To Hosts: System Error in iPhoto '08 forum

In the iPhoto '08 category, the "Installing & Using iPhoto '08" forum is generating a system error message. The other iPhoto forums do not seem to be affected. http://discussions.apple.com/forum.jspa?forumID=1192
Thanks.

Glad it wasn't something on my end that was causing the error. I can get to individual topics via the email response link but not thru the other avenues.
OT

Similar Messages

CCMS Error - There are system problems on the remote host (system failure)

Hi,
I have installed the SAPCCMSR agent in the AccAD(Accelerated Application Delivery) server. However, when I execute OS07 and try to view the CPU usage, I encountered this error:
There are system problems on the remote host (system failure)
Message no. S1308
Any idea what does the error mean?
Thanks.
KY

Hi,
Thanks for replying. The problem has been resolved after upgrading the sapccmsr.
Thanks.
Regards,
KY

How I fixed the 'network host busy" error

I've been down for a day solving the "network host busy' error.
First, I had fits trying to hook up this HP to my system. Here's the thread on that:
http://forums.techguy.org/networking/858081-laserjet-4500-mac-osx-10-a.html
Once all that was done, it was working.
The system was off and sometimes unplugged over the course of the evening.
I could not get it to work again.
It turned out that somehow during the course of events, the ip number of the printer had changed. I printed out the configuration page directly from the printer's configuration menu, and reset the ip address to match the new one.
Protocol in this case was HP Jet Direct socket.
Hope that helps someone out there. It looks like there are a lot of people tearing their hair out over this message and that there is no one solution.

I just found a solution to this problem and thought I would post it here, too.
I'm using a HP Photosmart C7280 with 10.6.1
Ever since updating to Snow Leopard, I kept receiving the "Network host busy" message. Today, I thought I would try running the network wizard feature on the printer itself, and after the printer connected to my router and I entered the password, the problem fixed itself. No more error message.
I'm not sure if this will work for everyone, but it did for me. Such an easy solution for such a headache-inducing problem.
Message was edited by: TNTWhite

System error 5 has occured

Hi,
I am using Oracle 10g database express edition in windows vista business. While i am trying to strat the database it shows error as "system error 5 has occured" and whenever i am trying to connect the databse from SQL * PLUS it thrown error . error as follows." ORA-12154:TNS :could not resolve the connect identifier specified". TNSNAMES.ORA file as below
# tnsnames.ora Network Configuration File: C:\OracleDevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEXE)
RAM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
)

Hi Muhammad,
The error message is “Access Denied”, you need to logon as an account which has sufficient privileges to perform this action.
In addition, I suggest you open Services and navigate to the problematic service, then check the account information under Log on tab.
Here are some similar threads below I suggest you refer to:
Windows 2008 service access is denied.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e57de215-a013-40cd-80ea-ed38e2a7f092/windows-2008-service-access-is-denied?forum=winserversecurity
Services Cannot Start on Win Server 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/68215d6c-683e-4495-ab50-26a5ad8ea239/services-cannot-start-on-win-server-2008-r2?forum=winservergen
WS2008R2 shows BFE service will not start - access denied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f2e08bcf-d517-40a7-9c69-8cacc2fa5330/ws2008r2-shows-bfe-service-will-not-start-access-denied?forum=winservergen
Best Regards,
Amy

SYSTEM ERROR 1312 OCCURING WHEN RUNNING NET LOCALGROUP FROM REMOTE MACHINE

while running workflow through AO am connecting to server 2008 r2 and running net localgroup command.the output is :
<line index="1">Copyright 2010 BMC Software Ltd, Version: 1.5 </line>
<line index="2">Connecting to remote service...</line>
<line index="3">Connected to remote host.</line>
<line index="4">System error 1312 has occurred.</line>
<line index="5">A specified logon session does not exist. It may already have been terminated.</line>
<line index="6">Remote application exited with code: 2 </line>

Hi,
Have a look:
http://blogs.technet.com/b/askperf/archive/2012/04/18/task-scheduler-error-a-specified-logon-session-does-not-exist.aspx
http://social.technet.microsoft.com/Forums/windowsserver/en-US/a7853ac3-6c48-4615-896a-e306067ab804/net-use-via-powershell-returning-a-specified-logon-session-does-not-exist-it-may-already-have-been?forum=winserversecurity
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

