To givingupusa - a simple Encore Tutorial

To givingupusa - a simple Encore Tutorial
I have CS5, so you need to go slowly to be sure you find the correct commands for your
version of Premiere Pro and Encore
This is for DVD only, since I don't do BluRay
Verify these steps with the book or PDF or help file!
Go past this tutorial exercise for links to online Tutorials
Even if you have a later version, this is a good book to learn Encore
http://www.amazon.com/Focal-Easy-Guide-Adobe-Encore/dp/0240520041/ref=sr_1_1?
This note is written specifically for "givingupusa" who can't get Dynamic Link to
ie=UTF8&s=books&qid=1277266925
work... but, of course, anyone who is learning may find this to be helpful
Do your editing in Premiere Pro... do NOT use Dynamic Link (this exercise is to be sure
that you may create a file that Encore will use, and that Encore will, in fact, open
properly and actually use that file)
If you are editing HD, read this
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
This is just a test, so you don't need anything fancy or long in Premiere... a file (or
two?) totalling 10 minutes to as much as half an hour is all you need (keep this test
short, so you find out "quickly" if things work, or not)
When you are done editing, make sure you have selected to export the entire timeline,
then export to either DV NTSC (or Pal) Widescreen or DV NTSC (or Pal) if you are
editing 4:3 video
File-Export-Media... then, on the lower left, select Source Range of Entire Sequence
Upper right select Format Microsoft AVI then just below that Preset select NTSC DV
Widescreen (or PAL DV Widescreen) for widescreen material (if you have been editing
HiDef source) or NTSC DV (or PAL DV) if you have been editing SD material that is in
the 4:3 pixel ratio
Output Name will show a default of Sequence 01.avi which you double click to change to
a file name (and location) of your choice
Export Video and Export Audio are both checked by default... do not change that
Make NOTE of what it says after Output and Source... for this test, going from HD Flip
to DV AVI, mine says
Output 720x480, 29.97 [fps], Lower, Quality 100 - 48000 Hz, Stereo, 16 bit
Bottom right click Export... a window will pop up with a title of "Encoding Sequence
01" with a progress bar in the window... exit from Premiere when done
The result will be a FileName.AVI file (of course, FileName is YOUR actual file name
that you selected) which has video and sound all in one file
Find the Encore program icon that was created when you installed Premiere Pro and
Encore... double click the icon to start Encore... or, if you can't find a program
icon, click START - All Programs and then find Encore in the appropriate Adobe program
group
When Encore starts, select New Project and give it a name and location, and be sure the
DVD option is checked
Make NOTE of the Transcode Settings on this New Project Screen (NOTE that if you exit
from this project and come back to it later, you would select the project name you just
created, instead of New Project)
If your AVI file is large enough that you are going to do a dual layer DVD, Right Click
the Encore icon and select Run as Administrator (or you WILL have an Encore error!)
Make sure you are in the PROJECT panel (look on the upper left) and then File — Import
As - Timeline, and select your AVI File
In the lower right Library panel, use the Set: General, and Drag an appropriate Blank
Menu or Blank Menu WIDE to the Project Panel
In the Project panel Right Click the Menu and set as First Play
In the Flowchart panel in the center of the screen, Drag the AVI and drop it on the
Menu
While in the Properties panel on the upper right, click the AVI file once to set the
focus, then set AVI End Action to Return to Last Menu
Back in the center, with the menu selected, you will a wide button with text (mine
always defaults to Party Highlight 1 for some reason) which is the link from the menu
to play the video
Right Click and Rename (if you wish, figure out on your own how to move this command
button to a different location)
On the top left, select the Build panel
Click the Check Project and then Start in the popup window, and NOTE and fix any errors
3 main Output options are DVD Disc (to go direct to a DVD) or DVD Folder to create the
DVD file structure on your hard disk or DVD Image to create an ISO for later burning to
a DVD
