To import a part of a file

sorry, my English leaves much to be desired...
I'd like to know the reason why Adobe Premiere pro has not the possibility of importing into a project only a part of a file already on a hard disc.
Very frequently we need to import into our project only few seconds or at most few minutes of a file already on a hard disc, and it is absurd to import the whole file and to take up a lot of GB.
Moreover, in my opinion a very good import function would have to offer the possibility of import the chosen part of the physical file direcly into the same library of our project...
What do you think about?

Also, in order to ingest only part of a long clip, Prelude must transcode it to a Digital Intermediate. And that DOES create a new file that takes up hard drive space. That is fine with me except for the "transcode" part.
I have asked for this capability without transcoding and was pleased to get a response from an Adobe engineer asking me how I thought it should work.
I explained that it should be possible to slice up a file without changing the codec or causing a generational loss. That only applies to all I-Frame footage, of course.
With a long GOP even if the user said to cut at 1;31;04, unless the long GOP started with that frame (a one in 29.97 chance perhaps) the cuts should begin at the beginning of the GOP. And end at the end of a long GOP.
In fact, I said I was not opposed to a full second or so of handles before and after the cuts. It might be a hassle for some of us, but it would save problems for lots of people.
Let's face it, sometimes we don't need the entire 30 minute clip. But it isn't tape so we can't just capture the parts we want. So we get stuck with huge files. I would like to see a bunch of shorter, usable files on my hard drive instead of one long one. Besides, you could make notes in the Metadata and do a better job of organizing if you had smaller files - if you are the type to use clips from various shoots in various projects.

Similar Messages

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

How to batch or individual import Canvas .CVX and .CNV files into AI CS6(mac)?

Is anyone aware how to batch or individually import Canvas .CVX and .CNV files into AI CS6(mac)? I have a large old graphics library representing 10 years of work which would be very nice to convert into Illustrator CS6...
Thanks a lot for any hint -
stefan

JETalmage wrote:
...export them as an EPS or another file type that windows will recognize...
It's not a matter of exporting a file that Windows will recognize; it's a matter of exporting a file format that Illustrator can import or open.
A Mac OS version of Canvas is under development, by the way.
JET
My bad. Typo on my part. I meant one that Adobe will recognize.
Too early yet. I shouldn't try to type before I get my first morning tea.
--OB.

Need a script to import the data from flat file

Hi Friends,
Any one have any scripts to import the data from flat files into oracle database(Linux OS). I have to automate the script for every 30min to check any flat files in Incoming directory process them with out user interaction.
Thanks.
Srini

