To download content locally when needed when running TS
Wanna ask, i am doing OSD in SCCM 2012 and all my TS i have set to download content locally when needed when running TS... Questions is:
1) Will it download and copy temporarily only the OS image into the targeted machine or it will download all of the packages that is referenced by the TS into the targeted machine? Reason is because i can only see the downloading progress appear during the
Apply OS steps when running the TS...
2) After completed running the TS, will it remove the previously downloaded file on the targeted machine?
Hi,
1. Yes it will only download the packages that are needed by the installation.
2. It depends, it will remove Images, but applications you install during the Task Sequence will still be in the SCCM Client Cache.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
2. Are you referring to the folder MSICache? Only cache folder that i can see got a lot of the software folders is this MSICache folder. Is there anyway that i can remove it after the TS completed running?
Does this folder also cater for a normal software distribution. Any software that is execute for installation from the software center, will the software files be stored in the MSICache folder as well?
Similar Messages
-
Download content locally when needed by running task sequence functionality with Windows PE.
I am trying to understand what happens when the "Download content locally when needed by running task sequence" option in chosen on a task sequence deployment. My assumption is that any needed packages would not be identified
and downloaded until task sequence is kicked off.
Using task sequence boot media, it looks likes a package has been obtained before any task sequence has been selected. I am assuming the package was acquired during the WinPE boot process. Can anyone confirm that this is
the correct behavior when using the "Download content locally when needed by running task sequence" option? If not, how would WinPE be obtaining the PS100292 SCCM package?
This specific package contains and HTA file. Only one of several task sequences deployed to the All Unknown Computers make a call to the HTA file. The one that does, the HTA call is the very first step of the task sequence.
--TonyHi everyone! I figured what was going on here. I was using an ESX VM and the package was stored on the c:\ from previous attempts and troubleshooting. Long story short, I had to rip the HDD from the VM and add a new one to set every thing back.
-
I'm trying to download sheet music and need to run sibelius scorch add-on in 32 bit model. I have a mac running lion and the latest safari. I have downloaded FireFox 6 and run it in 32 bit but still I can't see the music score to print. Can anyone help?
Hello,
There are no files like that in that folder (com.apple.safari). They all have long numbers with .jpeg or .png at the end. That's what I meant by I cannot find any files like those mentioned in all the helps I read today. BTW-it's still crashing - no particular pattern to it at all.
The only two things I have downloaded recently is a new version of Flash and a Mac-driven update to Office.
Thank you very much for your attempt to help us.
J. -
Which files will be download to local by client when Swing+BC as three tier
i have read adfjclientbcwebstart.pdf . when i read page 25,there is a sentence
In contrast to the local deployment explained earlier, the three-tier deployment
only loads the ADF JClient-specific application files to the user desktop, thus
reducing the overall download size.
i notice there are three files in my application server after i deployed ADF BC as Session EJB. They are ModelEJB.jar,ModelEjbCommon.jar and ModelEjbMT.jar.
i want to know who is ADF JClient-specific application files and will be downloaded to client.
thanks a lot.Think about the process:
Log into SharePoint as test user.
List is empty due to permissions.
Click the Export to Excel button.
??? Who's account is running Excel ???
I'm betting you are still logged into your PC as yourself, not the test user. Excel is running with your permissions when it makes the data connection back to SharePoint, not the test user's permissions.
Also, Export to Excel does not use Excel Services. It uses an HTTP request and as such uses the permissions of the caller (the local PC Excel user, or if hand typed into a browser, the SharePoint logged in user). If hand typed it would look something like
this:
http://sharepoint/sites/Training/_vti_bin/owssvr.dll?CS=109&Using=_layouts/query.iqy&List=%7B48580CAC%2D58CF%2D4C20%2D8CDE%2DD93B56699818%7D&View=%7B4242B9E9%2D665C%2D46FD%2DBADC%2D72FB8AB63ADA%7D&CacheControl=1
Of course you would have to replace the GUID with the GUID of your list and view.
There's a lot of interesting things you can do with owssvr.dll:
Quick views of the XML used in SharePoint for lists
An alternate to web service calls for client side coding (InfoPath,AJAX, Silverlight, JQuery, etc)
Sometimes better than a web service call as you can reference a list's view to get a filtered list, something would usually require a CAML query. Cmd=Display&List={listGUID}&View=viewname&XMLDATA=TRUE
For more about owssvr.dll see:
http://msdn.microsoft.com/en-us/library/ms478653.aspx
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner -
i have a problem, i bought lion but when i want to install he said me i need to "download osx lion server" i'm running with the last lion beta. how to update please?
ps: sorry for my english :SYou apparently are using a version of OS X you did not purchase using your Apple ID. Although you can download Mavericks you cannot install it over your current system. You must repartition your hard drive, then reinstall the version of OS X originally installed when it came new from the factory. That would be on the installer discs that should have come with the computer. If the computer did not come with discs from the factory but OS X was pre-installed (Lion or Mountain Lion) then you can perform an Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
trying to upgrade to OS lion; I am currently running OS X 10.6.8 and have downloaded version 10.7.4 when I go to install it alerts me that I need 10.7 ??
Of course. You need to purchase Lion from the App Store, not download one of the update packages.
