To get started , connect the camera

I purchased a hp pavillion laptop on 15 august 2014 . but it started giving problems such as slow speed and not enough performance which was promised . so basically i bought this laptop for video conferencing purpose but i started gettting a problem , the camera suddenly stopped working for a while . everytime when i strted my video conferencing the camera would suddenly stop n not work again , even the stock camera application didn't work. I went to the my hp service center but no satisfactory help was given .they asked me to buy the recovery disk , by calling at some toll free number 1800112267, although my laptop is in warranty . I feel very much harassed and frustrated. Kindly help me to overcome this problem

hi BassamMord,
Welcome to the Lenovo Forums.
It's possible that driver for the camera is not installed -- causing the Windows Camera app and Skype to show the camera error.
Can you try to:
1. Install the Integrated Camera Driver (reboot the system if necessary).
2. When finished, navigate to the Device Manager and look an item called imaging Devices -this will show and verify if the camera device is successfully instaled on the system.
If the camera is successfully detected, try opening Skype or the Windws Camera App. and observe.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

How do i get video from my sony hx100 digital camera to my mac? after connecting the camera via the supplied usb cable, iMovie shows icons for 5 videos, but none will load.

i've connected the camera to the mac using the supplied usb cable. imovie shows 5 icons for videos but all of them have the red circle with slash through them and the box to import them is grayed out.

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?

My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?

I'm guessing it's a hardware problem. Your best option is to go to an Apple Store as soon as you can to try and sort this all out. While you're waiting to go visit an Apple Store, however, I'd imagine you still want to use your phone. To circumvent your hardware button problems, try enabling Assistive Touch by going to Settings>General>Accesibility>Assistive Touch. You'll see a small box appear on your screen. Tapping it will bring up several options for you to choose from, like the home button. Clicking the "Device" option will give you several options for controlling your phone that you would normally use hardware buttons for (i.e. volume, lock your phone, etc.) Hope this helps and good luck!

Airport & Can't get video from the camera

Ok, So I've been reading through the discussions trying to figure out what's wrong, and then how to fix it. I keep getting error "Can't get video from the camera"
Here's my setup: OSX 10.4.4 on 1 Ghz PB. iChat 3.1.1, I'm connecting using a Dazzle Hollywood DV Bridge with an analog camcorder attached. I can get a video preview, but no video chats.
My connection is via a DSL modem (Cisco 725) and my ISP says all the ports needed for iChat are not blocked. my local network goes from the Cisco to an Airport (dual ethernet) which then distributes the IP addresses.
I've read that airports need to be switched so that they do not control the IP addresses, but when I do that my network stops working. Is there any way around disabling the NAT on the airport?
PowerBook G4 1MHz/1Gb Mac OS X (10.4.4)

Hi EdM
I think that I'm starting to see the light... Let me see if I have this right.
My PB has an IP of 10.0.1.4 via Sys Prefs, etc..
And the Airport is 10.0.1.1 and is distributing IP addresses (hence the 10.0.1.x IP numbers - right)
Yep (so far)
So using Terminal I need to type:
set net entry add 10.0.1.4 5060 udp
...and so on...
Nope. You need to have Distributing Addrress deselected in the Airport if it is in the link
With the Modem doing DHCP you should get an IP from it (mostly 10.0.0.3 as the Airport will also be given one)
Once the Modem's issued IP appears on the Mac then you log on to the modem (10.0.0.1) in Terminal, and Forward the ports to the IP the Mac gets.
Your wife's PC is also likely to need some ports open for her Apps and this will be a different IP.
I have only brought some of the details from the Port Forward site so I would make sure you check any Read Me or manual (On the CD ? web site ?) that might give you more clear instructions.
I would set it up with the Airport Out of the loop first as this will confirm the modem is in DHCP mode (you will not get an IP otherwise).
9:48 PM Thursday; February 16, 2006

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

HT202037 Connect the camera to I pad

When i connect the camera (Samsung DV300F) I get a massage saying "The attached accessory uses too much power" And I can not proceed

You may need a powered USB hub to connect that camera with the Lightning USB camera adapter.
However, why not use the samsung App for your camera which can do this via WiFi.
See here:
MobileLink by Samsung Electronics CO.LTD.
https://appsto.re/us/pnaiE.i

I have an Air running Mountain Lion. I also have a digital point-and-shoot camera, but have never downloaded any images from the camera to this Air. If I connect the camera to the Air, what might I expect? Will connecting the camera to the Air by a cable

I have an 11" Air with lots of remaining capacity running Mountain Lion. I also have a digital point-and-shoot camera. I have never downloaded images from the camera to this Air. However, if I just connect the camera to the Air's USB port, with the camera's available cable, and the Air is open, will a program like ImageCapture or iPhoto, auomatically come up, and I can begin to download wanted images? Or, will this sort of connection delete or fry everything on the Air? Do I need any other software on board? Will current Apple onboard programs allow me to download images from my camera and not destroy everything else?