I normally build an ISO and use the FREE Imgburn http://www.imgburn.com/index.php? to have more control over the burning settings (burn at the slowest speed
act=download
possible for a better burn) use Verbatim or Tayio Yuden discs (Change the ISO’s Name
via the Browse function)
For this test, I will use DVD Folder and create the DVD folder on my hard drive so I
may then play the DVD from that folder without burning a disc... only do this if you
have a DVD player installed... otherwise, burn to DVD to test at a TV
Even Empty the DVD-ROM says it uses 526k – for the "usual" overhead
Last step is to actually build the ISO File or Folder... I used H: for the folder (you
will, of course, use a drive letter appropriate to your computer setup)
After Encore finished, I used WinExplorer to find the VIDEO_TS folder, which (for my
short test) contained
VIDEO_TS.BUP
VIDEO_TS.IFO
VIDEO_TS.VOB
VTS_01_0.BUP
VTS_01_0.IFO
VTS_01_0.VOB
VTS_01_1.VOB
When I double clicked on VIDEO_TS.VOB my DVD player was activated, and the menu came up
on screen, where I could click the name I gave my movie... and the movie began to play
If you do not have this result... report back with all the NOTES you made and with any
error messages
If you are able to create a DVD this way... give up on Dynamic Link and use this
process
Now, some general information about Premiere Pro and Encore
This message has a really good graphic about requirements
CS5 Requirements http://forums.adobe.com/thread/810750?tstart=0
CS5 Benchmark http://ppbm5.com/ and CS4 Benchmark http://ppbm4.com/
If Encore will not burn a DVD for any reason, write an ISO image to hard drive and then
use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or
ISO to disc
(send the author a PayPal donation if you like his program)
Updates
All Adobe updates start here and select product, install in number order, updates are
not cumulative http://www.adobe.com/downloads/updates/
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5
Encore
http://forums.adobe.com/community/encore
http://forums.adobe.com/community/encore/encore_faq
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
NEVER use Overrides http://forums.adobe.com/thread/860691?tstart=0
Missing Library Files http://forums.adobe.com/thread/398764?tstart=0
Plus http://forums.adobe.com/thread/718596?tstart=0
Quicktime MSVCR71.dll error http://forums.adobe.com/thread/701789?tstart=0
Encore space recovery http://forums.adobe.com/thread/646383?tstart=0
Encore is 32bit http://www.adobe.com/products/premiere/encore/
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator...
-pdf-and-html.html
tstart=0
which fixes several "odd" problems
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore "No Drive" Error http://forums.adobe.com/thread/569230?tstart=0
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 here has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941?tstart=0
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
Use Taiyo Yuden single layer or Verbatim dual layer
Or Falcon Pro for inkjet printable dual layer
http://www.discmakers.com/shop/ItemDetails.aspx?ItemID=DVD034-00010
Premiere Import Formats
http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568
Premiere Export Formats
-8000.html
http://help.adobe.com/en_US/mediaencoder/cs/using/WS725e431141e7ba651e63e3d1267818bc51
CS5 Encore Files & Formats http://help.adobe.com/en_US/encore/cs/using/WS5C9E1CF8-
- not sure if CS3 and/or CS4 read all of the CS5 files/formats, or only "some" of them
- but if you are having Encore problems, make sure your files are "legal" for DVD or
-8000.html
B5BC-436f-89D3-61DDC02A2C47a.html
BluRay
Link to DVD Demystified FAQ http://forums.adobe.com/thread/544206?tstart=0
Wav -vs- Ac3 in motion menu http://forums.adobe.com/thread/704886?tstart=0
Tutorials
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
http://forums.adobe.com/thread/845731?tstart=0
-and http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834?tstart=0
A Video Primer for Premiere http://forums.adobe.com/thread/498251?tstart=0
Premiere Tutorials http://forums.adobe.com/thread/424009
CS5 Premiere Pro Tutorials http://forums.adobe.com/message/2738611
And
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And
http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
CS5 Tutorials http://bellunevideo.com/tutlist.php
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-
Photo Scaling for Video http://forums.adobe.com/thread/450798?tstart=0
-A12E-4ED0348C3FDBa.html
263E77B445B9.html

