To get SUS PO from ECC PO

Hi all,
Is there any FM to get SUS PO from ECC PO?
I know, we can get it by using the tables BBP_PDHGP and CRMD_ORDERADM_H, to get the details. But, wanted to know if there
is any FM to do this.
Thanks & Regards,
Razia Shaheen

Hi,
What is business side requirement? If you share it, we can think better solution.
Have you checked the FM BBP_PD_SUSPO_GETDETAIL?
Regards,
Masa

Similar Messages

Get Plant data From ECC Via. Midedleware

HI,Experts :
I work in SRM7.0.ECS!
I get material data fron ECC Via. CRM Middleware .BUT the Plant data not in it .How can I get the plant data (just plant number) Via. CRM Middleware ? I need your suggestions warmly?
BR
Alex!

Hi Alex
check these two reports in srm 7.0
BBP_GET_LOCATIONS_ALL
BBP_LOCATIONS_GET_SELECTED
after replicating plant
generally in srm 5.0 we run any one of the report and bring the plant into srm and map the plant in extended attribute tab in locations
here we type BP number ( of plant - once you transfer a plant from ecc to srm , it creates a BP for each plant) and we map as said earlier.
check it up .
try one plant BBP_LOCATIONS_GET_SELECTED by this report . make ensure no ranges available for Business partner in bucf tcode
br
muthu

How to get customers have blank Juristriction code from ECC to CRM?

Hi,
We have recently implemented CRM in our organization. We are planning to bring customers where they dont have region/country maintained i.e., they dont have juristriction codes maintained but still how could we get those customers from ECC to CRM system? we are at BBPCRM/600now.
Do we have to import any OSS note? Please advise.
thank you,
Anil

Hi ,
you can also check with standard program like :
program;-
SMOF_REQUESTN- to start CRM Request
SMOF_MONITOR_SMOFRSTAT- Monitor Request
these function module you can check:-
SMOF_START_DOWNLOAD_OR_REQUEST-Initialialize object for initial download in table smof_dstat
Functionality-Start a Download or a request. Is called from transaction R3AS
transaction :
R3AR3:- Monitor Requests
Hope it will useful.
thanks
Hemant ghiya

Fetch field values in GTS system from ECC and missing field values

Hi,
I am developing Adobe Form "Certificate of Origin" in GTS (Global Trade Services) system. I require to get Customer PO and Country of Origin from ECC system for each line of Invoice (VBKD-BSTKD and EIPO-HERKL respectively). Pls let me know, how can I get these values from ECC to my Adobe Form?
Also for the "Commercial Invoice" form, value of below fields are not coming in GTS. Pls tell me, if there is any another way I can get data for these fields ?
1. Tax Number
2. Tracking Number
3. Estimated Export Date
4. Payment terms
5. Carrier
6. Package count
7. Net wt and Gross wt.
Thanks !!!

Hi Sri,
you must align SD0C level.
Go to SPRO --> SAP Global Trade Services --> SAP Customs Management --> Document Structure --> Assignment of Item Categories from Feeder Systems --> Assign Item Category at Feeder System Group Level
For Example: SD0C TAN CLPOS Standart Item
When you are done, just re-execute LUW in SM58.
Regards,
Gabriel.

How to receive an RFC message in PI ABAP stack from ECC

Hi mates,
I am involved in a scenario in which we want to receive a message in PI (ABAP stack) from ECC (ABAP stack as well).
We created a RFC destination (3) in sender system (ECC) so both stacks could be linked. However, we do not know how to receive this message once we are in PI Abap stack.
In sender system code, a call destination takes place, an this destination stands for the one destination i noted before.
BUT, as this RFC does not exist in PI, i wonder what steps have to be done in PI in order to be able to get the message from ECC.
Hope you guys can guide me through this. Any help
Thanks a lot in advance and best regards,
david

Hi Anand,
No no, i do not want to create any sender RFC Comm Channel.
What i want is to receive (by means of no PI adapter) a message in PI (abap stack) from ECC (abap stack), just by a RFC connection (type 3) between both systems.
I will try to explain in more detail what i want to achieve:
1) A standard SAP program is executed in ECC, at the end, a call destination is done.
2) This destination call, calls an RFC destination that points to PI (RFC dest in SM59, type 3)
(Until now, nothing is done in PI, there is no sender adapter, we just linked both ABAP stacks)
3) In ABAP stack of PI, we want to receive the message, make any transformations and send the target emssage to PI adapters
4) From that moment on, a ordinary PI integration is done.
So my question is, what kind of stepd so i have to perform to get the message from ECC in PI without creating any object in PI (ESR, ID, i mean). Just as if we wanted to receive a RFC message, lets say, in BI (abap side) from ECC.
Hope you got me this time.
Thanks a lot in advance.
Best regards,
david
Edited by: David de Miguel on Dec 27, 2010 11:48 AM

