To get the spool Number
How to get the spool number when i trigger a print from smartform .
You will get the spool no. in the parameter <b>JOB_OUTPUT_INFO</b> after calling the Smartforms function module in print program.
Field is <b>JOB_OUTPUT_INFO-SPOOLIDS</b>
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_PARAMETERS =
* CONTROL_PARAMETERS =
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
* OUTPUT_OPTIONS =
* USER_SETTINGS = 'X'
* your parameters
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = JOB_OUTPUT_INFO
* JOB_OUTPUT_OPTIONS =
TABLES
* your tables
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
<error handling>
ENDIF.
Regards
Similar Messages
-
Hwo to get the spool number from report output
Hi,
I am displaying some output in the report using write statements and within my program I need to collect the output written by write statements and send it as an email.So for that I need to generate the spool number and I am using the below code to do that
CONSTANTS:
l_linsz TYPE sy-linsz VALUE 201, " Line size
l_paart TYPE sy-paart VALUE 'X_65_132'. " Paper Format
l_uname = sy-uname .
l_repid = sy-repid .
*-- Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
authority = space
copies = '1'
cover_page = space
data_set = space
department = space
destination = space
expiration = '1'
immediately = space
new_list_id = k_x
no_dialog = k_x
user = l_uname
IMPORTING
out_parameters = l_mstr_print_parms
valid = l_mc_valid
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
*-- Make sure that a printer destination has been set up
*-- If this is not done the PDF function module ABENDS
IF l_mstr_print_parms-pdest = space.
l_mstr_print_parms-pdest = k_lp01.
ENDIF.
*-- Explicitly set line width, and output format so that
*-- the PDF conversion comes out OK
l_mstr_print_parms-linsz = l_linsz.
l_mstr_print_parms-paart = l_paart.
l_variante = sy-slset.
* submitting the spool request
*SUBMIT (l_repid) TO SAP-SPOOL*
*SPOOL PARAMETERS l_mstr_print_parms*
*WITHOUT SPOOL DYNPRO*
*AND RETURN.*
*Calculating the lenth of report name
lv_len = STRLEN( l_repid ) .
*consutrucing the database variable rq2name to search the spool
*request
IF lv_len >= 9 .
CONCATENATE l_repid+0(9)
l_uname+0(3) INTO lc_rq2name .
ELSE.
lv_len = 9 - lv_len .
DO lv_len TIMES .
CONCATENATE lv_temp '_' INTO lv_temp .
ENDDO.
CONCATENATE l_repid lv_temp
l_uname INTO lc_rq2name .
ENDIF.
*selecting the spool request using the above consructed varibale
SELECT * FROM tsp01 INTO TABLE lt_tsp01
WHERE rq2name = lc_rq2name .
*sorting the interbla table
SORT lt_tsp01 BY rqcretime DESCENDING .
*reading the first spool request
READ TABLE lt_tsp01 INTO ls_tsp01 INDEX 1.
but the problem with the above code is I am using variants to execute the report but when the above piece of code is getting executed it is clearing all the variant values on the selection screen and it is defaulting the values on the selection screen.
Is there any way i can execute the above code without any problem in the selection screen.
Thanks
Bala DuvvuriHello Bala,
I wouldn't SUBMIT the same program to get the Spool number. You can achieve the same by [NEW-PAGE PRINT ON|http://help.sap.com/abapdocu_702/en/abapnew-page_print.htm#!ABAP_ADDITION_1@1@] command.
Check the code snippet i've provided below:
DATA: spfli_wa TYPE spfli,
print_parameters TYPE pri_params,
valid_flag TYPE c LENGTH 1.
START-OF-SELECTION.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
no_dialog = 'X'
IMPORTING
out_parameters = print_parameters
valid = valid_flag
EXCEPTIONS
invalid_print_params = 2
OTHERS = 4.
IF valid_flag = 'X' AND sy-subrc = 0.
* 1. Write the output to the output list(no spool is generated)
SELECT carrid connid
FROM spfli
INTO CORRESPONDING FIELDS OF spfli_wa.
WRITE: / spfli_wa-carrid, spfli_wa-connid.
ENDSELECT.
* 2. Write the output to SAP spool(no list is displayed)
NEW-PAGE PRINT ON PARAMETERS print_parameters NO DIALOG.
SELECT carrid connid
FROM spfli
INTO CORRESPONDING FIELDS OF spfli_wa.
WRITE: / spfli_wa-carrid, spfli_wa-connid.
ENDSELECT.
NEW-PAGE PRINT OFF.
MESSAGE i000(zibi027) WITH 'Spool' sy-spono 'is generated!!!'.
"You can use the spool number (SY-SPONO) to email the list output
ENDIF.
Hope this helps.
BR,
Suhas -
How to read spool file and get the spool file number
Hey everyone.
I created a program ztemp that is calling another program ztemp2 within, ztemp2 creates a spool file. Now the requirement is I need to write a code within ztemp to download that spool request and then convert it to the pdf file. I know I can use program rstxpdft4 to convert the spool file to the PDF but for this I need to give the spool number, so can you please tell me how can I get the spool number and then fetch it to the program rstxpdft4 .
Thank you.
Rhul goelHi,
Please check the [link|Convert ABAP List to PDF and display without downloading first; (Rich's reply) and get the spool similarly.
