To get a bex report on month and cust period

hi every body,
can any one pls give me advise i have to club up both cust period(fyscal cal) and cal month in a single bex report.
what will b the best option using a ods?

Whether you use ods or cube it does not matter. But remember, fiscal period and calmonth are NOT one and the same. There can be a month or period, where they can be different. So, in your update rules, you need to derive month from period and store both calmont and fis period in the ods or cube. Try to use this FM FISCPER_FROM_CALMONTH_CALC to derive period from month.
Ravi Thothadri

Similar Messages

  • BEX : report with real and budget on the same line

    Hi everyone,
    I need to create a Bex report showing on the same line :
    - budget WBS element stored in a DSO  (DataSource 0CO_OM_WBS_1)
    - used amount stored in another DSO   (DataSource 0FI_GL_4)
    Data are stored in 2 different DSOs.
    If a create a multiprovided with both DSOs I will get 2 lines in my report as axes are different,no ?
    Thanks for any idea.
    Aussie

    Hi,
    You can make use of infoset.You can also do a lookup from one dso to another ant transport the values in one dso.So by doin this alll your values will be stored in one place and then you can show the values in one line in report.
    Please also give me the idea of keyfields of both dso's.
    You can also use constant selection in report if you are using multiprovider through this to some extenet you can solve the problem of values in coming in two lines.
    Also check out the below PDF for Displaying Result Row in One Line While Reporting On Multiproviderer.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
    Hope it helps.
    Regards,
    AL
    Edited by: AL1112 on Aug 3, 2011 11:55 AM

  • TO GET WEEKS for a given MONTH AND YEAR

    Is there any FM to get the no of weeks for a given month, say 01 2005.
    Can i get the week numbers say 1 2 3 4 5 for the given month and year.
    Please let me know.
    Happy Holidays.
    Regards,
    Manohar E

    Hi Manohar,
       Use FM DATE_GET_WEEK twice; first time pass first day of the month and again pass the last day of the month as a parameter. So u will be having week number(yyyyxx) for the first week of the month and week number for the last week of the month. From these two, in between week numbers u can easily fetch. I hope this will help u out.
    Regards,
    Kavya Shah

  • How to get currect date by using month and year

    hai,
    By using month like 'Jul' and year like 2007 i want to get full date like 01/06/2007(format).Please give me query for this?My fields for month and year are respectively vr_mnth(varchar) and in_year(number)

    i used to_date function but it accepts only one string .if i give like this
    to_date(vr_mnth,in_year,'dd/mm/yy') it will gives me syntax error.
    If i give like this vr_mtnh='Jan'
    to_date(vr_mtnh,'Mon') it will give output
    01/01/2008 it shows me current year
    if i choose from table wich is strored with month-'Jul' and year=2006 it shows me
    01/07/2008 only .It doesn't shows me that 2006 year
    If i give in_year in to_date it gives me that currect year.
    Ex:to_date(in_year,'YY')..............>01/01/2006
    Individually to_date function works fine but i want to club both to get accurate date format of specified month and year.Is there any function for that in sql to get 01/07/2006?

  • Function module to get the dates from the year and the period

    Is there a function Module to get the dates from the year and the period

    Check with :
    To get last day of period use .
    LAST_DAY_IN_PERIOD_GET.
    To get last of month Use :
    RE_LAST_DAY_OF_MONTH
    HRVE_LAST_DAY_OF_MONTH
    LAST_DAY_OF_MONTHS
    ISB_PREVIOUS_PERIOD_DATE_GET
    Thanks
    Seshu

  • Depreciation is not executed for last month and the period is closed. Giving Error in this Dep. Cycle.

    Hi All,
    We had a month End scenario where the depreciation for a company code is not executed for the last month and closed the period without checking it.
    While  running the Depreciation posting for this month we encounted a error that last motn period is closed. Can we do the depreciation without opening the period closed. Kindly let us know the options available.
    Regards,
    Lakshmi Narayana

    Lakshmi,
    There is no way you can post depreciation without opening the prior periods. Please discuss with your business and secure all necessarry approval, I believe the business has a process on this kind of situations. As long as it is fully documented, auditors will not find it wrong.
    This is the best time to improve your process, think of possible ways so that business will not forget to post depreciation (e.g send automatic email during 3 days before, 2 days before., 1 day before and during the day of depreciation run).
    Hope this helps.
    Thanks!
    Jhero

  • How to get the Day of the Month and Date on Home Screen

    The home screen has the signal strength on the upper left, the time in the middle and the battery status on the right. What is missing from my old phone (really, really old phone) is the day - like Sunday, and the date - like the 20th. I have to go to a calendar program to get what should be available at a glance, just like the time.
    Can this be done?
    aehaas

    If you put the Apple calendar app on the first screen, it shows the day and date (no month/year). E.g Sunday 20.