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

PO XML proxy is triggered twice from ECC to SUS

Dear Experts,
We are using Classical scenario. Once a shopping cart is created and approved a PO will be created in ECC through PI and corresponding SUS PO will be created in SUS system, It will be triggered from ECC. when we check in SXMB_MONI transaction. There are 2 proxy genetared to SUS. Actually only one should trigger.
Kindly guide how it can be checked.
Thanks & Regards
Arun.K.P

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

Error while transferring Purchase Order from ECC to SUS

we are working on plan driven procurement and transferring the PO from ECC to SUS, we are getting the error as "No partner found for partner number ECCSUS8".
In ECC the Vendor No is ECCSUS8, trasfered vendor from ECC to SUS. Vendor registration is done based on the mail generated and vendor login is created in the portal and assigned the roles.

Hi
Are you facing this error in PO transmission to SUS (as you mentioned below)? or you are facing this error while sending out the vendors from R/3 to SUS from BD14?
If you are facing this in vendor transmission, you need to remove the tick (flag) "Use self reg component" in SPRO-SRM server-Supplier Self-ServicesMaster DataMake Settings for Business Partners. Then you can transmit the vendors from R/3 succesfully.
If this error is in PO transmission, need to analyse further.
Pls do let me know.
Thanks
Kiran

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Vendor Master Replication Error from ECC to SUS : Error in ALE Service

Dear Experts,
We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
Please provide inputs to overcome this problem
Thank you,
Regards,
Ravi

Hi,
Check
Re: Idoc Error Status "Entry in outbound table not found "
Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
Set up them again and When these have been set up try reprocessing your IDocs from BD87

Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Replicating GR from ECC to SUS

Hi
We are on SRM6.0 with MM-SUS classic scenario, in standrad MM-SUS scenario when ASN is created in SUS respective inbound delivery is created in ECC and GR if created agaisnt this inbound delviery GR is replicated to SUS.
If user doesn't want to do GR agaisnt inbound dleivery but against PO will the GR be replicated to ECC, if not replicated can this configurable or is it an enhacnement that is required.
with regards
Manjunath

Hello Manju,
You can use RPODDELVERY for replication of GR from ECC to SUS.
You can find more details
Re: What reports are used to send PO, Conf and Inv from MM to SUS?
Hope this helps.
Thanks
Ashutosh

Vendor replication from ECC to SUS

Hi Gurus,
We are replicating vendors from ECC to SUS.
The XML message is failing in the SUS side.
The error is
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application
Please find below SXMB_MONI trace
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Program:
It seems similar issue has been resolved in the below thread but there is no mention of solution.
ABAP Inbound Proxy Error !
Please help in resolving the issue.
With Regards,
Malay

Hi Malay,
Kindly check if you have defined the logical system of SUS system under T-code SALE in your SUS client.
Regards,
Nikhil

Invoice and Credit Memo from ECC to SUS

Hi Gurus
Is it possible to replicate Invoice or a credit Memo from ECC to SUS if the PO was delvired to vendor through SUS.
with Regards
Manjunath

HI ,
part1 :
ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario. IDOC "GSVERF01" is used for this purpose.
part 2 : Invoices can be created in SUS system by vendor against ASN ( Advanced Shipping Notification or purchase Order . The invoice is transfered to ECC system through XI. Message Interface for the same is "InvoiceRequest_Out" .
For reference please check
http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
Regards,
Kalandi

How to get data from ECC --- Sales Order,Delivery,Transfer Order & Invoice

Hi,
Good day.
I'm ABAPer and I need to get Sales Order,Delivery,Transfer Order & Invoice data from ECC. The said data will be displayed in the custom form that I need to create. How exactly do i get the said data above?
Can I get them in the tables avaialable in GTS? Where?
Or do I get the data directly in ECC? How?
Thank you very much!
Best regards.
Brando

First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
2-Go to document tab there enter Sales order no/PO number then execute it.
Then go to GTS server in compliance management module you can get all the information.
Regards
Sitanshu Panigrahi

To get SUS PO from ECC PO

Similar Messages

Maybe you are looking for