To Do's appear sporadically

An Apple tech at the Genius Bar at my local Apple Store reset the Power Management Unit (in an attempt to fix a malfunctioning USB port on my Powerbook).
Since that was done, my To Do lists only show up sporadically in iCal. The ToDo calendars show up on the left hand side but nothing in the ToDo list window.
But, when I synchronize my Palm PDA, the next time I launch iCal the ToDo list items appear, but when I quit iCal and relaunch, they don't show up - ever - until I resync my Palm PDA.
Any help is greatly appreciated!
David

Similar Messages

Beachball. Appears sporadically and spins for anywhere from 2 minutes to 10 minutes or more. While it spins, I am locked out of proceeding. The beachball is multi-colored

Is anyone else experienceing this multicolored beachball spinning interminably and essentially preventing me from using the MAC? This has been happening sporadically for about 3 months. Any ideas appreciated! Allan

"the spinning wait cursor is displayed automatically by the window server when an application cannot handle all of the events it receives. If an application does not respond for about 2 to 4 seconds, the spinning wait cursor appears."
troubleshoot the spinning beach ball:http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html

Homepage appears on start up less than 40% of the time.

My homepage only appears sporadically when starting or rebooting. An hour with one to one couldn't solve. A long conversatiion with Apple help did not solve. Setting a homepage can't be brain surgery. Help?

I am running 10.8.2

.dll and .tgz files appear seemingly at random...

Does anyone out there know what the purpose of these files are?
lsprst7.dll
sysprs7.tgz
They seem to appear sporadically in premier pro project folders every now and then. (I often use Photoshop in conjunction with PrPro. Just thought I'd throw that in).

Jeff Bellune wrote:
Attempting to shed some light:
I found that files named lsprst7.dll, tmpprst.dll and lsprst7.tgz are created in various places on my hard drive. What's the matter with them?
These files are part of the persistence layer of the licensing component used by SparkMaker. Usually these files are created once in the
%WINDIR%\system32 folder, if the user has local administrative privileges. If the user does not have local administrative privileges, these files might be created in the directory containing the Office document you have opened. In order to change this behaviour make sure SparkMaker is executed once from a user having administrative privileges. This user should have write access to the %WINDIR%\system32 folder.
You can extrapolate that information to apply to your system(s). I suspect there is a piece of software on your system that uses the same licensing component as this SparkMaker (or as SafeNet) and that is what is generating the files. These files have been discussed here before, and SafeNet was one likely source of the files. Regardless, it's not Pr or any CS5 suite app.
-Jeff
That's what it was looking like to me too. But Todd_Kopriva seemed to shoot that theory down (reply #8). Hopefully he will elaborate on what their actual purpose is, what is creating them and why.

White screen appears, but won't turn on

I have never had problems starting my iPhone. The battery died, and it won't turn on when I'm charging it. The white screen with the apple appears sporadically, but it doesn't proseed to turn on.

Hello JuliaSk
Start with putting your iPhone into recovery mode so that you can restore it with iTunes. Check out the article below to walk you through that process.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

IllegalStateException while requesting a JSF page

Hello all,
I have a JSF (Oracle ADF) application deployed on a WAS 6.4 (SP 16). The application mostly works fine but sometimes I get an IllegalStateException while requesting a page.
The error appears sporadical and isn't repeatable. After repeating the request the site appears as suggested.
This is the errormessage from the WAS:
Processing HTTP request to servlet [Faces Servlet] finished with error.
The error is: javax.servlet.ServletException: java.lang.IllegalStateException: The operation is not allowed. The HttpServletRequest is not associated with a client request.
Exception id: [0003BA9B5D570043000000160000461000041D51FFBEBD37]
Here is the exception from the default trace:
Processing HTTP request to servlet [Faces Servlet] finished with error. The error is: javax.servlet.ServletException: java.lang.IllegalStateException: The operation is not allowed. The HttpServletRequest is not associated with a client request.
     at com.rheinenergie.lakis.frontend.login.LoginFilter.doFilter(LoginFilter.java:210)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at jcifs.http.NtlmHttpFilter.doFilter(NtlmHttpFilter.java:118)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
The code which produces the error is 'valueBinding.getValue()':
valueBinding = context.getApplication().createValueBinding("#{benutzerStatus}");
benutzerStatus = ((BenutzerStatus) valueBinding.getValue(context));
Has anybody an idea why I sometimes get an 'Operation not allowed' error while requesting this specific managed bean from the faces context?
By the way: the application runes fine on a jboss.
thanks a lot,
Daniel

Hi Daniel,
The reason for this exception is that the WAS uses a pool of request objects. So when one request-response cycle ends, the participated request and response objects are returned back in the pool to be used for next client request.
So this exception means that your application has somehow a reference to request object that is already returned back in the pool and any method invocation on this object is prohibited.
Please check for such behavior.
Regards,
Diyan

Flickering horizontal white stripes on screen

Full Apple Hardware Test passed.
Power Management Unit PMU is reset.
White horizontal stripes covering the picture appear sporadically.
Sometimes entire screen gets white and returns to normal after a while.
Sometimes entire screen is covered with vertical gray scale stripes.
Stripe flickering is synchronized with hard disk or DVD-ROM drive sound.
PowerBook G4 Titanium Mac OS X (10.3.9) 400MHz

Try finding someone who can look at it, thats what i did with my ipod and they fixed the screen and its good as new, may be you need a new screen even tough the screens not smashed or is it?

