To get unicode errors for each and every program

hi,
     I have written a program to retrieve all the custom programs and user exits. Now I want to pass all these programs to UCCHECK tcode to get all the errors of each program separately by writing it implicitely.
     Is there any function module for uccheck tcode or else any other option. Pls tell me.
         thanks & regards,
             Sekhar.

UCCHECK is an executable report(RSUNISCAN_FINAL). Please use SUBMIT program (RSUNISCAN_FINAL) along with selection screen field SO_OBJ_N-LOW populated with list of programs identified.
Syntax
SUBMIT report1 USING SELECTION-SCREEN '1100'
               WITH SELECTION-TABLE rspar_tab
               WITH selcrit2 BETWEEN 'H' AND 'K'
               WITH selcrit2 IN range_tab
               AND RETURN.
Regards
Ravikumar

Similar Messages

Example codes for each and every class in API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Try this
http://www.javaalmanac.com/egs/
It's almost complete, but you could help mr. Patrick Chan to write more samples for the few classes left in the Java API...

Example code for each and every class in java API

hi,
Is there any place where i can get example code for eacha and every class in java API.
for eample...if i wanna find sample codes for all the clases in java.lang.*
please let me know ASAP.
thanks in advance

Crossposted here: http://forum.java.sun.com/thread.jsp?thread=570264&forum=54&message=2820774

TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

Try reset iPad (not Restore)
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

How to get LASTDAY for each and every month between given dates..

Hi Friend,
I have a doubt,How to get LASTDAY for each and every month between given dates..
for ex:
My Input will be look like this
from date = 12-01-2011
To date = 14-04-2011
And i need an output like
31-01-2011
28-02-2011
31-03-2011
is there any way to achieve through sql query in oracle
Advance thanks for all helping friends

Here's a 8i solution :
select add_months(
         trunc(
           to_date('12-01-2011','DD-MM-YYYY')
         ,'MM'
       , rownum ) - 1 as results
from all_objects
where rownum <= ( months_between( trunc(to_date('14-04-2011','DD-MM-YYYY'), 'MM'),
                                  trunc(to_date('12-01-2011','DD-MM-YYYY'), 'MM') ) );
The above two query is worked in oracle 11GActually the first query I posted is not correct.
It should work better with
months_between(
   trunc(to_date(:dt_end,'DD-MM-YYYY'),'MM'),
   trunc(to_date(:dt_start,'DD-MM-YYYY'),'MM')
)Edited by: odie_63 on 12 janv. 2011 13:53
Edited by: odie_63 on 12 janv. 2011 14:11

This is regarding printing vertical lines for each and every field

Hi to all.....
1....Hi
here is a requirement
i want to print vertical lines and horizontal lines for each and every field in the output of a report.Here i want to see the output just like table i.e i want to draw line after each field.
                         suppose if the output list contains just 10 records, then the vertical line must end for 10 records.how to draw vertical lines for this requirement.
thanks and regards,
k.swaminath