SQORA32 driver could not be loaded. System error 1114: A dynamic link library (DLL) initialization routine failed

I have an MS Access 2013 application that opens a connection to an Oracle database via an Oracle client.
On occasion the application returns the following error when the ODBC connection is opened:
Specified driver could not be loaded due to system error
1114: A dynamic link library (DLL) initialization routine failed. (Oracle in OraClient11g_home1, C:\oracle\product\11.2.0\client_1\SQORA32.DLL).
This is an intermittent problem that is reproducible on several workstations (all running Windows 7 x64 with 32-bit version of Office 2013 and 32-bit Oracle client 11.2.0).
Many times the ODBC connection is established without a problem
Other times the connection can be established by closing then re-opening the application once
Other times closing the re-opening the application several times does not help
The same application is being run on several workstations and not every user experience the problem at the same time. The problem may be chronic for one user whereas another user experiences no problem whatsoever.
All of the posts I have seen concerning this issue are for a persistent problem opening a connection and not an intermittent one. I am at a loss of how to diagnose this problem and would appreciate some direction.

Hi Ross,
This error message is Microsoft Data Link Error, this error occurs on windows when attempting to start a service or load a system driver but the DLL you loaded or one of its dependencies returned FALSE. It typically point to a system DLL file which is located
in system32 and can be fixed by using the System File Checker tool. In your case, I suspect that it occurs due to a calling failure connecting to ODBC driver and it pointed to an error link C:\oracle\product\11.2.0\client_1\SQORA32.DLL which is hosted by oracle.
If they are analogous, a “repair” seems to be helpful, However since we are not expert about oracle program I‘d suggest you check if C:\app\Oracle\BIN\SQORA32.DLL file exists on your machine and contact with Oracle first, I think there you can get more effective
suggestion by other experts who familiar with design of Oracle database. Your understanding is highly appreciated.
By the way, I searched for you and seems like you are not alone about this issue.
https://community.oracle.com/thread/2301119
https://communities.sas.com/message/118002
http://forums.networkautomation.com/forum/messageview.cfm?catid=50&threadid=11611
Please note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to fix file system error 56635 in windows 8.1

heelo pls help me to fix this problem i cant install any on my laptop.
file system error 56635 is showing up wen i install my kaspersky 2015

Hello Jay,
The current forum is for developers. I'd suggest asking non-programming questions on the
Office 2013 and Office 365 ProPlus - IT Pro General Discussions forum instead.

SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

Hi,
I am trying to figure out how to fix my problem
Error: Could not be opened. Operating system error code 5(Access is denied.)
Process Description:
Target Database Server Reside on different Server in the Network
SSIS Package runs from a Remote Server
SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
SSIS Package use variables to specified the share location of the files using UNC like this
\\server\files
Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
Below post it has almost the same situation:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any availabl

I used migration to send photos form my Mac Book to my I Mac now i get an error message "iPhoto can not be opened because of a problem" Check with the developer to make sure iPhoto works with this version of Max OSX. You may need to install any available updates or reinstall IPhoto.
I tried installing Iphoto it said it was downloaded successfully. I still get the error messafe, and can not open any photos of program, any suggestions?

What version of iPhoto do you have on the Macbook and on the iMac? What systems are you running on the Macbook and on the iMac?
Does the message only refer to "a problem" or does it specify what it is?
Happy Holidays

RT target reboots due to system error

The RT target reboots and displays the following error after the normal setup info:
Reboot due to system error.
Redirecting output to log file.
I don't know where this "log file" is saved and I don't know why the rt engine restarts.
I have 3 PCI 6143 boards and I'm reading at 250 ksamples/sec. I'm storing the data to an RT FIFO (waveform dbl array type) and using TCP to send this to the host computer where I want to display in a graph. The vi on the target computer runs fine without any connection to the host computer. When the vi on the host computer starts up, however, problems start to happen.
The host computer gets the data from the target very slowly. It takes about 5 seconds for TCP Read to read the byte size. The byte size is about 600kb. After the byte size is read the rt engine mysteriously restarts and displays the message above. My system works fine if I change all the waveform dbl array types to DBL Array. The reason I want a waveform type is because the host computer is not getting enough data with the DBL Array. For example, instead of getting a steady, straight line in the graph, I get a line jumping from 0 to the value it's supposed to be over and over.
I'm using vis similar to the vis created by the RT Communication wizard for both the target and host communication.

