To generate email alert when archive logs fill

Hi. I was away yesterday and the archive logs were filling up and were at 92% when I got in this morning.
I need to have an email generated once the /archlogs directory fills past 90%.
The total size of that directory is 8064M. So once it hits around 7257M I would like an email fired to me and my boss.
Oracle 9.2.0.5.0
UNIX AIX 5.2

In addition to Sybrand's reply, you might want to consider some other factors.
First, when setting up email notifications, you need to adjust your expectations to account for the possible latency in email delivery. I have seen 'critical' emails take several hours to get through the system. This is not a function of Oracle, but of the email servers.
Second, if archivelog destination filling up is an ongoing problem, I'd be looking at how my archivelogs are backed up and deleted - how I do my housekeeping on that destination. You should have more important things to do than constant monitoring and responding to 'destination full' conditions.

Similar Messages

  • SCOM 2012 R2 - Generate an alert when a specific event will not come in specific time range

    Hello SCOM people,
    I need to figure out what kind of monitor shall I choose for my monitoring of a specific event. I need to generate an alert when no specific event was generated by server.
    Our company uses FIM 2010 with scheduled tasks, after each completed task is generated an event to application log. When sync is stuck or something is wrong no event will come to application log and I need to be warned. Tasks run each 30minutes and there
    should not be an hour break between the previously created event.
    I hope it makes sense :)
    Thank you
    Liibas

    Hi Liibas,
    That sounds like a good scenario for using Orchestrator and the SCOM Integration Pack, since you can have time-triggers, etc. to check for Alerts and then trigger a Runbook to email someone if the Alert does/does not appear. 
    Please remember to click “Mark as Answer” on the post that helps you.
    AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud)
    2015 Microsoft MVP in System Center Cloud and Datacenter Management
    LinkedIn: http://ca.linkedin.com/in/adinermie
    Website: http://micloud.azurewebsites.net

  • Email alert when calc scripts are done

    Hi - I have Essbase 6.5 and wanted to know how do I setup an email alert when one of my calcs are done running?
    Thanks

    Hi CLAU,
    we use second method suggested by Glenn.
    instead of BLAT we use SendMail
    here is the sample batch file which call a maxl script (which can be your calc script) and then emails the log.
    hope this helps.
    -Dornakal
    www.dornakal.blogspot.com
    Batch File to call the MaxL Script and send email about status of the
    Rem ******************************************************************************
    Rem Object Type: Batch File
    Rem Object Name: BatchFileName.bat
    Rem Script Date: 01-27-2009
    Rem Created by: Dornakal
    Rem Purpose: This script loads the following data into Cube
    Rem Changed By:
    Rem Change Date:
    Rem Description:
    Rem ******************************************************************************
    Rem This starts the log file
    echo "Start of log" > E:\Logs\Dataload.log
    Rem This calls MaxL script to load data
    essmsh E:\Scripts\MaxL \DataLoad.mxl >> E:\Logs\Dataload.log
    Rem Send mail about the status of the job
    sendmail -b E:\Logs\Dataload.log -s "Subject of the mail (data load status)." -f Sendersemail -r Recievers email -r Receiver’s email -X HQSMTP.yourcompany.net

  • Prime Infrastructure 2.0 - Email alert when device is unreachable

    Is there a way for PI to send email alerts when a device becomes unreachable? I know there are alerts when an interface goes down, but I can't find how to get prime to alert me ONLY when a device becomes unreachable.
    Does anyone know how to do this? I can't believe such a simple feature would be so difficult to configure...

