TO display pop_up on selection screen And chosse that field in 'SELECT' sta

Hello,
I want a pop up on selection screen when user clicks the push button on selection screen pop up should come on selection screen and display the all field of YTLEA table. when user checks few or all field from pop up then data for that field is selected from the YTLEA table.

DDIF_TABL_GET

Similar Messages

Selection-screen and GET

Hi all,
in my program i use PNP logical database, so system create automatically selection screen. Nice.
When user fill selection screen event start-of-selection is launched and i do GET PERNR for read data from PNP.
But my customer want to add field in selection screen. Ok, i did that. Well, now he want that when a user fills new fields the PNP is not read i.e GET PERNR shouldn't be launched, so i my program i write this :
if myfield is initial.
GET PERNR.
else.
PERFORM get_data.
endif.
But when i compile program i can't do that and i don't know how to make this and if it's possible.
Regards,

Hi tafkap,
1. u have created a z report and
   u are using PNP logical database.
2. u say,
, now he want that when a user fills new fields the PNP is not read i.e GET PERNR shouldn't be launched
suppose this is achieved, then how
are u going to fetch the data
and show the report ?
3. If u already have the logic for
   getting information from database and showing
   to the user,
   then do not use GET event.
(It is not compulsory in a ldb)
4. Instead use START-OF-SELECTION
   event
   and do the normal programming.
5. In such case,
   the selection screen (and ur extra field(s))
   will be displayed as usual
   and your own code will get triggered
   at start-of-selection.
I hope it helps.
regards,
amit m.

Add custom fields on selection screen and ouput in Transaction QM11

Hi All,
i have the requirement to enhance the transaction qm11( Report : RQMELL10) to add the custom fields on the report selection screen and in the report output.
i tried to add the fields on selection screen by copy the standard program RQMELL10 to custom one. and tried to add the fields above to the coding tab but i am not able to display the text for those fields of select-options. can any one help me is it the right way to copy the standard program to custom program and adding the custom fields and how to get the text element for the custom fields which we are going to add it. i tried to add the text element in program text elements but it is not appering on the report.
please requeting the help asap if it is possible.

Have a glance in below thread.
Enhancing transaction QM10
Also, there are some more threads available in enhancing the QM10 / QM11. Please search those as well.

Difference b/w At-selection-screen and onfield

Hi,
     What is the difference between at-selection-screen and at-selction-onfield?

Different Types of Selection Screens
What is:
1. at selection-screen on field
2. at selection-screen output
3. at selection-screen block
4. at selection-screen on value-request
5. at selection-screen on help-request and their difference?
For knowing Selection-screens:
First you must have right understanding of Events.
- Events are introduced by Event Keyword. They end when again next processs begins.
Selection-screens are special screen defined in ABAP.
- This ABAP at run time only controls the flow logic of Selection-screens. The PBO and PAI triggers the num of. selection-screens.
The basic form of the selection screen events is the AT SELECTION-SCREEN event. This event occurs after the runtime environment has passed all input data from the selection screen to the ABAP program. The other selection screen events allow programmers to modify the selection screen before it is sent and specifically check user input.
At Selection-screen OUTPUT is trigerred in PBO of selection-screen.
- This allows you to modify the Selection-screen, before it is displayed.
At Selection-screen On Field is triggered in PAI of selection-screens.
- The input fields can b checked,in the corresponding event block. If an error message occurs within this event block, the corresponding field is made ready for input again on the selection screen.
At Selection-screen On Block is trigerred in PAI event.
- You define a block by enclosing the declarations of the elements in the block between the statements SELECTION-SCREEN BEGIN OF BLOCK block - END OF BLOCK block. You can use this event block to check the consistency of the input fields in the block.
At Selection-screen On value request.
- This event is trigerred for F4 help.
At Selection-screen On help request .
- This event is triggered when the user clicks F1 for help on fileds.