Hi
In report you can use
sy-uline for horizontal line
sy-vline for vertical lines.
Check this sample report
DATA: BEGIN OF USR_TABL OCCURS 0.
INCLUDE STRUCTURE UINFO.
DATA: END OF USR_TABL.
DATA: L_LENGTH TYPE I,
T_ABAPLIST LIKE ABAPLIST OCCURS 0 WITH HEADER LINE, BEGIN OF T_USER OCCURS 0, COUNTER TYPE I, SELECTION TYPE C, MANDT LIKE SY-MANDT, BNAME LIKE SY-UNAME, NAME_FIRST LIKE V_ADRP_CP-NAME_FIRST, NAME_LAST LIKE V_ADRP_CP-NAME_LAST, DEPARTMENT LIKE V_ADRP_CP-DEPARTMENT, TEL_NUMBER LIKE V_ADRP_CP-TEL_NUMBER, END OF T_USER, L_CLIENT LIKE SY-MANDT, L_USERID LIKE UINFO-BNAME, L_OPCODE TYPE X, L_FUNCT_CODE(1) TYPE C, L_TEST(200) TYPE C.
L_OPCODE = 2.
CALL ThUsrInfo ID OPCODE FIELD L_OPCODE
ID TAB FIELD USR_TABL-*SYS*.
CLEAR T_USER. REFRESH T_USER.
LOOP AT USR_TABL.
T_USER-MANDT = USR_TABL-MANDT. T_USER-BNAME = USR_TABL-BNAME. APPEND T_USER.
ENDLOOP.
SORT T_USER.
DELETE ADJACENT DUPLICATES FROM T_USER.
LOOP AT T_USER.
T_USER-COUNTER = SY-TABIX. SELECT V~NAME_FIRST V~NAME_LAST V~DEPARTMENT V~TEL_NUMBER INTO (T_USER-NAME_FIRST, T_USER-NAME_LAST, T_USER-DEPARTMENT, T_USER-TEL_NUMBER) FROM USR21 AS U JOIN V_ADRP_CP AS V ON U~PERSNUMBER = V~PERSNUMBER AND U~ADDRNUMBER = V~ADDRNUMBER WHERE U~BNAME = T_USER-BNAME. ENDSELECT. MODIFY T_USER.
ENDLOOP.
SORT T_USER BY NAME_LAST NAME_FIRST.
PERFORM DISPLAY_LIST.
TOP-OF-PAGE.
PERFORM DISPLAY_MENU.
    * End of top-of-page
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM DISPLAY_MENU.
    * End of top-of-page during line-selection
AT LINE-SELECTION.
IF SY-CUROW = 2. IF SY-CUCOL < 19. T_USER-SELECTION = X. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = . PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 36. CLEAR T_USER-SELECTION. MODIFY T_USER TRANSPORTING SELECTION WHERE SELECTION = X. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 50. PERFORM TRANSFER_SELECTION. PERFORM POPUP_MSG. ELSEIF SY-CUCOL < 67. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_LAST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 81. PERFORM TRANSFER_SELECTION. SORT T_USER BY NAME_FIRST. PERFORM DISPLAY_LIST. ELSEIF SY-CUCOL < 93. PERFORM TRANSFER_SELECTION. SORT T_USER BY MANDT. PERFORM DISPLAY_LIST. ENDIF. ENDIF.
    * End of line-selection
*& Form DISPLAY_LIST
FORM DISPLAY_LIST.
SY-LSIND = 0.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
LOOP AT T_USER.
WRITE: / SY-VLINE, T_USER-SELECTION AS CHECKBOX, SY-VLINE, T_USER-MANDT, SY-VLINE, T_USER-BNAME, SY-VLINE, T_USER-NAME_FIRST(15), SY-VLINE, T_USER-NAME_LAST(15), SY-VLINE, T_USER-DEPARTMENT, SY-VLINE, T_USER-TEL_NUMBER(20), SY-VLINE. HIDE: T_USER-COUNTER, T_USER-SELECTION.
ENDLOOP.
FORMAT COLOR OFF.
WRITE: /(108) SY-ULINE.
ENDFORM. DISPLAY_LIST
*& Form DISPLAY_MENU
FORM DISPLAY_MENU.
FORMAT COLOR COL_HEADING HOTSPOT. WRITE: (91) SY-ULINE, / SY-VLINE NO-GAP, (4) ICON_SELECT_ALL NO-GAP, Select All, SY-VLINE NO-GAP, (4) ICON_DESELECT_ALL NO-GAP, Deselect All, SY-VLINE NO-GAP, (4) ICON_SHORT_MESSAGE NO-GAP, Send Popup, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Last Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, First Name NO-GAP, SY-VLINE NO-GAP, (4) ICON_SORT_UP NO-GAP, Client NO-GAP, SY-VLINE, /(91) SY-ULINE, /(108) SY-ULINE. FORMAT HOTSPOT OFF. WRITE: / SY-VLINE, , SY-VLINE, Cli, SY-VLINE, User , SY-VLINE, First Name , SY-VLINE, Last Name , SY-VLINE, Department , SY-VLINE, Telephone , SY-VLINE, /(108) SY-ULINE. FORMAT COLOR OFF.
ENDFORM. DISPLAY_MENU
*& Form TRANSFER_SELECTION
FORM TRANSFER_SELECTION.
DO. READ LINE SY-INDEX FIELD VALUE T_USER-SELECTION. IF SY-SUBRC <> 0. EXIT. ENDIF. MODIFY T_USER TRANSPORTING SELECTION WHERE COUNTER = T_USER-COUNTER. ENDDO. CLEAR T_USER.
ENDFORM. TRANSFER_SELECTION
*& Form POPUP_MSG
FORM POPUP_MSG.
DATA: L_MSG LIKE SM04DIC-POPUPMSG VALUE Experimental Message, L_LEN TYPE I, L_RET TYPE C. LOOP AT T_USER WHERE SELECTION = X. PERFORM GET_MESSAGE CHANGING L_MSG L_RET. EXIT. ENDLOOP. IF L_RET = A. User cancelled the message EXIT. ENDIF.
    * Get the message text
L_LEN = STRLEN. LOOP AT T_USER WHERE SELECTION = X. CALL FUNCTION TH_POPUP EXPORTING CLIENT = T_USER-MANDT USER = T_USER-BNAME MESSAGE = L_MSG MESSAGE_LEN = L_LENGTH
    * CUT_BLANKS =
EXCEPTIONS USER_NOT_FOUND = 1 OTHERS = 2. IF SY-SUBRC <> 0. WRITE: User , T_USER-BNAME, not found.. ENDIF. ENDLOOP. IF SY-SUBRC <> 0.
    * Big error! No user has been selected.
MESSAGE ID AT TYPE E NUMBER 315 WITH No user selected!. EXIT. ENDIF.
ENDFORM. POPUP_MSG
*& Form GET_MESSAGE
FORM GET_MESSAGE CHANGING P_L_MSG LIKE SM04DIC-POPUPMSG
P_RETURNCODE TYPE C.
DATA: BEGIN OF FIELDS OCCURS 1. INCLUDE STRUCTURE SVAL.
DATA: END OF FIELDS, RETURNCODE TYPE C.
FIELDS-TABNAME = SM04DIC.
FIELDS-FIELDNAME = POPUPMSG.
FIELDS-FIELDTEXT = Message :. CONCATENATE Msg from SY-UNAME . INTO FIELDS-VALUE SEPARATED BY . APPEND FIELDS.
CALL FUNCTION POPUP_GET_VALUES
EXPORTING POPUP_TITLE = Supply the popup message
IMPORTING RETURNCODE = P_RETURNCODE
TABLES FIELDS = FIELDS.
IF P_RETURNCODE = A.
EXIT.
ELSE.
READ TABLE FIELDS INDEX 1.
P_L_MSG = FIELDS-VALUE.
ENDIF.
ENDFORM. GET_MESSAGE
*End of Program
Regards
Pavan