    PI also generates an event when it finds unreachable device. An event is an occurrence or detection of some condition in or around the network. An event is a distinct incident that occurs at a specific point in time. Examples of events include:
    Port status change
    Device reset
    Device becomes unreachable by the management station
    You can view the list of events using the Event Browser.
    Choose Operate > Alarms & Events , then click Events to access the Events Browser page.
    Prime Infrastructure discovers events by automatically polling devices and discovering changes; for example, device unreachable.
    For more details on Events, please check here :
    http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/alarms.html#pgfId-1054357
    -Thanks
    Vinod
    **Rating Encourages contributors, and its really free. **

  • How do i recieve email alerts when using find my iphone

    how can i recieve email alerts when find my iphone is used

    You don't, this is a new security measure.
    you can send apple a feed back here http://www.apple.com/feedback/

  • How can I stop Firefox autofilling my email address when I log onto hotmail?

    How do I stop Firefox autofilling my email address when I log onto hotmail?

    Thanks Lawrence. I've spent over 3 hours on the phone/chatting to online support and none of it seemed to help as it all revolved around resetting emails etc but can't do any of it without my access to my old email. Now my phone won't take cloud because they advised to set up new apple ID and use that, but can't sign out of old one completely. Also doesn't help because my phone and laptop are set up on the old one. Thanks for the help.

  • No email alerts when post are replied to

    I don't get an email alert when I get a reply to a post. Please can anyone tell me why and how to change this.

    Other uses have reported the same problem. This occasionally happens and there is nothing you can do. It has been reported to Apple.

  • I have paid for the annual service and and unable to use it? I have proof of payment and a welcoming email, however when I log in it say's I have the "free" option???

    I have paid for the annual service and and unable to use it? I have proof of payment and a welcoming email, however when I log in it say's I have the "free" option???

    Thank you for purchasing a subscription for Adobe PDF Pack.
    Unlimited online conversions to Adobe PDF.
    The ability to combine multiple source files into a single merged PDF.
    Unlimited conversions from PDF files to editable Word (DOCX) or Excel (XLSX) documents.
    Anytime, anywhere access to your converted PDF files through a web browser.
    The link in the email takes me to: https://cloud.acrobat.com/?trackingid=ISNAI

  • WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

    Hi folks -
    I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
    My wife has a VPN client for her work, on her laptop.  It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
    My WRVS4400N is running 1.1.03 firmware, latest on the site.  I have all VPN pass-throughs enabled.  VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
    The problem is, that I have logging turned on with email alerts.  When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information.  It's almost like there is a bug in the router firmware that is parsing information incorrectly. 
    Log levels are set to 0,1,2,3.  Email alerts enabled.  DoS threshold is 50, Log Queue is 100, Log Time is 60.  SMTP information for my mail server populated of course, and Local Log enabled.
    Below is a sample of the email body that gets sent.  My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
    Here's some body content:
    Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
    Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
    Does anyone have any ideas?  This seems like a code bug to me, but how do I go about reporting to Linksys?
    Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
    Any help would be appreciated!
    Thanks,
    Jesse T.

    hay,
    Nobody can test this?
    nobody has a 5520?

  • Archive log filling up a gig per minute

    Hi there,
    No one is on the database amd every day now the archive log is filling up over a gig per minute so when I get in work in the morning the backup didn't run and the archive directory is full and the database is not available.
    This has been happening for the last 6 days and I can't figure it out. I have to keep clearing out archive files to get the directory percentage down so a few users can run some reports.
    This database is not growing at all. There is no data being added to it, its a histrical database for report running only.
    Here is the file system, as you can see, big drive so I am at a loss.
    Filesystem Size Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    3.1G 829M 2.2G 28% /
    /dev/mapper/VolGroup00-LogVol_USR
    4.0G 3.0G 813M 79% /usr
    /dev/mapper/VolGroup00-LogVol_d01
    160G 116G 36G 77% /d01
    /dev/mapper/VolGroupBackup-LogVol_Backup
    213G 195G 7.6G 97% /backup
    /dev/sda1 99M 11M 84M 11% /boot
    none 1.5G 0 1.5G 0% /dev/shm