Difference between At selection-screen and At selection-screen field

I need to know the difference between
Difference between At selection-screen and At selection-screen field
Regards
Shashi

Hi,
AT SELECTION-SCREEN is the event triggered in the PAI of the selection screen.
AT SELECTION-SCREEN on field field_name is the event specific to the field and is triggered when u press enter in that field.
AT SELECTION-SCREEN selscreen_event.
Effect
This statement defines event blocks for different events selscreen_event that are triggered by the ABAP runtime environment during selection screen processing.
Selection screen events occur immediately before sending a selection screen and after certain user actions on a displayed selection screen. They assist in selection screen processing in the ABAP program.
AT SELECTION-SCREEN is triggered at least twice during actions on selection screens that are linked into another selection screen as a subscreen - first for the linked selection screen itself, and then for the linking selection screens.
SELECTION-SCREEN FIELD SELECTION
FOR {NODE|TABLE} node [ID id].
Effect
This statement defines a node node in the structure of the logical database for field selection. If a node belongs to type T, you can use the TABLE addition instead of NODE. The statement cannot be used for type C nodes. .
If a node is defined for field selection, you can use an executable program linked to the logical database in the GET statement to control which fields in the node are to be read by the logical database. If you use the function module LDB_PROCESS, the FIELD_SELECTION parameter must be specified accordingly.
for more details check this link...
http://help.sap.com/saphelp_46c/helpdata/en/9f/db9a2e35c111d1829f0000e829fbfe/frameset.htm
Regards,
Priyanka.

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

Need to have pop up window in selection screen and capture the user action.

Hello Friends,
                     I have a requirement, that need to show a pop up window after execution, and to get the action from user using a Push button.
I create a selection screen and a sub screen as window.
After user execute from the selection screen, I am popping up this window.
Window contains some input values to be entered and push button to identify the user action.
I try to capture the user action using sy-ucomm, but it does not hold any value when user press the button.
How to overcome this issue.
Here is the definition of the window.
Pop Up Window for getting values
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW TITLE title .
PARAMETER : p_vdate LIKE t9aa01-validfrom,
            p_dcggt LIKE t9aa01-hkont,
            p_dcgst1 LIKE t9aa01-hkont,
            p_dcgst2 LIKE t9aa01-hkont,
            p_na LIKE t9aa01-hkont.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 20.
SELECTION-SCREEN PUSHBUTTON 2(10) text-001 USER-COMMAND SVE.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF SCREEN 500.
Cheers,
Senthil
Edited by: Senthil on Jan 7, 2008 11:03 AM

Hi,
Try using the below code.
       data : w_var type string.
       CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
         EXPORTING
          DEFAULTOPTION        = 'Y'
           textline1            = 'test '
         TEXTLINE2            = ' '
           titel                = 'check'
         START_COLUMN         = 25
         START_ROW            = 6
         CANCEL_DISPLAY       = 'X'
        IMPORTING
          ANSWER               = w_var.
                 if w_var = 'J'.
                 else.
                 endif.
Comments : J indicates Yes and N indicates No
Regards,
Jeswanth

Background Processing, Selection Screens and Variants

Hi All,
I am having a little trouble Background Processing with Selection Screens and Variants.
When a user runs my report and selects the option of background processing, then they select a checkbox. Once this is checked, they should go and fill in details, press Execute and voila a background process is created. However what is happening is that when i execute it then it asks for a variant. I do not want this to happen. I want the values in the selection screens to be used as default. Here is my code for background processing
FORM START_BACKGROUND_PROCESSING.
CALL FUNCTION 'BP_JOBVARIANT_SCHEDULE'
    EXPORTING
      TITLE_NAME            = 'End Customer Report '
      JOB_NAME              = 'customer_report'
      PROG_NAME             = 'ZSE_SD_SALES'
EXCEPTIONS
    NO_SUCH_PROGRAM       = 1
    OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "START_BACKGROUND_PROCESSING
After the background process is started, all teh data is collated then written to the app server. this is the order
ELSEIF R2 EQ 'X' AND SY-BATCH EQ 'X'.
    PERFORM INITIALIZE_DATA.
    PERFORM SELECT_DATA.
    PERFORM PROCESS_DATA.
    PERFORM GET_END_CUSTOMER_DATA.
    PERFORM WRITE_TO_APP_SERVER.
Any ideas? Points given to those who are helpful

done myeslf

What is a Selection Screen and how to make it ?