Here is my init.ora file
# $Header: init.ora 06-aug-98.10:24:40 atsukerm Exp $
# Copyright (c) 1991, 1997, 1998 by Oracle Corporation
# NAME
# init.ora
# FUNCTION
# NOTES
# MODIFIED
# atsukerm 08/06/98 - fix for 8.1.
# hpiao 06/05/97 - fix for 803
# glavash 05/12/97 - add oracle_trace_enable comment
# hpiao 04/22/97 - remove ifile=, events=, etc.
# alingelb 09/19/94 - remove vms-specific stuff
# dpawson 07/07/93 - add more comments regarded archive start
# maporter 10/29/92 - Add vms_sga_use_gblpagfile=TRUE
# jloaiza 03/07/92 - change ALPHA to BETA
# danderso 02/26/92 - change db_block_cache_protect to dbblock_cache_p
# ghallmar 02/03/92 - db_directory -> db_domain
# maporter 01/12/92 - merge changes from branch 1.8.308.1
# maporter 12/21/91 - bug 76493: Add control_files parameter
# wbridge 12/03/91 - use of %c in archive format is discouraged
# ghallmar 12/02/91 - add global_names=true, db_directory=us.acme.com
# thayes 11/27/91 - Change default for cache_clone
# jloaiza 08/13/91 - merge changes from branch 1.7.100.1
# jloaiza 07/31/91 - add debug stuff
# rlim 04/29/91 - removal of char_is_varchar2
# Bridge 03/12/91 - log_allocation no longer exists
# Wijaya 02/05/91 - remove obsolete parameters
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
# You may also consider using Database Configuration Assistant tool (DBCA)
# to create INIT file and to size your initial set of tablespaces based
# on the user input.
# replace DEFAULT with your database name
db_name=DEFAULT
db_files = 80 # SMALL
# db_files = 400 # MEDIUM
# db_files = 1500 # LARGE
db_file_multiblock_read_count = 8 # SMALL
# db_file_multiblock_read_count = 16 # MEDIUM
# db_file_multiblock_read_count = 32 # LARGE
db_block_buffers = 100 # SMALL
# db_block_buffers = 550 # MEDIUM
# db_block_buffers = 3200 # LARGE
shared_pool_size = 3500000 # SMALL
# shared_pool_size = 5000000 # MEDIUM
# shared_pool_size = 9000000 # LARGE
log_checkpoint_interval = 10000
processes = 50 # SMALL
# processes = 100 # MEDIUM
# processes = 200 # LARGE
parallel_max_servers = 5 # SMALL
# parallel_max_servers = 4 x (number of CPUs) # MEDIUM
# parallel_max_servers = 4 x (number of CPUs) # LARGE
log_buffer = 32768 # SMALL
# log_buffer = 32768 # MEDIUM
# log_buffer = 163840 # LARGE
# audit_trail = true # if you want auditing
# timed_statistics = true # if you want timed statistics
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
# Uncommenting the line below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest = disk$rdbms:[oracle.archive]
# log_archive_format = "T%TS%S.ARC"
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
# rollback_segments = (name1, name2)
# If using public rollback segments, define how many
# rollback segments each instance will pick up, using the formula
# # of rollback segments = transactions / transactions_per_rollback_segment
# In this example each instance will grab 40/5 = 8:
# transactions = 40
# transactions_per_rollback_segment = 5
# Global Naming -- enforce that a dblink has same name as the db it connects to
global_names = TRUE
# Edit and uncomment the following line to provide the suffix that will be
# appended to the db_name parameter (separated with a dot) and stored as the
# global database name when a database is created. If your site uses
# Internet Domain names for e-mail, then the part of your e-mail address after
# the '@' is a good candidate for this parameter value.
# db_domain = us.acme.com # global database name is db_name.db_domain
# FOR DEVELOPMENT ONLY, ALWAYS TRY TO USE SYSTEM BACKING STORE
# vms_sga_use_gblpagfil = TRUE
# FOR BETA RELEASE ONLY. Enable debugging modes. Note that these can
# adversely affect performance. On some non-VMS ports the db_block_cache_*
# debugging modes have a severe effect on performance.
#_db_block_cache_protect = true # memory protect buffers
#event = "10210 trace name context forever, level 2" # data block checking
#event = "10211 trace name context forever, level 2" # index block checking
#event = "10235 trace name context forever, level 1" # memory heap checking
#event = "10049 trace name context forever, level 2" # memory protect cursors
# define parallel server (multi-instance) parameters
#ifile = ora_system:initps.ora
# define two control files by default
control_files = (ora_control1, ora_control2)
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = TRUE
# Uncomment the following line, if you want to use some of the new 8.1
# features. Please remember that using them may require some downgrade
# actions if you later decide to move back to 8.0.
#compatible = 8.1.0
Thanks.
Srini

Importing rights protected ACC audio files

Is there a way to import rights protected ACC audio files into garage band?

that's part of what the DRM is there for, i'm afraid, and discussion about breaking the DRM is against the ToS here B-(>

Plans to enable import of Cinema DNG (RAW) files from the Blackmagic POCKET Cinema Camera

Are there plans to enable import of Cinema DNG (RAW) files from the Black Magic POCKET Cinema Camera into Adobe Premiere Pro CS6?

There won't be any new features introduced in CS6, only some bug fixes if ever. All new features go into CC. Rumour has it that Camera RAW will be added into PrPro (sooner or later).
Off topic question: have you tried to convert BMPCC CinemaDNG files into DNG via Adobe DNG Converter? Resulting files are about 15% larger, so I hope that is what constitutes uncompressing them and making possible to import into PrPro CC natively (I'm not on CC, hence can't test, but I'm curious).