Great resource John T.
Thanks,
Hunt

Similar Messages

Simple introduction/tutorial on how to make Cocoa-Applescript Applets?

I'm looking for a simple tutorial on how to make Cocoa-Applescript Applets. I'm pretty new to Applescript, but fairly good at it, and I was wondering how Cocoa-Applescript Applets worked. I was curious as I've been wondering if it was possible to somehow display images in Applescript, and it apparently is the only/easiest way. My problem is that I haven't been able to find any tutorials on using it, so I was wondering if you guys could point me in the right direction, that'd be great!
thanks in advance

The main difference is with how the Cocoa APIs are used - in addition to the AppleScript and AppleScriptObjC release notes, there are some examples and resources at Mac OS X Automation. Note that in Yosemite, AppleScriptObjC is available to all scripts, not just applets and libraries.

I need a Adobe Edge simple machine tutorial!

Hello, I'm looking for a tutorial that will help me make one of the fallowing machinesin adobe edge; 1. A lever is a stiff bar that rests on a support called a fulcrum which lifts or moves loads. There are three classes of levers. 2. A pulley is a simple machine that uses grooved wheels and a rope to raise, lower or move a load. 3. A wedge is an object with at least one slanting side ending in a sharp edge, which cuts material apart. 4. A wheel with a rod, called an axle, through its center lifts or moves loads. 5. An inclined plane is a slanting surface connecting a lower level to a higher level. 6. A screw is an inclined plane wrapped around a pole which holds things together or lifts materials.
I hope someone can help!

Hi,
Thanks for your post.
Please check the following articles
Edge Animate CC tutorials | Learn how to use Edge Animate CC
Learn Edge Animate CC | Adobe TV
Regards,
Devendra

Custom StyledEditorKit: simple example/tutorial?

I'm trying to write a simple EditorKit to color specific parts of a text (and later different fonts). I extended StyledEditorKit for this, but can't get any text to be colored in my JTextPane. The Java Tutorial and also what I've found in this forum and google didn't show how to start writing a simple EditorKit.

Well, I have a simple example that shows how to start. Of course it's brute force colorizing always the complete text and only works for well-formed XML, but it's a working example of how to write your own EditorKit. It shows that only a few things have to be done.
public class XMLEditorKit extends StyledEditorKit {
     * Constructor.
    public XMLEditorKit() {
        super();
    }//XMLEditorKit()
     * Overwrites super.
    public String getContentType() {
        return "text/xml";
    }//getContentType()
     * Overwrites super.
    public Document createDefaultDocument() {
        return new XMLDocument();
    }//createDefaultDocument()
}//XMLEditorKit
class XMLDocument extends DefaultStyledDocument {
    /** Attributes for XML element tag. */
    private MutableAttributeSet tag = null;
    /** Attributes for element value. */
    private MutableAttributeSet elementValue = null;
     * Constructor.
    public XMLDocument() {
        tag = new SimpleAttributeSet();
        StyleConstants.setForeground(tag, Color.blue);
        elementValue = new SimpleAttributeSet();
        StyleConstants.setForeground(elementValue, Color.black);
    }//XMLDocument()
     * Override AbstractDocument.
    public void insertString(int offset, String str, AttributeSet a) throws BadLocationException {
        super.insertString(offset, str, a);
        colorize();
    }//insertString()
     * Override AbstractDocument.
    public void remove(int offset, int length) throws BadLocationException {
        super.remove(offset, length);
        colorize();
    }//remove()
     * Called when document content changed to revalidate syntax highlightning.
     * Only works correctly for well-formed XML.
    private void colorize() throws BadLocationException {
        String text = getText(0, getLength());
        int startIndex = 0;
        int endIndex = text.length() + 1;
        int openIndex = 0;
        int closeIndex = 0;
        boolean outOfTag = true;
        while (startIndex <= endIndex) {
            openIndex = text.indexOf('<', startIndex); //next '<'
            closeIndex = text.indexOf('>', startIndex); //next '>'
            if (outOfTag) {
                if (openIndex >= 0) {
                    setCharacterAttributes(startIndex, openIndex - startIndex, elementValue, false);
                    startIndex = openIndex;
                    outOfTag = false;
                } else {
                    setCharacterAttributes(startIndex, endIndex + 1, elementValue, false);
                    break;
            } else { //withinTag
                if (closeIndex >= 0) {
                    setCharacterAttributes(startIndex, closeIndex - startIndex + 1, tag, false);
                    startIndex = closeIndex + 1;
                    outOfTag = true;
                } else {
                    setCharacterAttributes(startIndex, endIndex + 1, tag, false);
                    break;
            }//next occurence
    }//colorize()
}//XMLDocumentSo, to start write a custom EditorKit,
1. extend StyledEditorKit (or DefaultEditorKit, if you like)
2. create a document class extending DefaultStyledDocument
3. overwrite insertString()/remove() in your document class to implement your custom text styling.