hi Kristi,
thanks for responding.
I'm using Labview 7.1 Real-time on a dell gpx 270 on a LAN (gigabit connection) using static IPs. I'm currently doing continuous analog acquisition on multiple channels (24 total). I have a normal priority loop managing the TCP connection, a time-critical loop within that acquiring data. On the host computer (another dell) I have all normal priority vis. I have 1 VI that contains 2 vis in it- a vi that handles the GUI and a vi that handles the TCP.
I gave up on using waveforms so i'm getting the y-component out of the 1D-waveform that i get from the daqmx vi and putting that into a 1D dbl array and storing it in an rt-fifo. By the upload, hopefully, you can see what i'm talking about. Without using waveforms the rt target does not reboot, but i still get jitter. The host computer (with the gui) seems to be reading an empty fifo more times than it has data. When I put a 100ms wait in the TCP loop on the host computer, I get the data slower, but no jitter. I don't know anything about timing so I'm guessing that's my major problem. Am I supposed to put waits inside of various loops?? I varied my time-critical loop wait time from 1ms to 3ms to see if anything would change, but no changes.
On a side note I will be acquiring data from a total of 13 6143 PCI boards from 5 different PCs when this is all done.
Attachments:
simplesystem.JPG ‏15 KB

Error while creating Mysite in sharepoint 2010 , System error code 0

Hi I was trying to create Mysite and I got the following error.
Previously all user able to create MySite this error is coming from 3 days
My Site creation failure for user XXXX\cwr.SMahindrakar' for site url 'https://XXXXXXXX/personal/cwr_smahindrakar'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create the site. ---> System.ArgumentException: Error during decryption. System error code 0.
at Microsoft.SharePoint.Administration.SPCredentialManager.DecryptWithApplicationCredentialKey(Byte[] rgbEncryptedPassphrase)
at Microsoft.SharePoint.Administration.SPPeoplePickerSearchActiveDirectoryDomain.get_Password()
at Microsoft.SharePoint.Utilities.SPActiveDirectoryDomain..ctor(SPPeoplePickerSearchActiveDirectoryDomain peoplePickerDomain)
at Microsoft.SharePoint.Utilities.SPUserUtility.GetWindowsPrincipalResolvers(SPWebApplication webApp, String userAccountDirectoryPathRestriction, SPPrincipalResolver bySidResolver)
at Microsoft.SharePoint.Utilities.SPUserUtility.CreatePrincipalResolvers(SPWebApplication webApp, ICollection`1 urlZones, Nullable`1 currentZone, SPPrincipalResolver bySidResolver, String userAccountDirectoryPathRestriction, Boolean alwaysAddWindowsResolver)
at Microsoft.SharePoint.Utilities.SPUtility.ResolvePrincipalInternal(SPWeb web, SPWebApplication webApp, Nullable`1 urlZone, String input, SPPrincipalType scopes, SPPrincipalSource sources, SPUserCollection usersContainer, Boolean inputIsEmailOnly, Boolean alwaysAddWindowsResolver)
at Microsoft.SharePoint.Utilities.SPUtility.ResolvePrincipal(SPWebApplication webApp, Nullable`1 urlZone, String input, SPPrincipalType scopes, SPPrincipalSource sources, Boolean inputIsEmailOnly)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.SPSite.SelfServiceCreateSite(String siteUrl, String title, String description, UInt32 nLCID, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String contactLogin, String contactName, String contactEmail, String quotaTemplate, SPSiteSubscription siteSubscription)
at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
--- End of inner exception stack trace ---
at Microsoft.Office.Server.UserProfiles.UserProfile.<>c__DisplayClass2.<CreateSite>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
Error is coming on Prod Env, I have tried diffrent trial and Error method but still I am not able to find root cause.
Please mark answer , if you think answer is helpful or correct.

Hi All,
To resolve these issues I have checked following things, and which all seems no issues
1)Quota Limit
2)Database read only mode
3)Appl pool account access to database
4)Changed app pool account with farm account
5)Added app pool account to MySite admin group
6)Database size limit
7)Site collection site limit to MySite host
8)User Profile service is running or not
9)Self site creation to user
10)Service application association to MYsite Host
All above I have tested but it seems no error, still I am getting above Error.
One more things I want to add is that Central admin people picker does not recognize users.
That can be an issue?
Please mark answer , if you think answer is helpful or correct.

