To install oracle 9i on Suse 10

Hi,
I want to install oracle 9i on Suse 10.
Can i install?
Do i need download any patches?(What are patches?)
I dont have cd's also.
So what should i do?
Regards,
Chaitra

Yet another useful link
http://dbis.informatik.uni-freiburg.de/content/courses/SS06/Praktikum/Programmierung%20in%20SQL/oracle-linux.html

Similar Messages

Error when Installing Oracle XE on Suse Linux 10.0

I am installing Oracle xe on Suse Linux 10.0.
I get following error.
gthomas@linux:~/oraclexe> rpm -ivh oracle-xe-10.2.0.1-0.1.i386.rpm
error: cannot get exclusive lock on /var/lib/rpm/Packages
error: cannot open Packages index using db3 - Operation not permitted (1)
error: cannot open Packages database in /var/lib/rpm
Please help
George

I found another thread in this forum where you can look up how to extend your swap space (look at the bottom of that thread):
re:Out of swap space during 9iAS install.
I am very new to Linux, I am very much disappointed,
I installed Linux with lots of hopes that I can
Install Oracle tools easily on Linux and work
comfortably. Now If I cannot intall a small database
Oracle XE, even with 1GB Ram and 25GB harddrive on
Linux, I don't realize why people run for Linux.
I could Oracle XE on windows on a machine with 512
mb ram in 4 minutes.Maybe you should take into consideration that you are not so "new" to windows and that each new system has a learning curve.
Someone please help.. in detail. How to resize the
swap partition at this point.Look in the provided link.
I have very limitted or no knowldge in Linux.Maybe you should change that or stay with what you know. I don't see any other way ...
As a sidenote, each command under Linux does have a so called "man" page (from manual). You also need to open a shell to access those commands as shown in the thread.
And please, take a look at the commands in that thread before you start implementing, since for example the dd command seems only to create a file with a size of 512M.
Knowing how to use a search engine would also be a valuable asset in your current position.
C.

Help in installing Oracle Xe in suse 10.2

I have successfully installed Oracle XE in suse linux 10.2.(my laptop)
The place I had installed had a Lan network available.
Now I usually work in a location where there is no network.
after I get the message that oracle XE is succesfully installed, I tried to open the oracle home page, but i was getting an error, that there is no network,
I followed the instructions to give no proxies for my oracle home page address, etc.but to no avail.
Can someone help me in this.
Do reply to [email protected] incase you need more information, or reply to this thread.

Ok..
This is not a network issue at all..
I am unable to connect to oracle even though there is network..
I was wrong.
Now here is the scenario..
I downloaded the rpm for oracle XE
i ran this command
rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
then i ran the command for configuring
$ /etc/init.d/oracle-xe configure
gave the default settings
then I went to
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
and from there ran the script file
. ./oracle_env.sh
the instruction says....
You may also want edit your login or profile files so that these environment variables are set properly each time you log in or open a new shell.
For Bourne, Bash, or Korn shell, enter the following line into the .bash_profile (to log in) or .bashrc file (to open a new shell):
. /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
For C or tcsh shell, enter the following line into the .login file (to log in) or .cshrc file (to open a new shell):
source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.csh
Where do I find the .bash_profile file in suse 10.2?
is this the final step to start working on my database...?
has anyone worked on this before?
It also says...
You can find the database creation logs in $ORACLE_HOME/config/log/*.
I cant find this path in my system...
Someone help me..

Installing Oracle 8i on Suse 6.3

I am trying to install Oracle 8i on Suse, and having problems.
When i do:
oracle@linux:/cdrom/install/linux > ./runInstaller
bash: ./runInstaller: Permission denied
I am keep getting the error!

Try SuSE 7.0. Works out of the BOX.

How to install oracle 10g on suse linux

Hi,
can anybody let me kbow how to install oracle 10.2 on suse linux.....
i have installed suse linux but couldn;t able to install oracle 10g on the same....
looking for gud suggestion.....