How to import data from a text file into a table

Hello,
I need help with importing data from a .csv file with comma delimiter into a table.
I've been struggling to figure out how to use the "Import from Files" wizard in Oracle 10g web-base Enterprise Manager.
I have not been able to find a simple instruction on how to use the Wizard.
I have looked at the Oracle Database Utilities - Overview of Oracle Data Pump and the Help on the "Import: Files" page.
Neither one gave me enough instruction to be able to do the import successfully.
Using the "Import from file" wizard, I created a Directory Object using the Create Directory Object button. I Copied the file from which i needed to import the data into the Operating System Directory i had defined in the Create Directory Object page. I chose "Entire files" for the Import type.
Step 1 of 4 is the "Import:Re-Mapping" page, I have no idea what i need to do on this page. All i know i am not tying to import data that was in one schema into a different schema and I am not importing data that was in one tablespace into a different tablespace and i am not R-Mapping datafiles either. I am importing data from a csv file.
For step 2 of 4, "Import:Options" page, I selected the same directory object i had created.
For step 3 of 4, I entered a job name and a description and selected Start Immediately option.
What i noticed going through the wizard, the wizard never asked into which table do i want to import the data.
I submitted the job and I got ORA-31619 invalid dump file error.
I was sure that the wizard was going to fail when it never asked me into which table do i want to import the data.
I tried to use the "imp" utility in command-line window.
After I entered (imp), i was prompted for the username and the password and then the buffer size as soon as i entered the min buffer size I got the following error and the import was terminated:
C:\>imp
Import: Release 10.1.0.2.0 - Production on Fri Jul 9 12:56:11 2004
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Username: user1
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Import file: EXPDAT.DMP > c:\securParms\securParms.csv
Enter insert buffer size (minimum is 8192) 30720> 8192
IMP-00037: Character set marker unknown
IMP-00000: Import terminated unsuccessfully
Please show me the easiest way to import a text file into a table. How complex could it be to do a simple import into a table using a text file?
We are testing our application against both an Oracle database and a MSSQLServer 2000 database.
I was able to import the data into a table in MSSQLServer database and I can say that anybody with no experience could easily do an export/import in MSSQLServer 2000.
I appreciate if someone could show me how to the import from a file into a table!
Thanks,
Mitra

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Saving import filters of text data files in AddressBook

Hello,
Is there a way of saving the import filters that you setup when importing datas from a text file in Address Book ?? Thanks in advance.
Robert Lespérance

How can i import contacts from a csv file to "iCloud Contacts"?

How can I import contacts from a csv file to "iCloud Contacts"?

The only way I know of to import cells from a csv file is by creating a new file. But then you can select the desired cells and copy them to the other file. I just did it to be sure it works.
1. Create the new spreadsheet file via the upload command.
2. Select the cells (table) that you want to move to the other file and press command+C (copy).
3. Close the new file and open the existing file.
4. Select the top/right cell of the area to receive the copied "table" and press commant+V (paste).
I hope this is what you're trying to do!

Using applescript/automator to import and categorise multiple .txt files

Hello all,
I wonder is anyone can offer me some advice on the best approach to importing multiple text files into excel. I've searched excel specific forums, but it seems that the macro's that work on windows wont work on my mac.
Basically, I am trying to find a way of importing multiple comma delimanted text files into an excel workbook. If it is possible, it would also be great to automatically compute the data into summarised variables (e.g., the data is multiple reaction time trials [220 to be precise] and I would like to create cells within excel with the mean scores from groups of the trials [A1 to A20, A21 to A40, A41 to A80 etc.]) within a seperate sheet (at present I am importing the text files one by one, performing the calculations, before copying and paste special into a summary sheet).
I have put an example of the file in dropbox (https://www.dropbox.com/s/9y6valpkzsq8kgz/Example%20workbook.xlsx) to give anyone who is willing to help a better idea of what I mean.
Thanks in advance.
John

Danitaz,
Did you ever figure out the problem with your mail that was going out from the wrong server (2 yrs. ago)? I have the same problem from my MacBook Pro, using Mac Mail. I try to send email from my work account and then find to my surprise and dismay that I get an autoreply in my personal gmail account from the person I wrote to. I look in the Sent mail for my work account and it looks like the message went from there but I can see in the reply that it instead went from my gmail account! I tried checking the box in my work account that says "send only from this SMTP server" but that didn't fix the problem. The only way seems to be turning off the gmail in order to send with certainty from my work account. If you have any suggestions I would love to try them. Thanks!
PS Sorry to write off topic here. I wanted to reply to the original posting but I guess since it is so old I couldn't do so.