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again, time after time? (Windows 7 64bit US).

How can I DISABLE the pop up 'Would you like to copy it to Library', preventing this message from bothering for each and every book, again and again , time after time? (Windows 7 64bit US).
I guess this may be a feature request. Adobe may think this is a good message for every new eBook.
I sure would like to decide about that myself.
Thanks in advance if this will be changed.

singmk wrote:
Decided to setup the mail for exchange on my N8 so I could see my work emails. Worked like a charm but after a couple of hours decided I didn't like being that contactable so deleted the mailbox.
Now to the problem, during setup I was forced to enable the phone lock and had to pick a 7 digit alphanumeric code. Fair enough I thought and went ahead. When I removed the mailbox however the lock remained in place with the default auto time of 30 minutes. When I checked in Phone management there is no option to disable this lock so I thought I could at least change the default time to something bigger but when you try, it remains at 30 mins. You also can't disable the auto time as it pops up an error message saying can't unlock phone.
Does anyone know if I'm missing something obvious here or is this something which can't be disabled once it's switched on? I've done a soft reset back to factory settings with no luck and the only other thing I can think of is re installing the firmware which seems a bit extreme.
Would like to hope there is some way to have control over this. Can someone help?
Which firmware your N8 having now? You can check firmware by choosing Call, then type *#0000#.
My N8 works fine on security setting and able to define Phone auto lock period, by choosing Menu>Settings>Phone>Phone management>Security settings>Phone and SIM card>Phone auto lock period>User defined>Lock after(minutes)
You will prompt to enter Lock code each time u define auto lock priod or enable/disable auto lock.
Hope this can help you.
If you find this post helpful, please show your appreciation by clicking the Kudos star at the left. If it provides you the solution, please click on the GREEN Accept as Solution button at below

ITunes fails to download artwork for each and every album!

