To find when a transaction has been last-used

Hello everybody,
Is it possible to find out when BD10 has been last executed for a given Material.
(or)
Does there exist any table / function module / transaction where we can find, when a particular transaction had been last used(user, date & time)?
Awaiting your reply.
Thanks in advance.

Try using the Function Module
"SAPWL_WORKLOAD_GET_STATISTIC" for getting the list of last accessed program or transaction code. You need to loop through the memory_stattistic internal table and get the list of programs and transaction codes.

Similar Messages

Is it possible to know the date & time, when a form has been last accessed?

Hi
I am using forms 6i. Is it possible to know when a form has been last accessed by any user?
Regards

Only if you implement such a feature. (Maybe writing to a table in the PRE-FORM-trigger in an autonomous transaction)

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Find out when a program has been run

Hi,
To find out when a program has been run, I've developed a z program that uses FM SAPWL_STATREC_READ_FILE.
However sometimes, the FM can't read the log file, and also I've known that a program was executed but it isn't on the tables return by the SAPWL_STATREC_READ_FILE.
Can you help?
Regards,
Maria João Rocha

As I understand, the file is deleted (and recreated) if it reaches the size specified in the parameter settings
Following is an excerpt from help (do a search on 'statfile' in the help documentation..)
"Options for reorganizing statistical data (for all servers)
Delete seq. statfile after cumulation if size > (default: 100Mb).
This parameter specifies from what file size the system should delete the statistics file. The statistics file is required for individual statistics and is therefore not deleted until the file size has passed a specified maximum file size. Of course, the file is only deleted if it was completely processed by RSSTAT80 or RSSTAT83 ..
Max. no. of records cumulated per call (default: 20.000).
This is the maximum number of entries in the statistics file that can be processed by RSSTAT80 or RSSTAT83 in one session. This parameter is used to restrict the runtime of the collector.
Options for reorg of application statistic data (valid for all servers)
Delete appl. statfile after cumulation if size > (default: 30Mb).
This parameter specifies from what size the system should delete the application statistics file. Of course, the file is only deleted if it was completely processed by RSSTAT88 or RSSTAT89 .
Max. number of records cumulated per call (default: 20.000).
This is the maximum number of entries in the application statistics file that can be processed by RSSTAT80 or RSSTAT83 in one session. This parameter is used to restrict the runtime of the collector."

How to find out when a file has been written to ?

Hello All,
In an application I want to open up a file (while letting another process write to it). As stuff is getting written to the file I want to be able to process that data (getting close to real-time as possible). How would one go about finding out when new data has been written to the file ? Does Java provide some alerting mechanism for file changes ? Thanks in advance...
-Pete

Maybe you could keep tabs of the file size. If the file size grows (which it will do each time the writing process flushes that files output buffer), then the file was written to.
What I'd like to know is if there is some way to monitor the entire drive for changes and respond to stuff like that. I know that the Win32 API provides services that monitor the file system for changes, but I don't know if other OS's do... or if Java provides an interface to those features.

How to find the date when the users has been created in Hyperion Essbase

Please let me know, if there is any option or way to find the date when the users has been created in Hyperion.
Essbase - 9.3.1.0.0
Sun Solaris SPARC (32-bit) - 5.8
If not in Hyperion, could you please let me know if it gets stored in the repository. If yes, please let me know the table name in Oracle.

I don't know of a way of getting this information from Shared Services via the standard web UI. However you can see when a native user was created in openLDAP. If your users are all native then you can use an ldap browser to view the CreateTimestamp.
Port: 58089
User DN:CN=911,ou=People,dc=css,dc=hyperion,dc=com
Password: Your shared services admin user password
You should see each new native user under the ou=People and each CN will have a create timestamp.
I can't help if all you users are external or your using the old Essbase native security.
Gee

HT3255 How can I log in to find my MacBook Air serial number when my computer has been stolen?

How can I log in to find my MacBook Air serial number when my computer has been stolen?

Check your support profile if you may have registered it there.
Check your email - Apple typically offers to email your receipts to you.
supportprofile.apple.com
Message was edited by: ssschmidt

