To display line item data at header level

Dear Techis ,
The requirment is that i am havin three line items for a particular document.
I need to shw amount of all dese line item at Header level , it means of thr line item i will jus pick Amount and will shw it in one single row with in three differen colums .
is it possible ?
Thanks&Regards
Santo

Hi Santosh,
So you must be having items in a internal table, loop at that internal table and sum the amount field using a variable inside the loop and print the value.
If you are dealing with Purchase Order or Sales Order , you can get the value directly from the header tables(EKKO or VBAK).
Revert back if u have any doubts.
Regards
Karthik D

Similar Messages

How to display line items corresponding to Header adobe form

Hi ,
As I am new to Adobe Form, So struggling with below problem related with Adobe Form.
For example, I have data in an internal table :
Stage      item
100         A
100         B
100         C
200         D
200         E
Here you have for field 'Stage' value '100' , I have 3 line items, for value '200' , it is 2 line items and so on.
My requirement is , I have to show Stage field at top and corresponding line items should be displayed in table.
Stage: 100
item
A
B
C
Stage: 200
D
E
I have used Nested table concept to achieve it but didn't get expected output.
Please help me out.

Hi,
     If all of your line items are getting displayed in different pages, to my knowledge, there may be two possibilities.
1) May be the size of the main window can accomodate only one line item. If one item data fills up the window, then there wont' be any space for the next line item data to be accomodated in the same window in the same page, so, the system triggers the next page. Like-wise for each item data. If this is the case, increase the height of the main window to display items in same page.
2) Check the driver program. Find the Write_form block, which is written inside an item loop. May be there is a Form-control Function module( Control_form with parameter 'NEW-PAGE' ) being called after the write_fom block, within the loop. If this is the case, remove the control_form FM section to make the data display in same page.
Best Regards,
Kumaar.S

Need a table to be printed at end of line items for each Header level

Hi Friends,
I have to print a table in the smartform at the end of all the line items.
The problem is
For example there are 2 Header Details say A B and header A has 15 line items and B has 8 line items.
Now I am printing header A line items first. Suppose each page can have 5 line items. At the end of line items for header A I need to print a table at the end of line items for each header
Page1
A1
A2
A3
A4
A5
Page2
A6
A7
A8
A9
A10
Page3
A11
A12
A13
A14
A15
Table1 has to be printed on this page
Page4
B1
B2
B3
B4
B5
Page5
B6
B7
B8
Table2 has to be printed on this page.
Does any one had this kind of situation?
Waiting for your replies.
Thanks,
Chaithanya
Edited by: chaithanya k on Mar 20, 2008 5:08 PM

Hi,
Thanks for your reply and sorry for the late response.
I have 2 tables one is the Header table and the other is Item table. After printing all the item details and then it should print the Header level details at the end of the items details.
Hope you understand. Please see my question where I have given an example.
Thanks,
Chaithanya.

BeX Analyzer Aggregation - display line item and header amounts in same row

Hi Experts,
I've a requirement in which I'm looking for help.
Consider that I've one DSO with line item detail and I wish to display on a report for each line item (in the same row) the value of the header which has to be the sum of all line items for each header.
Here's an output of what should be displayed:
PO || Hdr || PO item Item Amount || PO Amount (Sum All Items/Header)
1 || 1 || 10 u20AC || 15 u20AC
1 || 2 || 5 u20AC ||15 u20AC
I've already tried to create a formula/calc key figure, using the KF "Item Amount" aggregated with exception of the "PO Hdr" Char, but it doesn't work.
I know that i can built this on the data model but I just want to be sure before that there's no way to achieve this requirement through query designer.
All help will be welcomed!
Thank you.
Nuno

Hi Lakshmipathi Sir,
Thanks for your reply. Could you please let me know how exactly i need to mention the logic to ABAPer.
I can see two fields are giving from VBKD table with line item wise it is displaying.
1. BSTKD
2. BSTKD_M
thanks,

FI Line Item Data

Hi,
I have report against FIAR line items data(0FIAR_O03).The purpose is to report at Customer level for aged trail balance amounts(only for charge back amounts).I have the report ready and restricted document type only with CB- charge back.But the problem is,on the R/3 side for some CB accounts,there is a reference amounts like Credit memos or Customer Payments(document type DZ and DG).How can get these refrences into my report when i restrict the report only with CB.So under charge back ammount,the user should be able to see the associated Credit memos and Customer Payments as in R/3.Thanks for the help.
Ravi.