Problem with simple script tutorial

In comparing and trying to replicate visibility functionality via scripting, I downloaded ChangingVisualObjectProperties.pdf to work on while going through the Scripting Basics PDF from Adobe. However, what should be a simple task has proved vexing.
In a word, I can't get a button to change the visibility of a textfield object. I even went to the extreme of setting my file up to be identical in structure and naming convention to the tutorial file. Next, I did screen grabs of all the important property settings for the tutorial file and replicated that in my file. And finally, copied and pasted the actual bit of JS from the tutorial to my example. All to no avail.
Attached are two files. The first is the sample script tutorial from Adobe's site entitled ChangingVisualObjectProperties.pdf. I've included it simply to make it easy for anyone who wants to compare the tutorial to my sample file. The button in question is CheckBox7.
My file is called MyChangingVisProps.pdf and contains only two objects, CheckBox7 and TextField.
If someone could tell me what I'm missing, I will be very grateful!
Graham

Well, I just found the answer in another post.... File-> Save As and choose Dynamic XML Form!
Is there some reason this doesn't take effect when setting options in the Properties dialog?? Talk about a GOTCHA moment!
Graham

Simple, Easy Tutorial/Guide on Transcoding Video Clips into DVD-Video

I have purchased the combo of Photoshop Elements 9 and Premier Elements 9. I am new to these programs. I printed the entire 300 + pages of the Premier Elements 9 user guide off of the adobe website. I am totally overwhelmed by all the features and have given up on creating a project, fearing that the program is too complex to attempt.
If I tell you what I want to do on my project, is it possible to distill all that 300 + pages onto just the essentials of what I need to do?
If there is a simplied tutorial in this forum, perhaps you could direct me to it.
I have various video clips on my hard drive and simply want to encode them into the DVD-Video format and then burn them into a DVD-R so that I can watch through my DVD player.
I would like to create a menu and submenu. Also, creating buttons with thumbnails and labeling each thumbnail with text. I would also like to create a backgrounds for the menu and submenu and the ability to extend the duration of the background image or video. I also would like to create chapters within the submenu.
I'd really appreciate if you could help in this matter. I'd really like to be able to use my new Adobe program.
Thank you in advance for your help. I'll check back to this thread on Tuesday to see if I received any responses.
abbreviation

Hi Steve,
I went to your website looking for the Basic Training Tutorial for Premier Elements 9 and didn't see it. Do you have it for Version 9?
Thank you
abbreviation

"Play" on remote vs. "Enter" - Simple Encore Menu Question

Hi All,
I haven't been able to find a good answer to this question as of yet, so I am hoping someone has a clear answer! I am creating one of the simplest menus possible for my project. It is composed of a screen capture from my timeline as the background image and a text button which is the name of the short film and acts as the "Play" button. My project is only one timeline, so nothing complicated. I am able to make the video play from the menu when I use the remote and physically push the "enter" button, but I would like it to play whether I push the "enter" button OR the physical "play" button on the remote. I can't understand why pushing play on the remote wouldn't count as using the button?
Thank you for your time, and if there is any solution or work around, this would be great! Some of the people who watch my videos don't understand the difference between "enter" and "play" and then the whole thing feels much less professional.
Thank you!

I'm having this same issue.
I have a single menu with one item that is going to play one timeline of video.
I'd like to have it set up where the user presses play or enter and the video plays.
I'm not able to do that. I haven't enabled any overrides. Would appreciate any help.
Thanks so much.
Victor

Posted Simple Flex General Tutorial on my Blog

I posted a simple Flex tutorial on my blog:
http://www.chikaradev.com/blog/?p=168

Much of my blog got wiped out.
The first part of the Flex tutorial is here:
http://www.chikaradev.com/blog/?p=229