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8(MASTER REPL

제품 : ORACLE SERVER
작성날짜 : 2004-08-16
HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8
(MASTER REPLICATION)
================================================================
본 자료에서는 어느 시점에서, Deferred transaction이 PUSH 되었는지를
확인하는 방법을 제시한다(In symmetric replication).
단, Advanced Replication Feature는 8~10g Standard Edition에서는
지원하지 않는다.
개 념
=====
V7.x 에서는 deferred transaction 이 PUSH 됨과 동시에 삭제 되었으나, V8.x
부터는 일정시간(interval) 이후에 PURGE 되는 절차를 따른다.
임의의 transaction은 아래와 같은 조건을 만족할때 PUSH 된 것으로 확인될
수 있다.
즉, SCN-based integer 값을 기초로 transaction ordering 을 유지한다는
기본개념을 적용한 것이다.
- system.DEF$_DESTINATION.last_delivered > system.DEF$_AQCALL.cscn
* DEF$_DESTINATION.last_delivered : the last transaction applied
at the destination
예 제
=====
이 예제는 REP1.ORACLE.COM site 에서 REP2.ORACLE.COM site 로 transaction 이 PUSH 되는 결과를 보여준다.
SQL> insert into scott.dept values (80,'MARKETING','ORLANDO');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from deftran;
DEFERRED_TRAN_ID DELIVERY_ORDER
4.49.495 479001
3.0.494 478972
OR
SQL> select enq_tid, cscn from system.def$_aqcall;
ENQ_TID CSCN
4.49.495 479001
3.0.494 478972
DEF$_DESTINATION table을 통하여 마지막으로 propagation 된 정보를 확인할
수 있다
SQL> select dblink, last_delivered from system.def$_destination;
DBLINK LAST_DELIVERED
REP2.ORACLE.COM 478992
REP1.ORACLE.COM 478878
이 시점에서 DEFERRED_TRAN_ID or ENQ_TID 4.49.495 transaction 이 PUSH 되지
않았음을 알 수 있는것이다. 이는 DELIVERY_ORDER or CSCN 479001 transaction이 REP2.ORACLE.COM 에 대해 마지막으로 전이된 478992 보다 큰 값을 가지고 있기
때문이다.
즉, DEF$_AQCALL.CSCN > DEF$_DESTINATION.LAST_DELIVERED 을 만족한다면 해당 transaction 은 아직 PUSH 되지 않았음을 뜻한다.
그럼 PUSH scheduling 을 적용 함으로써, 이러한 값들이 어떻게 변하는지 알아
보도록 하자.
SQL> exec dbms_defer_sys.schedule_push('rep2.oracle.com',
'sysdate+1/(60*24)', sysdate+1/(60*24));
PL/SQL procedure successfully completed.
SQL> select * from deftran;
DEFERRED_TRAN_ID DELIVERY_ORDER
4.49.495 479001
3.0.494 478972
SQL> select enq_tid, cscn from system.def$_aqcall;
ENQ_TID CSCN
4.49.495 479001
3.0.494 478972
위 값들은 전혀 변하지 않았으나, 이는 Deferred transaction mechanism 관점에서
정상적인 정보를 나타내고 있다(아직 PURGE 되지 않았기 때문)
SQL> Select dblink, last_delivered from system.def$_destination;
DBLINK LAST_DELIVERED
REP2.ORACLE.COM 479017
REP1.ORACLE.COM 478878
그러나, DEF$_DESTINATION table 의 LAST_DELIVERED column 값을 확인해 보면, REP2.ORACLE.COM site 에 대한 값이 증가했음을 볼 수 있다.
그런 이유로 DEFTRAN 에 기록되었던 transaction 중 DEF$_AQCALL.CSCN < DEF$_DESTINATION.LAST_DELIVERED 을 만족하는 모든 transaction 은 PUSH
되었음을 확인할 수 있는것이다.
특정 SITE 에 대해 PUSH 된 transaction 수를 구하는 방법
====================================================
SQL> connect system/manager
Connected.
SQL> select count(*)
from def$_aqcall
where cscn < (select last_delivered
from def$_destination
where dblink ='REP2.ORACLE.COM');
COUNT(*)
2
Reference
=========
Multimaster replication
How to rectify the replication environment
Parallel propagation

