To give colours for a certain row in table control in module pool

Hi,
In module pool,,,,,When I am displaying the Table Control......Suppose in some rows personnel no. is there and for the person who has exited from the company should be highlighted with red colour.
Please some code..
thanks..

Hi Jayasree,
I think I had a similar requirement to have a one column on a particular row
available for input where all other rows for that column were not. It took
me a while to figure this out but it was quite simple. I expect it will
work for colour changes too.
In Process Before Output
LOOP AT INTERNAL TABLE INTO WA WITH CONTROL TC
Call Module
END LOOP
In the module program the condition on which the colour change / input
status etc has to be changed using
IF condition = true
LOOP AT SCREEN
IF SCREEN-NAME = column name
Make your colour / input status change
MODIFY SCREEN
ENDIF
ENDLOOP
ENDIF
I hope this helps you.
Please search the forum before adding a new thread.

Similar Messages

Making a field visible for a particular row in table control.

Hi Experts,
I have a scenario where in there are 7 columns in table control wherein last column I have made invisible. Now I got to make that column visible only for the selected row and this column for the rest of the rows should be invisible.
How can I achieve this. Tried a lot playing with table control current line and cols structure but no fruit.
Please help. <removed by moderator>
Thanks,
Edited by: Thomas Zloch on Oct 19, 2010 2:38 PM

Hi All,
Sorry for late response. I was out of station for a while.
I tried a lot after going through the link provided by Robert and also tried what Anmol has suggested but its not working,
The column becomes invisible but it is not becoming visible again for the selected row.
The code I have written is as follows.
process before output.
module status_9000.
module tc_details_change_tc_attr.
loop at   it_test
       into wa_test
       with control tc_details
       cursor tc_details-current_line.
    module tc_details_get_lines.
     module customize. " Module to update table control dynamically
endloop.
module CUSTOMIZE output.
LOOP AT TC_DETAILS-cols INTO cols.
           if cols-screen-name = 'WA_TEST-REMARKS'. " and wa_test-sel = 'X' ).
       IF WA_TEST-SEL = 'X'.
         COLS-SCREEN-ACTIVE = '1'.
         COLS-INVISIBLE = '0'.
         MODIFY TC_DETAILS-COLS FROM COLS INDEX SY-TABIX.
         ELSE.
          COLS-SCREEN-ACTIVE = '0'.
         COLS-INVISIBLE = '1'.
         MODIFY TC_DETAILS-COLS FROM COLS INDEX SY-TABIX.
         ENDIF..
         ENDIF.
          ENDLOOP.
endmodule.
Please help.

Using f4 help for table field in module-pool

Hi All,
I am using a table-control in module pool programing.
Fields are coming from MAKT table.
I am trrying to provide a functinality so that when choose
a material no using f4 help for MAKT-MATNR field
the corresponding value of MAKT-MAKTX should
appear itself in corresponding table-control field.
It's not happening right now.
How I can create that functionality??
Thanx in advance

Hi
Please write the custom F4 Help logic for material number in the block process on value-request. in PAI
process on value-request.
Search Help For UOM
field wa_screen_fields-material module Material_help.

Oracle 10g - To find the corresponding record for a certain row

Hi all,
The scenario is like this - Suppose I've got a table with 100+ columns. For a certain row inside, I need to find its corresponding record which is in the same table. The way how I define "corresponding" here is - these two rows should be identical in all attributes but only different in one column, say "id" (primary key).
So how could I achieve this? What I can think of is to fetch all columns of the first row into some pre-defined variables, then use a cursor to loop the table and match the values of the columns of each row to those variables. But given that we've got 100+ rows in the table, this solution doesn't look practical?
Any advises are greatly appreciated. Thanks.

something to play with as Solomon suggested (use some other string aggregation technique if you're not 11g yet)
you'll have to adjust the column_list accordingly
select 'select ' || column_list ||
       ' from ' || :table_name ||
       ' group by ' || column_list ||
       ' having count(*) > 1' the_sql
from (select listagg(column_name,',') within group (order by column_id) column_list
          from user_tab_cols
         where table_name = :table_name
       )Regards
Etbin
Edited by: Etbin on 25.12.2011 16:53
Sorry, I'd better leave the forum: the title says you're 10g :(
Providing a link for replacing listagg: http://www.sqlsnippets.com/en/topic-11787.html

Updating certain rows of table by external file??