Revised and Updated Tutorial List

Here are some Premiere Pro and Encore documents and Tutorials... A mix of old (back to CS5) and new for CC (even for the old ones, most of the basics are the same)
There is a bit of overlap, since one discussion will often branch off to more discussions, but after you have read something once, you should be able to quickly skip it when a link turns up in another discussion
First, some information on project and computer setup
For CS5 and later, the easy way to insure that your video and your project match
-See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
-and a video http://tv.adobe.com/watch/digital-video-cs5/drag-to-new-sequence-function-in-premiere-pro/
-And a FAQ on sequence setting http://forums.adobe.com/message/3804341
When your project sequence is correct, you will not see a red line over your timeline at first import, before you do anything to the video
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video
What CUDA does http://blogs.adobe.com/premiereprotraining/2011/02/cuda-mercury-playback-engine-and-adobe- premiere-pro.html
If your nVidia card has at least 1Gig of video ram, use the nVidia HACK http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file
-or simply rename or move the file, according to some messages
-and the Mac version at http://www.vidmuze.com/how-to-enable-gpu-cuda-in-adobe-cs6-for-mac/
Buy CS6 standalone programs or suites... Premiere Pro is on 2nd page
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
Download CS6 here if you have a serial number but lost your media http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
General Download Portal https://helpx.adobe.com/download-install.html (downloads back to CS3)
CS6 Trial Downloads http://forums.adobe.com/message/5649304 and more information http://forums.adobe.com/thread/1315644
If you have problems with the Cloud (downloads, updates, etc)
-http://forums.adobe.com/community/creative_cloud for Cloud problems/discussions
-http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
When RE-installing, run the cleaner after UN-installing http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
MANY hardware articles http://ppbm7.com/index.php/tweakers-page
Glossary of Video Terms http://www.manifest-tech.com/links/video_terms.htm
Official User guides and some books
CS5-to-CS6 User guides as PDF files, and PProCC Help & Support as HTML pages
http://blogs.adobe.com/adobecustomersuccess/2011/05/14/help-support-pages-for-creative-sui te-applications/
Open PDF as Help http://helpx.adobe.com/x-productkb/global/offline-help.html
The Premiere Pro FAQ http://forums.adobe.com/community/premiere/faq_list
Links to some books http://forums.adobe.com/message/3234794
Another book http://www.amazon.com/Editors-Guide-Adobe-Premiere-Pro/dp/0321773012
Now, links to PPro tutorials... some written, some video to watch
Tutorials per Steven L. Gotz http://library.creativecow.net/tutorials/adobepremierepro
http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
-and more links from Kevin http://forums.adobe.com/message/4714153
Todd Kopriva's links http://forums.adobe.com/thread/845731 and Todd's FAQ http://forums.adobe.com/message/3804423
More tutorials for PPro http://helpx.adobe.com/creative-cloud/learn/start/premiere.html and http://helpx.adobe.com/premiere-pro/topics.html
Several forum discussions
-A "crash course" http://forums.adobe.com/thread/761834
-Tutorials aimed at nVidia MPE http://forums.adobe.com/message/2738611
-Surround Sound http://forums.adobe.com/thread/517372
-A video on multi-camera editing http://vimeo.com/38573242
Adding Graphics Effects Video https://www.youtube.com/watch?v=KL9tfIvxYMw
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
-and examples of video sizes for different screens, VCD to 4K resolutions http://forums.adobe.com/thread/1120039
HiDef to a DVD (only about 20 minutes, requires BluRay drive to play back) http://forums.adobe.com/thread/1347988 is for Premiere Elements, but the process in Encore is similar to create a DVD with "about" 20 minutes of HiDef BluRay content... which will NOT play back on a DVD, only a BluRay player
Other sites
Long time forum contributor http://www.stevengotz.com/ has GREAT information
Premiere Pro at Creative Cow
-http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
-and more at CCow http://library.creativecow.net/articles/devis_andrew/
-and http://library.creativecow.net/series/Premiere-Pro-Basics-CS6--above-with-Andrew-Devis
VidMuze for After Effects & PPro & Encore http://forums.adobe.com/thread/913334
Bellune Video http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Category:Resources
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
DVXUser forum Tutorials http://www.dvxuser.com/V6/forumdisplay.php?21-Premiere
-and http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Lynda.com Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Using Prelude on Adobe TV http://forums.adobe.com/thread/1131172
Resources for film makers http://www.filmbay.com
Now, learning Encore
Encore CS4, but most of the information also works for later versions http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Building a project http://forums.adobe.com/thread/1135941
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Region Free Authorings http://forums.adobe.com/thread/895223
Dynamic Link Problems... and a possible fix in http://forums.adobe.com/thread/1325281
-If DL still does not work for you, simply export from PPro (or After Effects) as MPEG2-DVD and import the 2 files (video and audio) into Encore
For Windows, create a folder or ISO and use Imgburn to write to DVD or BluRay
-Imgburn has more options to control the burn process http://forums.adobe.com/thread/1322583
Using Premiere Pro CC and Encore CS6
-An Adobe FAQ FAQ: Encore CS6 not installed with Creative Cloud
-Using Premiere Pro CC & Encore CS6 | Creative Cloud User
-CS6 is the final Encore, see #8 here for why http://forums.adobe.com/thread/1337952?tstart=0
I do NOT use these, so have NO idea if they will do what you need
Encore alternative http://www.sonycreativesoftware.com/dvdastudio
-or http://www.sonycreativesoftware.com/dvdarchitectpro
-or http://www.deskshare.com/dvd-authoring-burning-software.aspx
With CC 2014, you may need to see the picture in reply 3 - Is encore included in premiere cc 2014?
Updated for CC 2014 Installing Premiere CC & Encore CS6 « DAV's TechTable
Updated for CC 2014 More on Installing PPro/Encore CS6 http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
-And even more on installing CS6 using the Cloud http://forums.adobe.com/thread/1424117?tstart=0
-Encore library Encore Help | Download full library content/functional content
-and if you have problems http://forums.adobe.com/thread/1448716?tstart=0
-be sure to follow ALL instructions, including ALL of the download instructions
-that are contained in the site link INSIDE the link above, or you will not get
-ADDED 8-1-2014 link to ONE functional content download
Encore Help | Download full library content/functional content
You will then have (for Windows)
C:\Program Files\Adobe\Adobe Encore CS6\Library
C:\Program Files\Adobe\Adobe Encore CS6\Library\Corporate
C:\Program Files\Adobe\Adobe Encore CS6\Library\Education
...and so on for all of the folders
Please NOTE that you do not NEED to uninstall Premiere Pro CS6 (as indicated in some discussions) unless you have a space problem... CS6 programs will sit quietly on your hard drive while you use CC programs... and if you ever have a problem with Encore CS6 activation, you will only have to reinstall Premiere Pro CS6 to reactivate Encore CS6... and some people have reported problems with trying to uninstall only Premiere Pro CS6 while keeping Encore CS6 active
If Encore via the Cloud asks for serial number http://forums.adobe.com/thread/1413634?tstart=0
-and more on a fix for Encore http://forums.adobe.com/thread/1421765?tstart=0 in reply #7
How to use Encore CS6 with Premiere Pro CC (NO Dynamic Link)
http://tv.adobe.com/watch/davtechtable/using-premiere-pro-cc-encore-cs6-for-bluray-dvd-and -interactive-video-for-ipadatv-and-mobile-hd/