Import data from excel/csv file in web dynpro

Hi All,
I need to populate a WD table by first importing a excel/CSV file thru web dynpro screen and then reading thru the file.Am using FileUpload element from NW04s.
How can I read/import data from excel / csv file in web dynpro table context?
Any help is appreciated.
Thanks a lot
Aakash

Hi,
Here are the basic steps needed to read data from excel spreadsheet using the Java Excel API(jExcel API).
jExcel API can read a spreadsheet from a file stored on the local file system or from some input stream, ideally the following should be the steps while reading:
Create a workbook from a file on the local file system, as illustrated in the following code fragment:
          import java.io.File;
          import java.util.Date;
          import jxl.*;
         Workbook workbook = Workbook.getWorkbook(new File("test.xls"));
On getting access to the worksheet, once can use the following code piece to access individual sheets. These are zero indexed - the first sheet being 0, the second sheet being 1, and so on. (You can also use the API to retrieve a sheet by name).
          Sheet sheet = workbook.getSheet(0);
After getting the sheet, you can retrieve the cell's contents as a string by using the convenience method getContents(). In the example code below, A1 is a text cell, B2 is numerical value and C2 is a date. The contents of these cells may be accessed as follows
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
String a1 = a1.getContents();
String b2 = b2.getContents();
String c2 = c2.getContents();
// perform operations on strings
However in case we need to access the cell's contents as the exact data type ie. as a numerical value or as a date, then the retrieved Cell must be cast to the correct type and the appropriate methods called. The code piece given below illustrates how JExcelApi may be used to retrieve a genuine java double and java.util.Date object from an Excel spreadsheet. For completeness the label is also cast to it's correct type. The code snippet also illustrates how to verify that cell is of the expected type - this can be useful when performing validations on the spreadsheet for presence of correct datatypes in the spreadsheet.
String a1 = null;
Double b2 = 0;
Date c2 = null;
                    Cell a1 = sheet.getCell(0,0);
                    Cell b2 = sheet.getCell(1,1);
                    Cell c2 = sheet.getCell(2,1);
                    if (a1.getType() == CellType.LABEL)
                       LabelCell lc = (LabelCell) a1;
                       stringa1 = lc.getString();
                     if (b2.getType() == CellType.NUMBER)
                       NumberCell nc = (NumberCell) b2;
                       numberb2 = nc.getValue();
                      if (c2.getType() == CellType.DATE)
                        DateCell dc = (DateCell) c2;
                        datec2 = dc.getDate();
                       // operate on dates and doubles
It is recommended to, use the close() method (as in the code piece below)   when you are done with processing all the cells.This frees up any allocated memory used when reading spreadsheets and is particularly important when reading large spreadsheets.
          // Finished - close the workbook and free up memory
          workbook.close();
The API class files are availble in the 'jxl.jar', which is available for download.
Regards
Raghu

