To Extend the length/character in the text column in FBCJ

Hi Experts,
Is there any way to extend the length/character in the text column in FBCJ? If yes then kindly revert me back as soon as possible. My Client needs more characters then the exist one..
Thanks in Advance

Hi
You have two text fields
Addit .text1 with 100 length
Addit text2 with 30 length
If you still need more ask your abaper to check table ISCJ_E_POSTINGS with field text100 and text30
Srinivas

Similar Messages

How to include variable in the text column in report painter?

Dear Expert,
Would like to seek for your help to include How to include variable in the text column in report painter?Please advice.
Thank you.
Regards,
Karen
Edited by: Karen Swee Ping Ho on Jun 17, 2011 2:48 AM

Hi,
Thank you for the promt reply.
1) How I include the variable in the column header to display fiscal year which I have selected from the selection screen?
which variable should i use?
2) Where can i find more information about the characteristic and which variable to be use base on the characteristic?
For example: I would like to display the fiscal year from the selection screen/input screen when execute the report which also will reflected to the element definition and will display the fiscal year also in the column text?
3) Kindly advise base on question 2, the variable that i use in element definition it will also display in selection screen?
4) When execute the report the first selection screen input parameter it obtain from where it is from element definition?
5) Please advice how to be done when report execute with first screen input selection will also reflect the element definition of column and rom with the selection of the fiscal year?
Please help.
many thanks
Edited by: KH on Jun 18, 2011 7:18 AM

How to Display the ColumnName for the Text of any Master Data Object in BEx

Hi Experts,
In Bex Analyzer While Displaying the Key and text of any Master data object it shows column name for master data key but not for the text, here client requirement is he wants to see the Text column name as Description for any master data text.
say Customer Number is a master data object , while displaying key and text of CustomerNumber - column names should look like as below
CustomerNumber    Description
C11111                     Pepco
C11112                     Coke
but usually in Bex Analyzer it displys as following(Text without column Name)
CustomerNumber
C11111                     Pepco
C11112                     Coke
Please suggest how can we achive this requirement, thanks in advance.
Regards,
Chandra

Hi Chandra,
I suggest you to enhance your datasource with text feild, by adding text feild to your datasource in ECC side and replicate it ti BI side.
For this you have to write code at CMOD.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/302d4b15-5847-2a10-93bb-9c45d9f06b16?QuickLink=index&overridelayout=true
Better this doc will help you.
Regards,
rvc

How do I copy the value of a managed metadata field into a text column in the same list?

I have a SharePoint designer workflow that I am trying to use to copy the value of a managed metadata field, into a text field. So basically my workflow is this...
Stage 1: Set [MyColumnValue] to [%Current Item:MyColumn_0%]
Go to End of Workflow
This seems like a simple enough task, but each time an item is added or updated in my List, all I get for my new column [MyColumnValue] is just a link that says "Stage 1". Am I missing something here? Shouldn't this workflow be able to just copy
the value from the managed metadata column to the text column?

When you create a workflow on a list/library it automatically creates a new FIELD with the name of workflow and it's status. It sounds like you're viewing the Workflow status field, and not the field that the workflow is putting the values into. Make sense?
So edit the view and add the new field in.