I don't know what happend but archlinux.puzzle.ch seems to be pretty slow these days. While I got ~ 2.4MB/s before, now I get about 150KB/s. I'm sitting in ZH-city and my router is connected to Cablecom.
BTW: Has archlinux.worldweb2000.com something to do with puzzle.ch? pacman connects there everytime I sync my packages..
# pacman.conf
[options]
SyncFirst = pacman
HoldPkg = pacman glibc
IgnorePkg = dbus dbus-glib hal hal-info abiword
IgnorePkg = rxvt-unicode libtorrent aspell vlc inkscape
[core]
Server = ftp://archlinux.puzzle.ch/core/os/i686
Include = /etc/pacman.d/mirrorlist
[extra]
Server = ftp://archlinux.puzzle.ch/extra/os/i686
Include = /etc/pacman.d/mirrorlist
[community]
Server = ftp://archlinux.puzzle.ch/community/os/i686
Include = /etc/pacman.d/mirrorlist
[unstable]
Server = ftp://archlinux.puzzle.ch/unstable/os/i686
Include = /etc/pacman.d/mirrorlist

Installing Encore after I have installed Premiere CC

OK - it's simple! I want to burn a DVD from premiere, and so I want to download Encore CS6. There are simple tutorials for how to do this and they all say the following:
Open Creative Cloud
Click on Your Apps
Under Premiere, click on "more information"
...and then a few more steps to download encore
However... I have already downloaded premiere CC, and so the "more information" link is not there. Instead I have an option to "view tutorials". How can I download Encore CS6 from here so I can make a DVD for my parents? I have the project all ready for exporting.
Waiting with baited breath, and hoping to be able to thank someone soon..

