To imprt  full 9i to 11g what should  the exp parameters

to imprt full 9i to 11g what should the exp parameters,fist time it was given error some objects r created how to
import the remaining data, it will support to importing remaining data

That would be a parameter for import only and not the export.
Use IGNORE=Y in the import command (that would prevent the object existence errors but not the data duplication errors).

Similar Messages

  • My photos  are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.

    My photos  are in Raw Format when I open in Bridge and they appear very clean but when I transfer them to Photoshop they are full of noise. What should I do to fix the problem? Thanks.

    are you sure its not just the way you are viewing the photo? you don't even see noise on the preview in Bridge and when I say preview I mean when zooming into the preview window. My thought process being in PS you are zoomed in more

  • What should the"default behavior" be for WiFi network connections?

    I Have been able to at least temporarily fix the plethora of problems encountered after downloading Mountain Lion to my 2009 17" MBP just ten days ago.  Thanks to the time and effort of so many posters that are much more savvy than me, I successfully executed the steps suggested in many of the posts and with good results.  It surely beats running down to the Apple store and being told that I am the only one with a problem.
    Okay,  I've  realized that I don't really know what the default behavior of the WiFi network connection should be? 
    Specifically:
    Should the Wi-Fi drop down in Network always be" looking for networks", even though I am obviously on my Network?
    Should the Wi-Fi be connected at all times even when your computer is in sleep mode- or deep sleep mode?  There have been so many problems with Wi-Fi dropping off,slow or hanging loads, etc.
    I unchecked "ask to join networks, in Network preferences thinking it might stop looking for networks when it doesn't need to because I'm already on mine.  I do see my neighbors (four neighbors) in the drop down in Network. 
    How do you get into Time Capsule's settings, to check speeds, especially ping?  What should the ideal settings be?
    How do you know if your DHCP license is renewed? I've heard that feature isn't working and may be the culprit to some of the Wi-Fi problems.
    I'll look forward to your help in understanding more about this.  I've been in the support  area a lot lately, I've read plenty of definitions, and explanations of the different options to choose from in Apple's support area, but nowhere have I seen anything that explains what the default behavior should be or perform  like. 
    Thanks, as always.

    Generally, you don't want to tweak the wifi settings. It pretty much takes care of itself. The caveat to that is, of course, if you're experiencing problems.
    The 'looking for networks' behaviour only happens when you log in, wake the mac from sleep OR when you click on the wifi icon. You clicking on it tells the mac  "I want to see what networks are available" - so it does a scan for you to check to see if any new networks have appeared since you last clicked on it (or woke/logged in). In short, if you don't want it to look for new networks, don't click on the icon!
    Unchecking the 'ask to join networks' option only applies when your mac detects a new network (such as when it wakes) that you haven't already authorised; it'll ask you to confirm whether you want to join it or not. Otherwise, if the network is open it'll join automatically. You should keep this selected if you travel around with your Mac. It's a good idea to know what network you're on before you start plugging in passwords or typing other things into the mac.
    There is a utility that you can use for ping and traceroute called 'Network Utility'. Click on the Spotlight icon in the top right of your screen and type "Network' and you should see it at the top of the list. Hit 'return' to open it.
    DHCP licences are normally renewed automatically by your router every 24 hours. Again, there's no reason to be messing about with that unless you're experiencing problems.
    If you're experiencing wifi dropout, let us know, and we'll make some suggestions, but if you're not, you're best leaving your mac to manage the background processes. It knows what it's doing!
    Message was edited by: softwater

  • What should the settings in Preview be if scanning documents and the faxing them

    I'm trying to scan documents using preview and my printer. Once I scan the documents, I save them in dropbox and later fax them using SFax. However, the faxes are coming out blurry and very difficult to read. What should the Preview settings be on? PDF? File Format? How many dots per inch? What are standard settings?