    user13286861 wrote:
    Hi there,
    No one is on the database amd every day now the archive log is filling up over a gig per minute so when I get in work in the morning the backup didn't run and the archive directory is full and the database is not available.
    This has been happening for the last 6 days and I can't figure it out. I have to keep clearing out archive files to get the directory percentage down so a few users can run some reports.
    This database is not growing at all. There is no data being added to it, its a histrical database for report running only.
    Here is the file system, as you can see, big drive so I am at a loss.
    Filesystem Size Used Avail Use% Mounted on
    /dev/mapper/VolGroup00-LogVol00
    3.1G 829M 2.2G 28% /
    /dev/mapper/VolGroup00-LogVol_USR
    4.0G 3.0G 813M 79% /usr
    /dev/mapper/VolGroup00-LogVol_d01
    160G 116G 36G 77% /d01
    /dev/mapper/VolGroupBackup-LogVol_Backup
    213G 195G 7.6G 97% /backup
    /dev/sda1 99M 11M 84M 11% /boot
    none 1.5G 0 1.5G 0% /dev/shmRun off a statspack report and post the "Instance Activity", "Top 5" and "Load Profile" sections here. Don't forget to use the "cost" tags to get the output in fixed font (see end of post).
    Question 1 - what did you do 6 days ago ?
    Question 2 - what method are you using for backups.
    Guess 1 - you have a load of tablespaces in backup mode, and you're doing a lot of delayed block cleanout.
    Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    http://www.jlcomp.demon.co.uk
    To post code, statspack/AWR report, execution plans or trace files, start and end the section with the tag {noformat}{noformat} (lowercase, curly brackets, no spaces) so that the text appears in fixed format.
    There is a +"Preview"+ tab at the top of the text entry panel. Use this to check what your message will look like before you post the message. If it looks a complete mess you're unlikely to get a response. (Click on the +"Plain text"+ tab if you want to edit the text to tidy it up.)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Keep getting a request for password "for the CalDAV account for my email account when I log in my iPhone password. ????

    I keep getting a request "for the CalDAv account" when I log in using my iPhone password on my iPhone.  Just started happening.   ????

    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
    The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
    Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
    Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
    Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

  • SharePoint 2010 Workflow: Email alert when item is due to expire

    Hi Guys, 
    I have a library which contains a number of customer records. In this library I have a custom date column called End Date which is used to hold a date when the record is due to expire. I would like to create a solution which would send an email alert to someone
    when the record is 30days away from expiring a sort of warning, and another email once the expiry date had been lapsed and the record had expired. Can you please advise how best to create this solution, I should imagine that this would be easily achieved in
    designer however, I've really not got much experience with using designer 2010.
    If someone could help me out with what code to use, or some useful how to's it would be much appreciated.
    Many thanks 

    Hello,
    Create designer workflow to send reminder email before 30 days. Please look at below link for your ref:
    http://mysharepointchronicles.wordpress.com/2012/11/05/sharepoint-list-with-workflow-email-reminder-set-to-send-30-days-from-created-date/
    http://social.technet.microsoft.com/forums/en-US/sharepointcustomizationprevious/thread/9c728338-b0fe-45a0-9377-a774e551d529
    Hope it could help
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer
    Please feel free to unmark answer if does not resolves your problem.

  • Cisco Prime Infrastructure 2.1 not send email alert when link down

    Hello everyone
     I use PI to monitor 1 switch and 1 firewall . When a link up/down on switch , PI immediately sends an email alert .
    But when a link up/down on FW , PI not send any email alert . PI knows link up/down on a FW is a critical alarm ( it's show up on "Alarm Browser") , but not send email.
    I enable all SNMP trap on FW , i tested that event on SolarWinds and it immediately sends an email alert . So there is no problem about FW config

