To find only master data process chains and its infopacakges!!!!

Hi,
I have a task to remove the setting in the scheduler of directly assigning to data targets instead of PSA and then to data targets of the whole system!!!
i should not touch though the transactional info packages settings!!
these infopackages must exist in process chains -
how to go about this??

Hi,
If I have understand your point, then you want to change the setting of the infopackages that includes in the Process chain pertaining to the master date.
Then you can change the settings directly in the processing tab.
Or if you don't want to change the settings of the IP s that are in the Process chain,then go to RSA1 >> Select those IP s >> rigt click and copy it.Then you can change the settings there.
You can run each IP manually.Or if you want the same chain just with the changed settings,then copy the chain and put this new IP in place of the old one and schedule the chain.
If your doubts are cleared then kindly assign me some points.
Regards,
Debjani..

Similar Messages

System Master Data Process Chain

Hello Guys,
I am working on Admin cockpit. So far it s going well. However, I am struglling with scheduling System Master Data Process chain. When I look at its logs, I see that Operation Type (WHM)- Texts becomes red and Attribute Change Run (final step) has not finished yet(almost three hours) Please help.
Thank you,
OLGA

refer this..similar issue is discussed Alpha Conversion
Non Alpha Compliant Value..hw can this be resolved on BI 7.0 SP 13

Master Data Process chains failing due to special charecters?

hi experts,
we have done all the master data(FI,SD,LO,QM,PM,MM,PP,PS) and created process chains and transported into production system.
when we run the process chains we are facing lot of issues regarding special charecters.
for example. 0MAT_VEND_ATTR Data source.
MATERIAL VENDOR (field - IDNLF).
'UDGÅET
&''UDGÅR
&''UDGÅET
&''36/5599/LED./FÆLLES
&''SØTRANSPORT &
those are the special charecters are coming when i try to execute through RSKC the above Material Vendors, its giving different special chars for different MATERIAL VENDORS like below.
FÆLLESSØTRANSPORT
04/5160/FORSØGSAFD.
(5150)FORSØGSAFD.
like that there are about 15 master data chains are failing.
due to that reason the below transcation chars are not executing.
please suggest me is there any routine or is there any procedure to take care of unpredicted special charecters loading successfully into BW.
regards
venuscm

I don't think its a global setting problem.
Permit the char in RSKC...
Check with the functional team why they are getting Special char values in the loads. ask them to rectify the special char so that you can extract the same to BW side.
go through the blog links provided earlier in my post...
Check the below link which might be of some use to you,..
/people/jyothi.velpula/blog/2010/12/23/removing-invalid-characters-using-field-routine
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0afbb81-f219-2c10-4181-b20f6b10e373?quicklink=index&overridelayout=true
Edited by: prashanthk on Jan 3, 2011 5:35 PM

Master data Process chain running long time

Dear SDN Team,
PC Process Chain: General Master Data - time running is about 4.5 hours . how we can improve running time.
There are 15-25 info objects are loading from this process chain.
any steps to improve the performace
thanks and kind regards,
Lakshman Kumar G

Hi,
Go to the function module RSD_IOBJ_GET to find the object name of the dimension. Go to SE37 & proceed as follows.
I_IOBJNM = 'Info Object Name'
I_OBJVERS = 'A'
I_BYPASS_BUFFER = 'X'
and then Execute the FM.
Double click on the "'E_S_VIOBJ'" and find the number in the field 'u201ENUMBRANR‟'
and add BIM to the number taken from NUMBRANR.
Goto SNRO T-Code and enter BIM+the number and edit.
From Edit--> Set up Buffering --> Main memory, select the buffering check box and enter approx 500.
This needs to be done for all the master and your dataload performance would improve.
Regards,
Mani

Master Data process Chains

Hi All,
I have activated all the required Master Data Datasources in R/3 in which some are delta enabled like Customer and Material(along with Sales and Comp. Code views), some are not delta enabled like Sales Org, Sales Grp etc...and some are text fields like Customer Grp 1-5, Material Grps 1-5 distribution channnel text etc.
Now, I have to create process chains to regularise the loads for this data once we go live.
But, I am not sure, how many process chains do I need to create?
Should I include all the delta enabled ones in one chain and the others in another chain?
Do we need to load the non-delta(i.e full loads) ones also daily?
How about the Text datasources like Cust Grps1-5?
Thanks,
RPK.

