"To" information is missing!

Help! I don't know how to describe this exactly, but my "to" information is missing on incoming my emails.
For instance, incoming mail message area displays "From" "Subject" "Date" and that's it!
Also, if I display the "To" column in column view, most often it's blank!
So, when I click on Reply All, it only replies to the sender, there is no info about who else the mail was sent to!
Big problem for me!
When I display long headers, there is no "to" header.
Can anyone help me?
Is something in mail stripping my "to" header? Is there any way an errant Apple Script could be doing that?
Or is something external (like my earthlink mail server) stripping the "To" header?
Please let me know if anybody has any suggestions.
Thanks!
David

Similar Messages

REJECT_CODE Vendor information and/or Operating Unit information is missing

hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY          ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE     =SYSDATE ,
CREATED_BY     ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG     = 'Y' ,
ATTENTION_AR_FLAG     = 'N' ,
ADDRESS_LINE1     ='gmmm df' ,
ADDRESS_LINE2     ='gmmm dfdv' ,
ADDRESS_LINE3     ='gmmm dfvdd' ,
ADDRESS_LINE4     ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS     ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID     = '1365' ,
PREPAY_CODE_COMBINATION_ID     = '1470' ,
PAYMENT_PRIORITY     = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE     = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE     ='JMD' ,
PAYMENT_CURRENCY_CODE     ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG     ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT     = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!

Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH

Vendor information and/or Operating Unit information is missing.

Hi,
I am new to the interface and learning programing can any body pls help me on this accept i will be thank full
I am running AP_SUPPLIER_SITES_INT and i got an error as
Vendor information and/or Operating Unit information is missing.
and also pls give me the diff b/w org_id and operating unit why the tables end with _all.
Thanks in advance
Thanks and regards
Goutham
Message was edited by:
goutham konduru

check out these:
http://www.oracleappshub.com/oracle-application/_all-tl-vl-vf_vl_a_avn-and-what-else/
http://www.oracleappshub.com/beginner/understanding-multi-organization-structure-in-ebs-part-1/

I recently upgraded my iPhone 4 with iOS 5 and ICloud. My Contact information is missing phone numbers. What is my fix?

I recently upgraded my iPhone 4 with iOS 5 and ICloud. My Contact information is missing phone numbers. What is my fix?

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.

External Handling Unit (Barcode) Information is Missing

Hello Folks,
I got a requirement where a warehouse will send us an EDI 945 file to confirm the shipment completion. But, it send us the file without SSCC labels for those shipped items of the order. This 945 is being translated into a SHPCON IDOC(DELVRY03) which doesn't contain the E1EDL37(Handling unit header). This IDOC is failing in status 51 with the error message: External Handling Unit (Barcode) Information is Missing.
What should be done to get this IDOC posted sucessfully even if it doesn't contain the SSCC label? Is there any setting that should be changed for this customer to not to look for SSCC labels(External Handling unit).
Thanks for your help,
Siva

This could be because of custom code. Check the exits in inbound FM and you should find out the root cause. Standard SAP doesn't check for customer level SSCC checks. If it gets the HU's from 3PL, it'll pack it such way. If it doesn't, it'll pack is the usual way.

Page footer information is missing for the first page alone.

Hi All,
After exporting to text format, Page footer information is missing for the first page alone. Any reasons?
Thanks for any help !!
Rgds,
Shriram

If you search the Business Objects Articles (see the link to the left on this page) for Export Limitations documents you'll see that page footers/headers are not supported when exporting to Text format (same for Page N of M.
If you open up a text file in Notepad - you'll notice that there is no Insert | Page Break (as there is in MS Word).
CR can't possibly know in advance where the page breaks will occur in a text document (or the application in which the document is opened) so most anything in CR having to do with pagination is not supported when exporting to Text.
The Export Limitations document is a handy item if you do a lot of exporting.