System Error while sending the IDOC to Broker

Dear Gurus ,
Due to system eroor - tRFC are failed . To reprocess failed tRFC I am using RSARFCEX and scheduling the program as job with the frequency of every 5 min. It does delete the entry from SM58 and shows like it has been processed . But when i checked with the Broker It is not . But when i execute the same program manually ( SE38) . It works perfectly fine . Any input is welcome .
I have gone though many forum for the same issue some of them suggesting to The automatic resend is configured under SM59 by making changes to your RFC destination. The RFC Destination can be assigned tRFC parameters consisting of three values. (This is done through the tRFC Options selection in the Destination menu under sm59.) These options are:
a.Suppress background job if connection error
If this flag is set to X and a connection error occurs there is no automatic resubmittal of the transaction to the external application. If it is not set, jobs are automatically created according to the following two parameters.
But i am not convinced as this looks like that it is related to communication error . but in my case it is system error .
Would be great If anybody can suggest whether above option is mandatory for any tRFC failure or not ?
Regards
Sameer

Hi Hetal ,
Thanks for asking . Yes As far system permission is concerned that is fine . As mentioned it works fine with manual process but It does not work when job is scheduled . But at the same time there is no error tracked in SAP .
REgards
Sameer

Java System error: SSO not authorized: authorization Failed

Hi,
I am getting the following error while opening a BEx report designer or WAD and iam unable to design any report or create a dashboard
"Java System Error: Call to FM BICS_CONS_GET_VIEW_DEF_J_PROXY to ProdId ASEP_PORTAL_E01 on host ASEP wiht SSO not authorized . Authentication Failed"
System Details:
BI and EP are installed in Same server
BI Config:
softwarwe component : SAP_BW
Release : 700
Patch Level: 0021
Support Pack : SAPKW70021 (SAP NetWeaver BI 7.0)
EP config:
SAP NetWeaver BI 7.0 SP Level 15
Please suggest .

It seems that something wrong in integration between JAVA Stack (from where you accessing BW report) a BW back end system. Try to run Support Desk Tool:
http://<your_server>:<port>/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
to see what is wrong in this area.

Fehler javax.xml.rpc.soap.SOAPFaultException: System Error

Hi,
I tried to create a web service with XI with the help of the blog: Invoke Webservice using SAP XI under https://weblogs.sdn.sap.com/pub/wlg/2292. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] When I create the web service with the url from the tutorial: http://host:port/XISOAPAdapter/MessageServlet?channel=:<service>:<channel> the url is not found. If I use the proposed url I got the error: Fehler javax.xml.rpc.soap.SOAPFaultException: System Error.
What could be the problem?
Thank you!
Julia
Message was edited by: Julia Seifert

RWB = runtime Workbench
when you start integration builder you 4 choices (Integration Repository, Integration Directory, System Landscape Directory and Runtime Workbench)
Go their and on the next Webpage on the first link "Comp. Monitioring"
Go to "Integration Server" and their to Adapter Engine
you will get another window below.
Go their on button Adapter Monitoring and we will get a overview which are working and which not.
Hope this helps!
Regards Matt

2 probs! HDD Formatted and no recovery discs and "1962 NO Operating System" error message

Hi, I have had my Lenovo Idecentre B540 for approx 2 weeks now and my hard drive had to be formatted and windows reinstalled. However, this means the partition is lost and i had no recovery disc or drivers disc with it so have been unable to get the touchscreen working and probably missing out on all the features that were the reasons for buying this machine.
Running Windows 7 home premium and have downlaoded all the drivers from the support page on here but nothing there for the touch panel drivers and cant find it or ideatouch 4.5 online either.
I would like a disc sending to me or a link to be able to downlaod please.
Also now i have had
"1962 no operating system" error message when booting. ANy known reason for this? Lots of guesses online but no concrete answer.

You might look at this thread and you might also do a search: http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/LENOVO-IDEACENTRE-B540-ONE-KEY-RECOVERY...

To Hosts: System Error in iPhoto '08 forum

Similar Messages

Maybe you are looking for