To Grey out the material , item catagory and qty for BOM items.

Hi,
  I have situtation where we need to block the changes for the BOM sub items when change of sales document(VA02). Ultimately user should not be able to change the sub items of BOM in VA02.

Hi Ramakrishna Garapati,
You can gray off the BOM sub items ultimately this will enable who ever has this profile to use va02, they will not be able to do any changes, if required also. This will restrict everybody under this profiles. In case you need to do some change it does not allow.
The best possible way is to restrict the user from Transaction VA02, and make it authorized Tcode, i.e. when required need to take the authorisation and do the necessary changes, this way it is tracked.
We had similar kind of issue, now restricted from using VA02, once authorized you get different login/pwd, specially for that point of time. Once changes done your pwd expires.
Regards,
Harish.

Similar Messages

  • Material stock received and issued for a given period of time

    HOW to get the material stock received and issued for a given period of time including the open orders.
    if there is any BAPI Available then please tell me. or give me the table relations thaks.
    thanks inadvance

    hi friend,
    Why don't you try using a TIMER. Try using this code
    Timer timer = new Timer((TIMER), new ActionListener()
         public void actionPerformed(ActionEvent ae)
    // perform your task here...
    timer.setInitialDelay(TIMER);
    timer.setRepeats(true);
    timer.start();
    I think this will work fine.
    Bye,
    Ravi.

  • I would like to use GarageBand to remaster downloaded music files that are in iTunes.  Poorly mastered files keep clipping and damaging my speakers.  When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.

    I would like to use GarageBand to remaster downloaded music files that are in iTunes.  Poorly mastered files keep clipping and damaging my speakers.  When I try to use an iTunes file as a new project, it greys out the iTunes songs so I can't select them.  Any ideas?

    As I said - look whether your original file is damaged or not. If not, I wouldn't change it and find out what in your system makes it sound like it's clipping.
    Good sound file, with volume maxed out. No need to change anything.
    The same song clipped - no chance to repair.

  • My i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting general

    my i4s wifi button is not working. when i opened the setting and then wifi the button is greyed out. then i opened general and then about. in the bar of wifi address it is written N/A. what does its mean. i have done all other things like setting >general<reset<reset network setting. but all in vain. tell me the solution

    restore your phone as new through itunes. if the issue persists after a factory restore via itunes, it means you've got a hardware issue and the phone needs to be repaired

  • How to find out the selected item in the lsit

    Hi all,
    How to find out the selected item in the list,can any please post some examples which easy to understand,because iam not a good programmer

    This sample program uses a checkbox as selection,  you could also use a HOTSPOT.
    report zrich_0002 no standard page heading.
    data: imara type table of mara with header line.
    data: check_box(1) type c,  
       report_lines type i.
    start-of-selection.
    * Create the gui status with BACK button in standard place
    * and a READ button in the application toolbar
      set pf-status 'CHECK'. 
    select * into corresponding fields of table imara           from mara up to 100 rows.
    loop at imara.   
    write:/ check_box as checkbox, imara-matnr, imara-matkl.  
    hide imara-matnr. 
    endloop.
      report_lines  = sy-linno - 1.
    top-of-page. 
    write: 'List of materials'.  uline.
    top-of-page during line-selection.  write:  'Material.....'.  uline.
    at user-command. 
    case sy-ucomm.  
    when 'READ'.   
      check_box = space.    
    set pf-status 'CHECK' excluding 'READ'.
          do report_lines times.       
    read line sy-index field value check_box.    
       if check_box = 'X'.        
    write:/  'You have selected material',
    imara-matnr.       
    endif.   
      enddo. 
    endcase.
    Regards,
    Rich Heilman

  • Grey out the purchase group fields in SRM 7.0 ?

    Hi Experts,
    We have a requirement where in we need to grey out the purchasing group field in the item section of shopping cart screen . we are using SRM 7.0 portal. So that users cannot change the defualt pruchasing group.
    Is there a way where we can make this invisible without making any changes to the standard code.
    We have checked the below path, we are not getting the correct field for purchasing group in that.
    SRM -> SRM Server -> Cross-Application Basic settings -> Extension and Field Control (Personalization) -> Control Actions -> Display Standard Metadata for Actions on Substructure Level Regards
    Any Help in this regard will be highly appreciated.
    Regards
    Venkatesh P

    Hi ,
    Below are the details :
    General Information About the Application and Component
    Application: /SAPSRM/WDA_L_FPM_GAF
    Web Dynpro Component: /SAPSRM/WDC_DODC_SC_I_BD
    Window Information: IV_L_FPC_CA_DETAILS
    View Information: V_DODC_SC_I_BD
    Configuration ID: /SAPSRM/WDCC_FPM_DODC_SC_I_BD_WI
    Information on Field
    Field ID: PURCHASING_GROUP_DROPDOWN
    Type of UI Element: DROPDOWN_BY_IDX
    UI Element Library: STANDARD
    But this field i dint find in that path.
    Regards
    Venkatesh P

  • How do i synch my pdf/books to my library. I was able to synch my ipod touch purchases by transferring them but can't figure out how to do my pdfs. Also why is my ipod picture greyed out-the one that lets my move the icons around.