Hello gentlemen,
I need your help.I have a very large table.I need to update certain rows of table every day(around 200 per day)
I would like by using an external file (.csv or .txt) to update certain column on the 200 rows i have in the external file.
Can this be done?Do i need to write down a pl/sql procedure?Please help.I am a newbie to pl/sql but it will save me much time every day if i manage to do this.
Thank you in advance for your help.

I made a first attempt to create the external table from a .txt file.
I used the below:
CREATE TABLE pol_test
(STATUS VARCHAR2(30 CHAR),
ASFAL VARCHAR2(20 CHAR)
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY def_dir1
ACCESS PARAMETERS
(RECORDS DELIMITED BY STRING
FIELDS (STATUS VARCHAR2(30 CHAR),
ASFAL VARCHAR2(20 CHAR)
LOCATION ('C:\Users\t.christopoulos\Desktop\TEST.TXT')
I get the below error :
Error report:
SQL Error: ORA-06564: object DEF_DIR1 does not exist
06564. 00000 - "object %s does not exist"
*Cause: The named object could not be found. Either it does not exist
or you do not have permission to access it.
*Action: Create the object or get permission to access it.
I suppose that it goes to create the directory on the server where i dont have access.I run these commands from my desktop using SQL developer.

How to select perticular row in table control for BDC

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

How to get all the index of "selected rows" in table control?

Hi Gurus,
I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
I know that the event for capturing selected row is in PAI.
I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
TOP INCLUDE
YPES: BEGIN OF Y_ZQID_CHECK,
        IDNUM           TYPE ZQID_CHECK-IDNUM,
        WERKS           TYPE ZQID_CHECK-WERKS,
        MATNR           TYPE ZQID_CHECK-MATNR,
        LICHA           TYPE ZQID_CHECK-LICHA,
        LIFNR           TYPE ZQID_CHECK-LIFNR,
        ECOA_S          TYPE ZQID_CHECK-ECOA_S,
        ID_STAT         TYPE ZQID_CHECK-ID_STAT,
        ID_DATE         TYPE ZQID_CHECK-ID_DATE,
        FLAG_MAILCOA(1) TYPE C,
        MARK(1)         TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
       END   OF Y_ZQID_CHECK.
DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
PAI
PROCESS AFTER INPUT.
* MODULE USER_COMMAND_9004.
LOOP AT T_ZQIDCHECK_DISCH.
MODULE READ_TC_DISCH .
ENDLOOP.
module READ_TC_DISCH input.
DATA: W_LINE_SEL TYPE SY-STEPL,
              W_TABIX    LIKE SY-TABIX.
GET CURSOR LINE W_LINE_SEL.
W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
If I am selecting single row, I can properly get the selected index via debug.
BUG:
When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
Please see the screenshot.
[url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
Helpful inputs will be appreciated.
Thanks.
Jaime
Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PM

Hi,
Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
Flowlogic.
LOOP WITH CONTROL TC_01.
     Module Get_Marked.
ENDLOOP.
Module Pool
Module Get_Marked.
read the data from the internal table where mark = 'X'.
this should give you only selected records.
Endmodule.
Kindly check the tablecontrol property.
Regards,
Ranjith Nambiar

Unable to delete a row in table control

Hi,
I'm unable to delete a row in table control.
I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
Please help.
Regards,
Manasee
Message was edited by: Manasee Chandorkar