I have struggled with some of those same questions, and finally ended up deciding simplicity was important.
My Daily Master Data loads go like this -
-- MetaChain - ZMD_D_METACHAIN - contains 3 subchains, one each for attributes, hierarchies, and texts.
Attributes - ZMD_D_ATTRS ( I don't distinguidh between Full and Delta). I have them all in one chain. I originally thought about having different chains, and decided to have them all in one chain - 6 different threads, all in one PC. This makes it easy to move different loads around if some MD takes longer to load - goal is to have all 6 threads run approx the same amount of time. These 10 threads flow into a Change Run. In the Meta Chain, I have the ZMD_D_ATTRS local chain send out a positive or negative completion e-mail.
I have a few subchains in this one, e.g. I load 0Fund, and then have 4 loads that populate Z attributes of the Fund MD. In this case, I use put these loads in a subchain - first the 0Fund load, followed by the various load of Z attributes. This way I'm sure everything loads in the correct order - not having two concurrent loads to the same MD tha tmight cuase a lock issue. It also helps document the relationships.
Hierarchies - ZMD_D_HIERS. Don't have a lot of them, but I found it cleaner to separate the mfrom the Attrs.
Texts - ZMD_D_TEXTS. I have about 10 threads that each load about 12 texts.
Some have argued to load Texts after Transactions, but it our case, none of these load all that long so I didn't pursue that. I also have a sepate PC to my MD problem children - 0HRP0SITION and 0PERSON whihc seem to have errors on a semi regular basis. Having them in a separate PC - not in the Daily MD MetaChain - means my Daily MD MetaChain rarely has an error and makes it easy to monitor. If its red, I know I have a problem (also received a msg from the PC telling me that), where as if I had a load that frequently failed mixed in, I would have to always check to see if the failure was the Problem Child, or a MD object that doesn't normally cause a problem.
Hope this helps. Wish SAP really provide more guidance on PCs. Ought to have a contest on SDN - Most Creative PCs......

Master data process chain

Hi All,
I was asked to create masterdata process chain for info objects........WBS element, cost element,project and fund.......
So for these do i need to create process chain for each info object or else i have to create one for each infoobject?
Please post some suggestions and steps.
Regards

Hi Raj........
Yes..........u can include all these three in one Process chain........not a problem.............but obviously it depends on ur requirement......
Look.........for WBS element........there is Attribute,Hierarchy,Text.............for us Attribute is Critical.........so it is getting loaded as a part of a Critical chain..........Hierarchy and Text are included in the same chain............but u can included in one chain...........but remeber..always load in series.........not in parallel.........bcoz.........even attibute,text and hierarchy will lock each other........
cost element also hav Attribute,Hierarchy,Text..........for us it is getting loaded as a part of a FC chain......since it belongs to the FC area.........but u can include this in the same chain........
For project we r loading only text..........now for us it is non critical............we r loading it in the same chain of WBS element......
None of them has any Reference Characteristics............so u just include all of them in a single chain in any sequence......
Regards,
Debjani.....

Change in the model of Process chain and its impact

Hi,
We have lot of infopackages included in the Process chains which has the processing type as "PSA only and then update subsequently in data targets".
Now i had changed some of the infopackages to the processing type as PSA and then into the data targets option!
But in the process chain the process type update from PSA is still existing!
I am not sure whether i should remove this process type in process chain after changing the process type in the scheduler
Any ideas?
Raj

hi raj,
do not remove the PSA & update step as it is a fulproof method for the data load.
if u'll try to remove and activate the Process chain it will show warnings but still activate the chain.
the data load sometimes may get loaded and other times it may not reflect in the data target although the step will be green in the process chain.
regards,
arvind.