    How do i synch my pdf/books to my Itunes  library. I was able to synch my ipod touch app purchases by transferring them but can't figure out how to do my pdfs. Also why is my ipod picture greyed out-the one that lets my move the icons around.
    I am afraid if i don't get the pdfs into my book library, i will lose them when i update to IOS 5-is that true?

    thank you-i have to check into the authorization and the account-i gave my husband my old ipod when i updated last year so both at one time have been on this computer but as it stands, it only comes up with my device when i plug into Itunes.
    i don't think i have any restrictions for installing apps although my normal way of doing it is to download from the ipod touch. i did find that all i had to do was right click on my device name and got the message to transfer my apps and then they showed up in my library. Also when i clicked the synch checkbox i was able to view the ipod touch picture without it being greyed out. after all that i was able toupdate to IOS 5 successfully except my videos and podcast, and pdfs  did not come over. This confuses me since i had dragged them over to my library to make sure that i had everything in my library and on my device. Not a big problem, since i just dragged them in itunes from my library to my device but sometimes i wonder if i understand the big picture:)

  • How can I grey out the 'Next' button until a user clicks 'Submit'?

    Hi guys,
    despite how I say it or display it in slides, users don't read the instructions before the quiz. This results in them doing the quiz and then asking me why they scored zero when they answered all the questions. So my question is, how can I disable/deactivate/grey-out the Next button until a user clicks Submit after answering the question?
    I've got Captivate 6.1 on a Windows platform.
    Advice appreciated.
    Carl

    Hello Rod,
    thanks for your answer - I should think more laterally in future.
    In my testing, another question has arisen - how do I get the Next button behind the Clear button? It sounds stupid but I can't get the Next button behind the Clear. I go in to the Master Slide, click on Next to highlight it, and then move it either by the mouse or with the arrow button so that it sits under the Clear button. While Next is still highlighted I click on the button in the toolbar 'Send selected objects backward' to be sure, so that I see 'Clear'. When I go back to the Filmstrip, all I see is 'Next' and when I preview the slides all I see is 'Next' - what am I missing here? What have I failed to do? What am I not understanding?
    Advice appreciated.
    Thanks

  • How to disable (grey-out) the ticks of a JSlider?

    Hi everyone,
    In my GUI, I have a JSlider that I want to be disabled (greyed out)
    because it should be only actived on my application next version.
    (It is important though to have it to preserve GUI appearence).
    Problem is that I was unable to greyout the ticks even though
    already managed to grey out the slider and the number labels.
    Right now, it is pretty uggly to have a partial disabled slider,
    because due to ticks not being disabled.
    Questions:
    1) Does anyone have an idea of how to do it?
    A small part of my code is shown below:
    JSlider dynSl = new JSlider();
    dynSl.setMajorTickSpacing(1);
    dynSl.setValue(0); //Default
    dynSl.setMaximum(7);
    dynSl.setMinimum(0);
    dynSl.setPaintLabels(true);
    dynSl.setPaintTicks(true);
    dynSl.setFont(new java.awt.Font("Dialog", 0, 9));
    dynSl.setSnapToTicks(true);
    dynSl.setEnabled(false);
    // small code just to put the numbers of the slider smaller
    Enumeration enum = dynSl.getLabelTable().elements();
    while (enum.hasMoreElements()) {
    JLabel elem = (JLabel)enum.nextElement();
    elem.setFont(new Font("Dialog",0,8));
    elem.setEnabled(false);
    2) If not possible, how do I change the colour of a JSlider (including
    the Ticks)?
    My idea is to change Slider's colour to the same grey colour one used
    to disable it, making at the end the slider look as if it was disabled.
    Thanks in advance,
    Jorge

    Hi again,
    Thanks for the help.
    I was trying to avoid not having the ticks at all but it seems to be
    the best choise because I could not solve the problem of greying out
    them.
    I did some more troubleshooting though and for my surprise, if I use
    the same code alone, i.e, a simple frame with just the slider it works
    fine. I even thought that it was related with having Windows LnF as
    opposed to Metal (Java) LnF, but that was not the problem.
    The only thing it comes to mind, is that there may be some problem by including the slider on a GridBagLayout !?!?!?
    Anyway,
    What has no simple solution, solved is! :-)
    Jorge

  • How to Grey out the field "tracking number" during change mode in the order

    HI Expert,
    How to grey out the Tracking number (AFVGD-BEDNR) at Order -> Operation tab -> external tab ->tracking number.
    during creation IW31 = not grey out and allow entry.
    for change mode IW32 = grey out
    if i set grey out at config OIOPD, it will grey out even during creation mode.
    Please advise
    Thanks
    Regards

    Hi
    I think Using field selection it is not possible to make as display ,kindly check with screen or transaction variant -SHD0
    regards
    thyagarajan

  • The workflow could not check out the list item.

