To find Enhancement
Hi ,
have include program name need to find the Enhancement name for purpose to activate the cmod project ,
Please guide hpw to do it
Regards,
Sant
Do a where-used list of the include & get the name of the exit module.
In MODSAP search using,
TYPE = 'E' AND MEMBER = <function exit name>.
Similar Messages
-
Finding Enhancement for a userexit
Hi All,
I am trying to find Enhancement name for the userexit USEREXIT_MOVE_FIELD_TO_VBAP and so far have tried all suggestions from the experts including, sample program code to find userexits for a transaction, SMOD, SE84 (thru package), etc., etc.. but without any success. Can someone please show me step by step how to find the Enhancement for this userexit. I would greatly appreciate it. Again, no tips, hints, pls. ..just the actual steps for the aforementioned userexit. Once we have this resolved, we could apply this to a lot more exits, which would be a big help as we need the Enhancement name in CMOD.
Thanks & Regards,
TonyThis is special type of the userexit form in the SD area. You will not find it in SMOD, CMOD etc.
You can find this FORM in the program MV45AFZZ.
You need an access key for this program if you are chaning it first time.
MV45AFZZ is the include which cotains all the userexit forms for order processing.
Regards,
Naimesh Patel -
How to find enhancement RSAP0001 user exit EXIT_SAPLRSAP_001 project CMOD
Hi,
I need to find in one system the project in cmod that contains the enhancement RSAP0001 with user exit EXIT_SAPLRSAP_001.
How do I proceed?
Thanks a lotSimon,
Goto CMOD and enter * and select F4 so that you will get the list of packages. Most of the clients we have naming terminology with BW. Pick one of them and go for components there you can see the interface.
Double click on that you will see four classes. Select any one of them and write your logic.
If you provide what exactly your are trying to do enhancements, so that will provide better solutions.
Thanks
Ganesh reddy. -
Hi Friends,
How are you all doing??
Friends relevant answers are awarded points. Pls give solutions..
What are the different ways to find the enhancement spots (i mean user exit points) in ECC 6.0??
I want to find the enhancement spot in sale order transaction (va01/va02) after save happening or else after commit happen. In that i need to call the badi method on_costing_component. So friends could you give solution for this.Hi
You can see this document for knowing the Userexits for a given Trxn.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/userexits%20in%20a%20transaction.doc">Listing UserExits in Transactions</a>
Regards
Raj -
Find the package of a tcd / program, and then find enhancements
how to find package for a tcode
like for me21n is ME
i want find the package for the program of any tcode and so that i can find the enhancement with the help of the package in smod
Edited by: Julius Bussche on Feb 10, 2009 4:26 PM
Please use meaningfull subject titlesHi Rahul,
This code might be helpfull:
report zedgar_user_exits line-size 254. "100.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir,tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
data: l_prog like rs38l-include.
parameters: p_tcode like tstc-tcode. " OBLIGATORY.
parameters: p_actv as checkbox default 'X',
p_sum as checkbox.
start-of-selection.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0 or p_tcode is initial.
if not p_tcode is initial.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname = tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
else.
* SELECT * FROM TADIR INTO TABLE JTAB
** WHERE pgmid = 'R3TR'
* WHERE OBJECT = 'SMOD'.
** AND devclass = v_devclass.
select * from modsapt
where sprsl = sy-langu.
jtab-obj_name = modsapt-name.
append jtab.
endselect.
endif.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
if p_sum is initial.
write: /(19) 'Transaction Code - ', 20(20) p_tcode,
45(50) tstct-ttext.
skip.
endif.
if not jtab[] is initial.
if p_sum is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write: /1 sy-vline, 2 'Exit Name', 21 sy-vline ,
22 'Description', 95 sy-vline.
write:/(95) sy-uline.
endif.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
if p_actv is initial.
write:/1 sy-vline, 2 jtab-obj_name hotspot on,
21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
endif.
tables: modsap.
data: l_1.
clear l_1.
select * from modsap where name = jtab-obj_name
and typ = 'E'.
if p_actv is initial.
select single * from tfdir where funcname = modsap-member.
else.
select single * from tfdir where funcname = modsap-member
and mand = 'C'.
endif.
if sy-subrc eq 0.
if l_1 is initial.
l_1 = 'X'.
if p_sum is initial.
if not p_actv is initial.
write: /1 sy-vline, 2 jtab-obj_name hotspot on,
21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
clear l_prog.
hide l_prog.
endif.
endif.
endif.
data: l_foi like modsap-member.
l_prog = tfdir-pname+4.
concatenate 'L' l_prog 'U' tfdir-include into l_prog.