This is for Indesign, but how to install CS6 programs using the Cloud
-http://forums.adobe.com/thread/1241977?tstart=0
Also go to page #5 in the The PPro/Encore tutorial http://forums.adobe.com/message/2276578 for more information

Pls help - Film is too red on DVD by Encore CS5.1

Hello,
Please i need some help asap. I dont know what i am doing wrong, but i just used Encore CS5.1 to burn my new film on DVD and it the color has nothing to do with the original.
My DVD player is showing me a very red film. I am using the same film on youtube and it look fine, exactely how it should be.
I am very new to editing and this is the second time Encore is giving the red-ish look to my film.
Please help asap.
Also, could you please point me to a good and simple tutorial about using Encore for DVD.
Many thanks.

First, provide the DETAILS about what you are doing... what are your source files and what are your Encore settings, for a start
Post screen shots of your Encore settings so people may see what you are doing
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Here Tutorials
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
-and http://forums.adobe.com/message/3234794
Encore http://tv.adobe.com/show/learn-encore-cs4/
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorials http://forums.adobe.com/thread/424009
CS5 Premiere Pro Tutorials http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
CS5 Tutorials http://bellunevideo.com/tutlist.php
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large = Crash http://forums.adobe.com/thread/879967
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372

Unhappy With Encore

Hi Joe,
I've discovered, with frustration and blinding annoyance, that the standard Windows keyboard shortcuts do not work in Encore CS 5.5 (which is what I have). Strange thing is that if you go to Edit (using your mouse) and pick Cut, Copy or Paste, they all display the Windows keyboard shortcuts next to them.
Anyway, the only way these functions will work, is you have to go around the long way and use the mouse. What I can't believe is that Adobe let this slip through. I had a major complaint about Audition CS 5.5, in which the loop function does not work properly. That I could'nt believe either. After much complaining and moaning, the general feeling in the forum, and from Adobe reps, was that I should buy the updated version CS 6. I said, why the hell should I, when I paid money already, to have this thing working in this version?
Another thing about Encore is that it must be the worst software I have had the displeasure of working with... it is unfriendly like a hungry lion, very badly designed, and contains a design that I would call archaic. One example: you have a "Selection Tool" and then you have a "Direct Selection Tool", and they need this, because one cannot do both... Jeez guys... are you taking a leaf out of Nokia's book? We had a saying for Nokia after they launched the N-Series phones: we said all their designers must be on drugs, to be making such obviously bad mistakes in their system design.
A while ago I read in one of the forums that Adobe has software full of holes, and I found myself thinking that that was a bit harsh. Now, in hindsight, I realise this contributor obviously had a bit more experience with the Adobe software than I had, because I find myself on a daily basis, agreeing more and more with him.
I have the whole Production Suite. In After Effects, the damn thing does not give you the facility to export in exactly the same format as that which your imported clip is in... if you want to do that, (which is in most cases what you want, so that it fits right into the PP project you're busy with) you have to jump through hoops and rings of fire. It is so painfully clear that a simple, single function "export in same format as original clip" is badly needed. And then the program rarely exports properly... it exports with missing frames, almost every export.
I am bitterly disappointed with this software, and the situation is now just such that I will wait for a much longer time before I upgrade again, if ever. Wow Adobe... this situation is dire, and borders on the shameful.

Not all of these are for the latest version, but most of the information is the same
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Encore Import Formats http://forums.adobe.com/thread/622722
Even if you have a later version, this is a good book to learn Encore
http://www.amazon.com/Focal-Easy-Guide-Adobe-Encore/dp/0240520041/ref=sr_1_1?ie=UTF8&s=boo ks&qid=1277266925
As well as the below, right click the Encore icon and select Run as Administrator,
which is NOT the same thing as running the computer with the Administrator account, and
which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you
MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/969395
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and
then use the FREE http://www.imgburn.com/index.php?act=download to write files or
folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like
his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as
the box label (Memorex is notorious for buying "anything" and putting it inside a
Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your
burner has the best chance to create "good, well formed" laser burn holes... since no
DVD player is required to read a burned disc, having a "good" one from a high quality
blank will help
Use Taiyo Yuden single layer or Verbatim Two layer Or Falcon Pro for inkjet printable Two layer

I am trying to install Adobe Encore, but it has been discontinued. Can I install and activate a previous version using my Single App Premier Pro membership?