Hi Revathi,
Kindly find the answers below :
1.How the table BWOM2_TIMEST will work for delta & what is the selection will happen at BKPF-CPUDT
Basically, BWOM2_TIMEST will show you the Last Time stamp for both Init and Delta..
Whenever you will do an Init load.....automatically an entry will take place in this table.....and you will see a "X" sign in the field "LAst TS"....
Also for Delta...there may be N number of entries with Update mode D....but only for the latest delta you will see a "X" sign in the field "LAst TS"....
With Financial Accounting line items that have been posted in the SAP R/3 system since the last data request, the extractors identify the following delta dataset using the time stamp in the document header (BKPF-CPUDT).
2.How the tbale will wok BWOM_SETTINGS for delta
With these settings your delta extraction uses CPU date of recording records in table in R/3 to define your security interval with at least 1 day
This means that your data is loaded until the actual day - 1.
You can check the SAP note : 485958
Regards,
Debjani..

Dates at header level

Dear experts
Is it possible within WebIC to display dates at header level for a service transaction (such as Service ticket)? Currently the SLADates view only show dates at item level.
Thanks a lot
Stephanie

The viewset is defaulted for item level date profile and action profiles.
The Business Object type will have to be BUS2000116 in your action and date prof's - service process header
Have you customised any viewset yet !
Regards

Line item data is not saving while creating a Sales order using Interactive

Hi all,
I am creating a sales order Using Interactive forms. In the form i am having Header data and line item data.I had created two structures one for Header data and one for Line item data. For entering the LINE ITEM DATA i had created a Dynamic table with Buttons ADD ROW and DELETE ROW.
User will Add the Row or Delete the Row based on the requirement.
My issue is When ever the user clicks the SUBMIT button after entering the header data and 3 line items data , Sales order has been created with only first line item and the remaining two line items are not created.
My Interactive form is like below
HEADER DATA
DOC_TYPE
SALES_ORG
DIST_CHN
DIVISION
PURCH_NO
PARTN_ROLE
PART_NO
LINE ITEM DATA
                         ITEM_NO      MATERIAL          PLANT          QTY        COND_TYPE            COND_VALUE
ADD ROW
DELETE ROW
                                                                                SUBMIT
My code for the method ONACTIONCLICK is like below
method ONACTIONCLICK .
data:
      Node_Adobe       type ref to If_Wd_Context_Node,
      Node_Zsaleheader       type ref to If_Wd_Context_Node,
      Elem_Zsaleheader       type ref to If_Wd_Context_Element,
      Stru_Zsaleheader       type If_Main=>Element_Zsaleheader,
      Node_Zsaleitem       type ref to If_Wd_Context_Node,
      Elem_Zsaleitem       type ref to If_Wd_Context_Element,
      Stru_Zsaleitem       type If_Main=>Element_Zsaleitem.
data: header_data type BAPISDHEAD.
data: item_wa type BAPIITEMIN.
data: item_data type table of BAPIITEMIN.
data: partner_wa type BAPIPARTNR.
data: partner_data type table of BAPIPARTNR.
data: sales_order type BAPIVBELN-VBELN.
data: Errorlog type BAPIRETURN1.
navigate from <CONTEXT> to <ADOBE> via lead selection
Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN=>wdctx_Adobe ).
navigate from <ADOBE> to <Zsaleheader> via lead selection
Node_Zsaleheader = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleheader ).
Node_Zsaleitem = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleitem ).
get element via lead selection
Elem_Zsaleheader = Node_Zsaleheader->get_Element( ).
Elem_Zsaleitem = Node_Zsaleitem->get_Element( ).
get all declared attributes
Elem_Zsaleheader->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Zsaleheader ).
header_data-DOC_TYPE = Stru_Zsaleheader-DOC_TYPE.
header_data-SALES_ORG = Stru_Zsaleheader-SALES_ORG.
header_data-DISTR_CHAN   = Stru_Zsaleheader-DISTR_CHAN.
header_data-DIVISION = Stru_Zsaleheader-DIVISION.
header_data-PURCH_NO = Stru_Zsaleheader-PURCH_NO.
partner_wa-PARTN_ROLE   = Stru_Zsaleheader-PARTN_ROLE.
partner_wa-PARTN_NUMB = Stru_Zsaleheader-PARTN_NUMB.
   append partner_wa to partner_data.
    Elem_Zsaleitem->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Zsaleitem ).
item_wa-ITM_NUMBER = Stru_Zsaleitem-ITM_NUMBER.
item_wa-MATERIAL   = Stru_Zsaleitem-MATERIAL.
item_wa-PLANT = Stru_Zsaleitem-PLANT.
item_wa-REQ_QTY = Stru_Zsaleitem-REQ_QTY.
item_wa-COND_TYPE   = Stru_Zsaleitem-COND_TYPE.
item_wa-COND_VALUE = Stru_Zsaleitem-COND_VALUE.
append item_wa to item_data.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
    ORDER_HEADER_IN           = header_data
WITHOUT_COMMIT            = ' '
CONVERT_PARVW_AUART       = ' '
IMPORTING
   SALESDOCUMENT             = sales_order
SOLD_TO_PARTY             =
SHIP_TO_PARTY             =
BILLING_PARTY             =
   RETURN                    = errorlog
TABLES
    ORDER_ITEMS_IN            = item_data
    ORDER_PARTNERS            = partner_data
ORDER_ITEMS_OUT           =
ORDER_CFGS_REF            =
ORDER_CFGS_INST           =
ORDER_CFGS_PART_OF        =
ORDER_CFGS_VALUE          =
ORDER_CCARD               =
ORDER_CFGS_BLOB           =
ORDER_SCHEDULE_EX         =
endmethod.
PLEASE SUGGEST ME IF ANY CODE CHANGE IS REQUIRED
Thanks in advance
Ajay

