To know how to add the elements present in the particular column
I have created the ALV report with two columns namely vbeln and ntgew.In that i want to add the values of ntgew column.plz provide the query to do that.
Edited by: Philip Eller on Jun 18, 2008 9:12 AM
hi vivek,
You posted the question in wrong forum.
There is a forum seperately for ABAP.
Jeyakanthan
Similar Messages
-
I am using I phone 4s, I wish to add my contacts from laptop to my Iphone. i tried different ways to sync. but not success. so pleaselet me know how to add the contacts to i cloud?
Are you using a PC or a Mac?
What application are the contacts in on your laptop? -
How to add the Assignment column on this post outgoing payment in f-53
Hi all,
how to add the Assignment column on this post outgoing payment in f-53?
thanks.
JooHi ,
If you want to see the assignment column in f-53 process open item screen
1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
then check in F-53.
Hopw it will solve your problem.
Assign points if useful
Regards
Prabhat -
How to change the particular column background color in jTable?
I am woking with a project, in which I am using a jTable. Then
How to change the particular column background color in jTable?Use a custom Renderer. This is the JTable tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/components/table.html -
How to add the particular hierarchy
Hai to all,
Today i got one incident that <b>pl add 288_TOTAL_IO hierachy to BW side.</b>, i actually dont know how to add it , (if i going to add how i have to proceede...ie whether i have to add the particular hierarchy on the D system and then i have to transport this to p).......
so pl give some suggesions regarding this.
i observed that this has to add to <b>0COORDER</b>it is already having the some other hierarchies.
Best Regards
Shyam/venkatHi,
Instead of checking in R/3 system.
Go to infopackage hierarchy - 0COORDER and in the selection you can see all the hierarchy.
based on your requirements select the hier. and load the data. Once it is successfull it will be available for reporting and under infoobject.\
hope it helps.
mahantesh -
Hi,
Im trying to download a movie from itunes to my ipad 2 but it says i dont have enough memory. I have 13G of space on icloud but cant figure out how to down load it to icloud. Can anyone advise please.Hi back,
Icloud cannot be used to increase internal memory of ipads, otherwise nobody would buy more expensive 32, 64, 128 gigabyte versions. Hype with "movies in the cloud" is more of itunes store, keeping movies available for you in order to download on any device. That does not go against your storage in the cloud, though.
So if you go to your computer and you purchased movie ( not rented ) you can download and watch.
There is something else to pay attention to, your ipad (if I am not mistaken) is not capable to run HD movies, make sure you do buy Standard Definition, and they will take less space on ipad. -
I would like to know how to add the following tcodes to a user
MC$6 PURCHIS, Vendor DelRelbty Selection
MC$8 PURCHIS, Vendor DelRelbty Selection
thank youHi
Create New role for your User in T.Code: PFCG...there,you assign these 2 t.codes in new role
then assign this new role to your user in SU01...
Get BASIS People help!
Reward if useful
Regards
S.Baskaran
Edited by: baskaran srinivasan on Jan 23, 2008 7:59 AM -
How to add the BPM column in iTunes 12.01?
This used to be easily done under View Options but is gone now. Is it somewhere else now or has this feature been removed? THX!
It is still there! See picture below. Start at the upper right, choose Show Columns, and click for "Beats Per Minute."
-
How to add the Note board web part to a page with powershell
Hi everyone,
I've been looking around everywhere but haven't seen it explicitly mentioned.
Does anyone know how to add the Note Board web part to a Team Site page, e.g. Non-publishing site, Left Zone, First webpart in the zone in powershell?
Examples like this one http://adicodes.com/adding-web-part-to-page-with-powershell/ only talk about custom web parts uploaded from a local drive.
The example here looks good - http://spcrew.com/blogs/lists/posts/post.aspx?id=21 but is it for the Page Viewer Web Part. How would you go about getting the correct name for the note board web part and configuring it?