These two are good to start with
Installing Oracle Database 10g on SUSE Linux Enterprise Server 9 and on SUSE Linux Professional 9.1, 9.2, and 9.3
http://www.puschitz.com/InstallingOracle10gOnSUSE.shtml
Oracle Products on SUSE Linux Enterprise: Documents
http://www.novell.com/products/server/oracle/documents.html

Help to install oracle XE in suse linux 10.2

I have suse 10.2 installed in my laptop.
I downloaded the rpm for oracle XE and installed it by logging on as root
I ran the configuration to give 8080 as port etc.
Then i ran the ./.bash_profile script.
I am unable to login to sqlplus home page.
I am in a fix , as I seem to be missing something.
Using K menu/application and from there(graphical) when i say start database,
i get the message
Operation failed, root is not a member of 'dba' group.
I cant make sense out of this.
Can someone help me out.
if u need more info, do email me on [email protected]
or reply to this thread.

I have a Hp DV6000z laptop with the following config
AMD turion TL56 1.8GHz
2GB DDR ram
Nvidia Geforce Go7200 (256 MB)
a/b/g wireless with bluetooth
built in webcam
I had vista pre configured in my laptop.
I used Vista Boot pro to resize the partition.
I allocated 40GB hdd space for linux.
I installed Suse 10.2 and the OS works fine.
I wanted to install Oracle XE (Oracle 10g express edition) in my suse linux.
I was able to install Oracle XE in my vista, and it runs good.
#############I follwed the steps to install the rpm for oracle XE###
I logged in as root.
I downloaded the rpm for oracle XE from oracle website
i ran this command
rpm -ivh downloads/oracle-xe-univ-10.2.0.1-1.0.i386.rpm
then i ran the command for configuring
$ /etc/init.d/oracle-xe configure
gave the default settings(i.e port 8080 , password etc..
then I went to
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
and from there ran the script file
. ./oracle_env.sh
the instruction says....
You may also want edit your login or profile files so that these environment variables are set properly each time you log in or open a new shell.
For Bourne, Bash, or Korn shell, enter the following line into the .bash_profile (to log in) or .bashrc file (to open a new shell):
. /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
For C or tcsh shell, enter the following line into the .login file (to log in) or .cshrc file (to open a new shell):
source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.csh
Where do I find the .bash_profile file in suse 10.2?
is this the final step to start working on my database...?
has anyone worked on this before?
****************************************8
I found .bashrc in the home folder of the user vikram. I did not find .bash_profile
I added the line in the .bashrc file.
I also added root and vikram as members of dba group
When i run sqlplus and give username SYSTEM and password what I set.
I get the error message
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
the isqlplus webpage is not getting displayed either.
I dont seem to understand the problem.
further in instruction...
It also says...
You can find the database creation logs in $ORACLE_HOME/config/log/*.
I cant find this path in my system...
Using K menu/application and from there(graphical) when i say start database,
i get the message
Operation failed, root is not a member of 'dba' group.
I am unable to see the webpage for sqlplus, nor am i able to log in to sqlplus with sys or system as user name and password i provided
Has some one installed oracle, please tell me what I am missing.
email [email protected], or reply to thread, to help me out.
I am unable to de install oracle.
Can someone tell me how to do that as well.
I also need help in this regard.
I want to install graphics drivers for nvidia Geforce go7200.
please give steps to do so.
I want to install drivers/able to use my wireless card.
a/b/g wireless
I want to install drivers for my webcam.
Can someone tell me the fixes for my problems!!!
thanks in advance

Installing Oracle database on SUSE 10 SP 2

hi
Previously, I installed oracle database on Ubuntu and OEL 5, now I tried to install it on SUSE 10 SP2. I found that the path recommended for the installation is
/opt/oracle
while in others (Ubuntu and OEL 5) the was
/u01/app/oracle
My question is that why is this difference, if we install Oracle in /u01/app/oracle on SUSE will it give problems?
regards
RF