Anchored graphics in margin intruding into text column

I am creating what is basically a textbook chapter, two columns of text and a wide margin away from the spine. I am positioning some notes in the margin, but also some graphics. Some of the graphics need to be big enough that they intrude into the text column and the text needs to wrap around them. Have done this manually and happy with the results, but would like to have at least some of these graphics anchored to the text. Learning to do this was a long and painful process, and I thought I should document my findings, and ask for any suggestions for improvement.
I found the two following posts of particular use:
http://indesignsecrets.com/wrapping-text-around-an-anchored-object.php
http://blogs.adobe.com/indesignchannel/2007/11/anchored_frames_productivity_s.html
However, the free tool mentioned in the last post is no longer available.
Here is what I did.
First, I set up a couple of keyboard shortcuts.
Edit > Keyboard Shortcuts > Text and Tables > Insert Anchored Object/Go to Anchor Marker > Alt+Shift+I
Edit > Keyboard Shortcuts > Object Menu > Fitting: Fit Frame to Content > Alt+Shift+F
Next, I set up defaults for inserting anchored objects. Note that these preferences are saved in the file, and not in the Preferences.
(make sure nothing is selected) Object > Anchored Object > Insert (Defaults) > Leave defaults except:
- Object Style: SAR Topics Anchored Graphic (or whatever Object Style you wish; mine includes a word-wrap)
- Position: Custom
   - Relative to Spine
   - Anchored Object Reference point: top-left and top-right
   - Anchored Position Reference Point: mid-left and mid-right
   - X Relative To: Page Edge X Offset -3p0
   - Y Relative to: Line (baseline) Offset 2p0 (needed as anchored position ignores the wordwrap when you enlarge the frame to fit objects that intrude into the text frame)
   - Check “Keep Within Top/Bottom Column Boundaries”
I suggest as you are trying this, doing the following until at least you're sure that things are working correctly:
- To view the anchor markers in the text, choose Type > Show Hidden Characters.
- To view a dashed line from an anchor marker to its associated custom-positioned object, select the object and choose View > Extras > Show Text Threads. The thread extends from the anchor marker to the current proxy point for the anchored object.
Place your text cursor where you want your anchored graphic to anchor.
Press Alt+Shift+I.
A default 6p0 x 6p0 frame should appear in the margin.
Click on the graphic you wish to put into the anchored frame. Right-click and copy.
Select the frame in the margin. Right-click and "paste into."
Press Alt-Shift-F and this will fit the frame to the graphic.
This seems to be a reasonably fast and effective workflow.
If anyone has any suggestions for improvement, please let me know.
I do have one problem: when I was playing around with this, InDesign crashed, and the file I was trying to do this on is now corrupted and my Alt+Shift+F won't work; the frame won't resize to fit the graphic. I tried trashing my preferences, but then found out the Insert Anchored Object defaults are stored in the file on which I was working, not the actual two InDesign preferences files.

Luckily I had a recent backup of my file so restored it and got rid of the corruption I mentioned above.
Ran into another apparently unsurmountable problem, as described below, and have abandoned anchored graphics for this project.
If you have two columns on a left page, where the margin is on the far left, anchored objects with wordrap don't work if your anchor is in the second column. That's because ALL of the text in the left column is "before" the anchor, and ignores the anchored object's wordwrap.
Until this is fixed, I'm abandoning anchored graphics and will place them all manually.

G/L Account line item display-text column data missing-t-code faglb03

Dear friends,
MY client requirement like below,
In the GR/IR Clg account no.xxxxxxxxx. the bill no was displayed in the text column. Hence we can compare the debit entry wrt to the credit entry so that the left out credit entries can be traced and booked. The vendor code was displayed against the invoice no.before upgradation.
But now After upgradation this facility is not available.text column data not fletching, If the text [i.e invoice no. } is not available how can we identify which vendor bill was not posted or booked. Which was in this ledger before upgradation.
kindly help me out to sort out this issue.
regards
kalyanam

Hi Cheran
initial screen
Double click on on Accumulated field then it will display you the line item
Text column is displaying at line item
kindly check the Layout if still it does not showing there
then add this field in below Tcode then it will display
Tcode: OBVU
Table : Bseg
Field name : SGTXT
and save it
hope this will help you
Thanks
Trinath

Can't see content of Text Column cells in Resource Usage View

I am having an issue adding a custom pre-defined & pre-populated text column field to resource usage view ( in a pooled resource situation) in microsoft project 2013. It doesn't see how the Text column has been renamed or the content of those column's
cells. Is there a workaround for this? Thanks

TechNew User1111,
Go to the following website and take a look at FAQs 51 and 37. They will provide the answer. If you still have a question, post back.
http://project.mvps.org/faqs.htm
Hope this helps.
John

I had set my passcode by pressing 1 repeatedly till it filled the passcode box. I dont know how many times I have pressed 1. Can someone tell me the character length of the text box of the Passcode

Hi,
My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
Thanks

You can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
http://support.apple.com/kb/HT1808

Field Length of the text field on the screen

Hello Experts,,
I have field with its label on the screen. Now the label text is picked up from data dictionary as defined.
Data element       J_3ARQDA                       Active
Short Description: Requested delivery date
Length           Field   Label
Short             10       RqDlv.date
Medium         16       Req.deliv.date
Long              20      Requested deliv.date
Heading         5        Dldat
Now the text in different laguage say russian is quite bigger in length as compared to english ones. Now on the sales order screen i have the text 'Dldat', but the russian user needs a bigger word than just 'Dldat'.
Approach : I changed the heading length to some '25' from '5' to accomedate the russian text in DDIC for data element. But if i have to adjust the same on the screen with new text length i have to extend the screen border as well.
Is this right approach ? If not how do we actually accomedate the other language texts on the screen with out altering the screen borders ( length and breadth).

