To identify a equipment based on material, plant and functional location

HI Gurus,
I wanted to identify whether there is any equipment is already created for a given material, plant and functional location. can you tell me how to findout?
Thanks
satya

Hi
Check with respect to material and serial no : TCODE : IQ08 or IQ09
Try in IH08
You can define material, plant and functional location
- Pithan
Edited by: Pithan Pithan on Mar 31, 2009 4:13 PM

Similar Messages

FM to check material plant and storage location combination

I need to build a check that material is extended for plant & storage location.Please guide id some standard function module exists.
I do not want to write select query using MARD.

Hi ,
try this FM
MARD_SINGLE_READ
Regards,
Rohan.

Combination of Material,Serial Number, Plant and Storage location

Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
Kartavya

Hi,
Please check table EQSE (OBJK -> EQSE).
Regards,
Ferry Lianto

Search shopping cart by plant and storage location?

Hi,
is there any standard report or anyway to search the shopping cart based on the plant and storage location..
please let me know..
thanks

Hi ,
Not directly as Yann says.
But indirectly
from SRM org structure -> ex attribute -> location
go to yr desired plant
get all the employees assigned to this plant
In admin log in -> monitor shopping carts
use these employees as requestors
and search
let us know if it suits your need
BR
Dinesh

BAPI/FM ro retrieve stock based on material plant batch combination

Hi Experts,
Can anyone help me in giving information about the FM or BAPI that would fetch inventory/stock for the material plant and batch combination. I refered to some of the BAPI's like BAPI_MATERIAL_STOCK_REQ_LIST , MD_STOCK_REQUIREMENTS_LIST_API but these do not have batch numebr as a parameter.
Can anyone help me on this?
Thanks in advance,
Rashmi

Hi Heinz,
In the sales order you can go to the Item -> Schedule lines and you can split it.
Did you resolved if so shall i know how.
Regards
Agasthuri Doss

How to get ATINN value based on material number and Class Type ?

I have below SELECT stmt code which gives the correct value of atwrt based on materil no and ATINN.
However in quality system, it is failing because in quality system "atinn" value is not 0000000381. It is different.
So how can I get ATINN(Internal characteristic) value based on material number and Class Type?
-Obtain the batch characterstic value for the Material******************
SELECT atwrt
    UP TO 1 ROWS
    INTO v_charvalue
    FROM ausp
   WHERE objek = mcha-matnr
     AND atinn = '0000000381'   " 'US80_FRENCH_ON_LABEL'
     AND klart = '001'.
THANKS N ADVANCE.

Hi SAm,
use the Below function module to get the Atinn for Atwrt for thr Class and MAterial combination..
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        classtype          = '023'       "Class type
        object             = w_object "Material number with Leading zeros
        no_value_descript = 'X'      "Default X
        objecttable        = 'MCH1'    "Table name Mara or MCH1 or MARC
      TABLES
        t_class            = t_class   "It return the Batch class available for the above combination
        t_objectdata       = t_char "Return Batch characteristics(ATWRT) and their value ATINN in this table
      EXCEPTIONS
        no_classification = 1
        no_classtypes      = 2
        invalid_class_type = 3
        OTHERS             = 4.
Regards,
Prabhudas

Table for material plant and divison

Dear All,
Please help me getting tables to get material plant and division in 1 report.
Regards,
Shreya

Hi
Use the Table: MARA for Division
Table: MARC for Plant
Regards
Prasanna

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

Call BMBC with specific material plant and batch

Hi, ive searched and tried several option to call t-code BMBC Batch Cockpit from a report with a specific material, plant and batch and untill now i was unable to do this.
Is my last option a batch input?
It seems that all those subscreens make BI my last resource.
Thanks for your help.

Hi,
For,
Step 2 :- Check your Data type of Characterstic.It should be Numeric.
Step 3:- First you have to assign Organization Area in Class Header then only you will find that field active in Characteristic screen.
Regards,
Dhaval

Need to determine plant and storaeg location for item in delivery

Hello All,
I have an inbound IDOC which changes the quantity of items in a delivery and also adds new items if necessary. I need to do a auto PGI also if required.
Am using BDC to update the delivery. Now the problem is when I add a new item to the delivery. I add the material, quantity and Unit recieved from the IDOC. I need to determine the plant and storage location and fill that too in the delivery.
Kindly let me know how I can determine these two values. Which table holds this data?
Please note that I am changing only the delivery. The document preceding the delivery wont be changed.
Thanks for your help.
Regards,
Johnson

normally the plant is determined on this basis:
customer inforecord (table KNMT)
customer master (KNVV)
material (MVKE)
The storage location is determined in table TVKOL based on:
shipping point (you have it in delivery header LIKP-VSTEL)
plant (see above)
storage conditions (material master MARA-RAUBE)
regards
Roberto

During MRP run unwanted plant and storage location include and exclude

Hi There,
During MRP run how to include and exclude the unwanted plant and storage location pls let me know the required configuration settings.
Thanks in advance.

HI,
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run :-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards
KK

Default Plant and storage location for components in MFBF

Hi,
I have 2 plants 1000-procurement plant and 2000- production plant. I am using special procurement key 70( Withdrawal from alternative plant from 1000 to 2000) for components in Plant 2000. The requirements for the components are transferred from 2000 plant to 1000 plant. The 1000 plant run MRP for the dependent requirements and procure the materials and transferred to the production storage location in Plant 2000.The raw materials are purchased in plant 1000 and transferred to Plant 2000 production storage location based on the manual reservations created with movement type 301. This is fine.
But when I do backflush in MFBF the plant and storage location for the components issue are displayed as plant 1000 which is the procurement plant and the production storage location in plant 2000-production plant location. In the BOM the production storage location is production storage location of plant 2000. Since we use the special procurement key system defaults the plant as 1000(procurement plant) insteadd of 2000(production plant). can we make this plant default to the production plant 2000 as default in the MFBF goods issue screen.
thanks and regards
Murugesan

Hi MURUGESAN !
      Can you give me some information more in Special Procument Configure in plant 2000 like:
          - Procurement type (maybe F)
          - Special procurement (Maybe U)
          - Plant (Maybe 1000).
          - Issuing plant (maybe 2000)
       We will check together.
       Regards,
      Tony

Plant maintainence -Functional Location

Dear PM Experts !
One generic question.
When we maintain the Equipment Masters from IE01.
We Define the Work center, Plant, Location.
Now in the Functional Masters in the Structure:
the equipment will be automatically populated.
Please suggest that whether we have to manually assign the Equipment to the functional Location
regards,
SAP

Hi
You have to install the equipment into Functional Location manually
Like
After creating a equipment - go to structure tab. Where you wil find install struture - Install the Functional Location there.
In the equipment create / Change Window
Go to Structure in the tool bar - Select Change or install Funcational Location
In Spro
Plant Maintenance and Customer Service - Master Data in Plant Maintenance and Customer Service - Technical Objects - Equipment - Equipment Usage Period - Define Installation at Functional Location
Define which equipment category should be accepted to install functional location
- Pithan
Edited by: Pithan Pithan on Sep 25, 2008 11:37 AM

Plant and Storage Location determination at Item level during Copy control

Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup Bansal

Hello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh

To identify a equipment based on material, plant and functional location

Similar Messages

Maybe you are looking for