hi,
kindly chk this.
PROCESS BEFORE OUTPUT.
MODULE status_9010.
LOOP WITH CONTROL tab_control.
MODULE move_data_to_table.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL tab_control.
MODULE move_data_from_table.
ENDLOOP.
*& Module move_data_to_table OUTPUT
This is to move the data from the internal table to the table control
MODULE move_data_to_table OUTPUT.
This is to move the data from the internal table to the table control
zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
READ TABLE int_factor INDEX tab_control-current_line.
IF sy-subrc = 0.
zmpets_mode-modecode = int_factor-modecode.
zmpets_range-rangeid = int_factor-rangeid.
zmpets_servfacto-factor = int_factor-factor.
ENDIF.
ENDMODULE. " move_data_to_table OUTPUT
*& Module move_data_from_table INPUT
Date is moved from the table control to the Internal Table
MODULE move_data_from_table INPUT.
To move the data from the table control to internal table 'INT_FACTOR'.
int_factor-modecode = zmpets_mode-modecode.
int_factor-rangeid = zmpets_range-rangeid.
int_factor-factor = zmpets_servfacto-factor.
int_factor-chk = line.
*here if the data is there, it will modify
MODIFY int_factor INDEX tab_control-current_line.
IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
APPEND int_factor.
CLEAR int_factor.
ENDIF.
ENDMODULE. " move_data_from_table INPUT
*delete a line from table control
MODULE user_command_9010 INPUT.
CASE sy-ucomm.
When an entry is deleted, and the entry is removed from the table
control.
    WHEN 'DELETE'.
      PERFORM f_del_frm_tab_cntrl.
ENDCASE.
ENDMODULE.
FORM f_del_frm_tab_cntrl .
LOOP AT int_factor WHERE chk = 'X'.
    DELETE int_factor WHERE chk = 'X' .
    CONTINUE.
ENDLOOP.
CLEAR int_factor.
ENDFORM.
for any clarifiaction pls mail me.
pls reward points, if this helped u.
regards,
anversha.
[email protected]
Message was edited by: Anversha s

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

Bdc for ip01, data upload in table control

I was working on a bdc for ip01 . there is a table control - whose 5 rows are visible and I need to fill data upto 6 row . 6th row get filled by scrolling . will scrolling get captured in recording . whether this is possible or not sir . If yes then how?
Sir please help me.
With regards,

Hi
Scrolling does not get recorded while recording. You can achieve it by having ok_code to p+ or p++.
Refer the following link for detailed description.
http://wiki.sdn.sap.com/wiki/display/ABAP/BatchInputFAQ#BatchInputFAQ-Howtoscrollatablecontrol%3F
Hope this helps you.
Regards
Vinodh

BDC : to select different rows in table control

Hi,
I have to fill many rows in table control and want to select different row one by one in increasing order which rows are filled in BDC.
Can anybody suggest me with coding...
thanks
naresh