    I am a recently retired webmaster and fortunately have fewer eye problems than most people my age. I have astigmatism and, in common with most people over 40, have reduced accommodation. Perhaps because I have spent considerable time in front of computer screens my eyes focus most easily at screen distance. I use low power long distance glasses to watch television and drive after dark. I use low power reading glasses for small print such as maps and repairing small items. Most of the time I don't need glasses.
    There is no such thing as standard settings for font size or style. It is entirely a matter of personal preference.
    Here are my settings:
    34cm x 27cm Apple Studio Display set to millions of colours and a resolution of 1280 x 1024
    Safari 'standard' font set to Geneva 14
    Safari fixed width font set to Courier 14
    Default encoding set to Western (ISO Latin 1)
    Minimum font size set to 10
    Geneva is a very old Apple font optimised for screen use. I still find it more readable than other fonts under a wide range of conditions.
    I assume you know about Zoom settings to override the above:
    cmd + to increase size
    cmd - to decrease size
    cmd 0 to return to 'normal' size
    I set 'Zoom Text Only' on the view menu.
    You can also create your own style sheet to obtain even more control. Here is a Google search link about these:
    https://encrypted.google.com/search?q=browser+%27style+sheet%27+%27visually+impa ired%27&as_qdr=all&newwindow=1&num=100
    I have written many style sheets but not for visually impaired. I am happy to assist if required.

  • What should the default tablespace be for SAP users

    I'm using Oracle 10.2.0.4
    For the users
    OPS$<SID>ADM
    OPS$ORA<SID>
    SAP<SID>
    what should the default tablespace be
    PSAP<SID>USR or PSAP<SID>

    Hello Bill,
    > For the users
    > OPS$<SID>ADM
    For this user the default tablespace is SYSTEM
    > OPS$ORA<SID>
    For this user the default tablespace is SYSTEM
    > SAP<SID>
    For this user the default tablespace is PSAPPRDUSR
    Regards,
    Federico Biavati

  • Recording external synth/drum machine - What should the highest peak be?

    Hi,
    When recording the audio from an external synth/drum machine what should the highest peak be? At the moment I have been recording as loud as possible without clipping but is it better to leave a few DB of headroom if using compressors etc afterwards?
    Thanks for the help.

    It is good practice with all audio tracking to have it peaking at around -6. I sometimes aim for around -9 when tracking.
    make sure you are recording at 24bit. Your peeks can be -18 and you wouldn't suffer too much.

  • I have receive my new ipad 2 last wek and found scratched behind.what should the steps to cliam at JB area

    I have receive my new ipad 2 last wek and found scratched behind.what should the steps to cliam at JB area

    The iPad was sealed in the box when I got it. It had the plastic screen protector wrapped all around it and when I powered it on for the first time it displayed the "connect to iTunes for setup" message displayed. The only other thing I can think of is if the person I bought it from had ordered it through Verizon on and the iPad was set up on a number on his pre-existing verizon account. My question is should I just keep using it and consider myself lucky? Since there is no way for Verizon to charge me for the usage because I never signed a contract. I realize that if it is on the account belonging to the person I bought it from, they will eventually figure this out and shut it off. But I might as well use it in the meantime right?

  • What should the multicast rate be set at?

    what should the multicast rate be set at in the wireless options box?
    mine was set at the default of 6 Mbps but could be set higher: 9, 12, 18 & 24Mbps.
    Any care to explain what it does?
    Regards Simon

    That sets the minimum date rate which is valid for a connection. If a connection can't maintain that rate, the connection will drop.
    A side effect of setting it higher is that your usable range will decrease. You will need to be closer to the base station to maintain a higher data rate.

  • My sound no longer works on my Apple 5c cell phone.  What should the settings be?

    My sound no longer works on my phone.  What should the settings be?

    What do you by "what should the settings be?  Volume is either up or down.

  • What Should the template form have ?

    What Should the template form have ?
    Object Library ; which has the most common used inherited triggers ?
    and ???
    Regards,
    Abdetu...

    If you look at the form of the standard object library (OFGWEBOL.fmb) you will see that there is no code (except for a few program units). The OL is really meant for look and feel kind of stuff.
    Also, it is far easier to maintain code in a pll library.

  • What should the WIFI download spped of the ipad be?

    What should the WIFI download speed of the ipad be?

    I'm running a 12 MGPS DSL connection and get pretty much the same download performance on all devices. Upload speeds seem to favor the Mac Book, but only slightly.
    But obviously this would be impacted by a number of factors, including the somewhat less powerful reciever on the iPad compared to the laptop.
    At any rate, speed on the iPad is more than adequate.