Issue in Lion re Graphics Not Showing in html Email Signature

After I upgraded to Lion, I created an html signature with the graphics portion residing on Dropbox, and it worked without a hitch until about 10 days ago. Then a question mark in a blue square started appearing sporadically in place of the graphic. Now, in place of the graphic, I'm getting that question mark in a blue square 100% of the time in place of the graphic on Dropbox. The .webarchive file in my -/Library . . . mail/signatures folder that no longer reveals the graphic in my emails, however, works fine when opened up in Safari. I've tried rewriting the code, but it's of no avail. The files open up beautifully in Safari with the graphic, but in the signature box in Preferences and in the emails themselves, it's that blue box that keeps showing up. Does anyone have any idea why I'm not able to access my graphic from mac mail and how I can fix the problem?
Thank you very much in advance for your assistance.

As of two days ago, I am having basically the same problem as described:
imap account on my University, it always synced just fine with my iphone. Two days ago it stopped pulling new messages from the server, and moreover, it also does not show the recent ones it showed already, but only shows me approx. 100 really old messages (6 month old).
Whenever I sync, it pretends to do it (sync date gets updates), but it does not fetch the messages.
On my desktop and on my ipad2 (EXACT SAME SETTINGS), everything is ok, messages are pulled from the server (just as it was ok on my iphone two days ago, and I did not change anything).
When I go to the desktop, and move a new message (one this is not showin up on my iphone) to a subfolder of inbox or to the trash folder, then I suddenly can see this message also in the subfolder or in the trash on my iphone.
I have deleted the account and set it up anew, same result: the same 6 month old messages get uploaded, and that's it. I can delete also these old messages, and then they are gone, but also this does not pull up any additional messages.
Any ideas?
Oliver

IPod music randomly skips songs, stops, starts, uses up battery

I've had a problem that appears sporadically when I go for a long run (over 40 minutes or so). After playing reliably for 40 minutes or so, the IPod on my Iphone 3G starts skipping, stopping and starting randomly, kicks in when I've paused the song, etc.
I tried everything I could think of: I turned off the "shake and shuffle" feature, switched to "airplane" mode just in case there might be a problem with 3g or wifi. The only thing that worked was turning off the Iphone and restarting it. However, when i started the Ipod feature again, the same thing happens.
It's driving me crazy!

Hi Victoria,
First, I'd try a Reset and then a Restore. Just note that by doing a restore, all your music will be removed from your iPod, so make sure it's all backed up somewhere.
Hope this helps,
-Travis

"/System/Library/Extensions/PACESupport.kext"

After finally installing Snow Leopard today and updating to 10.6.4, I've been getting this error message appear sporadically:
System extension cannot be used.
The system extension "/System/Library/Extensions/PACESupport.kext" was installed improperly and cannot be used. Please try re-installing it, or contact the product's vendor for an update.
How can I fix this?
Thanks.

The extension is not an Apple-supplied one. It is an obsolete anti-piracy extension, suppled by Pace Anti-Piracy, Inc. & installed with a few applications such as older versions of Cubase. See Apple > Support > Discussions > Mac OS X v10.4 Tiger > Installation & Setup > PACESupport removal for more info about it & how to get rid of it.

Producer not found error message

We getting a JMSException "Producer not found" when we attempt to send a message to a JMS distributed queue.
          We configuration involves setting up a cluster wide distributed queue with JMS Servers on every node in our cluster for failover and load balancing in the cluster.
          This error appears sporadically across any one node in our cluster. Our deployment environment is WLS 7.0 sp2 on Solaris 8 with JDK 131_06.
          Amit


Please post the whole exception.
          Amit wrote:
          > We getting a JMSException "Producer not found" when we attempt to send a message to a JMS distributed queue.
          >
          > We configuration involves setting up a cluster wide distributed queue with JMS Servers on every node in our cluster for failover and load balancing in the cluster.
          >
          > This error appears sporadically across any one node in our cluster. Our deployment environment is WLS 7.0 sp2 on Solaris 8 with JDK 131_06.
          >
          > -
          > Amit

There is no "add tab or + tab" and no "list all tabs" button. I'm also missing the add-on bar that is supposed to be at the bottom. I'd love to try all the features but it's hard to do without these options.

