To find the access MM01 assigned to users?
Hi all,
i have to take out list of user having access for MM01 (create material), when i use SUIm to get the list it shows all the list of users including the users with DISPLAY & CHANGE, but i want only those users who had the access of CREATE & CHANGE.
please help out me, its very urgent.
Thanks & Regards
Syed..
Hallo.
M_MATE_MAT is the object interested.
To take out your list:
SUIM -> Roles -> by Authorization values -> M_MATE_MAT -> Activity 01 or 02
or agr_1251 tabelle in transaction SE16
OBJECT M_MATE_MAT
FIELD ACTVT
in LOW 01 to 02
Best Regards
A.D.F.
Similar Messages
-
LGBD390 blu-ray cannot find the access point of WRT160N/3.
I have been trying to set up the wireless connection to be able to view streamed movies from netflix through my LGBD390 blu-ray player. I have successfully connected the wireless router to my Embarq router. When I check status, it says it is enabled and connection is o.k. I have been on the phone with Linksys (and was charged $9.99 which did not solve my problem). I also have chatted and so far that has not worked either. I have downloaded the upgrade for the firmware. No matter what I do, the blu-ray cannot find the access point of the router.
Can you help?thank you for your responsse Wizzard, but there are things I need to change that I don't know how to do. I have no idea how to assign static ip, subnet and gateway on the blu-ray. When I went to the link , it was actually for adifferent router than mine. I have a WRT160N/v3. I also did not know what to put in the protocol. and if I should just put the number in the beg. and ending. I also don't think I have an ethernet adapter. Maybe you could give me more information. Thanks in advance.
-
Internal error: Unable to find the access rule.
I have a Cisco ASA 5550 and using ASDM 6.2.
Opening the ASDM, in Firewall Dashboard, in Top 10 Access Rules, show the second rule with more hit: "interface X | source: any | Dest: any | Service: ip | Action: Permit.
During the day, the hits increase and decrease.
Well, the problem: That rule there isn't.
When I click with the right mouse button and click on show rule, a message is displayed:
"Internal error: Unable to find the access rule."
I can't find the rule in Configuration Mode and in Console Mode.
Well, the rule there isn't.
What can I do for this rule disappears from the Top 10 Dashboard?I suggest opening a case with Cisco TAC. This could be an issue with the device itself.
Please remember to select a correct answer and rate helpful posts -
Way to find the access of tcodes in BIW
Hi All,
Is there any general Tcode to find the authorized tcodes in servers (like production .develop etc) with respect to one loginid ..or is there any other way to find it out,...
if not please provide the list tcodes that will be required to analyze entire BIW MODULE....
Thanks and Regards
SivaHi Siva,
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDDV Maintaining Aggregates
RSIMPCUR Load Exchange Rates from File
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
r/3 (bw related)