  • I recently purchased a new laptop to replace my current one on which I use lightroom. I am also getting a new desktop this month and would like to install lightroom on both of my new computers (i will no longer need it on the old laptop). Can I do this wi

    I understand I can use lightroom on up to two computers as long as I am not running them at the same time. My question is, can I uninstall it from my current laptop and install it on two new computers?

    Yes, you can do that. To be in compliance with the Lightroom license, it needs to be installed on only two computers. But there is no activation/deactivation process for Lightroom. So it will be fine for you to install Lightroom 5 on both of your new computers. This document might help you in making the move:
    How do I move Lightroom to a new computer? | The Lightroom Queen

  • Financial Reporting - Derived data and calendar periods

    I have two questions with Financial Reporting
    1. I have a P&L report that shows the full 12 months. FR displays the derived data of the next actual period even if there has been no consol. It therefore looks like all the data has been reversed to zero. Is there a setting to stop FR from displaying derived data?
    2. The application has a June year end. We want to display in the report titles the months based on their calender year rather than the fiscal year. This means that for Sept we want Sept 2011 to display, not Sept 2012 that will come from the Year dimension. Is there a function to handle that?
    regards

    1. I have a P&L report that shows the full 12 months. FR displays the derived data of the next actual period even if there has been no consol. It therefore looks like all the data has been reversed to zero. Is there a setting to stop FR from displaying derived data?
    The answer for this might be the VIEW dimension.If u have taken YTD please change it to Periodic and give a try.
    2. The application has a June year end. We want to display in the report titles the months based on their calender year rather than the fiscal year. This means that for Sept we want Sept 2011 to display, not Sept 2012 that will come from the Year dimension. Is there a function to handle that?
    While creating application profile we have a choice to select the years or just look into application settings.I am not sure just give a try.

  • Function module to get posting date from posting year and posting period

    Hi all,
    I need a function module which will return posting date when posting period and fiscal year is passed to it..
    Thanks and regards,
    Puja.

    Hi puja
    try this FM
    this will solve ur problem
    G_POSTING_DATE_OF_PERIOD_GET
    G_POSTING_DATE_OF_YEAR_GET
    FCJ_CHECK_POSTING_DATE
    Cheers
    Snehi Chouhan

  • FM to get the number of days in Year,month and days by giving number of day

    Hi ALL,
    This is quit differnt.
    I need to give input the 'start date' and the 'number of days' and get the total days from the start date in year,month and day format.
    for example.
    start date :01.01.2009
    number of days as 32
    then i should get
    years:0
    months :1
    days :1
    Pleas help me out.

    hi Anusha,
    first u pass the date and the days to the following fm you will get the result date....
    data:date type sy-datum,
          r_date(10) type c.
    date = sy-datum.
    CALL FUNCTION 'CALCULATE_DATE'
    EXPORTING
       DAYS              = '32'
       MONTHS            = '0'
       START_DATE        = date
    IMPORTING
       RESULT_DATE       = r_date
    write:/ r_date.
    then you need to pass the result date and the date to the following fm to get the required output...
    CALL FUNCTION 'HR_HK_DIFF_BT_2_DATES'
        EXPORTING
          date1                   = r_date
          date2                   = date
        IMPORTING
          years                   = v_years
         months                 = v_months
        days                     = v_days
        EXCEPTIONS
          invalid_dates_specified = 1
          OTHERS                  = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    here u will get the difference in days,  months and year...
    i hope u wil get help from this...
    regards
    Ashu  Singh