The first day I downloaded Firefox 4, I had the "+" tab at the end of the tabs but after the first day, it disappeared so to open new tabs, I have to go to the Firefox tab on the left or use ctrl+t to open new tabs.
The "list all tabs" button appears sporadically and today is completely unavailable.
The add-on bar has never been available.
The "feedback" button appeared the first day or so then disappeared, never to appear again!

Create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

After Effects Preview Resolutions and Pixel Bender

Hi,
Hopefully this is a simple fix. I've encountered an issue with PB filters and After Effects's variable preview resolution. Consider this simple kernel:
<languageVersion : 1.0;>
kernel gridTest
<   namespace : "quarterlightpictures.com";
    vendor : "Quarterlight Pictures";
    version : 1;
>
    input image4 src;
    output pixel4 dst;
    void evaluatePixel() {
        float2 coordFloored = floor(outCoord());
        dst.rgb = float3(0.0);
        if(mod(coordFloored.y, 50.0) < 1.0)
            dst.rgb = float3(1.0);
        dst.a = 1.0;
All it does is draw some 1px thick horizontal lines 50 pixels apart. This is fine, of course. However if I set the preview resolution in After Effects to 1/2, the lines are no longer drawn - the comp goes completely black. What I'd expect is the output to be subsampled in AE, and the lines to become 2px thick, but half as bright, which is what happens if I add a Grid effect and do the same.
At 1/3 and 1/4 resolution the lines do appear sporadically - but not everywhere theyr'e supposed to be - and are drawn 3 and 4 pixels thick accordingly.
Does PB work pre-or-post down-res? In other words, does a PB filter run, send its output to AE's comp window and then gets down-ressed for preview (if the resolution isn't full), or does it down-res the dource and pass it to PB? If it's the former then it should just work as I expect. If it's the latter, then are my source dimensions becoming halved, or are my pixel sizes becoming 2x2?
Hope that makes sense. This is causing an issue with a plugin I wrote using PB, with things disappearing when adaptive resolution kicks in.
Thanks,
Christian

I've figured it out.
If you test like so, it works!
     dst.rgb = float3(0.0);
     if(mod(coordFloored.y, 50.0) < pixelSize(src).y)
            dst.rgb = float3(1.0);
        dst.a = 1.0;
Christian

CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE

Any ideas what this means?
Nov 2 15:53:42 c1-145-ap 42: AP:000d.28f2.31ea: *Nov 2 22:53:40.582: %CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE: Attempt to send capwap packet with payload exceeding max size. Payload Size: 2057, Maximum Allowed Payload: 1700Nov 2 15:53:42 c1-145-ap 43: AP:000d.28f2.31ea: -Traceback= 0x5E8E4 0x4B1410 0x43FA08 0x4417E4 0x4429E8 0x2A71ACNov 7 09:24:30 c3-143-ap 61: AP:000c.cea4.8b1a: *Nov 7 17:24:28.630: %CAPWAP-3-CAPWAP_PAYLOAD_TOO_LARGE: Attempt to send capwap packet with payload exceeding max size. Payload Size: 2044, Maximum Allowed Payload: 1700
Nov 7 09:24:30 c3-143-ap 62: AP:000c.cea4.8b1a: -Traceback= 0x5E8E4 0x4B1410 0x43FA08 0x4417E4 0x4429E8 0x2A71AC
These are 1100s in light-weight mode, managed by 5500WLC or WiSMs running 7.0.116 Message appears sporadically, every few weeks, sometimes once in a day, sometimes in bursts, typically from a single AP (out of a flock of ~200 campus-wide), the APs involved tend to live within a particular cluster of buildings.
--sk
Stuart Kendrick
FHCRC

You might as well open a TAC case on this unless one ot the Cisco guy's here can lookup that message. That message is not in the guide for that code you show:
http://www.cisco.com/en/US/docs/wireless/controller/7.0MR1/message/guide/ccx_cdp_cids_7.0MR1_msgs5.html#wp1008858

Screen lag OS X Lion

Hi!
I'm having problems with screen lag on my MBP 13" 2010.
Is there a solution to this poblem?
Is anyone else experiencing this?
Check the picture out!

AppsAndHacks wrote:
Hi,
Try going to System Preferences > Displays and select another resolution than your actual one. Afterwards, go back to your desired resolution. If the problem still isn't fixed, you should call Apple Customer Service (1-800-MY-APPLE) or go directely in an Apple Store. If they think the problem is from Lion, they'll replace your Mac immediately and transfer all your data for free.
Franklin
The problem appears sporadically and isn't consistent. Tried your solution countless times and no real improvement has shown. So I'll doubt they will exchange my 2 year old mac for a new mint one.
@a brody;
Do you mean the software that is on the Mac OS X SnowLeopard install disc? Is it possible to get hold of that one without the disc?

To Do's appear sporadically

Similar Messages

Maybe you are looking for