SBIW BIW in IMG for OLTP
BD61 Activate Change Pointers - Generally
BDLS Convert Logical System Names
BF11 Application Areas
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
LO setup table
OLI1BW INVCO Stat. Setup: Material Movemts
OLI2BW INVCO Stat. Setup: Stor. Loc. Stocks
OLI3BW Reorg.PURCHIS BW Extract Structures
OLI4BW Reorg. PPIS Extract Structures
OLI7BW Reorg. of VIS Extr. Struct.: Order
OLI8BW Reorg. VIS Extr. Str.: Delivery
OLI9BW Reorg. VIS Extr. Str.: Invoices
OLIABW Setup: BW agency business
OLIFBW Reorg. Rep. Manuf. Extr. Structs
OLIIBW Reorg. of PM Info System for BW
OLIQBW QM Infosystem Reorganization for BW
OLISBW Reorg. of CS Info System for BW
OLIZBW INVCO Setup: Invoice Verification
TSTCT IS THE TABLE WHICH CONTAINS TRANSACTION CODES
TO GET LIST OF TRANSACTION CODES IN BW
1.GO TO SE93
2. PRESS F4
3. IN THE SEARCH TYPE RS* TO GET THE LIST OF TRANSACTION CODES STARTING WITH RS.
Here r the some of the transaction codes used by BW developers
RSBO INFOSPOKE
RSBOMO2 OPEN HUB MONITOR
RSBOH1 OPEN HUB MAINTANENCE
RSBOH2 OPEN HUB MAINTANENCE
RSBOH3 OPEN HUB MAINTANENCE
RSBO_EXTRACT AUTHORIZATION CHECK OPEN HUB EXTRACTION
RSA1 ADMINISTRATOR WORK BENCH
RSA3 EXTRACTION CHECKER
RSA5 TRANSFER BUSINESS CONTENT
RSA6 POST PROCESS OF DATA SORUCES
RSA7 DELTA QUEUE MONITOR
RSA8 DATA SOURCE REPOSITORY
RSA9 TRANSFER APPLICATION COMPONENTS
RSADMIN MAINTENANCE VIEW
RSATTR ATTRIBUTE HIERARCHY RUN REALIGNMENT
RSBBS QUERY JUMP TARGER
RSD1 MAINTAIN INFO OBJECT
RSDBC DB CONNECT
RSDDV AGGREGATE MAINTANENCE
RSDL DB CONNECT TEST PROGRAM
RSH1 EDIT HIERARCHY
RSH3 SIMULATE HIERARCHY
RSIMG BW IMG
RSIS1 CREATE INFO SOURCES
RSISET MAINTAIN INFO SETS
RSKC MAINTAIN PERMITTED CHARACTERS
RSMO MONITOR
RSO2 GENERIC DATA SOURCE
RSO3 SET UP DELTA FOR GENERIC DATA SOURCE
RSPC PROCESS CHAIN MAINTENANCE
RSRAJ START REPORTING AGENT JOB
RSRT REPORT MONITOR
RSRTRACE SET TRACE CONFIGURATION
RSRV ANALYSIS AND REPARI OR BW OBJECTS
RSSM AUTHORIZATIONS FOR REPORTING
RSSMQ START QUERY WITH USER
RSSU53 DISPLAY BW AUTHORIZATION CHECK
RSZC COPY QUERIES BETWEEN INFO PROVIDERS
RSZDELETE DELETE QUERY OBJECTS
RRMX TO GO TO BEX REPORTING FROM RSA1
SM37 JOB SELECTION/STATUS
SM38 ABAP EDITOR
rsa11 InfoProvider
rsa12 InfoSources
rsa15 PSA
RSODS EDIT ODS
RSD1 EDIT INFO OBJECT
SU53 CHECKING FOR AUTHORIZATIONS
RS00 Start menu
RS12 Overview of master data locks
RSA0 Content Settings Maintenance
RSA1 BW Administrator Workbench
RSA10 Realtime Test Interface Srce System
RSA11 Calling up AWB with the IC tree
RSA12 Calling up AWB with the IS tree
RSA13 Calling up AWB with the LG tree
RSA14 Calling up AWB with the IO tree
RSA15 Calling up AWB with the ODS tree
RSA1OLD BW Administrator Workbench (old)
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSADMIN RSADMIN maintenance
RSADRTC70TOADR11 Conversion of table TC70 in ADR11
RSANWB Model the Analysis Process
RSANWB_CRM_ATTR Fill CRM Attributes
RSANWB_EXEC Execute Analysis Process
RSANWB_IMP Calculation of Importance
RSANWB_START_ALL Model the Analysis Process
RSANWB_SURVEY Analysis Process: Create Target Grp
RSAN_CLTV CLTV Modeling
RSAN_CLTV1 CLTV
RSAN_RESP Response Prediction Models
RSAN_RFM RFM Modeling
RSAN_SALES_PL_CALL Execute Sales Planning
RSAN_SURV_SHOW BW Survey
RSAN_SURV_TG BW Survey: Target Group Management
RSAN_VERI Analysis Process: Test Monitor
RSAN_WB_TST IMC Wrapper Transaction for Testing
RSARCH_ADMIN BW Archive Administration
RSARFCEX Variant for RSARFCEX
RSASSIBTCH Schedule Assistant in Background
RSATTR Attribute/Hierarchy Realignment Run
RSAWB New AWB
RSAWBSETTINGSDEL Delete user settings of the AWB
RSB0 Maintain OLAP authorization object
RSB1 Display authorization object
RSB2 Data Marts Generation Center
RSBBS Maintaining BW Sender-Receiver