data: tab_prog type table of d022s with header line.
clear tab_prog[].
data: tab_prog2 type table of d022s with header line.
clear tab_prog2[].
call function 'RFC_READ_REPORT'
exporting
program = l_prog
tables
qtab = tab_prog
exceptions
others = 1.
clear l_prog.
loop at tab_prog.
if tab_prog-line cp '*INCLUDE*'.
replace 'INCLUDE' with '' into tab_prog-line.
replace '.' with '' into tab_prog-line.
shift tab_prog-line left deleting leading space.
write tab_prog-line to l_prog.
call function 'RFC_READ_REPORT'
exporting
program = l_prog
tables
qtab = tab_prog2
exceptions
others = 1.
loop at tab_prog2.
if tab_prog2-line eq space
or tab_prog2-line cp '#**'.
delete tab_prog2.
endif.
endloop.
if not tab_prog2[] is initial.
write: / sy-vline,
21 sy-vline,
modsap-member,
50 l_prog hotspot on intensified,
95 sy-vline.
hide l_prog.
tables: tftit.
clear tftit.
select single * from tftit where spras = sy-langu
and funcname = modsap-member.
if sy-subrc ne 0.
select single * from tftit where spras = 'EN'
and funcname = modsap-member.
if sy-subrc ne 0.
select single * from tftit where spras = 'DE'
and funcname = modsap-member.
endif.
endif.
write: tftit-stext.
l_foi = modsap-member.
endif.
exit.
endif.
endloop.
if l_foi ne modsap-member and p_actv is initial.
l_foi = modsap-member.
write: / sy-vline,
21 sy-vline,
modsap-member color col_negative,
50 l_prog hotspot on intensified,
95 sy-vline.
hide l_prog.
clear tftit.
select single * from tftit where spras = sy-langu
and funcname = modsap-member.
if sy-subrc ne 0.
select single * from tftit where spras = 'EN'
and funcname = modsap-member.
if sy-subrc ne 0.
select single * from tftit where spras = 'DE'
and funcname = modsap-member.
endif.
endif.
write: tftit-stext color col_negative.
endif.
endif.
endselect.
endloop.
if p_sum is initial.
write:/(95) sy-uline.
describe table jtab.
skip.
* FORMAT COLOR COL_TOTAL INTENSIFIED ON.
* WRITE:/ 'No of Exits:' , SY-TFILL.
endif.
else.
* IF P_SUM IS INITIAL.
* FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
* WRITE:/(95) 'No User Exit exists'.
* ENDIF.
endif.
* ELSE.
* ENDSELECT.
* FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
* WRITE:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
if field1(4) eq 'JTAB' and p_sum is initial.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
else.
if not l_prog is initial.
set parameter id 'RID' field l_prog.
data begin of bdcdata occurs 100.
include structure bdcdata.
data end of bdcdata.
data begin of itab occurs 10.
include structure bdcmsgcoll.
data end of itab.
clear: bdcdata[], bdcdata.
clear: bdcdata.
bdcdata-program = 'SAPMS38E'.
bdcdata-dynpro = '0100'.
bdcdata-dynbegin = 'X'.
append bdcdata.
clear: bdcdata.
bdcdata-fnam = 'RS38M-PROGRAMM'.
bdcdata-fval = l_prog.
append bdcdata.
clear: bdcdata.
bdcdata-fnam = 'BDC_OKCODE'.
bdcdata-fval = '=SHOP'.
append bdcdata.
call transaction 'SE38' using bdcdata mode 'E'
messages into itab.
endif.
endif.
regards,
Edgar -
Need to find Enhancement in SMOD for exit FM : EXIT_SAPLJ1AV_007
I need to do some code developments inside FM exit EXIT_SAPLJ1AV_007 which is present inside Function Group: XJ1A.
All the FM inside this FG are for mainly User exits for Argentina.
I am not able to find the Enhancement in Tcode SMOD which is attached to this FM exit EXIT_SAPLJ1AV_007.
I need the name of the enhancement in SMOD attached to this FM EXIT_SAPLJ1AV_007 so that I can implement the same in CMOD.
If anybody knows the enhancement related to this exit FM , then pls let me know.
Thanks in advance
RameshThanks Pankaj.
Already I tried using table MODSAP apart from SMOD.
I was not able to find for this one.
The other 2 exits that u have mentioned that even I was able to find but not this one.
If this exit is not at all linked to any enhancements then I am wondering why SAP has provided this ?
regards
Ramesh -
Unable to find enhancement spot
Hello Guys
I am working on a object where I need to add legacy material number on Warehouse Management Count sheet... The report program is RLLI0400. Transaction code is LI04. The program does not contain any form or any script.. They used Write statement and created a spool.