What is a Selection Screen and how to make it ? Please explain the process.
Best regards,
Ryan

Selection Screen are used for the program reports. These allows you to input some values that are required to show the desired output.
for example : you want to show the list of sales orders between 1000 to 1999, you would write a select query as this (to make u understand better)
select vbeln from vbak into it_vbeln
             where vbeln GE 1000 " greater than or equal to
               and vbeln LE 1999. " less than or equal to
now if you wnat to do it dynamically, you need a selection screen
tables : vbak. " declaration
selection-screen : begin of block block1 with frame title text-003.
select-options : so_vbeln for vbak-vbeln. " selection range from __ to __
selection-screen : end of block block1.
now you can write the same select query as
select vbeln from vbak into it_vbeln
             where vbeln in so_vbeln.
Hope this is clear now
Regards
Gopi

SUBMIT Zxx VIA SELECTION-SCREEN AND RETURN

SUBMIT Zxx VIA SELECTION-SCREEN AND RETURN
and it's dont make f8 why

wa_rspar-selname = 'P_DEALNO'.
wa_rspar-kind = 'S'.
wa_rspar-sign = 'I'.
wa_rspar-option = 'EQ'.
wa_rspar-low = T_FORDER-DEAL_No.
   APPEND wa_rspar TO rspar.
Submit ZSDR_SALESORDER_DISPLAY
     using Selection-screen '1000'
           WITH SELECTION-TABLE rspar.
orelse
*submit RSEIDOC2 with docnum-low = docnum with
                   credat-low = credat
                           and return.

SUBMIT via selection screen and return gives dump

Hi Guys,
When i have used SUBMIT via SELECTION SCREEN and RETURN, it gave me the selection screen and subsequent report is executed properly without an error and when i pressed back button, it went to selection screen without any issues but the problem is when i press back from the selection screen it gives me a dump. Could you guys think of what would be the probelm.
Thanks in Advance.
Santosh.

Hi Santhosh,
What is the dump u r getting? I tried like this and is working file.
Report1
REPORT Z75694TEST1.
PARAMETERS po_1 TYPE c.
WRITE po_1.
SUBMIT Z75694_TEST VIA SELECTION-SCREEN AND RETURN.
Report2
REPORT Z75694_TEST .
PARAMETERS: po_2 TYPE c.
WRITE po_2.
Thanks,
Vinod.

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

Using Selection screen and selection screen output

Hi All,
I am trying to execute AT SELECTION-SCREEN and AT SELECTION-SCREEN output. Both the para's working fine seperately. But when I execute them together AT SELECTION-SCREEN output is not working. Please let me know how to solve this problem. Please see below for the code.
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
             p_lgort LIKE mard-lgort OBLIGATORY,
             p_rlgort LIKE mard-lgort OBLIGATORY.
    PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
        SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
            PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
        SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
    PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
       SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
            PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
                        p_verid type afpo-verid MODIF ID cp1,
                        p_labst type mard-labst MODIF ID cp1.
       SELECTION-SCREEN: END OF BLOCK b2.
   PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
    IF p_boml <> 'X' AND
       screen-group1 = 'CP1'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    IF p_cmpl <> 'X' AND
       screen-group1 = 'CP2'.
       screen-active = '1'.
       MODIFY SCREEN.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN.
IF p_boml EQ 'X'.
    IF p_AUFNR EQ space.
        MESSAGE e000(z1) WITH 'Please fill Production Order.'.
    ENDIF.
endif.
IF p_cmpl EQ 'X'.
    IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
        MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
    ENDIF.
endif.
Thanks,
Senthil