RSBBS_WEB Transaction for the RRI in the Web
RSBCTMA_AC xCBL Action Codes
RSBCTMA_DT Mapping of Ext./Int. Document Type
RSBEB Business Explorer Browser
RSBMO2 Open Hub Monitor
RSBO Open Hub Maintenance
RSBOH1 Open Hub Maintenance
RSBOH2 Open Hub Maintenance
RSBOH3 Open Hub Maintenance
RSBO_EXTRACT Auth Check Open Hub Extraction
RSBROWSER BW Browser
RSBWREMOTE Create Warehouse User
RSCATTAWB CATT Admin. Workbench
RSCDS Summarization routine
RSCONCHA Channel conversion
RSCONFAV Favorites Conversion
RSCRMDEBUG Set Debug Options
RSCRMISQ Regis. of Infosets for Target Groups
RSCRMMDX Edit MDX
RSCRMMON Monitor Query Extracts
RSCRMSCEN Regist. Closed-Loop Scenarios
RSCRM_BAPI Test Program for RSCRM Interface
RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
RSCRT BW Monitor (Near)-Real-Time Loading
RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
RSCR_MAINT_URL Maint. of URL Variables for CR/CE
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV1 BW Customizing - View 1
RSCUSTV10 BW Customizing - View 10
RSCUSTV11 BW Customizing - View 11
RSCUSTV12 Microsoft Analysis Services
RSCUSTV13 RRI Settings for Web Reporting
RSCUSTV14 OLAP: Cache Parameters
RSCUSTV15 BW Customizing - View 11
RSCUSTV16 BW Reporting
RSCUSTV17 Settings: Currency Translation
RSCUSTV18 DB Connect Settings
RSCUSTV19 InfoSet Settings
RSCUSTV2 BW Customizing - View 2
RSCUSTV3 BW Customizing - View 3
RSCUSTV4 BW Customizing - View 4
RSCUSTV5 BW Customizing - View 5
RSCUSTV6 BW Customizing - View 6
RSCUSTV7 BW Customizing - View 7
RSCUSTV8 BW Customizing - View 8
RSCUSTV9 BW Customizing - View 9
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSD5 Internal: Maint. of Techn. Chars
RSDBC DB connect
RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
RSDB_INIT Initial Download of D&B Data
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSDL DB Connect - Test Program
RSDMD Master Data Maintenance w.Prev. Sel.
RSDMD_TEST Master Data Test
RSDMPRO Initial Screen: MultiProvider Proc.
RSDMPROD Initial Screen: MultiProvider Proc.
RSDMPROM Initial Screen: MultiProvider Proc.
RSDMWB Data Mining Workbench
RSDODS Initial Screen: ODS Object Processng
RSDODSD Initial Screen: ODS Proces. (Deliv.)
RSDPMDDBSETUP Creates a MOLAP Database in MSAS
RSDPMOLAPDS MOLAP DataSource creation
RSDPRFCDSETUP Create MOLAP Rfc Tests
RSDSD DataSource Documentation
RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
RSDV Validity Slice Maintenance
RSD_ACAT Maintain InfoObject catalog
RSEDIT Old editor
RSEIDOCM Variant for RSEIDOCM
RSENQ Display of Lock Log
RSEOUT00 Variant for RSEOUT00
RSFH Test Transaction Data Extractors
RSFLAT Flat MDX
RSFREQUPL Frequent upload from source systems
RSGWLST Accessible Gateways
RSH1 Edit hierarchy initial screen
RSH3 Simulate hierarchies
RSHIER Hierarchy maintenance w/o AdmWB
RSHIERINT Hierarchy maintenance from AdmWB
RSHIERSIM Simulate hierarchies
RSICUBE Maintain/Change InfoCubes (Internal)
RSIMG BW IMG
RSIMPCUR Load Exchange Rates from File
RSINPUT Manual Data Entry
RSIR_DELTATRACK KPro Delta Tracking
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLDAPSYNC_USER LDAP Synchronization of Users
RSLGMP Maintain RSLOGSYSMAP
RSMD Extractor Checker
RSMDCNVEXIT Conversn to Consistent Intern. Vals
RSMDEXITON Activate Conversion Routine
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSMONCOLOR Traffic light color in the Monitor
RSMONITOR_DB D&B Integration
RSMONMAIL Mail Addresses for Monitor Assistant
RSNPGTEST Test Network Plan Control
RSNPGTEST2 Test Network Plan Control
RSNSPACE BW Namespace Maintenance
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
RSOCONTENT Administration of a Content System
RSOCOPY Copy from TLOGO Objects
RSODADMIN Administration BW Document Managemt.