  • SSRS Totals by Month and Grand Total

    I am almost done with this report.  It uses alot of lookup functions to connect 2 datasets together.  I have grouped the data by month and by a column called Alt.  Now I need to get the sum for each month and then a grand total but I'm not
    sure how to do this. 
    My data looks like this:
    Year/Month Column:              Alt:              Number                 
                 14/01                        A                    
    50                                  
                 14/01                        B                    
    25
                 14/01                       C                    
    10
    Needs to add a Totals Row or something where it would say like:
    14/01 Total = 85                                
                 14/02                        A                   
    55
                 14/02                         B                  
    30
                  14/02                       C                   
    20
    Total Row: 14/02 = 105
    Grand Total: 190
    Is there a way I can do this?  Should I use a matrix instead of a regular table? 
    Also since most of this is from lookup functions, I have to use reportitems! function in my equations, and usually it says that an aggregate cant be used with reportitems

    I think you are combining the concept of the Local currency and the document currency. Currently, your ALV has the Document Currency values (e.g. EUR, ARS, USD) whereas (I assume) you have the local currency as the USD.
    To get the total on the USD (Local Currency), you have to select and bring the Local Currency as a new columns. E.g If you are selecting data from BSEG than you must select DMBTR (amount in local currency) with the WRBTR (Amount in Document currency). Than You can than make a Grand total on this column.
    Regards,
    Naimesh Patel

  • Bex reports in non english language

    What setting required to get the Bex reports in Japanese language. Provide more inputs..

    Hi,
    Regarding to the Japanese Displaying issue, it depends on what Bex version are you using to display the BEx report and please refer to thefollowing information:
    1. If you are using BEx3.5 tool    It is necessary to set all the regioan and language settings in
       control panel of the issued machine to "Japan" and "Japanese",
       inculding the "format" "unicode" "keyborad and     languages"       and
       "location" tabs. For more details, please refer to the attached
       "region and language settings.jpg" file.
       After set the language to Japanese, you need to restart your
       PC and then you can verify if the Japanese Characters can be
       displayed correctly in BEx3.5 report.
       Note:Users are supposed to understand Japanese if they need to
       display and read Japanese reports, so all the settings are required
       to set to Japanese, if users need to have PC with English menu
       displayed but with report in Japanese, they can leave "display
       language part" as "English" so the OS system menus will still be in
       English.
    2. If you are using BEx7.0 tool
       Basically you don't have to set anything specially on the client
       machine as Bex7.0 is a multiple language supported version, meaning
       with all Engish settings on local machine, once you logon Bex in
       JA, Japanese Characters can also  be displayed correctly in the
       Bex reports. Just make sure that the relevatn reports data have
       JA maintained in BW backend system and JA language is installed
       correctly.
    Thanks,
    Venkat

  • Display Bex Report in Hierarchy manner (all levels in one column)

    Hi experts,
    Pls. help me in providing any possible solution to get the Bex report in a customized manner as all levels in the report should come under one column as tabbed format with out going for creating hierarchy externally.
    i anm providing 3 example levels below to get some idea as i am not able explain in detail,
                        1.  corporate  (1st level)
                         2. company (2nd level)
                         3. Line of Business (3rd level)
    normal output would be,
    column1        
    corporate
      column2 
    company
    company2
    company3
    column3
    line of business
    line of business2
    line of business3
    required report
    column1
    corporate
    company.
    company2
    company3
    line of business
    line of business2
    line of business3
    need the above manner  in column ( all levels should come in one column in tabbed manner)
    please help in any possible solution to get the required report display.
    Thanks,
    Anil.

    Hi Joao,
    Technically, Description ID column in rpd works with prompt selection because where you will have to select "Enable user to select code by column" which brings sql with id rather than text as shown below
    OBIEE, Endeca and ODI: Description ID column - OBIEE 11g
    In your case you should go with new column with concatenation let me know if you have any difficulty in doing it !
    Thanks,
    Saichand

  • How to get a Crystal report as an iview in Portal

    Hi,
    Please let me know how to get a crystal report to Portal.
    Regards,
    Pradeep

    Hi,
    I used URL iview option to get the crystal report in portal and am able to view it. Thank you all for your inputs.
    But as of now SSO is not configured between BOE and BI system, so when i click on URL iview initially it asks me for credentials to BOE InfoView and after entering that it again asks for BI login as the data has to be picked from BI server.
    We are going to configure SSO mean while i just want to know whether it is possible to pass the id and passw as parameters to this url iview, if so what are the parameter id's i need to maintain to pass id and passw.
    Let me know on this.
    Regards,
    Pradeep
    Edited by: pradeep balam on Jul 29, 2011 8:34 AM

Maybe you are looking for