Hi,
The item data is not read because, the dynamically added rows should also reflect back to the Web Dynpro context. When the user clicks on Add Row, use the Onsubmit event to add a empty line to internal table and then bind it to the context. And if the user removes a row, remove a row from internal table and bind it back to the context.
You may refer this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

What is table name in SAP R/3 for PM order line item data

Hello,
I am extracting data for PM module and Interested in PM order line item data. Table AUFK is for PM order header master data.
Is there any other table for PM order line item master data?
Thanks,
Ishak

Hi Ishak,
The item table is AUFP.
Thanks.

Is terms of delivery and payment item data or header data

Hello Gurus,
is terms of delivery and payment item data or header data ? where does it configure ?
Many thanks,
Frank

Dear Frank
It is at header level only. Whatever datas you maintain in customer master, by default, it will flow both in header and item level. However, if you wish to change at item level, depending upon the requirement, you may do so based on which, there will be document split.
thanks
G. Lakshmipathi

Display line items in Cells of a table- Smartform

Hello All,
Can any one help me achieving the below requirement.
I have a requirement of printing invoice with a smartform. I am displaying line items from a TABLE node by looping VBRP's internal table. There are 12 cells and the 5 th cell contains a number of Dicount rates.
I am displaying these discount rates from LOOP node by looping KONV's internal table within that CELL. The 7 th Cell has got 2 values which are required to be: one aligned to the TOP right corner of the cell and the other to the bottom right side of the cell.
Now the issue description is:
CELL-5: Contains unknown number of values for display within the cell to be positioned as MIDDLE justified for an item(POSNR) of the main item table.
CELL-7: Contains two fixed values :KWERT to be at Top right of the CELL-7and NETWR at the bottom right of CELL-7
I have managed to display the sub items in CELL-5 in the middle by giving values to SPACE BEFORE/SPACE AFTER sections of PARAGRAPH FORMAT in SMART STYLE.
Requirement: Irrespective of number of sub items in CELL-5 the 2 values in CELL- 7 to be aligned as one at the top right and the other to the bottom right cell flexibly . Same applies to other items(POSNR) of MAIN VBRP item table.
The ROWS of the MAIN Table to be flexible enough to shrink the space when then are less number of subitems in   CELL-5.
Values in Cell-7 should be adjusted according to contents in CELL-5.
Thanks in advance for your valuable suggestions.

Hi,
Do one thing while filling the 5th cell , count the number of values(counter) in it for each record and fill new internal table (Itab_cell7) as follws.
DATA : FLAG,
counter1 type n.
DO COUNTER TIMES.
counter1 = counter1 + 1.
CLEAR FLAG.
IF counter = 1.
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
ENDIF.
IF counter1 = (counter1 - 1).
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
EXIT.
ENDIF.
IF FLAG NE 'X'.
WA_CELL7-VALUE = ''.
APPEND WA_CELL7 TO ITAB_CELL7.
ENDIF.
ENDDO.
Adjust the code if need as per your data.
In cell 7 under loop node print ITAB_CELL7 values in a text. and prepare a paragragh for alingment.
if it does not work for send me the XML file for your smartform.
Regards,
Antim

Line Item Data?