Using HTTPService to import data from a XML file

Hello there!
I'm having some problem's with this import... If anyone can
help, I would appreciate it!
I'm using this type of information as data source:
public var dataCollection:ArrayCollection =
new ArrayCollection([
{ id: "P1", name: "Porto", type: "team", children: [
{ id: "R1", name: "Dr Silva", location: "Bloco 1", type:
"member" },
{ id: "R2", name: "Dra Neto", location: "Gabinete", type:
"member"
{ id: "P2", name: "Braga", type: "team", children: [
{ id: "R3", name: "Dr Santos", location: "Bloco 2", type:
"member" },
{ id: "R4", name: "Dra Sonia", location: "Piso 1", type:
"member"
But I want to import it from a XML file like this:
<?xml version="1.0" encoding="utf-8"?>
<items>
<item id="P1" name="Porto" type="team">
<children id="R1" name="Dr Silva" location="Bloco 1"
type="member" />
<children id="R2" name="Dra Neto" location="Gabinete"
type="member" />
</item>
<item id="P2" name="Braga" type="team">
<children id="R3" name="Dr Santos" location="Bloco 2"
type="member" />
<children id="R4" name="Dra Sonia" location="Piso 1"
type="member" />
</item>
</items>
I already import the file, but can not translate the data
into a array collection.
private function initApp():void {
var httpService:HTTPService = new HTTPService();
httpService.url = "dataprovider.xml";
httpService.resultFormat = "e4x";
httpService.addEventListener(FaultEvent.FAULT,
onFaultHttpService);
httpService.addEventListener(ResultEvent.RESULT,
onResultHttpService);
httpService.send();
private function onFaultHttpService(e:FaultEvent):void
Alert.show("Error reading data file.");
private function onResultHttpService(e:ResultEvent):void
//Convert the xml data to a array collection
Thank you

Hello Peter, and thank you for your reply's.
My problem is that I'm receiving the data from the external
file and I don't know how to get the children in place... I mean, I
also have some data being received form a file that I can convert
into an array collection, but the thing is, that file doesn't have
children structure...
It's something like this:
<?xml version="1.0" encoding="utf-8"?>
<items>
<item id="T1" resourceId="R1" name="Cardiologia"
startTime="25-3-09 8:0:0" endTime="25-3-09 8:30:0" />
<item id="T2" resourceId="R2" name="Raio-X"
startTime="25-3-09 9:0:0" endTime="25-3-09 9:15:0" />
<item id="T3" resourceId="R3" name="Analises"
startTime="25-3-09 12:0:0" endTime="25-3-09 12:45:0" />
<item id="T4" resourceId="R4" name="Consulta"
startTime="26-3-09 8:0:0" endTime="26-3-09 9:0:0" />
</items>
And I solve it with this (don't know if is the best):
private function onResultHttpServiceTask(e:ResultEvent):void
var a:Array = xmlListToObjectArray(e.result.item);
tasks = new ArrayCollection(a);
protected function
xmlListToObjectArray(xmlList:XMLList):Array
var a:Array = new Array();
for each(var xml:XML in xmlList)
var attributes:XMLList = xml.attributes();
var o:Object = new Object();
for each (var attribute:XML in attributes)
var nodeName:String = attribute.name().toString();
var value:*;
value = attribute.toString();
o[nodeName] = value;
a.push(new ObjectProxy(o));
return a;
But when the children "enter in action" I don't know how to
bring them to the array...
This code you send it's preaty much the thing I need, but the
thing is that I don't know how to call the children with data as
e:ResultEvent...
If you can help a bit more, I would really appreciate...
Thank You

Importing and executing a .sql file into Oracle 10g

Hi
I am looking to import and execute a .sql file(create scripts created of a databse designed in MS SQL Server 2005). The file was imported into Oracle APEX 3.10 but we are unable to execute the script. Please suggest alternatives as to how we can import these files.
Thanks in advance.

You likely need to migrate the database (objects and data). This is not so easy and you should have a look to migration tools: http://www.oracle.com/technology/oramag/oracle/07-sep/o57sql.html.

Firefox can't read any Bookmark that was imported from my PC with file extension .url. Safari reads them fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox

Firefox can't read any Bookmark on my Mac that was imported from my PC with file extension .url. Safari reads them all fine. Is there a fix, so I can use Firefox instead of Safari? Many thanks if so. I have the latest version of Firefox
== URL of affected sites ==
http://anysite.url
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Hello JF.
I don't think that extension is supported. I believe Firefox can only read .json and .html.
You may want to read this though:
[http://support.mozilla.com/en-US/kb/Importing+bookmarks+and other data from Safari Importing bookmarks and other data from Safari]

To import a part of a file

Similar Messages

Maybe you are looking for