I am trying to burn and author a Blu Ray DVD. I do not have a usable version of Encore , as it has been discontinued. I currently have a Single App membership for Premier Pro CC.
I was advised to install Premier Pro CS6 as Encore comes with this package. I did this, and the software downloaded but an error message came up saying my membership had expired. I think this is because I do not have permission to run Preier Pro CS6 using my Premier Pro CC membership. How can I get the software using my current membership? Or do I need to upgrade my membership to a full Creative Cloud membership in order to use Encore?

CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

Encore CS6 Timeline Button Endpoint Error

Adobe has succeeded in making the burning of a project DVD as impossible as possible.
WIn 7 Pro 64 Bit
I downloaded the previous version of Premiere Pro (PP) 6 and installed it to get Encore. Then I had to uninstall Premiere Pro 6 because it was crashing my rip in PP CC. I download and install the functional content for Encore 6 (EN6).
I open my project in PP CC. I built my project fully in one timeline in PP CC. It has hundreds of images, video clips, voice overs and music. I added 8 Chapter Markers to my one timeline and named them appropriately. I exported a DVD Mpeg2 video and audio to my DVD Folder. I took a screen capture and exported it to PS CS6 and made it a PSD.
I brought everything into EN6 and began building my menus. I have one video file and audio file in the EN 6 timeline with 11 chapter markers for the entire 27 minute film. I only want to put 8 on the menu. I create Poster Frames and assign them to the chapters in the timeline. I brought in my psd and set it as the background of the menu. I chose the Film Video Button from the buttons panel and dragged it on the screen. I duped the button until I had 8 for each of my 8 scenes that are within one timeline. I name each button appropriately and associate each button with the right scene and go to the flowchart.
In the flowchart panel all my scenes show up below the main menu Thumbnail and they are all named correctly and start the correct scene when clicked. However the individual scene thumbs can only be associated with one end point and they all have the same name. Whatever name I type into the Timeline name field becomes the name for every scene thumb. In this case they are all named "1". I only get to associate one thumbnail out of the entire set of 8 thumbs to an Endpoint and every other Thumb receives the same Endpoint I suppose its ok because I want them all to go back to the menu at end.
So Adobe Tech support says this is a workflow issue, but can't identify where the problem in my workflow is. There is no resource they can find for me online and I cannot find anything relevant to the issue. So he advised me go to where the real experts are - The Forum - Pat yourselves on the back as you are all unsung heroes out there working these forums. He also had me send him my EN6 file and will get back to me in 4-7 days.
Does anyone have any idea what I have done wrong in my PPCC or EN6 workflow to create this problem?
Does anyone have any idea what kind of dope the premiere pro engineering team was smoking when they developed this fantastic way to create a DVD?

Thanks Stan - SO here is where an Adobe Tech recommended this tutorial
Agam Basman [email protected] via
Mar 26 (2 days ago)
to
Hi ,
       Please find Encore Tutorial link mentioned below :
1.        Chapter 1 (Getting Sequences into Encore)
2.       Chapter 2 (Creating Menus)
3.       Chapter 3 (Buttons & Wiring up our Project)
4.       Chapter 4 (Checking & Building our Project)
5.       Chapter 5 (Creating a Web DVD)
6.       Chapter 6 (Creating Motion Menus )
7.       Chapter 7 (Creating Slide-shows Part 1)
8.       Chapter 8 (Creating Slide-shows Part 2)
9.       Chapter 9 (Creating Slide-shows Part 3)
But I have now solved the problem - The solution is don't use Adobe and you will be fine. I imported my H.264 into Movie Magix Edit Pro 17 and finished burning the project in 45 minutes. Trying to burn a DVD with PPCC and EN6 is as much fun as hitting yourself in the head with a ball peen hammer.

Permissions issue when seeing DVD drive in Encore

Hi,
I currently have an issue when using CS4 Premiere Pro Encore in that I can see the DVD drive available (build) when I have admin rights to the machine, but when I change those admin rights to Power User, the DVD drive is not seen by Encore. I am using the Roxio DE 10.3 (Dell's cut down version) as a DVD/CD writing software.
I would be very grateful for any help on this issue.

As far as I know, Premiere/Encore REQUIRE Aministrator right to operate fully
Also...
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
Plus a Microsoft note http://support.microsoft.com/kb/314060
Plus...
Encore Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/

To givingupusa - a simple Encore Tutorial

Similar Messages

Maybe you are looking for