Hi experts,
               What is Line Item Data? Can somebody give me an example to understand better the use of Line item data from the reporting prospective?
thanks in advance
regards,
dubbu

Hi
I think ur question releted to LINE ITEM DIMENSION
Line Item and High Cardinality
Use
When compared to a fact table, dimensions ideally have a small cardinality. However, there is an exception to this rule. For example, there are InfoCubes in which a characteristic document is used, in which case almost every entry in the fact table is assigned to a different document. This means that the dimension (or the associated dimension table) has almost as many entries as the fact table itself. We refer here to a degenerated dimension. In BW 2.0, this was also known as a line item dimension, in which case the characteristic responsible for the high cardinality was seen as a line item. Generally, relational and multi-dimensional database systems have problems to efficiently process such dimensions. You can use the indicators line item and high cardinality to execute the following optimizations:
       1.      Line item: This means the dimension contains precisely one characteristic. This means that the system does not create a dimension table. Instead, the SID table of the characteristic takes on the role of dimension table. Removing the dimension table has the following advantages:
¡        When loading transaction data, no IDs are generated for the entries in the dimension table. This number range operation can compromise performance precisely in the case where a degenerated dimension is involved.
¡        A table- having a very large cardinality- is removed from the star schema. As a result, the SQL-based queries are simpler. In many cases, the database optimizer can choose better execution plans.
Nevertheless, it also has a disadvantage: A dimension marked as a line item cannot subsequently include additional characteristics. This is only possible with normal dimensions.
       2.      High cardinality: This means that the dimension is to have a large number of instances (that is, a high cardinality). This information is used to carry out optimizations on a physical level in depending on the database platform. Different index types are used than is normally the case. A general rule is that a dimension has a high cardinality when the number of dimension entries is at least 20% of the fact table entries. If you are unsure, do not select a dimension having high cardinality.
Note: In SAP BW 3.0, the term line item dimension from SAP BW 2.0 must a) have precisely one characteristic and b) this characteristic must have a high cardinality. Before, the term line item dimension was often only associated with a). Hence the inclusion of this property in the above. Be aware that a line item dimension has a different meaning now than in SAP BW2.0.

What is line item datas,how can u check line item in Infocube?

Hi friends,
what is line item datas,how can u check line item in Infocube?

hi konda,
line item data
i shall give u an example .
consider a super market bill,
the bill has 1.customer name 2. bill number 3. date of purchase
the above line will be header.
line item data are the items which u purchase.
item 1 pencil 2 rubber 3. sharpner 4. cryon 5. sketch pens
above are line item datas. for a particular set of header data u may have many line item datas.
reward points if helpful.
bye.

Display line items not possible!

Hello
I've a very strange situation on the productive system:
I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
- flag on display line items AND
- sort key 001 - POSTING DATE
why??
thanks a lot in advance,
Chiara

No, the answer was not that one, but thanks anyway.
Finally I found the answer in
Forum: Message MSITEM033 in New GL - Cannot Display GL Line Items
note OSS:
- 1323960 Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
- 1149500 Clearing open items by batch input selection
- 1437341 Note 1437341 - Correction of BSEG/Index tables after note 1323960
regards,
Chiara

Module pool- only first line item data saved, rest disappears??