Answered. Thanks.

How to get rid of the camera icon on the lock screen

how to get rid of the camera icon on the lock screen

joannelyn wrote:
How do you get rid of the camera feature on the lock screen?
You don't, unless you disable the Camera app entirely.
It's such a nuisance...
Really, how so?
I don't want people going into my photos or my iphone!!
If you add a passcode to your iPhone as you should, then there's no way they can see anything in your iPhone. Of course, if the passcode is set but not enough time has elapsed that's different -- but that has nothing to do with this icon.

Can not get example to work after following instructions given in "Getting Started with the NI LabVIEW C Generator" guide

We explored using sbRIO for our project, for different reasons we ended up going with a different embedded solution . We are currently evaluating the LabVIEW C Generator to convert some of the core analysis routines from LabVIEW to C so the team that will be creating the embedded solution don't have to re-implement them from scratch.
Before converting our code, I followed the instructions given in the "Getting Started with the NI LabVIEW C Generator" manual to create a static library created inCygwin using GNU Compiler Collection (GCC).
I managed to compile the code, but when I type "run GCD.exe" in the Cygwin console, I just see the window flash with no time to see if the result is correct or not. I modified the main.c cde to add a getchar(), but the window still just flashes and now I am left with the GCD process still running and have to kill it using Windows Task Manager.
Has anyone else got this example to run? I am sure I am missing an obvious setting or step, please help me.
More details below.
Thanks,
Fab
Here is a video showing the steps I followed
If you don't want/can't see the video. Here are some screenshots of what I have done so far:
GratestCommonDivisor.lvproj C Generation build specs Information:
C Function prototype definition:
I copied Makefile located at: C:\Program Files (x86)\National Instruments\LabVIEW 2011\examples\CGenerator\Tutorial\Cygwin
and replaced both Makefile and Makefile.cygwin in the directory where the C code was generated
I also copied main.c from the same location and replaced the one generated
Here is the snapshot of the results after executing "make GCD.exe"
Then to run it I just type
I see a window open and close really quickly and I never see the result. I have tried adding the getchar() line to the main.c file, but still I don't get to see the results.
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion

Hi Kevin,
I hope you had a good Thanksgiving. I am attaching a zip file with the LabVIEW project, my build specification and my version of "Greatest Common Divisor.vi", which should be the same as the one that you have that ships with the LabVIEW C Generator, but just in case. I am also attaching a zip file with the C files generated by the LabVIEW C Generator.
You can also see the video I posted earlier with the steps I followed. I hope you are able to point out where I went wrong.
Thanks,
Fab
Certified LabVIEW Architect * Certified Professional Instructor * LabVIEW Champion
Attachments:
GreatestCommonDivisor.zip ‏8 KB
CGen Files.zip ‏71 KB

Using an external hard drive to connect the camera to the Mac Book Pro

I am about three weeks away from a 9 to 4 pin firewire cable. In the meantime, I am logging and capturing from my Canon AX HI through my external hard drive. I am not super amazed at the quality of the image, it's noisy.
I am using HDV tapes, and I don't beleive the lighting should be causing the issue.
Does anyone know if using the external hard drive to connect the camera to my Mac Book Pro is compromising the quality of the image? Can I expect a beautiful strong image on a lap top?
Thanks for any help.

There is ZERO quality loss when you capture via firewire. It is a digital transfer of files...that's it. The issue you have is that you are trying to judge the quality of your image based on what you see with your computer monitors, and that is simply the LAST thing you should be doing.
And since this is HDV, the only way to monitor that is with an HD card or I/O device, and an HD monitor or TV. Like the Matrox MXO2 mini or AJA I/O Express mini and HDTV.
Shane

I updated my iPad OS this morning, and now I can no longer use iMessage to send pictures. When I try to get one for the camera tool, it blows up. Is this a known problem?

I updated my iPad OS this morning, and now I can no longer use iMessage to send pictures. When I try to get one from the camera roll, it blows up. Is this a known problem?

your ipad explodess? It's in pieces everywhere?
the picture opens and is zoomed in and you cannot zoom out?

HT4101 What if I connect the camera adaptor and it says there is not enough power to support it? (fully charged iPad)

What if when I connect the camera adaptor attachment and a message appears that there is not enough power? My iPad is fully charged and I was only downloading three pictures. ???