Hi ,
I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
Program Name        : ZFV11_NEW
Program Description : To Upload Condition Records-FV11
Author              : Jagadish
Start Date          : 11/06/2007
REPORT zfv11
       NO STANDARD PAGE HEADING LINE-SIZE 255.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
TABLES : t100.
DATA: BEGIN OF record OCCURS 0,
data element: KSCHA
        kschl(004),               "Condition Type
data element: SELKZ_LIST
      selkz(001),
data element: WERKS_D
        werks(004),               "Plant
data element: ELIFN
        lifnr(010),               "Vendor
data element: MATNR
        matnr(018),               "Material No.
data element: KBETR_KOND
        kbetr(016),               "Amount
data element: KODATAB
        datab(010),               "Condition Validity Date from
data element: KODATBI
        datbi(010),               "Condition Validity To
data element: MWSKZ
        mwsk1(002),
      END OF record.
DATA : BEGIN OF it_new OCCURS 0,                    " Internal Table for Header Data
       kschl(004),
       werks(004),
       lifnr(010),
       END OF it_new.
DATA : BEGIN OF it_item OCCURS 0,                  " Internal table for Item Data
      werks(004),
      lifnr(010),
      matnr(018),
      kbetr(016),
      datab(010),
      datbi(010),
      mwsk1(002),
      END OF it_item.
DATA : cnt(2) TYPE n,
       fld(25) TYPE c.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA : n TYPE n.
DATA:
     BEGIN OF t_data OCCURS 0,
           data TYPE string,
     END   OF t_data.
DATA:BEGIN OF it_mess OCCURS 0,
msgtyp(5),
   lms(200),
   msgv1(50),
    END OF it_mess.
DATA : p_mode    TYPE c.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE,
   it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
DATA : l_mstring(150).
DATA : BEGIN OF bdcdata OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA: END OF bdcdata.
PARAMETERS : p_file1 LIKE rlgrap-filename.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
LOOP AT it_new.
    REFRESH bdcdata.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV13A-KSCHL'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RV13A-KSCHL'
                                  it_new-kschl.
    PERFORM bdc_dynpro      USING 'SAPLV14A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV130-SELKZ(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=WEIT'.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KONP-KBETR(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'KOMG-WERKS'
                                  it_new-werks.
    PERFORM bdc_field       USING 'KOMG-LIFNR'
                                  it_new-lifnr.
DATA: "X(5) TYPE N,
         N(5) TYPE N.
   N = 0.
   LOOP AT it_item.
     N = N + 1.
   ENDLOOP.
   "X = 1.
   CNT = 1.
   DO N TIMES.
     IF CNT > 19.
       perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
       perform bdc_field       using 'BDC_OKCODE' '=P+'.
       PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
       CNT = 1.
     ENDIF.
    cnt = 1.
    LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
      CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-matnr.
      CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
      PERFORM bdc_field USING fld it_item-kbetr.
      CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-datab.
      CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-datbi.
      CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
      PERFORM bdc_field USING fld it_item-mwsk1.
      cnt = cnt + 1.
      if cnt = 20.
        perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
        perform bdc_field       using 'BDC_OKCODE' '=P+'.
        PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
        CNT = 1.
       endif.
CLEAR it_item.
    ENDLOOP.
   ENDDO.
    PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'KONP-MWSK1(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.
    CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
                                        UPDATE 'S'
                                       MESSAGES INTO it_msgtab.
    CLEAR bdcdata[].
    PERFORM error.
ENDLOOP.
       Start new screen   -Subroutine     for screen s                                      *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "BDC_DYNPRO
       Insert field        -Subroutine   for field s                                         *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "BDC_FIELD
*&      Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
*&      Form data_upload
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
   EXPORTING
    I_FIELD_SEPERATOR        =
       i_line_header            = 'X'
       i_tab_raw_data           = it_raw
       i_filename               = p_file1
     TABLES
       i_tab_converted_data     = record
    EXCEPTIONS
       conversion_failed        = 1
       OTHERS                   = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " data_upload
*&      Form error
FORM error .
LOOP AT it_msgtab.
    IF it_msgtab-msgtyp = 'E'.
      SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
                                AND   arbgb = it_msgtab-msgid
                                AND   msgnr = it_msgtab-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
          REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
          REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
          REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
          REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = it_msgtab-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = it_msgtab-msgv1.
        APPEND it_mess.
       WRITE: / it_msgtab-msgtyp, l_mstring(150).
      ELSE.
       WRITE: / it_msgtab.
        it_mess-msgtyp = it_msgtab-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = it_msgtab-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                    " error
*&      Form table_Control
FORM table_control .
SORT record BY lifnr matnr.
LOOP AT record.
    ON CHANGE OF record-lifnr.
      MOVE-CORRESPONDING record TO it_new.
      APPEND it_new.
    ENDON.
    MOVE-CORRESPONDING record TO it_item.
    APPEND it_item.
ENDLOOP.
ENDFORM.                    " table_Control
Reward if useful
Thanks
Jagadeesh.G

Adding one additional row to table control of VA01

HI all,
I am working on free goods N:N senario which is not supported by sap standard.
so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
plz quote solutions....
thanks..
Kundal.

The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
Are you adding condition records, or adding free materials to VBAP? If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
Not sure what you mean by not supported by SAP standard; SAP does support free goods, via config!
Edited by: BreakPoint on Mar 14, 2011 4:11 PM

Enable/Disable Rows In table Control

I m getting material number for particular material doc. if i get N rows in output i want to disable all other rows of table control.
Moderator message: please search for previous solutions to similar problems before asking.
Edited by: Thomas Zloch on Nov 20, 2010 7:24 PM

Hi,
In PBO, Loop at your table control lines, create a module inside it and use
LOOP AT SCREEN.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDLOOP.
Regards,
Senthil

Selecting rows in table control

Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.

By,
Using the Get cursor syntax you can achive the Selected row in Table control.
DATA : selrow TYPE i,
selindex TYPE i .
* getting the cursor line in Table Control for selected row
GET CURSOR FIELD selfield LINE selrow.
selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu

How to select all the rows of table control in BDC

Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..

Sorry about that lakshmi. Here is my code.
    PERFORM dynpro USING : 'X'   'SAPMMCP6'          '0105',
                           ' '   'RMCP2-MATNR'       t_matnr,
                           ' '   'RMCP2-WERKS'       t_werks,
                           ' '   'BDC_OKCODE'        '=AKTV'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=MRKE'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=GRAO

To give colours for a certain row in table control in module pool

Similar Messages

Maybe you are looking for