To drive a monitor from a Mini, is there an advantage to using the Thunderbolt port versus the HDMI port?

Is there an advantage to using the Thunderbolt port versus the HDMI port to drive a monitor?
Can i just plug in my 18" LCD TV to the HDMI port and use it as a monitor?
Thanks, friends ~

Thanks, lllaass,
I have a new Mini arriving tomorrow. It will be replacing my 9 year old iMac.
I have at my disposal an older VGA monitor and a regular LCD TV with
an HDMI input. I'm trying to decide which one will work the best for me. If I use the TV, I won't have to buy
a Thunderbolt to VGA adapter.

Similar Messages

  • Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

    Hi there,
    Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
    Thanks in advance,
    Grtz T.

    I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
    With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
    The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
    You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
    The HDMI Detective should solve your handshaking problems.

  • My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pr

    My aperture library lives on an external hard drive that is corrupt and I can not locate the library. I do have it backed up with TM. How do I safely restore the library from TM to my laptop? I am using the newest version of aperture on my macbook pro.

    Hello Sandra,
    The article linked below details how to go about restoring items from Time Machine in Snow Leopard.
    Mac OS X 10.6: Recovering items using Time Machine and Spotlight
    http://support.apple.com/kb/PH6379
    Sincerely,
    Allen

  • I'd like to carry my system, applications and files on a portable Thunderbolt ssd drive and boot from it.  I have a Mac Pro in the office, iMac at home

    I'd like to carry my system, applications and files on a portable Thunderbolt ssd drive and boot from it.  I have a Mac Pro in the office, iMac at home, a MacBook Air for when I'm on the road, all with TB.  Can a single external TB drive boot all three hardware configurations successfully?  I've been told that differences in hardware configurations between the systems make this impossible.  Is this correct?

    Piece or peace of cake really though.
    A quick install on new hard drive or SSD or 10K and less than an hour to move everything over properly.
    YOU looked for a quick fix and found none and all the brick walls.
    It is not  days of work to do a clean install and migrate.
    There are few if any apps that need to be freshly installed either though there are updates needed for them to be compliant, any driver or plugin also and that is done ahead of time with research.
    And your backup or clone of your system is taken care of - you leave the old system boot drive 'as is' untouched.
    Also, better strategy to move most all your home folder (except for its own ~/Library) to ANOTHER disk drive and not on t he system drive at all.
    As for applications on its own drive or 3rd party, beeen there done that, even SSD or 15K SCSI - no benefit in performance or organization.

  • Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

    Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI  in without any additional  software or graphics adaptor.  I have a 520-1070
    HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not  recognized.

    Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
    If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

    I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

    You would need to get  HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
    If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

  • Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

    Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
    im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
    is there a way to put the IMacs into display mode with out logging into my Mac mini first
    or is there a portable monitor that I can use that will not require me to login first

    This
    Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    says:
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
    How do I exit TDM?
    To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
    Can I use a third-party keyboard or older Apple keyboard to enable TDM?
    Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

  • I downloaded the new os7 on my Ipad mini. Now in order to use the ipad I need to use a passcode. I cannot get pass the login screen and I never set up my ipad to use a passcode. What can I do?

    I downloaded the new os7 on my ipad mini. Now in order to use the Ipad, I need to enter a passcode. I cannot get pass this screen. I did
    not set it up to use a passcode. What can I do? I am not too computer savy.

    I have the same problem. I upgraded to iOS7, entered my usual passcode when prompted in setup, and when I tried to access my iPad after installation was finished it denied my passcode. I can't connect to any internet to erase it or anything because the new iOS hasn't yet been configured to a wifi network, so I can't backup from anything either.
    When I connect the iPad to iTunes, it tells me that Find My iPad must be disabled on my iPad before backup or restore can continue - and I can't access anything beyond the lock screen of my iPad at all because it refuses to accept my passcode, so I can't get to Find My iPad.

  • Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Is there a way to use the time capsule as an external hard drive only and disable the wi-fi function ?

    Yes.
    1) Connect an Ethernet cable from one of the LAN <--> ports on your existing wireless router to the WAN "O" port on the Time Capsule
    2) Go through the standard configuration suggested by the setup "wizard"
    3) Then manually turn off the wireless function using AirPort Utility

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Appl

    I recently migrated my MacBook from 10.5.8 to 10.6.8, using the Snow Leopard CD I purchased from Apple. Since then I have noticed a strange ozone smell coming from the MacBook in the area where the hinges are to open and close the unit. I was told by Apple that it probably is not serious and is coming from the fans in the MacBook. It is true that the smell/odor is more intense when the fans are working. Apple said I should take the MacBook to an Apple Store to have the hardware checked out. Everything seems to be working correctly. I am backing up automatically wirelessly to a Time Capsule, which I had not done until recently, although I had purchased the Time Capsule in 2009. I have not noticed this odor before. Does anyone suspect something more serious that may be going on?

    You may be smelling it because with the new OS the processor is having to work harder causing it to get hotter then it would with the other OS.  I can't say there is nothing wrong, but what could be happening is just that, it's getting hotter so the fan is spinning faster and moving more air so you are getting more of the smell then you would before.  I would still continue to back it up, and take it to the Apple Store at a Genius Bar and have them look at it to make sure.  Was the computer ever in a smoky environment??

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • My husband just got an iphone. I've had mine for a while.  We use the same email address so I though we could use the same apple id and password.  But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes."  Not good.

    My husband just got an iphone. I've had mine for a while.  We use the same email address so I thought we could use the same apple id and password.  But now it appears everything on my phone also shows up on his phone and vis versa, even "Notes."  Not good.  How do I unlink them? 

    Read this planning tips:
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • I have an iphone 4. I disconnected it from my iTunes account but I am still using the iphone and the Apple ID. If I make a purchase will it work? Also, how can I reconnect my iphone to my Apple ID?

    I have an iphone 4.
    I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
    If I make a purchase will it work?
    Also, how can I reconnect my iphone to my Apple ID?

    Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
    If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

Maybe you are looking for