WUC-17 Information was missing from the supplied file download request java

Dear Forms Guru,
Can anybody help why i'm receiving this error using webutil.
WUC-17 Information was missing from the supplied file download request java..
the result in my jinitiator console are the ff:
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/webutil.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/webutil/jacob.jar from JAR cache
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading WebUtil Version 1.0.5 Production
Loading http://oracleserver.hfgmgroup.hfgm:8889/forms90/java/toolbar_images.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
2005-Feb-13 01:48:19.514 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:33.504 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
2005-Feb-13 01:48:34.04 ERROR>WUC-17 [VBeanCommon.downloadFromURL()] Information was missing from the supplied file download request java.net.MalformedURLException: unknown protocol: c
Many thanks in advance...
benjie

Benjamin,
WebUtil tries to download the jacob.dll to the client. The error message you get is most likely caused by teh following section in teh webutil.cfg file
install.syslib.location=/webutil
## Do not change the following lines unless instructed to do so
install.syslib.0.7.1=jacob.dll|94208|1.0|true
install.syslib.0.9.1=JNIsharedstubs.dll|65582|1.0|true
install.syslib.0.9.2=d2kwut60.dll|192512|1.0|true
## But you can add your own libraries in here
#install.syslib.0.user.1=testwebutil.dll|204872|1.0|true
If you have all these files available on the PC, then most likely the problem can be found in the virtual path setting for this directory
<virtual-directory virtual-path="/webutil"
real-path="c:/webutil/lib" />
in /j2ee/Oracle9iDS/application-deployments/forms/forms90web/orion-web.xml
Pleae refer to the webutil documentation for teh exact configuration steps.
Hope this helps
Frank

Personal Information nodes missing in ECC 6.0

Hi,
Personal Information nodes missing in ECC 6.0
SAP HR Highest Level Support SAPKE60003
EA HR SAPKGPHD03
What may be the reason.
Note: Points will be rewarded immediately.
Kiran

Hello,
thank you so much.
I think that there is not soultion. SAP told me:
Dear Maria ,
You have set the Maximum period, Minimum remaining shelf life and
Total shelf life as zero. I tested this on our internal test system
and when these are all set to zero the fields PROD & SLED are not
visisble in the Material tab in tcode MIGO.
The shelf life is only checked when you enter a goods receipt if the
following prerequisites are met :-
1.The minimum remaining shelf life is maintained in the material master
record or in the purchase order. The minimum remaining shelf life is theminimum number of days for which the material must keep for the goods
receipt to be accepted by the system.
2.The shelf life expiration date check is active for the plant and
movement type in Customizing for Inventory Management.In the
transaction SPRO,if you check in SAP Reference IMG
Material Management > Inventory management and Physical Inventory
> Goods Receipt > Set Expiration date Check,the SLExp/prDt field
is checked for plant and material movement
Regards

HT4623 I completed the ios update but now my contact information is missing?

I completed the ios update but now my contact information is missing?

Your contacts will be in whatever program you have chosen to sync.

Seed_Database.dfb containing the datafiles information is missing

Hello All,
I installed Oracle 11g R2 on an HPUX server
While i am trying to create a database using the dbca, it fails because of this error: the file Seed_Database.dfb containing the datafiles information is missing.
Your help pls. what is the solution?
Regards,

Hello,
I also have this problem. I downloaded the win64_11gr2_database_1of2 and 2of2.zip files 3 more times. I also tried downloading the linux versions along with version 11.1.0.6.0. I have searched the files in all cases for the Seed_Database.dbf and did no find it. Why do you suppose that after all of those downloads, from the Oracle download site, I would still not be able to locate the file? I certainly would like a reasonable explanation and a solution. I am running a windows 7 os but I am the administrator on this PC.
Thanks,
John

I type information on a form and submit. I get an error message that the information is missing even though I see it on the form. How can I resolve this problem?

I type information on a form and click submit. I get an error message that states that the information is missing even though I see it on the form. (Error message: Please type valid first name). How can I resolve?
== URL of affected sites ==
http://https://ushsbc71.recruitmax.com/MAIN/CareerPortal/candidate_update.cfm?szOrderID=88393&szCoverLetter=yes

Please see [[Use the Adobe Reader plugin to view or download PDF files]]