There's no difference between those folders
You can look for Oracle Managed Files for more information about how to manage your files
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/omf.htm#sthref1539
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

Problem with installing Oracle 10g on Suse Linux

Hi everybody!
I downloaded Oracle 10g Express from this url:
http://www.oracle.com/technology/software/products/database/xe/htdocs/102xelinsoft.html
it is free version for developers.
I copied it into computer where was installed Suse Linux Enterprise Edition.
But when I run it shows this kind of error:
error: rpmReadSignature failed: region failed: BAD, tag 15872 type 2047 offset 20480 count 4096
error: oracle-xe-univ-10.2.0.1-1.i386.rpm cannot be installed
It was downloaded without any problem. But checksum is different from that shown on website. I think this is the problem.
What is the problem? Does anybody know answer?
Regards,
Seti's fiction

Yes, you appear to have a bad copy.
I have not had a problem when the check sum matched. Therefore I encourage you to download again.

Install Oracle 10g on SUSE Enterprise 10

Hi,
I'm having some trouble with my Oracle installation and it would be great if someone could please point me in the right direction!
At about 62% into the install I receive the following error message:
Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2/db_1/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2009-08-10_08-49-40AM.log' for details.
The log file says:
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /opt/oracle/product/10.2/db_1/bin/genclntsh
INFO: /usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld: skipping incompatible /opt/oracle/product/10.2/db_1/lib/libxml10.a when searching for -lxml10
/usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../x86_64-suse-linux/bin/ld: cannot find -lxml10
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2/db_1/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2009-08-10_08-49-40AM.log' for details.
Exception Severity: 1
but it's unclear to me what's wrong and where I can obtain lxml10 from...
Advice greatly appreciated! Thanks!

Hi,
It seems that you are attempting to install a 32bit database version on a 64-bit Linux.
Please check your OS weather it is 32 or 64 bit using below command.
$ uname -m
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com

Install Oracle 10g on Suse Linux Enterprise Server 10

Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

Unable to install Oracle Developer Suite 10 on SuSe Linux 11.0

Hi all,
I have installed Oracle 11g on SuSe Linux 11.0 with no issues. I am unable to install Oracle Developer Suite10.12.02 on same (SuSe 11.0). The installation gets to about 94% and then fails with the following error:
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
Here's the actual (make failure) log entry:
gcc -o rwbuilder -L/home/oracle/app/product/11.1.0/ods//lib/ -L/home/oracle/app/product/11.1.0/ods/lib/ -L/home/oracle/app/product/11.1.0/ods/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386 -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/server -L/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/11.1.0/ods/reports/lib/ui10.o /home/oracle/app/product/11.1.0/ods/reports/lib/uiicxd.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsng.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwscl.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwssc0.o /home/oracle/app/product/11.1.0/ods/reports/lib/rwsdt.o -lrw /home/oracle/app/product/11.1.0/ods/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/11.1.0/ods/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/11.1.0/ods/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/11.1.0/ods/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/11.1.0/ods/lib,-rpath,/home/oracle/app/product/11.1.0/ods/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/11.1.0/ods/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/11.1.0/ods/lib -L/home/oracle/app/product/11.1.0/ods/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/11.1.0/ods/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
The only serious flaw I can see in the config is that I'm using libstd++ 4.3 instead of the requested 3.2.2 which 'should' be acceptable as it's a newer version - can anyone help please? Thanks in advance for any helpful advice anyone can offer.
Richard Foley
ps. What's also a bit odd, is that the overall exit status of the installation is regarded as succesful...
*** End of Installation Page***
The installation of Oracle Developer Suite 10g was successful.
Edited by: orafoley on Oct 14, 2008 5:19 PM