    Causes of Errdisable
    This feature was first implemented to handle special collision situations in which the switch detected excessive or late collisions on a port. Excessive collisions occur when a frame is dropped because the switch encounters 16 collisions in a row. Late collisions occur after every device on the wire should have recognized that the wire was in use. Possible causes of these types of errors include:
    A cable that is out of specification (either too long, the wrong type, or defective)
    A bad network interface card (NIC) card (with physical problems or driver problems)
    A port duplex misconfiguration
    A port duplex misconfiguration is a common cause of the errors because of failures to negotiate the speed and duplex properly between two directly connected devices (for example, a NIC that connects to a switch). Only half-duplex connections should ever have collisions in a LAN. Because of the carrier sense multiple access (CSMA) nature of Ethernet, collisions are normal for half duplex, as long as the collisions do not exceed a small percentage of traffic.
    There are various reasons for the interface to go into errdisable. The reason can be:
    Duplex mismatch
    Port channel misconfiguration
    BPDU guard violation
    UniDirectional Link Detection (UDLD) condition
    Late-collision detection
    Link-flap detection
    Security violation
    Port Aggregation Protocol (PAgP) flap
    Layer 2 Tunneling Protocol (L2TP) guard
    DHCP snooping rate-limit
    Incorrect GBIC / Small Form-Factor Pluggable (SFP) module or cable
    Address Resolution Protocol (ARP) inspection
    Inline power
    Note: Error-disable detection is enabled for all of these reasons by default. In order to disable error-disable detection, use the no errdisable detect cause command. The show errdisable detect command displays the error-disable detection status.

  • Email alert when failed attempt to login

    Hello
    I was wondering if it's possible to set an email alert if someone tries to login to my account with the password?
    Thanks

    Hi, PatQP, and welcome to the Community,
    Great idea!  I do not know of any such facility available to us. 
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Send an email alert when an item is added to web part from list.

    Hello, I'm a SharePoint 2010 newbie and have been tasked with a small project and would greatly appreciate any help. We have a web part on our home page that is populated from a query source list from one of our department's sites.  We would like
    for an alert email to be sent out when it hits the web part.  I was able to use the Alert Me feature on the list to send out an email however the alert had links to the source site page and we only want to have a link to the new item. 

    Hello,
    Do you have SP designer installed in your machine? If yes then create simple list workflow using designer then you can customize the email body as per your business need.
    Here is link to add current item link in email body:
    http://www.enjoysharepoint.com/Articles/Details/sharepoint-designer-2010-workflow-email-link-to-edit-item-or-20796.aspx
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Maybe you are looking for

  • Button opens link in a new window

    Hello everyone, This is a rather simple question for all gurus out there, but it seems a bit hard to find on documentation. How can you open a link in a new window with a button in a flash form? I want a button on my form to pop a new window with a s

  • OAS 4.0.8.1 on Compaq Tru64 UNIX 4.0F (Digital Unix 4.0F) : Help !!!

    My installation of OAS 4.0.8.1 on Digital Unix 4.0F is failing when it comes to try to relink something called ntcontab.o , an apparently missing header file : cc: Severe: /usr/include/sys/types.h, line 77: Cannot find file <standards.h> specified in

  • Web Dynpro iviews integration with web page composer

    Hi, Can web dynpro iviews be integrated into web page composer? I was trying to integrate one ESS web dynpro iview into wpc but the system is throwing an error: We are on EP7.01 SP3 (Enhancement Pack1). Please advice if the integration is possible in

  • Went to use Facetime and my MB Pro said there was no camera available.

    Hi, I tried to use Face Time and my MBPro said there was no camera available.  Same thing happened when I tried to use Photo Booth.  Any ideas?  Thanks.

  • Bad performance: Xpath View causes database server almost 100% cpu

    Hi there, Since I am rather inexperienced in using the Oracle XML DB I wonder If I am doing wrong with the following: I created a table with a xmltype column in it: CREATE TABLE LPD_LOAD_XML FILENAME VARCHAR2(50 BYTE) NOT NULL, XML_CONTENT SYS.XMLTYP