Hi Senthil,
As far as my knowledge is concerned AT Selection-Screen output and AT Selection-Screen wont work together.In this code you are trying to do the validation in AT Selection-Screen. Instead of that try doin your validations in Start-of-selection Event.
i,e., modify your code as follows:
PARAMETERS: p_werks LIKE marc-werks OBLIGATORY MEMORY ID WRK,
p_lgort LIKE mard-lgort OBLIGATORY,
p_rlgort LIKE mard-lgort OBLIGATORY.
PARAMETERS: p_boml TYPE c RADIOBUTTON GROUP mode user-command flag.
SELECTION-SCREEN: BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_aufnr LIKE aufk-aufnr MODIF ID cp2.
SELECTION-SCREEN: END OF BLOCK b1.
*SELECTION-SCREEN COMMENT 1(44) text-004 FOR FIELD p_cmpl.
PARAMETERS: p_cmpl TYPE c RADIOBUTTON GROUP mode.
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_matnr type marc-matnr MODIF ID cp1,
p_verid type afpo-verid MODIF ID cp1,
p_labst type mard-labst MODIF ID cp1.
SELECTION-SCREEN: END OF BLOCK b2.
PARAMETERS: p_mstr TYPE c RADIOBUTTON GROUP mode.
AT SELECTION-SCREEN output.
LOOP AT SCREEN.
IF p_boml <> 'X' AND
screen-group1 = 'CP1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
IF p_cmpl <> 'X' AND
screen-group1 = 'CP2'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
START-OF-Selection.
Perform validation.
form validation.
IF p_boml EQ 'X'.
IF p_AUFNR EQ space.
MESSAGE e000(z1) WITH 'Please fill Production Order.'.
ENDIF.
endif.
IF p_cmpl EQ 'X'.
IF p_MATNR EQ space OR p_verid EQ space OR p_labst EQ space.
MESSAGE e000(z1) WITH text-003 'Production Version & Quantity. '.
ENDIF.
endif.
endform.
Kindly reward if useful.
Thanks,
pavithra

Selection Screen and Selection Button

Hi,
I have put in a screen this
SELECTION-SCREEN PUSHBUTTON /01(20) p_0031 USER-COMMAND _0031.
But It never enters 'at user-command' event !
What should i do ?

Hi Stephan
If you specify the USER-COMMAND addition, the pushbutton must be assigned a function code fcode. The function code fcode must be specified directly and can only contain a maximum of 20 characters.
Before you can work with the pushbutton, you must specify a TABLES statement to declare an interface work area for the structure SSCRFIELDS from the ABAP Dictionary.
If the user selects the pushbutton on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and the function code fcode is transferred to the ucomm component in the interface work area sscrfields.
Regards
Santosh

Selection screen and smartforms

Hi,
Can somebody share with me simple eg to
enter data via the selection screens and then pass those values to smartform.
i have used the following code.But whenever i execute it the smartform opens first. i want to open the selection screen first.Then after entering the data there ,the smartorm must open up with the entered values.
PARAMETER P_PARAM1 TYPE MYTABLE-COL1.
PARAMETER P_PARAM2 TYPE MYTABLE-COL2.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION '........................................'
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
   PARAM1                    = P_PARAM1
   PARAM2                     = P_PARAM2
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
EXCEPTIONS
FORMATTING_ERROR           = 1
INTERNAL_ERROR             = 2
SEND_ERROR                 = 3
USER_CANCELED              = 4
OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Jay

Hi,
As asked I am sending this piece of a code so that you can get a clear idea for the same.If you face the difficulty again please let me know.
selection-screen begin of block b1 with frame title text-001.
parameters :
   p_carrid type spfli-carrid.          " Carrier Id.
selection-screen end of block b1.
Working variable
data:
f_name      type rs38l_fnam.         " function module name
start-of-selection.
perform open_smartforms.
form open_smartforms .
call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
      formname                 = '<formname>''
VARIANT                  = ' '
DIRECT_CALL              = ' '
   importing
     fm_name                         = f_name
   exceptions
     no_form                          = 1
     no_function_module       = 2
     others                            = 3
if sy-subrc <> 0.
    message id sy-msgid type 'S' number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.                               " IF sy-subrc ne 0
call function f_name
    exporting
ARCHIVE_INDEX                  =
ARCHIVE_INDEX_TAB         =
ARCHIVE_PARAMETERS    =
CONTROL_PARAMETERS   =
MAIL_APPL_OBJ                =
MAIL_RECIPIENT                 =
MAIL_SENDER                    =
OUTPUT_OPTIONS             =
USER_SETTINGS               = 'X'
    p_carr                                = p_carrid
exceptions
   formatting_error         = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled           = 4
   others                         = 5
if sy-subrc ne 0.
    message id sy-msgid type 'S' number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.                               " IF sy-subrc ne 0
endform.                               " OPEN_SMARTFORMS
Regards,
Suvajit.

TO display pop_up on selection screen And chosse that field in 'SELECT' sta

Similar Messages

Maybe you are looking for