bi beans graph based on the data values?
I am using the following code to get the data values and set the series color:
Graph gr=(Graph)CmdrDashboardP1_pres1.getView();
DataAccess da=gr.getGraphModel().getDataAccess();
DataDirector dd=gr.getDataDirector();
DataMap dm=dd.getDataMap();
int re=dd.ROW_EDGE;
int ce=dd.COLUMN_EDGE;
Object val=da.getValue(re,ce,dm.DATA_TYPE);
int seriesCount=da.getEdgeCurrentSlice(DataDirector.ROW_EDGE);
if (val <=45.0)
gr.getSeries().setColor(new Color(255,0,0),seriesCount);
I get a NullPointerException from the line of code "Object val=da.getValue(re,ce,dm.DATA_TYPE)." I have tried the code with DATA_UNFORMATTED as well, but get the same exception. When I print the DataMap value of dm the results are [dataUnformatted, dataViewFormat, value, dataIsTotal, dataType].
Also, I get the error "method <= (java.lang.Object,double) not found in class _CmdrDashboardP1" from the "if (val <=45.0)" code.
Thanks for any assistance -
How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.
Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
DATA lo_el_input TYPE REF TO if_wd_context_element.
DATA ls_input TYPE wd_this->element_input.
DATA lv_vbeln TYPE wd_this->element_input-vbeln.
* navigate from <CONTEXT> to <INPUT> via lead selection
lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
* @TODO handle non existant child
* IF lo_nd_input IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_input = lo_nd_input->get_element( ).
* @TODO handle not set lead selection
IF lo_el_input IS INITIAL.
ENDIF.
* get single attribute
lo_el_input->get_attribute(
EXPORTING
name = `VBELN`
IMPORTING
value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = ' ' ). -
Is it possible to find the table based on the Date ?
Dear Team ,
Is it possible to find the table based on the Date ?
I have created an table ,But forgot the Table Name .
Is it possible to find the Tables created on particular Date .
Regards ,
Augustineas date is record the time also below query will work.
select * from user_objects
where
object_type = 'TABLE' and
to_date(created,'DD-MON-YYYY') =to_date('<your date value in DD-MON-YYYY format>','DD-MON-YYYY');
Edited by: shaileshM on Feb 24, 2010 9:39 PM -
Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?
Maybe it's set as a login item:
- System Preferences: Users and Groups:
- Highlight your user account in the left pane/list
- Click "Login" tab at the top.
See if you have an Automater action on the list
- Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it. -
I scanned an old photo but the date displayed is today, I want the date to be the date the photo was taken. How do I change the date of the photo in iPhoto 11?
There are two kinds of metadata involved when you consider jpeg or other image file.
One is the file data. This is what the Finder shows. This tells you nothing about the contents of the file, just the File itself.
The problem with File metadata is that it can easily change as the file is moved from place to place or exported, e-mailed, uploaded etc.
Photographs have also got both Exif and IPTC metadata. The date and time that your camera snapped the Photograph is recorded in the Exif metadata. Regardless if what the file date says, this is the actual time recorded by the camera.
Photo applications like iPhoto, Aperture, Lightroom, Picasa, Photoshop etc get their date and time from the Exif metadata.
When you export from iPhoto to the Finder new file is created containing your Photo (and its Exif). The File date is - quite accurately - reported as the date of Export.
However, the Photo Date doesn't change.
The problem is that the Finder doesn't work with Exif.
So, your photo has the correct date, and so does the file, but they are different things. To sort on the Photo date you'll need to use a photo app. -
Get Old Value and the new value based on the date
Hi
I have a table called roster created below with following insert statements.