Hi Hub,
Done that, nothing:
$> env | grep -i LD
$>
On the off-chance that it had something to do with installing Oracle 11.0 with ODS Developer 10.0, I've rolled my database installation back too, so now I have:
Oracle 10.2.01
Oracle Developer Suite 10i (ODS 10.12.02)
SuSe 11.0
Now when I runInstaller I get this, which is surprisingly similar:
Start output from spawned process:
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librwu.so; \
rm -f /home/oracle/app/product/10.2.0.1/db/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
/usr/bin/gcc -o /home/oracle/app/product/10.2.0.1/db/lib//librwu.so -shared -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ rwsutil.o rwspid.o \
-lm /home/oracle/app/product/10.2.0.1/db/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
/usr/bin/ar x /home/oracle/app/product/10.2.0.1/db/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -o rwbuilder -L/home/oracle/app/product/10.2.0.1/db//lib/ -L/home/oracle/app/product/10.2.0.1/db/lib/ -L/home/oracle/app/product/10.2.0.1/db/lib//stubs -rdynamic -Bdynamic -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386 -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/server -L/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /home/oracle/app/product/10.2.0.1/db/reports/lib/ui10.o /home/oracle/app/product/10.2.0.1/db/reports/lib/uiicxd.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsng.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwscl.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwssc0.o /home/oracle/app/product/10.2.0.1/db/reports/lib/rwsdt.o -lrw /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lobx -lnn -lrws -lde /home/oracle/app/product/10.2.0.1/db/lib//libzrc.a -lrws -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /home/oracle/app/product/10.2.0.1/db/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /home/oracle/app/product/10.2.0.1/db/lib/ldflags` -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -Wl,-rpath,/home/oracle/app/product/10.2.0.1/db/lib,-rpath,/home/oracle/app/product/10.2.0.1/db/jdk/jre/lib/i386:/lib:/usr/lib -lm `cat /home/oracle/app/product/10.2.0.1/db/lib/sysliblist` -ldl -lpthread -lm -L/home/oracle/app/product/10.2.0.1/db/lib -L/home/oracle/app/product/10.2.0.1/db/lib/stubs/ -lsnls10 -lpthread -ljvm -lhpi -Wl,-rpath,/usr/X11R6/lib -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /home/oracle/app/product/10.2.0.1/db/lib//librw.a -lnsl
/usr/lib/libXtst.so.6: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/usr/lib/libXtst.so.6: undefined reference to `__fprintf_chk@GLIBC_2.3.4'
/usr/lib/libXtst.so.6: undefined reference to `__sprintf_chk@GLIBC_2.3.4'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
End output from spawned process.
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'libso_install bld_install proxy_install runm_install server_install cgi_install cli_install conv_install qv_install' of makefile '/home/oracle/app/product/10.2.0.1/db/reports/lib/ins_reports.mk'. See '/opt/oracle/oraInventory/logs/installActions2008-10-30_02-12-25PM.log' for details.
Richard.

Oracle 10g on SuSE 9 with kernel 2.6.4

Hi,
i have installed Oracle 10g on SuSE 9 Professional with kernel 2.4.21-192 and it works fine.
For testing purposes i have installed a 2.6.4 Kernel and get the following error on database startup:
SQL> Connected to an idle instance
SQL> ORA-27125: unable to create shared memory segment
Linux Error: 1: Operation not permitted
SQL> Disconnected
Do you have any hints or is the kernel 2.6 not supported.
Thanks Klaus