Hi Radhika,
I tried doing that with a couple of invoices but I dont see the Long text printed on the check after the automatic payment run. Can you please suggest me if I am missing on anything. I inserted a long text and a '*" before this to have it printed on the check which does not seem to work. Can you please suggest me alternative solution.
   Thanks in advance.
Ramya

Display instantly the length of the text entered in the rich text editor

Hi everybody,
I'm developing an apex application with apex 4.1.1 and Oracle 11.2.
I have a page in which I have a form that allows to create a new message on the database.
A message has a title, description, text and date.
For the text I use the item "rich editor text". The problem is that item doesn't show the length of characters entered (character counter for the textarea). In the database the corresponding column is varchar2(2000). What I do is a validation after submit that checks if the limit 2000 was exceeded or not.
But what I want to do more is to display instantly the length of the text entered in the editor. I have tried to do that through a dynamic action. But the event "onChange" for the item "rich text editor" didn't work.
Has anyone any idea about that issue?
Thanks for helping.
Kind regards,
Edited by: Khadija Khalfallah on Apr 25, 2013 4:06 AM

sorry about that, I missed that tidbit in your OP... well I think there is a good reason why there isn't a count character option -- due to the hidden "html" characters responsible for the "richness" (bold/color, etc) applied to the text would be difficult to count true characters.. if I was bent on doing this, I'd continue using the item you are using, but have a HIDDEN text area that is updated via javascript onkeyup for each keystroke (again, keeping in mind you'd have to filter certain keys) and then that intelligence could be used. I would probably dig through the javascript responsible for the rich text editor (is it still fckeditor??) -- there might already be code in there that isn't clearly visible to you that does this already.. alas, I see now the validity of your challenge.

Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.

No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes.

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
I would very much appreciate any help you can provide! Thank you for your time.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How do I extend the length of a photo in iMovie

I am trying to create a movie using only photos from iPhoto. How do I extend the viewing length of each photo? I have about 90 photos and I'm trying to do a 15-20 min. movie presentation. Right now, each photo only shows up for about 3 seconds. I want them to be on the screen for at least 5-10 before transitioning. Help!

several options:
• select the clip in the timeline of your Project
• drag'n pull the end of the clip to change its duration
or
• double-click the clip in the timeline of your project
• click on i (as info), upper right of screen
• change the numbers in the duration field
or
• select two7a few/all clips in the timeline of your project
• click on 'Adjust' (upper right of iMovies window)
• click on i (as info)
• change the numbers in the duration field

Extending the display duration of text

What property controls the duration a text will be displayed. Currently, I have a 10 second animation, and after adding the text it disappeared after 3 seconds. I have chosen a LiveType font (Iglow) and when I changed the direction property to Ping-Pong (in LiveFont Timing section), the text displayed for longer - which makes sense to me. The first character of a two character Logo disappeared at 5 seconds, and the second character disappeared at 6 seconds
This logo is for gardening segments, so what I'd like to have, is to have the logo appear, animate (rotation), and then have a flock of birds fly overhead, drop a special "package", where the XXX hits the logo causing it to tilt. Rain comes, sun comes out, and the plant grows - which lifts up the tilted end of the logo restoring it to horizontal position.
I have the birds flying overhead, dropping their special package, while the logo appears,rotates, and would have been hit by the bird dropping, but the text disappears from view.
I imagine this is a fairly simple thing, but have missed it when walking thru the properties, and even though I have some effect on the life of the text when I change the Direction property to Ping-Pong I don't really want to change the Direction property.
I'm using Motion 4, but suspect Motion 3 works the same in this particular area

Patrick Sheffield wrote:
Instead of Ping-Pong - how about just a freeze?
LifeFonts are just animations and you'll generally want them to freeze after they've drawn themselves on...
Patrick
I see, now, I can adjust the "hold Last" property in the LiveFont timing and it controls when the text disappears - as I think Mark Spencer is suggesting.
Is there another way to accomplish, or is this what you are suggesting as well?

To Extend the length/character in the text column in FBCJ

Similar Messages

Maybe you are looking for