    Hi Guys,
    I have a workflow enabled on document library and it needs to started manually.
    Whenever user starts workflow manually, gets following error:
    "the workflow could not check out the list item. Make sure the list item is not checked out." list item is not checked out & this workflow was working smoothly earlier.
    OutCome: The workflow operation failed because the workflow lookup found no matching item.
    I have gone through below links:
    https://christopherclementen.wordpress.com/2014/05/23/oob-approval-workflow-error/
    https://social.msdn.microsoft.com/Forums/office/en-US/f673d0f6-92eb-4057-95ff-ed3cb7790360/the-workflow-operation-failed-because-the-workflow-lookup-found-no-matching-item?forum=sharepointcustomizationprevious
    Any clue on this?
    Thanks, Nilesh

    maybe check out for editing documents setting is turned on so wokrflow needs doc to ce cheked out before proceding and user might not have permission to do that.
    please refer below link:
    http://sharepoint.stackexchange.com/questions/32399/workflow-error-the-workflow-could-not-update-the-item-possibly-because-one-or
    http://community.office365.com/en-us/f/154/t/243062.aspx
    http://stackoverflow.com/questions/1272957/document-checked-out-in-sharepoint-when-workflow-starts
    Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

  • I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out.  I can't change tags for almost all my audiobooks.  Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes11.4

    I am trying to change the order of one of my audiobooks (media kind: audiobook), but the ID tags are greyed out.  I can't change tags for almost all my audiobooks.  Music files OK. Files are all read/write. Repaired disc perms. OS 10.9.4. ITunes 11.4  I don't have iTunes Match.

    Select all the songs and then Advanced -> Convert ID3 tags.
    http://docs.info.apple.com/article.html?path=iTunesWin/6.0/en/655win.html

  • Grey out the past / greying out the past

    reposted from http://richardmcgregor.wordpress.com/tag/ical/
    "I’m surprised that iCal doesn’t grey out days in the past (or at least give you an option to do this – if there is one I can’t find it!) The typical use case for a calendar is to see what events are coming up in the future, and i don’t think marking today in a different colour is enough. I want to be able to see at a very quick glance where the past ends and where the future begins, and I think greying out past days would be perfect.
    I seem to remember a while back Google Calendar started greying out past events, although I think they should go further and grey out the past days, or at least provide that as an option."

    Dear shahin11,
    Now I wanna achieve the goal with BAdI, but I really have no idea why it couldn't be greyed out in ME51N.
    method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ITEM.
    INCLUDE MM_MESSAGES_MAC.
    DATA: I_ACT_ITEMS TYPE MEREQ_ITEM.
    FIELD-SYMBOLS :<fs_sakto> type ANY.
    DATA: STR TYPE STRING.
    if I_ACT_ITEMS-MATKL ne 6299 AND SY-TCODE = 'ME51N' AND i_act_items-KNTTP = 'K'.
    STR = '(SAPLMEACCTVI)MEACCT1100-SAKTO'.
    ASSIGN (STR) TO <fs_sakto>.
    IF SY-SUBRC = 0.
    LOOP AT SCREEN.
    IF SCREEN-NAME = <fs_sakto>.
    SCREEN-INPUT = 0.   " grey out field - sakto
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.
    ENDIF.
    endif.
    endmethod.
    Can you give me a hand?
    Thanks a lot.

  • Hi, my wifi button just greyed out a few minutes ago and I can't connect to wifi. Have followed instructions given by Apple support but it's still not working. Does anyone have a solution? Thanks

    Hi, my wifi button just greyed out a few minutes ago and I can't connect to wifi. Have followed instructions given by Apple support but it's still not working. Does anyone have a solution? Thanks & Happy New Year :-)

    First, you don't have a 5+ year old 3GS. The 3GS has only been around for under 4 years. In fact, 5 years ago there were NO iPhones; the original iPhone (2 generations before the 3GS) came out on June 29, 2007 - not quite 5 years ago. The 3GS was released June 19, 2009.
    That aside, you can sync multiple phones to one computer - see http://support.apple.com/kb/HT1495. boogeyman is wrong. It is 100% safe to create an additional user name on her computer, log in with that name, and back up the phone. See this for details on what you want to do: http://support.apple.com/kb/HT2109

  • How to find out the failed sql command and its data from DEFERROR

    Hi,
    has anybody a procedure or some other possibilities to read the content of column USER_DATA of the advanced replication view DEFERROR in order to find out the failed sql command and its column values?
    Thanks in advance.

    Hi Vishwa,
                 The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
        WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
          rv_value = 'EXAMPLE'.
    Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
    This is a huge topic and  i have just mentioned you basic things.
    Regards,
    Bharathy.

Maybe you are looking for