Hi!
The Get Artwork feature seems to totally fail. Right clicking an album, then Get Artwork, gives error: "Artwork for [band name] - [album] could not be found".
This happens for every album I have, even though all my MP3s are correctly tagged with the Artist name and album.
Any suggestions?

Do you get an error message when you try to download iTunes? If so, what does it say? (Precise text, please.)

Getting error in each and every scenario

Hi,
I am getting Error as "HTTP response contains status code 503 with the description service unavailable" at SXMB_MONI in each every scenario like
FIle to File,
FIle to IDOC and vice versa,
IDOC to JMS and vice versa,
File to JDBC,
HTTP to IDOC,
JMS to JDBC,
RFC to SOAP etc.
Earlier the above scenarios all are working fine.i.e without any Error.
Can any body help me to resolve this problem.
Regards
Sridhar Raju Mahali

hi sridhar..
got design.. -> tools -> transfer from SLD -> import s/w component version...
and import the below 2 components
SAP J2EE ENGINE 6.40 sap.com SAP-JEE 6.40 01200615320200006685
SAP BASIS 6.40 sap.com SAP_BASIS 640 01200615320200005507
if imported, re-import....
hit the fulll cache refresh then ..and restart ur IR ID...
( confirm with ur basis guys, how to go abt)
regards..
vishal

My Digital personna addon is not working in Firefox 7.o....I use fingerprint login for each and every website....plz help.

Hi,
I have finger print reader on my laptop. This reader use Digital personna software to authenticate. I use fingerprint authentication in most of the websites. But unfortunately when I upgraded to Firefox 7.o the extension got disabled. Please help me in fixing this issue.!!!

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Getting Dump error for WD ABAP URL, program CX_WDR_ADAPTER_EXCEPTION======C

Hi SAP WD gurus,
Getting the below bump error while launcing the WD ABAP URL on browser.
Please help to resolve this.
The following error text was processed in system SD1 : An exception occurred that was not caught.
The error occurred on the application server isvsapsrmidev_SD1_01 and in the work process 9 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C0STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Regards,
Vinod
Edited by: Vinod Malagi on Jan 9, 2012 7:11 AM

Hello,
did you get this fixed? We are experiencing the same issue after just doing the EhP5 upgrade in our first system.
Thanks,
Ingrid Funken

Check each and every record during update/delete

Hi,
I have forms 10g I made one tabuler form and want to apply certain restrictions like after two days update or deletes are not allowed how can I check this for each and every record in tabuler form during updation/deletion.
2- If the record does not meet my criteria how can I skip saving/updating record.
Thanks in advance.
Khawar
Message was edited by:
S. Khawar

As you already storing the data for created date/time, it’s quite easy now to check date/time before deleting or updating
Need 2 triggers to write on the specific block.
1)     PRE-INSERT
2)     PRE-DELETE
The Trigger code as follows in both triggers
Declare
     No_Days Number;
Begin
     Select Nvl(Trunc (Sysdate - Created_datetime),0)
     Into No_Days
     From <Table Name>
     Where :<Form Column Name> = <DB Column Name>
If No_Days >= 2 then
Raise Form_Trigger_Failure;
End If;
End;
Cheers
Ayaz

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

Hi Ganeshpandianm,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
http://support.apple.com/kb/TS1371?viewlocale=en_US
"iTunes cannot run because it has detected a problem with your audio configuration"
Cheers,
- Judy

I keep getting exact duplicate songs in playlists and libraries, how can you filter this out when upgrading these lists, or sync to the same device again? And how to do it without going through each and every P'list or Library ?

I have Windows XP-Pro SP3, the latest upgrades of Three media players, iTunes being the default player. I keep getting duplicates in playlists, libraries etc., of the same version of song. Everytime i make a change or renew my media to device or SYNC it wants to add duplicates to the computer disk, lists etc. Can you filter out same copies without having to edit each and every song, which in my case is quite large. For instance if you want to convert all mpeg, or mp4-a files to AAC you will end up with duplicates of each file type. Or you sync to an ipod, the library adds to itself---- including copies of songs already in it, if in a different file version.

Your refer to:
" if you want to convert all mpeg, or mp4-a files to AAC "
This will always duplicate files within iTunes. I need to ask why you're doing this conversion - all formats are compatible with iTunes, and conversion between mp3 and AAC will always involve some loss of quality.

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

To get unicode errors for each and every program

Similar Messages

Maybe you are looking for