Xsi:type information is missing after Marshalling in JAXB

Hi,
I'm trying to mock the webservice, i have created classes for schema using JAXB (without any customization) and it's working. But when i try to marhsall my objects , it doesn't generate the xsi:type information of any element and attribute. I want this information since my webservice client needs this information.
I have tried to use mapSimpleTypeDef ="true" generateElementProperty="false" but it doesn�t help.
Following is output of marshal process
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<MessageRetrieveResponseReturn xmlns:java="java:types.api.brokerapi.soap.mms"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <return>
     <APIVersion>1.0</APIVersion>
     <ErrorCode>1000</ErrorCode>
     <ErrorInfo> Success</ErrorInfo>
     <BillingInfo xsi:type="java:BillingInfoObject" xsi:nil="true"/>
          <HeaderInfo xsi:type="java:HeaderInfoType" xsi:nil="true"/>
          <Content xsi:type="java:MessageContentType" xsi:nil="true"/>
          </return>
</MessageRetrieveResponseReturn>
I want output to be look like following
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<MessageRetrieveResponseReturn xmlns:java="java:types.api.brokerapi.soap.mms" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <return xsi:type="java:MessageRetrieveResponse" >
     <APIVersion xsi:type="java:apiVersionType">1.0</APIVersion>
     <ErrorCode xsi:type="xsd:string">1000</ErrorCode>
     <ErrorInfo xsi:type="xsd:string">Success</ErrorInfo>
     <BillingInfo xsi:type="java:BillingInfoObject" xsi:nil="true"/>
          <HeaderInfo xsi:type="java:HeaderInfoType" xsi:nil="true"/>
          <Content xsi:type="java:MessageContentType" xsi:nil="true"/>
          </return>
</MessageRetrieveResponseReturn>
I'm new to JAXB. Please let me know what I�m missing here
Regards

Not got a single answer , surprise whether the question is too dumb to ask or JAXB doesn't support feature or my requirement is weird :-) ... in any case let me know please
regards

Firefox jumps to the right on opening page so that half of information is missing.

When I open FireFox browser in order to access a website or email, the information on the screen jumps to the right, thus I can only see half of the page and the left half of my screen is blank. I have managed to get round this by using Full Screen, but then parts of the Tool Bar (or is it the Menu Bar? The one at the top of the screen) and all the Task Bar are missing. This happened after I had downloaded Firdox5 last week and also the latest update from McAfee. Does anyone else have this problem and how can I correct it? Also, McAfee Site Advisor no longer works with FireFox5 and I have to use Internet Explorer where the Site Advisor is working.

I'm using Firefox as my browser and the email may say Yahoo Mail, but I get the package from Firefox. Fortunately, I clicked some email link on the menu and miraculously the calendar appeared. Firefox may not take responsibility for the email, but if the email is in the Firefox package, I attribute the email responsibility to Firefox.

Information is missing when I save responses as PDF forms

When I save a response as PDF, I only get 3 pages from the filled in response. While it should be 9 pages. One of the tables doe not continue on the next page. How can download the response exactly in the format form the design? Now I'm missing to much information.

Hi Emma;
I am pretty sure that what you need to do for all of the content to fit properly in PDF is to use the "Page View" setting/mode on the Design tab (default view is "Web View" for web forms) and edit the content in that view to "fit". The "Page View" view mode is to design/tweak the form to work in PDF, the changes made in "Web View" are still there including all features not supported in a PDF, but any Page Breaks added in either view are unique to that view, if you add a Page Break in Web View you will not see that in the PDF or Page View, if you add a Page Break in Page View it is only used in the PDF.
If you were to have used the "Save Submission Enabled PDF" button on the Distribute tab you would have seen an error that the content does not fit and it would have taken you into "Page View" on the Design tab where it would show you the content that would be cropped in a PDF. We'll address the issue that this error does not come up when saving the response as a PDF form.
The view drop down selector is in the bottom right corner in the Design tab:
There are a few things you can do in Page View to get the content to work in PDF but not change the HTML/web form too much. You can of course add page breaks, and you can break up large form fields, but you can also simply change the font size to get things to fit sometimes, or go into "File" - "Form Setup" and change the page size which will only affect the PDF and not the web form, a larger page will fit more content.
Hopefully this helps but let me know if this was not the solution to your form.
Thanks,
Josh

Require that this column contains information is missing

I've got a Risks List on SharePoint 2007, as part of Project Server 2007 ,within which there is a column that I want to change its status to “required”. I went to Settings --> List Settings,
under Columns I clicked on the column name to edit. But under the Additional Column Settings, I don't see the option to "Require that this column contains information".
Why is this option missing?
In other environments we have, we were able to change the column designation with no problem and also in other lists in the same environment this
possibility appears.
Royg

Hi Royg--
1.     go to “List settings” > Advanced Settings and check “yes” of “allow management of content types” then click “OK”
2.     On list setting page, find the field in the “Columns” and check this field is used in which content type.
3.     Click the content type name in which this field is used on list settings page.
4.     Click the field name in “Columns” on this “List content type” page
5.     Now you can change the column to be “Required” in “Column Settings” option.
Hope that helps.
If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”. Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82

"To" information is missing!

Similar Messages

Maybe you are looking for