Hi Experts,
I have one module pool that was developed by other developer. It has header details input fields and items details input by table control.
Now below scenarios occur:
1) When I enter only one line item, and save it, the data is saved properly
2) when I enter more than one item data and save it, it only saves first line item data.
3).When I press ENTER button after every new line item data, it saves all the data properly.
I tried to debug the report but could not find the exact problem statement as the code is written very badly without any comments.
I am pasting the flow logic code below for the screen.
So please help me figure out the problem and solution for it.
+++++++++++++++++++++++++++++++++++
PROCESS BEFORE OUTPUT.
*&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
   MODULE it_mseg_change_tc_attr.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
   LOOP AT   it_gp
        INTO wa_gp
        WITH CONTROL it_mseg
        CURSOR it_mseg-current_line.
     MODULE it_mseg_get_lines.
*&SPWIZARD:   MODULE IT_MSEG_CHANGE_FIELD_ATTR
   ENDLOOP.
* MODULE STATUS_9001.
   MODULE deactive_screen.
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
   LOOP AT it_gp.
     CHAIN.
       FIELD wa_gp-yposnr.
       FIELD wa_gp-matnr.
       FIELD wa_gp-maktx.
       FIELD wa_gp-meins MODULE check_uom ON INPUT..
*      FIELD WA_GP-DOC_QTY.
*      FIELD WA_GP-REC_QTY.
       FIELD wa_gp-gp_qty.
       FIELD wa_gp-chall_qty.
       FIELD wa_gp-netwr.
       FIELD wa_gp-remarks.
       FIELD wa_gp-exp_ret.
       MODULE it_mseg_modify ON CHAIN-REQUEST.
     ENDCHAIN.
     FIELD wa_gp-chk
       MODULE it_mseg_mark ON REQUEST.
   ENDLOOP.
   MODULE it_mseg_user_command.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_TC_ATTR.
*&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
   MODULE user_command_9001.
+++++++++++++++++++++++++++++++++++
Thanks,
Vishal.

Hi Aruna,
Below is the code as you required.
+++++++++++++++++++++++++++++
MODULE user_command_9001 INPUT.
   ygp_header_mas-ret_type = v_gpt.
   CASE sy-ucomm.
     WHEN 'MBLNR'.
       PERFORM select_mblnr.
     WHEN 'DEL'.
       PERFORM select_delivery.
     WHEN 'INTI'.
       PERFORM grt_gi_details.
     WHEN 'GENT'.
       PERFORM get_ge_details.
     WHEN 'GP'.
       PERFORM get_returnable_gp.
     WHEN 'SAVE'.
       PERFORM gen_gp_number.
       PERFORM gen_data.
       PERFORM save_data.
     WHEN OTHERS.
       PERFORM get_ge_details_other.
       IF it_gp[] IS INITIAL.
         INSERT INITIAL LINE INTO it_gp INDEX 1.
       ENDIF.
   ENDCASE.
   IF v_entry = 07 .
     PERFORM serial_no1.
     PERFORM insert_row.
   ENDIF.
   IF sy-ucomm IS INITIAL.
     PERFORM calc_amt.
   ENDIF.
   CLEAR:sy-ucomm.
ENDMODULE.                    "user_command_9001 INPUT
+++++++++++++++++++++++++++++++
MODULE it_mseg_user_command INPUT.
   ok_code = sy-ucomm.
   PERFORM user_ok_tc USING    'IT_MSEG'
                               'IT_GP'
                               'CHK'
                      CHANGING ok_code.
   sy-ucomm = ok_code.
ENDMODULE.                    "IT_MSEG_USER_COMMAND INPUT
++++++++++++++++++++++++++++++++++
MODULE it_mseg_modify INPUT.
   MODIFY it_gp
     FROM wa_gp
     INDEX it_mseg-current_line.
ENDMODULE.                    "IT_MSEG_MODIFY INPUT
====> Above module has some problem i think as while debugging it was not updating IT_GP as the current line number was not matching with IT_GP as it has only one line item and WA_GP was changing. Also WA_GP data was getting changed with LOOP with all line items data.
++++++++++++++++++++++++++++++++++++++++++++++
MODULE it_mseg_mark INPUT.
   DATA: g_it_mseg_wa2 LIKE LINE OF it_gp.
   IF it_mseg-line_sel_mode = 1
   AND wa_gp-chk = 'X'.
     LOOP AT it_gp INTO g_it_mseg_wa2
       WHERE chk = 'X'.
       g_it_mseg_wa2-chk = ''.
       MODIFY it_gp
         FROM g_it_mseg_wa2
         TRANSPORTING chk.
     ENDLOOP.
   ENDIF.
   MODIFY it_gp
     FROM wa_gp
     INDEX it_mseg-current_line
     TRANSPORTING chk.
ENDMODULE.                    "IT_MSEG_MARK INPUT
+++++++++++++++++++++++++++++++++++++++++
If I press ENTER after entering each line item, all records come in IT_GP but if not then only first line item comes. Also if I dont press ENTER after entering the first line item and and add one item (total 2) and then press ENTER then sometimes both the lines disappear.
Thanks,
Vishal

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

To display line item data at header level

Similar Messages

Maybe you are looking for