So to work on this, I have only two options,
1. To identify a enhancement spot and insert there
2. To copy the program into a zprogram and insert there...
I am unable to find the enhancement spot to insert the field there...
So, is there any other way to work on this... Can anyone help me on this......You can always use "implicit enhancement point".
You can add this kind of enhancement at the beggining and at the end of subrutines, functions, etc.
Here is the link with the info
[Implicit Enhancement Options |http://help.sap.com/abapdocu_70/en/ABENIMPLICIT_ENH_POINTS.htm]
1- Enter ehancement mode (the spiral icon)
2- Go Edit u2192 Enhancement operations u2192 show implicit enhancement options
3- Now you will see several grey lines all along the code... this are the places where you can add your enhancement point.
4- Select a line with your cursor and then in the same menu choose create.
greetings -
How to find enhancements for a TCode
Hi,
We are doing a study for upgrading from 4.7 to ECC 6.
For this I would like to know the enhancements done in particular (critical transactions). I have searched on the forum and found 2 approaches.
1) Go to the program of the transaction and in the program search for call customer.
2) Go to the program of the transaction and then take the package of the program and then in SE80 enter package name and then we will get all the enhancements for the transaction.
However for eg for TCode CJ01 when I search the program I am able to find a few customer exits. However when I take the package name in SE80 I do not get any enhancements. So how do I find out the enhancements for a Transaction code (User exits, BADIS, exit programs, etc).
Thanks,
MickHi,
To find the user exits associated, execute following code in SE38
*& Report Y_USER_EXIT_SEARCH *
REPORT Y_USER_EXIT_SEARCH .
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
WRITE: 'sy ucom=', SY-UCOMM.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN. -
How to find enhancement point or enhancement section
Hi,
If anybody is trying to make changes to the approved sale order it shows a message
"SALE ORDER APPROVED BY xx CHANGES NOT POSSIBLE".
i want to know where excatly the enhacement code is written.
Thanks & Regards,
vijay karri.
Edited by: vijaykarri on Jul 8, 2010 11:39 AMHi ,
Please find in the Source code using Search Option with the Message String Or Using the Message No and Whereused List .
Regards,
Kishore.S -
Find Enhancment in TK11 - TK13
Hi all,
I am searching for any enhancement that I can implement when using transaction TK11 or TK12 or TK13.
I need to filter out all conditions that the user does not have authorization to see. Checking the authorization using value field that does not exist in the selection screen of the condition (The enhancement should be after data selected and before data is present in ALV)
*Please, if any one can help....This is very critical step in my project!!!!!!!*
*Thanks sagit*Hi Sangit,
SAPMV13A is the main program that is being called when you press enter after providing the condition type in TK11 initial screen.
Check if you can implement any implicit enhancements as per your requirement.
May be you can go through the following links and check if it they are useful:
http://wiki.sdn.sap.com/wiki/display/ABAP/EnhancementFramework-ImplicitEnhancement-EnhancingstandardtransactionPA30forinfotype0618-Academic+Qualifications
http://help.sap.com/saphelp_nw04s/helpdata/en/5f/103a4280da9923e10000000a155106/content.htm
Regards,
Swarna Munukoti -
How to find the user exits and BADIS from SPRO
Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
MadhaviHi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi -
To find out user exit/ badi for the VT01n transaction triggered in Save
Hi Friends,
I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
Thanking a lot in advance for giving the solution.
With Regards,
Ajit.Hi,
This code will give you all the user-exits.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc <> 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc <> 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Feel free to revert back.
--Ragu -
Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material Plant Grade Price
A 1000 XYZ 25000
A 1000 PQR 35000
A 1000 BCD 45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoudpls allow me to post the questions
-
Need enhancement for KS01 Transaction for Department Filed
Hi Gurus,
Iam having a requirement on KS01 transaction to find enhancement for Department field.
Here I could not find any enhancement Exit to proceed further.
Please let know is there any alternate solution:
Here is my comlete rquirement below:
1.Make the u2018Departmentu2019 field, (CSKSZ-ABTEI), mandatory in the Cost Centre Master Record using screen program name SAPLKMA1 and screen number 0300.
2.Check the entry made in the u2018Departmentu2019 field, (CSKSZ-ABTEI), in the Cost Centre master record
When the transaction KS01 is saved check the value in the u2018Departmentu2019 field, (CSKSZ-ABTEI), against values stored in a variable in a Z table by Controlling Area, if matched allow creation, if no match go to the first message below.