This might help ya out -> iPad: Using iPad Camera Connector with unsupported USB devices
If you encounter an issue trying to connect a digital camera through an unsupported USB device, try the following steps:
Disconnect the iPad Camera Connector from iPad.
Disconnect any USB device connected to the iPad Camera Connector.
Restart iPad.
Reconnect the iPad Camera Connector and then connect your digital camera directly to the iPad Camera Connector.
You may need to connect certain cameras, USB Audio, or MIDI devices to a powered USB hub for the iPad Camera Connector to detect them. Find more information on using the iPad Camera Connection Kit.
Note: If you encounter an issue using a USB audio or MIDI device, contact the manufacturer to confirm that the device is compatible with the iPad Camera Connector.
What type of camera do you have connected to the adapter?

Getting started with the BC Open Platform

Hey BC partners,
Welcome to the BC developer forum!
To get started, just visit http://developers.businesscatalyst.com/ (username: alpha, password: bcdevdocs) and follow the Getting Started tutorials. This is a dedicated developer documentation site which includes information on how to register and create an app, links to API endpoints, modules and tag references and sample apps.
Here's what you should do:
Go to http://developers.businesscatalyst.com/getting-started/ and have a look at the introduction pages
Sign up as a developer and register your app, by clicking the "Create an App" button on the top right part of the screen: http://developers.businesscatalyst.com/getting-started/register.htmlNOTE: For now, all requests are manually reviewed and approved, it might take a couple of days for your app key to be sent
You'll receive the app key over email, or further clarifications, if needed.
While your key is generated, follow these steps to create a "Hello World" sample app on your site: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html#hello_ world
Once you receive the app key, you can start building your app: http://developers.businesscatalyst.com/getting-started/building-your-first-app.html
Here's another sample app and instructions on how to use it and understand how it works: http://developers.businesscatalyst.com/samples/meet-the-team-app.html
Other useful developer resources:
Customizing the Admin Console menu using an app: http://developers.businesscatalyst.com/developer-documentation/customize-admin-menu.html
Get started with the Business Catalyst APIs: http://developers.businesscatalyst.com/developer-documentation/api-reference.html
API endpoints reference: http://docs.businesscatalyst.com/content/api-endpoints/index.html (username: alpha, password: bcdevdocs)check out the new Authentication, FileSystem and the webapps/webapp items APIs
The bcapi.js SDK - http://adobebc.github.io/bcapi.js/index.htmland how to use it: http://developers.businesscatalyst.com/developer-documentation/sdk-reference.html
Best practices when developing apps: http://developers.businesscatalyst.com/developer-documentation/best-practices.html
Within the next few months our team will continue to develop these features with the help of the Beta Group, and then open the development program to all partners of Business Catalyst.
We hope that you are just as excited as we are to embark in this new direction for Business Catalyst, and shape the future of the platform.
If you run into any problems or have any questions, start a new discussion on this forum
Enjoy,
The Business Catalyst team
P.S: Make sure to sign up to receive email notifications from this forum - by going to http://forums.adobe.com/community/business_catalyst/developer_forum and clicking "Follow this forum" in the Notifications pod on the right side of your screen.

Hi,
Although I'm learning I am a complete programming / javascript / json / jquery novice so my apologies in advance if this is a stupid question or i have failed to understand the new restful api functionality which is available under this beta.
In the past, where a client has had really specific functionality that was not achievable within the BC framework, I have implented an external php application (with the help of a web developer) and simply linked to it via a sub domain. Obviously not ideal.
My hope is that the new api functionality will open up a range of possibilities that will go some way toward eliminating the need to build extenal applications and simply extend the existing BC framework using the added api functionality.
One example that i would like to move solely on to BC is the following - http://mylist.grocerwatch.com.au/
The above is a grocery pricing comparison website whereby the applicaton highlights the cheapest and best value (comparible) products. The application also allows the user to select from the items displayed to create a shopping list showing where to buy the selected products for the best value. The user can also email, print, or save their shopping list.
My question is for someone who is more farmiliar with the new api and who is perhaps more experienced than me with programming. Would it be possible to create the above solely on BC without sacrificing speed, security, functionality etc?
Thanks.

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

"Disconnected from Screen Sharing because: Can't get video from the Camera"

Whenever I try to do Screen Sharing with another Mac (with Leopard), I get this warning:
"Disconnected from Screen Sharing because: Can't get video from the Camera"
It doesn't seem to affect video chats, which I can do just fine.

It's an AirPort Express, but the problem doesn't seem to be unique to the router. I tried it in another location with another router and it still didn't work.

To get started , connect the camera

Similar Messages

Maybe you are looking for