  • What are  the input parameters for Function Module

    Dear Experts,
    I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
    For that i want to write a Generic Datasource with Function Module.
    audat
    bukrs
    vkorg
    vtweg
    spart
    aurat
    auart
    netwr
    mwsbp
    kschl zedp(consition type)
    kschl zvat(condition type)
    ksch   zcst(condition type)
    matkl     material group
    Here what are the Input parameters for Function Module.
    Thanks in Advance.
    Srinivasan.

    Srinivasan-
    For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
    Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
    Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
    Let me know how it goes.
    -Bhushan.

  • Can any one say What are the mandatory parameters in BAPI_GOODSMVT_CREATE

    Hi,
    Can any one say What are the mandatory parameters in
    BAPI_GOODSMVT_CREATE.
    Helpful answer will be rewarded.

    Hi,
    The following is an abap program making used of the BAPI function BAPI_GOODSMVT_CREATE to do Goods Receipts for Purchase Order after importing the data from an external system.
    BAPI TO Upload Inventory Data
    GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
                         02 - MB31 - Goods Receipts for Prod Order
                         03 - MB1A - Goods Issue
                         04 - MB1B - Transfer Posting
                         05 - MB1C - Enter Other Goods Receipt
                         06 - MB11
    Domain: KZBEW - Movement Indicator
         Goods movement w/o reference
    B - Goods movement for purchase order
    F - Goods movement for production order
    L - Goods movement for delivery note
    K - Goods movement for kanban requirement (WM - internal only)
    O - Subsequent adjustment of "material-provided" consumption
    W - Subsequent adjustment of proportion/product unit material
    report zbapi_goodsmovement.
    parameters: p-file like rlgrap-filename default
                                     'c:\sapdata\TEST.txt'.
    parameters: e-file like rlgrap-filename default
                                     'c:\sapdata\gdsmvterror.txt'.
    parameters: xpost like sy-datum default sy-datum.
    data: begin of gmhead.
            include structure bapi2017_gm_head_01.
    data: end of gmhead.
    data: begin of gmcode.
            include structure bapi2017_gm_code.
    data: end of gmcode.
    data: begin of mthead.
            include structure bapi2017_gm_head_ret.
    data: end of mthead.
    data: begin of itab occurs 100.
            include structure bapi2017_gm_item_create.
    data: end of itab.
    data: begin of errmsg occurs 10.
            include structure bapiret2.
    data: end of errmsg.
    data: wmenge like iseg-menge,
          errflag.
    data: begin of pcitab occurs 100,
            ext_doc(10),           "External Document Number
            mvt_type(3),           "Movement Type
            doc_date(8),           "Document Date
            post_date(8),          "Posting Date
            plant(4),              "Plant
            material(18),          "Material Number
            qty(13),               "Quantity
            recv_loc(4),           "Receiving Location
            issue_loc(4),          "Issuing Location
            pur_doc(10),           "Purchase Document No
            po_item(3),            "Purchase Document Item No
            del_no(10),            "Delivery Purchase Order Number
            del_item(3),           "Delivery Item
            prod_doc(10),          "Production Document No
            scrap_reason(10),      "Scrap Reason
            upd_sta(1),            "Update Status
          end of pcitab.
    call function 'WS_UPLOAD'
      exporting
        filename                      = p-file
        filetype                      = 'DAT'
    IMPORTING
      FILELENGTH                    =
      tables
        data_tab                      = pcitab
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      OTHERS                        = 6
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
              with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      exit.
    endif.
    gmhead-pstng_date = sy-datum.
    gmhead-doc_date = sy-datum.
    gmhead-pr_uname = sy-uname.
    gmcode-gm_code = '01'.   "01 - MB01 - Goods Receipts for Purchase Order
    loop at pcitab.
      itab-move_type  = pcitab-mvt_type.
      itab-mvt_ind    = 'B'.
      itab-plant      = pcitab-plant.
      itab-material   = pcitab-material.
      itab-entry_qnt  = pcitab-qty.
      itab-move_stloc = pcitab-recv_loc.
      itab-stge_loc   = pcitab-issue_loc.
      itab-po_number  = pcitab-pur_doc.
      itab-po_item    = pcitab-po_item.
      concatenate pcitab-del_no pcitab-del_item into itab-item_text.
      itab-move_reas  = pcitab-scrap_reason.
      append itab.
    endloop.
    loop at itab.
      write:/ itab-material, itab-plant, itab-stge_loc,
              itab-move_type, itab-entry_qnt, itab-entry_uom,
              itab-entry_uom_iso, itab-po_number, itab-po_item,
                                                  pcitab-ext_doc.
    endloop.
    call function 'BAPI_GOODSMVT_CREATE'
      exporting
        goodsmvt_header             = gmhead
        goodsmvt_code               = gmcode
      TESTRUN                     = ' '
    IMPORTING
        goodsmvt_headret            = mthead
      MATERIALDOCUMENT            =
      MATDOCUMENTYEAR             =
      tables
        goodsmvt_item               = itab
      GOODSMVT_SERIALNUMBER       =
        return                      = errmsg
    clear errflag.
    loop at errmsg.
      if errmsg-type eq 'E'.
        write:/'Error in function', errmsg-message.
        errflag = 'X'.
      else.
        write:/ errmsg-message.
      endif.
    endloop.
    if errflag is initial.
      commit work and wait.
      if sy-subrc ne 0.
        write:/ 'Error in updating'.
        exit.
      else.
        write:/ mthead-mat_doc, mthead-doc_year.
        perform upd_sta.
      endif.
    endif.
          FORM UPD_STA                                                  *
    form upd_sta.
      loop at pcitab.
        pcitab-upd_sta = 'X'.
        modify pcitab.
      endloop.
      call function 'WS_DOWNLOAD'
        exporting
          filename                      = p-file
          filetype                      = 'DAT'
    IMPORTING
      FILELENGTH                    =
        tables
          data_tab                      = pcitab
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      OTHERS                        = 6
    endform.
    *--- End of Program
    Reward for useful answers.
    Regards,
    Raj.