3.Department field is not allowed to be changed once postings have been made to the Cost Centre.
Check for transaction KS02 or KS12 when save check if u2018Departmentu2019 field has been changed, if no change continue, if changed check to see if postings have been made to the Cost Centre (table COEP), if postings have been made give the second error below, if no postings allow changes to be saved.
Thanks & Regards
BhaskarHi,
Check following User Exits in SMOD all are for KS01.
Exit Name Description
COCCA001 Customer enhancement to cost center authorization checks
COCCA002 Customer Functions for Organizational Authorization Checks
COOMEP01 CO-OM: Information system -> line item reports
COOMKA01 Customer Fields for Cost Element Master Data
COOMKS01 Customer Fields for Cost Center Master Data
COOMKS02 Cost Center: Checks When Saving
COOMKS03 Cost Center: BAPI Enhancements
COOMLA01 Customer Fields for Activity Type Master Data
Salil.... -
Issue with Method to find Screen Exit
Hi all,
I am planning to add 2 custom fields to item details tab in ME51N .
I tried to find screen exits using development class of ME51N i.e ME
I went to smod and tried to find enhancements using ME development class and from the list of enhancements i tried to find a screen exit but i could found one.
I found an enhancement
MEREQ001 Customers' Own Data in Purchase Requisition
Which had a screen exit as well and this is what i was exactly looking for.
But my question is that
MEREQ001 is under development class MEREQ
So that means the way i was trying to find the screen exits is wrong or is there a better way to find screen exits
Let me know
ThanksHi,
U will find that if u try this program.
How to Find a Screen Exit in a Given SAP Standard T-code
Program
REPORT YSMOD2 .
TABLES: MODSAP, MODACT, TSTC.
PARAMETERS: INPUT1 LIKE TSTC-TCODE DEFAULT ' ',
INPUT2 LIKE MODSAP-TYP DEFAULT ' '.
DATA: SEARCH1(6),
SEARCH2(3),
SEARCH3 LIKE MODSAP-MEMBER.
DATA : FIRST_ROW VALUE 'Y'.
CONCATENATE: '%' INPUT1 '%' INTO SEARCH1,
'%' INPUT2 INTO SEARCH2.
SELECT * FROM TSTC WHERE TCODE LIKE SEARCH1.
FIRST_ROW = 'Y'.
CHECK TSTC-PGMNA NE SPACE.
CONCATENATE '%' TSTC-PGMNA '%' INTO SEARCH3.
SELECT * FROM MODSAP WHERE TYP LIKE SEARCH2
AND MEMBER LIKE SEARCH3.
SELECT SINGLE * FROM MODACT WHERE MEMBER = MODSAP-NAME.
IF FIRST_ROW EQ 'Y'.
WRITE: /0 TSTC-TCODE, 6 TSTC-PGMNA, 16 MODSAP-NAME, 32 MODSAP-TYP,
45 MODSAP-MEMBER, 70 MODACT-NAME.
FIRST_ROW = 'N'.
ELSE.
WRITE: /16 MODSAP-NAME, 32 MODSAP-TYP, 45 MODSAP-MEMBER, 70 MODACT-NAME.
ENDIF.
CLEAR : MODSAP, MODACT.
ENDSELECT.
IF SY-SUBRC NE 0.
WRITE : /0 TSTC-TCODE, 6 TSTC-PGMNA, 30 'No exits found'.
ENDIF.
CLEAR TSTC.
ENDSELECT.
END-OF-SELECTION.
CLEAR: SEARCH1, SEARCH2, SEARCH3.
End
Regards,
Jagadish
Maybe you are looking for
-
Can't stop applications from opening automatically at login
A few months ago I tried the "open at login" feature for 4 of the applications in my dock. I have decided it is more of a hassle than it's worth and unchecked "open at login." That didn't stop them from opening automatically. I went into Accounts and
-
Safari and Firefox hangs and won't accept online download from any sites
My Safari and also Firefox won't download or process to download everytime I try to download a new update from a site or a software...ect. They do process to the download and then just hang there for a long long time and no download window appear ask
-
Rundll32.exe has stopped responding
When I install Ghost v14 on the T500, after reboot the DVD drive has a yellow exclamation mark on it with "the device is not responding properly" and an error pops up with "rundll32.exe has stopped responding", and also the power Manager icon on the
-
how to restore my ipad
-
File to Idoc - Generate one segment where sourcfields have identical values
Hello Team, This is a Flat File to Idoc scenario where one idoc is generated at the target. As i have mapped the Record(1..unbounded) with the E1MBXYI (1..9999), one record in the file would create one E1MBXYI- segment in the I