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSPFPAR Display profile parameter
RSQ02 Maintain InfoSets
RSQ10 SAP Query: Role Administration
RSQ11 InfoSet Query: Web reporting
RSRAJ Starts a Reporting Agent Job
RSRAM Reporting Agent Monitor
RSRAPS Manages Page Store
RSRCACHE OLAP: Cache Monitor
RSRCATTTRACE Catt transaction for trace tool
RSREP BW Administrator Workbench
RSRFCCHK RFC destinations with logon data
RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
RSRQ Data Load Monitor for a Request
RSRR_WEB Report-Report Interface in Web
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
RSRVALT Analysis of the BW objects
RSR_TRACE Trace Monitor
RSR_WEB_VARIABLES Variable Entry in Web
RSSCD100_PFCG Change Docs for Role Administration
RSSCD100_PFCG_USER for Role Assignment
RSSCM_APPL Application settings SCM4.0 and BW
RSSD Access for scheduler
RSSE Selection start InfoCube
RSSGPCLA Maintain program class
RSSG_BROWSER Simple Data Browser
RSSM Authorizations for Reporting
RSSMQ Start Query with User
RSSMTRACE Reporting Log Authorization
RSSTARTMON Starting the monitor in parall.proc.
RSSU53 Display authorization check BW
RST22 Old Short-Dump Overview
RSTB Choose Object Name
RSTBHIST Table history
RSTG_BUPA Target Group Sel. Business Partners
RSTG_CUST Target Group Selection Customers
RSTG_DB Target Group Selection D&B
RSTG_DB_WEB Target Group Selection D&B
RSTPRFC Create Destination for After-Import
RSU0 Update rules overview
RSU1 Create update rules
RSU1I Create update rules
RSU1O Create Update Rules
RSU2 Change update rules
RSU2I Change update rules
RSU2O Change Update Rules
RSU3 Display update rules
RSU3I Display update rules
RSU3O Display Update Rules
RSU6 Delete update rules
RSU6I Delete update rules
RSU6O Delete update rules
RSU7 Data Extraction: Maintain Parameters
RSUSR003 Check standard user passwords
RSUSR200 List of Users per Login Date
RSWELOGD Delete Event Trace
RSWEWWDHMSHOW Display Background Job SWWERRE
RSWEWWDHSHOW Display Work Item Deadline Monitorng
RSWWCLEAR Execute Work Item Clearing Work
RSWWCOND Execute Work Item Rule Monitoring
RSWWDHEX ExecuteWorkItemDeadlineMonitoring
RSWWERRE Start RSWWERRE
RSZC Copying Queries between InfoCubes
RSZDELETE Deletion of query objects
RSZT Get Test Component
RSZTESTFB Shortcut Function Test Environment
RSZV Call up of view V_RSZGLOBV
RSZVERSION Set frontend version
RS_AWB_REMOTE Remote AWB Staging
RS_BCT_BWBEOTYP Maintain BW Backend Object Types
RS_DS_CHECK Check consistency request
RS_ISTD_REMOTE Maintain InfoSource
RS_LOGSYS_CHECK Source System Tool
RS_PERS_ACTIVATE Activation of BEx Personalization
RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
RS_PERS_VAR_ACTIVATE Activate Variable Pers.
RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
SP01 Spool
RSA1 BW Administrator Workbench
RSA11 Calling up AWB with the IC tree
RSA12 Calling up AWB with the IS tree
RSA13 Calling up AWB with the LG tree
RSA14 Calling up AWB with the IO tree
RSA15 Calling up AWB with the ODS tree
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining
Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSDL DB Connect - Test Program
RSDMD Master Data Maintenance w.Prev. Sel.
RSDMD_TEST Master Data Test
RSDMPRO Initial Screen: MultiProvider Proc.
RSDMPROD Initial Screen: MultiProvider Proc.
RSDMPROM Initial Screen: MultiProvider Proc.