제품 : ORACLE SERVER
작성날짜 : 2004-08-16
HOW TO VERIFY A DEFERRED TRANSACTION HAS BEEN PUSHED IN ORACLE8
(MASTER REPLICATION)
================================================================
본 자료에서는 어느 시점에서, Deferred transaction이 PUSH 되었는지를
확인하는 방법을 제시한다(In symmetric replication).
단, Advanced Replication Feature는 8~10g Standard Edition에서는
지원하지 않는다.
개 념
=====
V7.x 에서는 deferred transaction 이 PUSH 됨과 동시에 삭제 되었으나, V8.x
부터는 일정시간(interval) 이후에 PURGE 되는 절차를 따른다.
임의의 transaction은 아래와 같은 조건을 만족할때 PUSH 된 것으로 확인될
수 있다.
즉, SCN-based integer 값을 기초로 transaction ordering 을 유지한다는
기본개념을 적용한 것이다.
- system.DEF$_DESTINATION.last_delivered > system.DEF$_AQCALL.cscn
* DEF$_DESTINATION.last_delivered : the last transaction applied
at the destination
예 제
=====
이 예제는 REP1.ORACLE.COM site 에서 REP2.ORACLE.COM site 로 transaction 이 PUSH 되는 결과를 보여준다.
SQL> insert into scott.dept values (80,'MARKETING','ORLANDO');
1 row created.
SQL> commit;
Commit complete.
SQL> select * from deftran;
DEFERRED_TRAN_ID DELIVERY_ORDER
4.49.495 479001
3.0.494 478972
OR
SQL> select enq_tid, cscn from system.def$_aqcall;
ENQ_TID CSCN
4.49.495 479001
3.0.494 478972
DEF$_DESTINATION table을 통하여 마지막으로 propagation 된 정보를 확인할
수 있다
SQL> select dblink, last_delivered from system.def$_destination;
DBLINK LAST_DELIVERED
REP2.ORACLE.COM 478992
REP1.ORACLE.COM 478878
이 시점에서 DEFERRED_TRAN_ID or ENQ_TID 4.49.495 transaction 이 PUSH 되지
않았음을 알 수 있는것이다. 이는 DELIVERY_ORDER or CSCN 479001 transaction이 REP2.ORACLE.COM 에 대해 마지막으로 전이된 478992 보다 큰 값을 가지고 있기
때문이다.
즉, DEF$_AQCALL.CSCN > DEF$_DESTINATION.LAST_DELIVERED 을 만족한다면 해당 transaction 은 아직 PUSH 되지 않았음을 뜻한다.
그럼 PUSH scheduling 을 적용 함으로써, 이러한 값들이 어떻게 변하는지 알아
보도록 하자.
SQL> exec dbms_defer_sys.schedule_push('rep2.oracle.com',
'sysdate+1/(60*24)', sysdate+1/(60*24));
PL/SQL procedure successfully completed.
SQL> select * from deftran;
DEFERRED_TRAN_ID DELIVERY_ORDER
4.49.495 479001
3.0.494 478972
SQL> select enq_tid, cscn from system.def$_aqcall;
ENQ_TID CSCN
4.49.495 479001
3.0.494 478972
위 값들은 전혀 변하지 않았으나, 이는 Deferred transaction mechanism 관점에서
정상적인 정보를 나타내고 있다(아직 PURGE 되지 않았기 때문)
SQL> Select dblink, last_delivered from system.def$_destination;
DBLINK LAST_DELIVERED
REP2.ORACLE.COM 479017
REP1.ORACLE.COM 478878
그러나, DEF$_DESTINATION table 의 LAST_DELIVERED column 값을 확인해 보면, REP2.ORACLE.COM site 에 대한 값이 증가했음을 볼 수 있다.
그런 이유로 DEFTRAN 에 기록되었던 transaction 중 DEF$_AQCALL.CSCN < DEF$_DESTINATION.LAST_DELIVERED 을 만족하는 모든 transaction 은 PUSH
되었음을 확인할 수 있는것이다.
특정 SITE 에 대해 PUSH 된 transaction 수를 구하는 방법
====================================================
SQL> connect system/manager
Connected.
SQL> select count(*)
from def$_aqcall
where cscn < (select last_delivered
from def$_destination
where dblink ='REP2.ORACLE.COM');
COUNT(*)
2
Reference
=========
Multimaster replication
How to rectify the replication environment
Parallel propagation

JComboBox Event? How do I know when a JComboBox has been clicked?

What event is fired when a JComboBox is pressed?
I can tell when an item has been selected but I want
to know when the combobox was clicked originally.

Two (untested) ways of doing this:
1. Subclass JCombobox and fire an event when the box is opened. To find out when its opened, you'll probably have to look at the source for JCombobox and override the method.
2. use the model as a clue. Chances are the underlying combo box model will have its getValueAt() method called when the user opens the drop down box. Cant be sure that thats the only time itll happen tho,,
DS

I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niethe

I entered my debit card for a app latter when I went to update all it asked password as usual then said sign in required took me to page sayin my card has been declined use alternate I don't have alternate but now it won't let me download free apps niether

Do you have enough funds in your bank account?
otherwise iTunes sometimes black lists card if there are too many fradulent purchases
Reason why they might black list a card is possibly you call in for alot of fradulent purchases
One more reason can be because iTunes does actually limit the amount you can change payment methods
Call AppleCare Phone support and have your call directed to iTunes Store
1-800-275-2273

The hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

the hold button on my ipod touch 3rd generation does not work and ipod randomly flashes on and off, asking if i want to restart it when no button has been pushed, any suggestions?

it might be a malfunction in your device. you might ave to send it to repairation
1.ave you try resetting it or restoring it?
2. did your hold boutons whas working beffor?

How can I check how many times or when an app has been re-downloaded on my iphone

How can I check how many times or when an app has been re-downloaded on my iphone. I know how to check purchases but I am looking for how to check when an app had been re-downloaded on my device whether it's through my device or Apple ID

You mention "lack of control" several times. The control is there - you control the Apple ID and password that owns the app. No other Apple ID can use the app. You have not shared your Apple ID or password with anyone, so you and only you own the app.
Therefore, the number of times the app is downloaded or re-downloaded is completely irrelevant. You might, for example, decide to purchase a new iPhone or iPad and download the app there. Or the app developer may issue a new version which you download. None of this matters regarding your "control" of the app. All that matters is that you own it and nobody else can use it.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

Were you not plugged in via USB to begin with?
I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/HT1379

To find when a transaction has been last-used

Similar Messages

Maybe you are looking for