/* using strace I have narrowed this down to the shmget call for allocating SGA memory. Specifically 2.6 kernel generates a WAIT in this call and Oracle specify IPC_NOWAIT flag, hence the failure condition.*/
#include <sys/types.h>
#include <sys/shm.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <errno.h>
extern int errno;
#define SHM_HUGETLB 04000
#define SGA_SIZE 192937984
#define dprintf(x) printf(x)
#define ADDR 3285588844UL
main()
int shmid;
int i, j, k;
volatile char *shmaddr;
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_NOWAIT|IPC_EXCL|0660) )
< 0) {
perror("IPC_NOWAIT Failure:\nTry without NOWAIT condition");
if ((shmid = shmget(ADDR, SGA_SIZE, IPC_CREAT|IPC_EXCL|0660) )
< 0) {
perror("Failure:");
exit(1);
printf("shmid: 0x%x\n", shmid);
shmaddr = shmat(shmid, (void *)ADDR, SHM_RND) ;
if (errno != 0) {
perror("Shared Memory Attach Failure:");
exit(2);
printf("shmaddr: %p\n", shmaddr);
dprintf("Starting the writes:\n");
for (i=0;i<SGA_SIZE;i++) {
shmaddr[i] = (char) (i);
if (!(i%(1024*1024))) dprintf(".");
dprintf("\n");
dprintf("Starting the Check...");
for (i=0; i<SGA_SIZE;i++)
if (shmaddr[i] != (char)i)
printf("\nIndex %d mismatched.");
dprintf("Done.\n");
if (shmdt((const void *)shmaddr) != 0) {
perror("Detached Failure:");
exit (3);

Oracle 9i and suse 10.0

Hello everyone,
i have just been trying installing oracle 9i on sus linux 10.0, but whent i get on the first installer screen, the next button is not working (no action triggered) so as the exit button,
i can see some java exceptions in the console :
View passed to RootItemDataSource does not contain data in TopicTree format.
sun.io.MalformedInputException
also for :
View passed to KeywordDataSource does not contain data in TopicTree format.
sun.io.MalformedInputException
with loads of line containing classname and line numbers
on that point, all i can do is close the installer window by clicking ont he closing cross, clicking on 'about' button and uninstall other products
note that some line in the exceptions specify the message "unknown source"
how could i solve this problem ??

Hello,
perhaps this may help (from www.novell.com):
: buttons don't work
The NUMLOCK key on the numeric keyboard must be OFF when the installer is started or the Installer may not function correctly, like you cannot press any of the buttons. Cancel the installer, turn off NUMLOCK and restart the installer.

Error when Installing Oracle on Linux

Hi Guys,
Hope u guys can help. Im installing oracle 8 on suse 9 to perform a system copy (this is a target system). but stuck in phase linking Oracle 8 :
Error in invoking target install of makefile ../../ins_sqlplus.mk
when i tried to install it manually :
make -f ins_sqlplus.mk install, it came out an error that says libclntsh.so: undefined reference to '__ctype_toupper'
Any one can help me with this?
Thanks

Hi,
if you already looked at the PAM - i wonder why asking for such an OS related problem.
> So the only option I have is to update the OS and do the migration there.Is Oracle 9 backward compatible? i.e I copy the offline data (Oracle 8) to Oracle 9
If you just want to copy the oracle control-/datafiles, etc. - no it will not work. You have to do a normal oracle upgrade to get your Oracle 8i database running on Oracle 9i.
Regards
Stefan

Oracle Universal Installer Error when Installing Oracle database Software

Hi Guru's
we are installing SAP ECC 6.0 on Linux:Oracle, we start the installation fine until we reach the oracle software installation step. we login as ora<sid> then set the DISPLAY variable setenv DISPLAY 192.168.1.155:0.0
The csh shell is the one that is being used we find this after executing echo $SHELL, when we execute echo $DISPLAY it returns 192.168.1.155:0.0.
When we run ./RUNINSTALLER it then returns Failed the DISPLAY variable is not set correctly, to check if it working execute xclock, we run that and it displays the clock.
what could be the problem with this installation.

I am trying to install Oracle 10g on Suse Linux and I am getting the
following error...
Checking monitor: must be configured to display atleast 256
colors Failed <<<< >>>> could not execute auto check for display colors
using command /usr/X11R6/bin/xdpyinfo check if DISPLAY variable is set.
I checked the DISPLAY variable and it is set right.

To install oracle 9i on Suse 10

Similar Messages

Maybe you are looking for