RSDMWB Customer Behavior Modeling
RSDODS Initial Screen: ODS Object Processng
RSIMPCUR Load Exchange Rates from File
RSINPUT Manual Data Entry
RSIS1 Create InfoSource
RSIS2 Change InfoSource
RSIS3 Display InfoSource
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE18 Business Add-Ins: Definitions
SE18_OLD Business Add-Ins: Definitions (Old)
SE19 Business Add-Ins: Implementations
SE19_OLD Business Add-Ins: Implementations
SE21 Package Builder
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE11 Delete IDocs
WE12 Test Modified Inbound File
WE14 Test Outbound Processing
WE15 Test Outbound Processing from MC
WE16 Test Inbound File
WE17 Test Status File
WE18 Generate Status File
WE19 Test tool
WE20 Partner Profiles
WE21 Port definition
WE23 Verification of IDoc processing
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
RSA1 BW Administrator Workbench
RSA11 Calling up AWB with the IC tree
RSA12 Calling up AWB with the IS tree
RSA13 Calling up AWB with the LG tree
RSA14 Calling up AWB with the IO tree
RSA15 Calling up AWB with the ODS tree
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSDBC DB connect
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining
Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSDL DB Connect - Test Program
RSDMD Master Data Maintenance w.Prev. Sel.
RSDMD_TEST Master Data Test
RSDMPRO Initial Screen: MultiProvider Proc.
RSDMPROD Initial Screen: MultiProvider Proc.
RSDMPROM Initial Screen: MultiProvider Proc.
RSDMWB Customer Behavior Modeling
RSDODS Initial Screen: ODS Object Processng
RSIMPCUR Load Exchange Rates from File
RSINPUT Manual Data Entry
RSIS1 Create InfoSource
RSIS2 Change InfoSource
RSIS3 Display InfoSource
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLGMP Maintain RSLOGSYSMAP
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSRCACHE OLAP: Cache Monitor
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
SE03 Transport Organizer Tools
SE06 Set Up Transport Organizer
SE07 CTS Status Display
SE09 Transport Organizer
SE10 Transport Organizer
SE11 ABAP Dictionary
SE18 Business Add-Ins: Definitions
SE18_OLD Business Add-Ins: Definitions (Old)
SE19 Business Add-Ins: Implementations
SE19_OLD Business Add-Ins: Implementations
SE21 Package Builder
SE24 Class Builder
SE80 Object Navigator
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV*
RSSM Authorizations for Reporting
SM04 User List
SM12 Display and Delete Locks
SM21 Online System Log Analysis
SM37 Overview of job selection
SM50 Work Process Overview
SM51 List of SAP Systems
SM58 Asynchronous RFC Error Log
SM59 RFC Destinations (Display/Maintain)
LISTCUBE List viewer for InfoCubes
LISTSCHEMA Show InfoCube schema
WE02 Display IDoc
WE05 IDoc Lists
WE06 Active IDoc monitoring
WE07 IDoc statistics
WE08 Status File Interface
WE09 Search for IDoc in Database
WE10 Search for IDoc in Archive
WE11 Delete IDocs
WE12 Test Modified Inbound File
WE14 Test Outbound Processing
WE15 Test Outbound Processing from MC
WE16 Test Inbound File
WE17 Test Status File
WE18 Generate Status File
WE19 Test tool
WE20 Partner Profiles
WE21 Port definition
WE23 Verification of IDoc processing
DB02 Tables and Indexes Monitor
DB14 Display DBA Operation Logs
DB16 Display DB Check Results
DB20 Update DB Statistics
You can use Transaction SE93 - most of the BW transaction and also tables start with RS*
Hope this helps you.
Regards,
Yokesh. -
How to find the role of a OBI user
Hi All,
I am using the OBI Web Services to access OBI. I have the user name with me i wanted to know whether the user is a Administrator or a Developer. Is there any way to find the role (Administrator / Developer).
Depending on his role (Administrator / Developer) i have to provide different functionality.
Example:
UserName : IE_ABC
Thanks in Advance!!!!!!!is it helpful?
using narrative & get user role -
I setup the WRT54GS router with the software included and the security -- now I cannot get my one laptop to access it, although it sees it -- it needs the "key" -- what key and where do I find it -- I have printed out all my settings, is it the encription key? or where else would I look?
Also -- I have another new laptop with Vista -- will it set up differently?Yes, you will need to enter the encryption key into your computer to get it to connect.
With WEP, use "key 1", not the password or passphrase.
With WPA or WPA2, use the encryption key (sometimes called "shared key" ).
If you forgot your encryption key, point your browser to 192.168.1.1 , then enter your user name (if any), and password. This will take you to the router's setup pages. Click on the "Wireless" tab. Somewhere in this area you will find the encryption method (WEP, WPA, WPA2, PSK, PSK2, etc). Near this, you will find the key.
