To Find transaction code for maintenance view J_1BT001WV
Hi Gurus,
I have to find transaction code for maintenance view J_1BT001WV. Plz tell me how can i do it.
regards
Rajesh
Hello Rajesh
There are no specific transactions defined for this view (except for SM30 ).
The IMG activities where the view is used are (check OBJSUB ):
SIMG_ORFB_J_1BT001WV (Assign business place)
J_1BASSBRANCH (Assign CGC branch to plant)
In order to find the view in the IMG call transaction SM30, enter the view and push button Customizing.
The following activites are found on ERP 6.0:
South Korea: Basic Settings for Value-Added Tax Assign Business Place
Business Place (Generic) Assign Business Places to Plants
Official Document Numbering (Indonesia) Assign Business Places to Plants
Nota Fiscal Assign Business Places to Plants
Official Document Numbering (Thailand) Assign Business Places to Plants
Regards
Uwe
Similar Messages
-
How to create transaction code for maintenance view
hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful. -
Transaction code for maintenance view
Hi all
I created a maintenance view and I also generated the table maintenance dailog for the view.Now I am changing the values using the transaction code SM30.But I have to create a transaction code for this maintenance view to access it and update the table instead of using sm30 for this purpose.Please help me.
Thank You.
Regards
Giri.Hi
create transaction using 'se93'
select parameter transaction and give below attributes
Transaction code ZTX1
Transaction text Maintain View ZSDCZTVIEW
Transaction SM30 Screen 0
From module pool
Name of screen field Value
VIEWNAME = ZSDCZTVIEW
UPDATE = X
Thanks -
How to find T-CODES for maintenance view of custom tables?
Hi,
I have a list of custom tables for which maintenance view is generated. Also, many of them might have a T-Codes assigned to them.
I need to know how to find out these T-codes?
Is there some table which maintains these or a function module which can give the t-code name?
Help will be appreciated.
Thanks.
ShreyasHi shreyas,
1. one way is
2. goto se93
3. Press Ctrl F
4. Expand the search criteria (from button on toolbar)
5. In program name enter SAPMSVMA (This program is for sm30)
6. In transaction code enter Z* or Y*
regards,
amit m. -
What r the trns code for maintenance view, help view and projection view
hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari<b>What is the Different Types and Usage of Views
The followings are different types of views:</b>
- <b>Database View (SE11)</b>
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- <b>Help View ( SE54)</b>
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
-<b> Projection View (SE11)</b>
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
<b>- Maintenance View ( SE54 )</b>
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish -
Create T-Code for Maintenance View
Hi all,
I created Maintenance View and i want to create a T-Code for the maintenace view.
I go to SE93 and enter the name and push a create push button. But i dont know the category i must select for the maintenace view.
Would you please help me out and please advise me step-by-step.
Thank you in advance,
Regards,
PeerasitFollow these steps :
1. go to transaction SE93 , give your own transaction code say ztran_tab, for maintaining your ztable.
2. Click on create button and check the radio button Transaction with parameters (PARAMETER TRANSACTION) and click on the tick button.
3. In the next screen enter default values:
transaction : SM30
check the check box skip initial screen
4. Scroll down you will find a table control for default values
Name of the screen field | value
VIEWNAME | your ztable name
SHOW | X
Save your work.
Now as you have created a custom transaction for maintaining your ztable this transaction can be called from any program with CALL transaction 'XXX'. -
How to find transaction code for a BDOC in CRM 2.0
Hi,
We have a situation :
Env.: CRM 2.0
We know the names of the BDOCs.
We want to know the transaction code which are being used when the BDOC is processed and data is saved to CRM DB.
It is urgent.
e.g.
BDOC name: FSA_ILOA_WRITE
Corresponding T Code in CRM: ??????
Thanks in Advance
RitwikYou can find related tables. From that you can have a bit of idea where it is used.
The bdoc you have mentioned seems to be related to mobile sales related tables SMOILOA & SMOKVBEZ10. So, it seems this bdoc will carry some account assignment related data from CRM to Mobile Sales.
Hope this helps.
Regards,
Kaushal -
Transaction code for viewing invoice document and Claims document
Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpihi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel -
Transaction code for viewing Costing Sheet
Hello Sap Gurus,
I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
Regards,
Pawan KumarDear Pawan Kumar,
For checking the costing sheets related to product cost controlling use KZS2.
For Costing sheets related to Internal orders use KALK.
Regards
Mangalraj.S
Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM -
Transaction code for Table Maitainence for table
Hi all,
i have created Table Maintainece for Table and also i need to create transaction code
for table maintainence.
there when i create transaction code with TRANSACTION with PARAMETERS and SKIP FIRST SCREEN.
I can see all the records in the table into table Maintainence.
Is ther is any possibility like i can restrict records on the key fields (like selection screen).
Will anybody let me know how to goahead with this requirement.
Regards,
MadhaviYou can build a small report that call the maintenance view. In the report, convert the SELECT-OPTIONS input to the [DBA_SELLIST|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dba_sellist&adv=false&sortby=cm_rnd_rankvalue] parameter of function module [VIEW_MAINTENANCE_CALL|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=view_maintenance_call&adv=false&sortby=cm_rnd_rankvalue].