Error while executing master data process chian

hi,
I'm trying to execute Master Data Process Chain in BI 7.0. But i'm getting errors at the DTP process of two info objects. The error message is like "equest 357 is already being processed and Exception CX_RSBK_REQUEST_LOCKED logged."
Can anyone tell the reason and how to resolve this issue?
Thanks
Hima

Hi Hima
Check if there is any other loads, fetching the same Request OR you can goto SM37 and goto Job log and check the status of the JOB... if it is finished, then check the status of the request too.You can repeat the locked request, if the previous req is either successfully completed or failed...wait until the dependent request is finished
just check this and repeat the req.. it should get successful now...
Regards
Rohit

How to find triggering job for Process chain

Hi,
I have a process chain and its triggering by some other system using an event.
I want to know how to find which ystem is triggering this job means process chain and on what basis it is starting?
I have an event for this process chain and also FM : BP_EVENT_RAISE. So how to find the with those details?
Thanks,
Phani

HI,
some other system means either dev, qas, prd?
for every process in a process chain there is a chain id which is same as the name of your chain,
for every chain id there exist some log ids , this both information you can find from the standard table RSPCLOGCHAIN
From this log id you can find the status of the process from table RSPCPROCESSLOG.
here u will find the status of your process whether is has been completed successfully or ended with errors.
Thanks,
Phani.

How to find deleted process chain and query

Hi All
Some body has deleted one process chain and one query from development system
how can i know who has deleted these?
is there any table where deleted process chain and queries will maintain????
Thanks & Regards,
Krishna
Edited by: krishnamurthy g on Sep 1, 2008 5:33 PM

Hi,
Usually its totally in tractable to find a deleted chain :
But you can try out with the following options:
1> T-code SLG2 .
2> T-code SLG1 - find out who was logged on to the system on that particular client at that time.
3> Try out the following tables in se16 :
RSPCLOGS --- Application Logs for the Process Chains
RSPCLOGCHAIN --- Cross-Table Log ID / Chain ID
RSPCCOMMANDLOG --- System Command Execution Logs (Process Chains) .
Hope it will be expedite.
Thax & Regards.
Vaibhave Sharma

Authorization objects for Process chain and Data source in BW 3.x

Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
Bharat

Hi bharat
I dont thin these objects are part of 3.0
check from SU03 weather these objects are present in 3.o box
In 7.0 they exist:
http://help.sap.com/saphelp_bw33/helpdata/en/8b/134c3b5710486be10000000a11402f/frameset.htm
TO see weather these objects exist:
Go to Tools -> Administration ->User maintenance ->Information System -> Authorization objects -> Authorization objects by Complex Selection Criteria -> By Object Class. For the object class, enter either RS (for Business Information Warehouse objects)
OR
S_BCE_68001413 (Tcode for this rep)
Thanks,
Raj

Authorization objects for Process chain and Data sources in BW 3.x version

Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
Bharat

its the same thread again
/community [original link is broken]
Thanks,
Raj

How to find all the Master data extract structures and Extractors

I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
Sasanka

Hi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet

How to find active master data source in the bw system

Hi
Can anyone guide me how to find the active master data source in the bw system

Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.

Deleting Data/ Process Chains

Hi All,
        I want to delete data from a number of cubes, and also after deleting I want to make sure that no data is to be loaded into these cubes via any process chains that are already present and loading. My Question is by looking at a cube how can I find out if a process chain is doing so?

I found them,. If I do not see process chains does that mean that particular cube is not in process chains?
Message was edited by:
        xcaliber
Message was edited by:
        xcaliber

To find only master data process chains and its infopacakges!!!!

Similar Messages

Maybe you are looking for