Sorry, I don't know Vista, but I would suspect that it would need the same info (SSID, encryption method, and key) in order to connect.
Message Edited by toomanydonuts on 05-25-200712:16 AM -
Finding the finance manager for a user
Hi,
I have the user id of a user along with the O type, obj id and the department the person belongs to.
Now how do I find out the finance manager for that person?
Are there any function modules that can give us the finanace manager for that particular user based on the users o type, obj id and the department the person belongs to?
Thanks and Regards,
MickHello Mick,
If you have clear rule to find the FI manager based on Org. object and structure, evaluation path is a one of solution.
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b2bb453d11d189430000e829fbbd/frameset.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/e4b2bb453d11d189430000e829fbbd/frameset.htm</a>
Regards,
Masa -
To know how to find the Creation date, Assignement date and Activation date
Hi All,
Can you please guide me to find the answer for the below mentioned questions:
Apart from Change log ,
1, Creation date
May I know is there any approach to find the Creation date of a particular Pricing condition type.
2. Assignment date -
How to find the assignment date of a particular condition type to a pricing procedure.
3. Activation Date -
May I know is there any to find out the date of Activation for the Customer hiearchy in T code VDH1N
Presently I'm working on SAP ECC 6.0For the above question I tried T codes and table but I'm not able to find out exactly. Even in Change logs I'm not able to get it.
Can you please guide me where I'm missing.
Thanks in Advance
Thanks & Regards,
PugalHi,
Something like this
select table_name, created from user_objects where object_type = 'TABLE'Regards
Anurag Tibrewal
Oops: I did not see the requirement correctly. If auditing is not the option for you then logminer (if archive is present) else no other option i can think of.
Edited by: Anurag Tibrewal on Oct 6, 2009 8:37 PM -
How to find the transactions used by a user
Hi experts,
How can I find which transactions used by a user. In which SAP table could I look after?Hi ,
You can use transaction code ST03N.
1. Go to tx code - ST03N
2. Under "Workload" you can select your "Instance or Total" so that it expands and shows you Days, Week, Month.
3. If you want to look at the transactions executed for a particular day, lets say, then double click on any day.
4. At the bottom left you get "Analysis Views"
5. Select & expand "User and Settlement Statistics"
6. Double click on "User Profile"
7. On the right side of the window you get a list of all the users
8. Double click on a particular user you want to view the details of.
9. The new screen will display the "Transactions/Reports Utilized by User XXX"
If you wanna track which users executed a particular transacation then follow this:
10. In "Analysis Views" expand "Transaction Profile"
11. Double click on "Standard"
You can view the list of Transactions and Reports.
12. Double click on the Tx Code or Report you wanna check and it will show the Use of it.
This will help you.
Reward if helpful.
Thankyou,
Regards. -
How to find the status of assigned person
Hello,
Is it possible to find the where the process is or who does it currently assign to when the process id is unknown? I heard that a query from the database can do that but not sure how.
Can any one please advise.
Thanks, HanThe following query retrieves all RUNNING tasks, the current assignee and other task details.
select * from tb_task TSK
JOIN tb_assignment ASGN ON TSK.current_assignment_id = ASGN.id
JOIN tb_queue Q ON ASGN.queue_id =Q.id
JOIN EDCPRINCIPALUSERENTITY EDC ON Q.workflow_principal_id=EDC.refprincipalid
WHERE TSK.status = 3
You can filter the records if you know either Process Id or Task Id.
Nith -
Can't find the accessibility menu any more under tools
I am trying to restore the ability of websites to redirect me to other sites.
I think I'd made the mistake of removing this capability by using the Tools/Options/General/Accessibility menu, under "Warn me when websites try to redirect or reload the page"
Now when I go to what I think is the same menu, I only get the Startup and Downloads menus. Your help section shows the "Accessibility" menu I'm looking for but I can't figure out how to get it back so that I can again get directed to other sites.
Thanks.You are missing a step out the option needed is within the '''advanced''' tab.
* Use: ''Help Menu Button {Three bar icon) -> Tools {Cog icon) -> '''|Advanced|''' -> |General|Accessibility [ ] Warn ...''