CREATE TABLE ROSTER
ROSTER_EMPLOYEE_DEF_ID NUMBER,
EMPLOYEE_ID NUMBER,
DEFINITION_REGION_CODE NUMBER,
DEFINITION_DISTRICT_CODE NUMBER,
DEFINITION_TERRITORY_CODE NUMBER,
START_DATE DATE,
END_DATE DATE
INSERT INTO ROSTER
(ROSTER_EMPLOYEE_DEF_ID,EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE)
VALUES
(1,299,222,333,444,'1-JUN-2011','30-JUN-2011')
INSERT INTO ROSTER
(ROSTER_EMPLOYEE_DEF_ID,EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE)
VALUES
(2,299,223,334,445,'1-JUL-2011','20-JUL-2011')
INSERT INTO ROSTER
(ROSTER_EMPLOYEE_DEF_ID,EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE)
VALUES
(3,299,224,335,446,'1-AUG-2011','30-AUG-2011')
INSERT INTO ROSTER
(ROSTER_EMPLOYEE_DEF_ID,EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE)
VALUES
(4,300,500,400,300,'1-JUN-2011','20-JUN-2011')
INSERT INTO ROSTER
(ROSTER_EMPLOYEE_DEF_ID,EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE)
VALUES
(5,300,501,401,301,'1-JUL-2011','20-JUL-2011')
In the above table we have columns like
EMPLOYEE_ID,DEFINITION_REGION_CODE,DEFINITION_DISTRICT_CODE,DEFINITION_TERRITORY_CODE,START_DATE,END_DATE
The result i am looking from the above table is based on the EMPLOYEE_ID OF START_DATE AND END_DATE
I need to get OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_CODE
Similarly OLD_DEFINITION_REGION_CODE and the NEW_DEFINITION_REGION_CODE
and OLD_DEFINITION_TERRITORY_CODE and the NEW_DEFINITION_TERRITORY_CODE
I need to get one row of data for each employee saying old value and new value
for employee 299 there are 3 records it must give the new record which is the latest date i.e start date 1-aug-2011 and end date 30-aug-2011 old record will be
start date 1-jul-2011 and 20-jul-2011
For the above table data i need to get the data as below
EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_CODE OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE START_DATE END_DATE
299 223 224 334 335 20-JUL-11 30-AUG-11
300 500 501 400 401 20-JUN-11 20-JUL-11
Please suggest me to get the above result based on the data. Please let me know if my posts are not clear
Thanks
SudhirSELECT EMPLOYEE_ID,
OLD_DEFINITION_REGION_CODE,
NEW_DEFINITION_REGION_CODE,
OLD_DEFINITION_DISTRICT_CODE,
NEW_DEFINITION_DISTRICT_CODE,
OLD_DEFINITION_TERRITORY_CODE,
NEW_DEFINITION_TERRITORY_CODE,
START_DATE,
END_DATE
FROM (
SELECT EMPLOYEE_ID,
ROW_NUMBER() OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE DESC) RN,
LAG(DEFINITION_REGION_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_REGION_CODE,
DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE,
LAG(DEFINITION_DISTRICT_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_DISTRICT_CODE,
DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE,
LAG(DEFINITION_TERRITORY_CODE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) OLD_DEFINITION_TERRITORY_CODE,
DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE,
LAG(END_DATE) OVER(PARTITION BY EMPLOYEE_ID ORDER BY START_DATE) START_DATE,
END_DATE
FROM ROSTER
WHERE RN = 1
EMPLOYEE_ID OLD_DEFINITION_REGION_CODE NEW_DEFINITION_REGION_CODE OLD_DEFINITION_DISTRICT_CODE NEW_DEFINITION_DISTRICT_CODE OLD_DEFINITION_TERRITORY_CODE NEW_DEFINITION_TERRITORY_CODE START_DAT END_DATE
299 223 224 334 335 445 446 20-JUL-11 30-AUG-11
300 500 501 400 401 300 301 20-JUN-11 20-JUL-11
SQL> SY. -
Unable to print e-mail messages from my Mac book pro directly to my HP ink jet printer. Can print from Word, Excel, Safari. E-mail messages only print the date And "sent to" name, the remainder is blank.
If you haven't done so already, try resetting the printing system.
Reset Printing System -
Hi All,
I want to implement three level Horizental navigation on the top navigation and menu items are created based on the data available in a SharePoint List.
Implement this requirement through customization, how can i start any help
ThanksHello,
You can follow these links to get the result that you want. You can get the desired result either using the custom list or a site map. Please make sure when you edit the master page, dont work on the original v4.master. Always make a a copy and then work
on it.
This link will show you how get that navigation using a list.
http://www.bitsofsharepoint.com/BlogPoint/Lists/Posts/Post.aspx?ID=60
This link will show you how get that navigation using a sitemap.
http://www.sharepointdiary.com/2012/01/custom-top-navigation-using-sitemap.html
Please mark as "Answered" if this helped you.
Thanks,
norasampang
Maybe you are looking for
-
Not able to get the class file PrintService
Hi, I am trying to use the following program to get the Printer name from my Registry.. this program has been taken from Forums. package yourpackage; import java.awt.Graphics; import java.awt.print.PageFormat; import java.awt.print.Printable; import
-
Account assignment for Movt type 101 and 501
All SAP Gurus, We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types. We are aware that the Transaction Key is 'GBB'. But how to know that which 'General Modification' is used for
-
HT1329 What if old computer is not available?
I want to put my music from my ipod on to my new computer. The old one crashed and I was not able to save the itunes library or anything...any suggestions?? I have all of my music on the ipod... thanks in advance!
-
Hi, Can anyone provide me with some linksor tutorials for SRM 7 workflows. Thanks Prasy
-
27" I7 iMac will not recognize thumb drive
I have a PNY 8gb Attache thumb drive that is not recognized by my 2010 27" I7 iMac. It does not show on the desktop, disk utility, finder or system profile. However, this thumb drive works on my MacBook, 2006 24" iMac and a Dell laptop running XP.