-
I attempted to update iTunes yesterday. The update failed. iTunes now won't open and displays an error message that the program isn't localized and needs to be run in the English version. I'm in the US and the computer and program has never been used in another language. I tried reinstalling the full download for the new version and that failed as well. I logged out; shut down; restarted; retried the update; etc. Still no luck and the same message. Thoughts?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I am trying to store music for two different iPods on the same Windows 8 computer, and when I try and download content from the Cloud I get an error message. Is it possible to have two different Apple IDs on the same computer?
Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value). You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
In the absence of that option, you will need to restore the content of your library from its original sources:
Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
Content imported from your CDs will have to imported again
The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these). Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above. As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library. -
When downloading content in Premiere Elements 11, I get an error "no Internet Connection"
When I try to download content (themes, etc) in Premiere Elements 11, I get the message that there is no internet connection. I am connected via LAN and have no other issues connecting.
"Download failed. Either the server is currently unavailable, or your computer is disconnected from the Internet. Check your connection and try again."
I have tried on multiple occasions. I have changed my default browser. I have tried different content (themes, titles, etc) and I have tried to download all or only one item at a time.countrygal+73
SG has given you for details for Premiere Elements 12 when you have Premiere Elements 11.
In Premiere Elements 11 Expert workspace, go to Help Menu/Deactivate. If you see a viable "Deactivate" (which it looks like you have), your program should be activated. In Premiere Elements 12, Adobe has Help Menu/Sign Out as the equivalent of the version 11 Help Menu/Deactivate.
Typically the Content Download depends on Internet connection and Adobe Server. And, the process is for many of us slow. I would give the process another try at another time of the day.
http://atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
Have you tried the process with the antivirus program and firewalls disabled?
Please try again with the antivirus and firewalls disabled and then we all can think about what next.
Thanks.
ATR
Add On...If you have not done so already, please right click the desktop icon for your Premiere Elements 11 and select Run As Administrator even when you are running from a User Account with Administrative Privileges.
In my comments, I have assumed that you are running Premiere Elements 11 on Windows 7, 8, or 8.1 64 bit. Is that the case? -
ITunes Match Crashes - when trying to download content
Has anyone had difficulty with iTunes Match crashing when it is trying to download content?
error message
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.2.31
Application Timestamp: 52627a31
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18229
Fault Module Timestamp: 51fb10c6
Exception Code: 80000003
Exception Offset: 0003491e
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789Hello SandiKling,
You may consider contacting us via telephone if you're having issues with our support site.
Contact Apple for support and service
http://support.apple.com/kb/HE57
Cheers,
Allen -
Help
I downloaded a game that need to pay, but after that when i want to update or download a free game from app. It opens the pilling page again, and can't download or update anything any more, why this happen?Recent crashes of certain multimedia contents (this includes Youtube videos, certain flash games and other applications) in conjunction with Firefox are most probably caused by a recent Flash 11.3 update and/or a malfunctioning Real Player browser plugin.
In order to remedy the problem, please perform the steps mentioned in these Knowledge Base articles:
[[Flash Plugin - Keep it up to date and troubleshoot problems]]
[[Flash 11.3 crashes]]
[[Flash 11.3 doesn't load video in Firefox]]
Other, more technical information about these issues can be found under these Links:
http://forums.adobe.com/thread/1018071?tstart=0
http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html
Please tell us if this helped! -
When I open iTunes, it asks me to download the latest version. When I click on "download now", nothing happens. If I download directly from the iTunes website, do I need to do anything first? Like deleting something?
In the normal course of events, you can update by just running the iTunesSetup.exe. No special precautions need to be taken (beyond those you usually take with an update, or just in general, like maintaining a current backup).
-
How do I keep my downloaded content on my iPhone 4 when connectng to iTunes? It says erase and sync. I want to keep what I have downloaded, and manually manage contend on iTunes. Can I do this without it saying erase and sync?
No backup? Never a good idea to not maintain a backup of your important data. If you do not have a backup, follow these instructions:
By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you formatted your computer, your phone, will see your computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an ipod/iphone is connected under preferences in itunes(under the edit menu).
2. Make sure you have one contact & one event in whatever supported applications you use for contact & calendar syncing. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, itunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
That's as good as it gets without a backup of your itunes library and other important data.. -
Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also
First, do the following:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
When you complete the above re-download your OS X upgrade (not sure which one that is, but I assume Mavericks.) After the download is completed re-install it. Hopefully, this time it will do what you expect. -
I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files
Maybe you are looking for
-
Mail, messages do not arrive in my mailbox until I open he mail applcation
My messages stop coming in my mailbox until i open the mail application. For instance, yesterday it seems that I have received 4 mails. But nothing appears in the dock... It was working before.
-
why does itunes ask if I want to delete all my apps when I try to copy photos from my PC?
-
Hello, I would like to link my ECC 6.0 system with an (outdated..) 620 Content server This works fine for non secure data Now I would like to enable signed url's. for this you need to enable security=1 in the Content server .ini file. Furrthermore yo
-
I'm attempting to arrange the files in a PDF Package in a specific order yet no matter what I do in the DDX it they still get sorted alphabetically. This is a simple example of what I want to do; When the package is displayed Doc1 shows first then Do
-
i am new to this tool. I have OBISE, when i try to start the server, the process takes long time and fails,does not start at all. what to do? i have a rpd created and now to want to view answers.