* See [[Advanced panel - Accessibility, browsing, network, updates, and other advanced settings in Firefox#w_accessibility]]_accessibility -
How to find the Access Key of Standard SAP Function Module
Hi Experts,
I have to change one sap standard function module.
so how can i know the access key for that function module.......
Regards,
DSContact the Basis Consultant in your project.
The access key for standard SAP objects can be obtained from service.sap.com under Keys and Requests.
Note 86161 - Registering developers and objects -
How do i find the email address assigned to my all-in-one wireless printer?
I am trying to set up my so called"all-in-one" (w/o fax?) to wirelessly print from my mobile or other computers connected to my network. I was referred to the eprintcenter.com site. I then read that I needed to set up an account. while doing so, I was asked to give an email address with the password? (you must be joking?) I went back to read that each device has an assigned email address that I could find by going through the device itself wireless menu.... Uhmmmmm?? I have not been able to find it... Nor, any of the other questions?
Hi IDNTLKHPPRODS,
You can see the email address of your printer on the printer itself. If you tell us the model of your printer, I can point you in the right direction to find that.
For creating an account on eprintcenter.com, you use your email address--the one where YOU receive your email, not the printer's email address. Once you have that account and have added your printer to it, you can customize the email address so it is something easier to remember.
I hope this helps!
JamieAtHP
I work on behalf of HP. -
I am trying to set up Pogoplug Series4 as a NAS attached to my Time Machine router. The TM does not appear as a drive in the Finder and I cannot locate it to assign ports to the PP device. Running 10.7 on an iMac. Time Machine and Time Capsule work fine for backup and internet, I just cannot find it.
Thanks, KenAfter I posted the question, I finally figured out that I needed to open the necessary ports to allow the Pogoplug website to communicate with my computer. After navigating to the proper area (in Airport Utility) and authorizing the ports, it seems to work. The Pogoplug device is neither as easy, intuitive or plug-and-play is it claims to be. We will see if it was worth the effort.
Podini's Time Machine FAQ's is a good resource, however. Thanks for sharing.
For anyone who searches for Pogoplug/port forwarding help and ends up here, this is the entry that helped most:
http://must-know-mac.blogspot.com/2008/07/how-to-port-forward-time-capsule.html -
How to dynamically find the dependent jar files on user's PC
I've written an application to deal with JTAPI. Unfortunately the implementations by vendors are different in terms of file names. Ideally I'd like to load jars based upon what's installed, e.g. load jtapi.jar when Cisco is installed, or Escjtapia.jar when it's Avaya. The application uses a small subset of JTAPI so different implementations should not yield any different results.
I edited the manifest file in my jar so that the Class-path has both jar file names for Cisco and Avaya. I didn't enter any path, hoping the CLASSPATH of Windows would be searched, but it is not the case. Also, if other vendors are supported in the future, I might have to add all different file names in the manifest. I don't think the class loader will work in my case, as I may not know the class name at all. I just want to search the system's classpath the find any jar complys to JTAPI and load it.
Anybody can give suggestions on deployment? Thanks!I found it. EXIT_SAPLV01Z_001 does the trick. A package contains many User-Exits, BADIs and enhancement points, so it took me a while to go thru all of them.
Maybe you are looking for
-
Can't figure out how to finish restoring icloud to my new iphone 5s
Just left Apple store, and they started restoring my icloud. Choice between Later/Finish Restoring. I chose "Later" to get to messages. Now I'm home and can't figure out how to finish restoring. Went to settings, then icloud and could not find anyt
-
Crystal Reports 2008 Charting Component
When attempting to create a new report using the bar chart type, I receive the following error from the report wizard: Crystal Reports Charting Component sscsdk80.dll could not be found Please re-run the installation to fix this problem. I have re-ru
-
Sql functions in Pl/Sql region not working
Hi all, I have created a pl/sql region like this This is the example taken from denes kubicek DECLARE v_counter INTEGER := 0; v_line VARCHAR2 (4000); v_rec_in_row INTEGER := 6; BEGIN HTP.prn ('<table>'); HTP
-
Hi Experts, While doing Vl10b against Stock transfer purchase order bellow message occur Unexpected issue of error message (output 8B 213) Message is VR555. Please help me to resolve this issue . Regards Lucas
-
I have been writing a host of Disaster Recovery scripts for Mac OS X Server Backing up Wiki Content etc. I have finally figured out how to send Alerts to my server so I can monitor my scripts in one location and take advantage of Apple's in built A