Or read from table TSP01 to get the latest spool using sy-uname.
Regards,
Srini. -
How to get the spool request number ?
Hi All,
I am working on a smart-forms. I am using a custom transaction to print these smartforms. When I execute
the transaction the print screen comes where I can do
print preview or print.
Now to convert this Smart Form to PDF I need to know the spool request number to use in the report called RSTXPDFT5.
How do I get the spool request number ?
Do I need to do some changes in spool control options of print screens to get the spool request number or something else ?
Please let me know.
Answers will be awarded...
TusharHi,
You will get the spool no. in the parameter "job_output_info" after calling the smartform function module in print program. The spool ids of the prints is stored in table job_output_info-SPOOLIDS.
Regards,
Gagan -
How to get the forma name using the Spool number
Hi all,
Please tell me how to find the Script name or Smartform name using the SPOOL NUMBER
Regards
AjayHi Ajay,
you could use the FM 'SSF_FUNCTION_MODULE_NAME' inorder to get the Smart Form Function Module name by giving the name of the form.
Reward points if this helps,
Kiran -
I have lost my iphone, how can i get the IMEI number?
i have lost my iphone, how can i get the IMEI number?
If you need the IMEI for an insurance or police report:
how to find IMEI, etc
http://support.apple.com/kb/HT4061?viewlocale=en_US&locale=en_US
But as Carolyn Samit said above, you cannot track the iPhone by IMEI. -
How do i get ahold of a real person? My phone is only showing a black screen so I can't get on it to get the serial number or call anyone. please help
http://www.apple.com/support/iphone/contact/
-
How to get the total number of pages printed in a report?
Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.i found the solution, thanks
-
HT1349 My Ipod was stolen how do i get the serial number?
My IPOD was stolen how do I get the serial number?
The easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices.
-
How can you get the serial number of your ipod touch when it has been lost?
My daughter took her ipod touch to a friends house and it is now missing...can anyone tell me how to get the serial number so that we can report the missing device? Thanks to anyone who can help.....
On the syncing computer go to iTunes>Preferences>Device and hover the mouse pointer over the iPod backup and the SN will show in a box. Also see:
iPod: How to find the serial number -
My iPod touch was stolen. Can I get the serial number from my iTunes account?
See the end of:
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I had 2 Ipads, a mac book pro and a Mac Air stolen 2 weeks ago
I am trying to locate one of the serial numbers, but cant find the last box. Can I get the serial number from Apple. It was registered and now it is not showing up as one of my products.
ThanksThe easiest way to find your serial number is this Open Itunes...click help... run diagnostics.....(tick or untick as necessary) so that you just have ticked the last two, device connectivity and device sync. run these tests. it will say no ipod/ipad found but will give results of test....scroll down to bottom of results... here you will find the serial number of your last attached devices.
-
I recently subscribed to Acrobat XI after the trial expired but when I went to activate it I was asked for the serial number. I only have the order number on the invoice. How do I get the serial number for the trial software that is on my computer?
Please do not try to send attachments in mail responses to forum messages. Please return to the forum and click Reply. You can then use the CAMERA icon to add your pictures. Looking forward to seeing what is wrong with your license screens - the general advice is simply to sign in, and everything is done. Make sure you use the SAME Adobe ID that you used to purchase, and check your account details to be sure the subscription is active.
-
How to get the page number in the break section?
Hi expert,
The user wants the page number came right after the Break group name if the break section contains more than 1 page. E.g.
ABC Compnay
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 1
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 2
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
CDE Company
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
How to get the page number in section break level?Hi Wes
* Create a Field on the margin.
* Set its "Source" to "Page Number"/"Physical Page Number".
* Click "Page Numbering" button.
* In "Reset At" list box, choose the Repeating frame that surrounds your detail group in the layout.
This should cause Reports to increment the page number until the "Company" repeating frame resets.
Regards
Sripathy -
this evening has been torturous My phone said I needed to restore thru Itunes/support
I tried and keep getting UNKNOWN Error 3
I tried to get support but I can't open my phone to get the serial number.
Now WHAT????I was doing some research on this problem for a friend and came across your post and thought I should share this:
https://discussions.apple.com/thread/5372052?start=30&tstart=0
Hopefully it helps, good luck.
Maybe you are looking for
-
when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with pre
-
Hi My daughter has a apple mac laptop. It is coming up with a white page with a file picture with a ? mark in the middle of it. It keeps flashing. Nothing will work now and we car'nt seem to work it out. Does anyone have any answers ?
-
View Mapping Error | Migration 10.1.2 to 10.2
Hi Folks It would be great if someone can help me resolve this error. Basically i am trying to upgrade my ATG10.1.2 to ATG10.2. I have executed all the DB scripts successfully, but while doing a data migration for viewmapping changes thats described
-
I am need of some assistance please. I am a system admin and I am trying to create a script that will assist with the tedious tasks I have to do with disabling a user that no longer works for the company. I have created a script so far that will rese
-
Ok i got the 875p neo Fisr pcb 2.9 I have a p4 2.8(800) atm , but im thinking of ordering a 3.0 or 3.2 since i dont overclock much... Decided to go with kingmax ramm unless someone saiys else i got a reply earlier that someone has this and it works.