If you have "pertinent" key to filter the data, you may define these as sub-key in a mainetance view, those fields will be asked for when entering the maintanance dialog. Or you can build a [view cluster|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=se55&adv=false&sortby=cm_rnd_rankvalue] using these sub-set keys.
Regards -
Transaction code for custom table
Hi there,
I created one custom table. I created Tbale Maintenance Generator for this. I have to create transaction code for this table so that user can directly open this custom table in SM30. Can anybody suggest on this. is there any other way to do this so that user can directly open this custom table in SM30 mode?
Regards,
Zakir.Hi
Check this link for creating a transaction code for a TM
http://www.sap-img.com/abap/create-a-table-maintance-program-for-a-z-table.htm
Please go throught below link ..... it was given with screen shots of the T.code Creating for the table after the maintaince view had been created ......
http://www.sapdevelopment.co.uk/tips/tips_tabmaint_tcode.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards
Anji -
Need all transaction codes for idocs
need all transaction codes for idocs
Hi,
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
BAPI tcode --- BAPI.
Also:
IDOC:
IDOC ADMINISTRATION
WE09 / WE02 IDoc lists according to content. View IDocs via specific IDoc number or business application detail contained within the contents of a segment.
WE05 View IDocs
WE60 IDoc type documentation tool
WE20 Partner profile configuration. Add partner detail together with inbound and outbound relationships. We also incorporate message control on the outbound IDocs. Utilize the organizational units to trap functional errors for further processing.
BD87 Reprocess IDocs in error or waiting for action. (Both inbound and outbound in 4.6. Use BD88 in prior versions)
1.4 IDOC DEVELOPMENT
BD55 Conversion rule user exit. Link conversion rule user exit to the different system \ partner combinations.
WE19 EDI test tool. Use to test inbound Function module changes.
WE31 Segment create
WE30 Create IDoc extension type
WE82 Link Release detail to Extension IDoc Type
WE57 Assign function module to logical message and IDoc type
BAPI: BAPI, SWO1.
Transaction codes Related for IDOC Configurations
WEDI: Area Menu for IDOCs
WE02: Display IDoc
WE19: ALE Test tool
WE30: Development of IDOC Type
WE31: Development of IDOC Segment
WE41: Process Codes, Outbound
WE42: Process Codes, Inbound
WE47: Status Maintenance
WE81: Logical Message Types
WE57: Assignment Messages for Appl. Objs
SM59: RFC Destinations (Display/Maintain)
SALE: Display ALE Customizing
BD54: Maintaining Logical Systems
BD67: Maintain methods (inbound)
BD64: Maintenance of Distribution Model
BD87: Status Monitor for ALE Messages
Reward points if found helpful...
Cheers,
Chandra Sekhar. -
How to find function code for buttons on toolbar in oops alv
Hi experts,
I want to remove some buttons from toolbar in oops alv, i know the procedure like get function code and pass the value in a table and pass that table to IT_TOOLBAR_EXCLUDING of
method set_table_for_first_display but I WANT TO KNOW HOW TO FIND FUNCTION CODE FOR BUTTONS ON TOOLBAR IN OOPS ALVHi Prakash,
-->First you have to set the pf status in your alv program by,
{FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'FIRST'.
ENDFORM. "PF_STATUS}
-->Pass this Subroutine name in the Function module, Reuse_alv_grid_display's parameters i.e,
i_callback_pf_status_set = 'PF_STATUS'}
*-->Then doble click on that pf status,
From the menu bar, select Extras->Adjust Template->List Viewer,
This will give you the existing statndard gui status of the program*
->Then catch that function codes in the User command Parameter of the Function module Reuse.. i.e,
i_callback_user_command = 'COMM'
And make a subroutine of the name 'COMM'i.e,
FORM comm USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA: okcode TYPE sy-ucomm.
okcode = ucomm.
CASE okcode.
WHEN 'REF'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'MANSI'
txt1 = 'CREATED BY'
txt2 = SY-UNAME
TXT3 = ' '
TXT4 = ' '
endcase.
Hope it helps you
Regrds
Mansi -
How to find Transaction code from Report/program name ?
Dear all,
How to find Transaction code if i know Report/program name ?Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi -
How to create Transaction code for Table Maintanance generator.?
Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,Hi,
Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
VIEWNAME : XXX9tABLE NAME)
UPDATE : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath
Maybe you are looking for
-
"safari quit unexpectedly" on opening everytime (lion)
I have been having problems with safari. It will not open and continues to give me the message "safari quit unexpectedly" I have tried various things including reinstalls. When I reinstall it the program will work for a day or two then the same mee
-
is there a way to have the birthdays i enter into the address book cards show up on those dates on the calendar? thanks for the assistance.
-
Reader 11.0.10 and acrobat X 10.1.13 font problem.
I think latest version of acrobat pro X 10.1.13 and adobe reader 11.0.10 have problem with embedded fonts. If want to open a pdf with embedded font and i receive this message (sorry, translated by me from french) "Impossible to extract the embedded f
-
Problem updating to 3.10
Anyone has similar problem? I was notified of the update by then, it gave me a message like "unable to locate files" then, it went away and never notify me again. I manually attempted to update, but no results. The version still say 3.01 (374). Perry
-
TS1398 why is my ipad trying to connect to 3g network?
ipad picking up 3g network instead of wi-fi