  • What are the default parameters for PER_EVENTS api

    Dear Experts,
    Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
    procedure create_event
    (p_validate in BOOLEAN default FALSE
    ,p_date_start in DATE
    ,p_type in VARCHAR2
    ,p_business_group_id in NUMBER default NULL -- HR/TCA merge
    ,p_location_id in NUMBER default NULL
    ,p_internal_contact_person_id in NUMBER default NULL
    ,p_organization_run_by_id in NUMBER default NULL
    ,p_assignment_id in NUMBER default NULL
    ,p_contact_telephone_number in VARCHAR2 default NULL
    ,p_date_end in DATE default NULL
    ,p_emp_or_apl in VARCHAR2 default NULL
    ,p_event_or_interview in VARCHAR2 default NULL
    ,p_external_contact in VARCHAR2 default NULL
    ,p_time_end in VARCHAR2 default NULL
    ,p_time_start in VARCHAR2 default NULL
    ,p_attribute_category in VARCHAR2 default NULL
    ,p_attribute1 in VARCHAR2 default NULL
    ,p_attribute2 in VARCHAR2 default NULL
    ,p_attribute3 in VARCHAR2 default NULL
    ,p_attribute4 in VARCHAR2 default NULL
    ,p_attribute5 in VARCHAR2 default NULL
    ,p_attribute6 in VARCHAR2 default NULL
    ,p_attribute7 in VARCHAR2 default NULL
    ,p_attribute8 in VARCHAR2 default NULL
    ,p_attribute9 in VARCHAR2 default NULL
    ,p_attribute10 in VARCHAR2 default NULL
    ,p_attribute11 in VARCHAR2 default NULL
    ,p_attribute12 in VARCHAR2 default NULL
    ,p_attribute13 in VARCHAR2 default NULL
    ,p_attribute14 in VARCHAR2 default NULL
    ,p_attribute15 in VARCHAR2 default NULL
    ,p_attribute16 in VARCHAR2 default NULL
    ,p_attribute17 in VARCHAR2 default NULL
    ,p_attribute18 in VARCHAR2 default NULL
    ,p_attribute19 in VARCHAR2 default NULL
    ,p_attribute20 in VARCHAR2 default NULL
    ,p_party_id in NUMBER default NULL -- HR/TCA merge
    ,p_event_id out nocopy NUMBER
    ,p_object_version_number out nocopy NUMBER
    );

    From the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts.

  • What are the Admin Parameters in Weblogic server?

    What are the Admin Parameters in Weblogic server?

    Hi,
    Can you explain what specifically are you looking for? Are you looking for parameters to weblogic.Admin command or something else?
    Anil

Maybe you are looking for