Many Thanks,
Ashley
function main(){
[void][System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint")
$url = "http://sp2010dev1/sites/test1"
$OpenWeb = Get-SPWeb $url
$OpenWeb
$OpenSite = Get-SPSite $url
$file = $OpenWeb.GetFile("http://sp2010dev1/sites/test1/SitePages/test1.aspx")
$WebPartManager = $file.GetLimitedWebPartManager([System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
Add-PageViewerWebPart "http://sp2010dev1/sites/test1" "http://sp2010dev1/sites/test1/SitePages/test1.aspx" "Body" 0 "SPCrew Site" "sp2010dev"
$OpenWeb.Dispose()
function Add-PageViewerWebPart($SiteURL, $pageUrl, $webpartzone, $index, $title, $content)
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.WebPartPages.PageViewerWebPart
$webpart.ChromeType = [System.Web.UI.WebControls.WebParts.PartChromeType]::TitleOnly;
$webpart.Title = $title
$webpart.ContentLink = "http://www.spcrew.com";
$webpartmanager.AddWebPart($webpart, $webpartzone, $index);
$web.Close()
$site.Close()
function Get-SPSite([string]$url) {
New-Object Microsoft.SharePoint.SPSite($url)
function Get-SPWeb([string]$url) {
$SPSite = Get-SPSite $url
return $SPSite.OpenWeb()
$SPSite.Dispose()Hi,
According to your post, my understanding is that you wanted to add the Note board web part to a page with PowerShell.
The name of the Note Board web part is SocialCommentWebPart.
I recommend to use the powershell code below:
$pageUrl="http://sitename/SitePages/test.aspx"
$SiteURL="http://sitename"
$site = new-object Microsoft.SharePoint.SPSite($SiteURL)
$web=$site.OpenWeb()
$webpartmanager=$web.GetLimitedWebPartManager($pageUrl, [System.Web.UI.WebControls.WebParts.PersonalizationScope]::Shared)
$webpart = new-object Microsoft.SharePoint.Portal.WebControls.SocialCommentWebPart
$webpart.title="Note Board"
$webpartmanager.AddWebPart($webpart, "MiddleZone", 0);
$web.Close()
Then the Note board web part will be added to the page.
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
FInvoice How to add the SOAP frame thru XSLT transform
Dear All,
i have the following problem i have implemented as xslt codeto send data from SAP Idoc invoic to WS Finvoic .
the coding looking as following :
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format">
<xsl:output encoding="ISO-8859-1"/>
<xsl:template match="/">
<!-- Create SOAP-Envelope -->
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd">
<!-- Create Header Container -->
<SOAP-ENV:Header>
<eb:MessageHeader xmlns:eb="http://www.oasis-open.org/committees/ebxml-msg/schema/msg-header-2_0.xsd" SOAP-ENV:mustUnderstand="1" eb:id="">
<eb:From>
<eb:PartyId>
<xsl:value-of select="Finvoice/SellerOrganisationUnitNumber"/>
</eb:PartyId>
<eb:Role>Sender</eb:Role>
</eb:From>
<eb:From>
<eb:PartyId>
<xsl:value-of select="Finvoice//SellerBic"/>
</eb:PartyId>
<eb:Role>Intermediator</eb:Role>
</eb:From>
<eb:To>
<eb:PartyId>
<xsl:value-of select="Finvoice//InvoiceRecipientAddress"/>
</eb:PartyId>
<eb:Role>Receiver</eb:Role>
</eb:To>
<eb:To>
<eb:PartyId>
<xsl:value-of select="Finvoice//InvoiceRecipientIntermediatorAddress"/>
</eb:PartyId>
<eb:Role>Intermediator</eb:Role>
</eb:To>
<eb:CPAId>yoursandmycpa</eb:CPAId>
<eb:Service>Routing</eb:Service>
<eb:Action>ProcessInvoice</eb:Action>
<eb:MessageData>
<eb:MessageId>
<xsl:value-of select="Finvoice//SellerReferenceIdentifier"/>
</eb:MessageId>
<eb:Timestamp>
<xsl:value-of select="Finvoice//InvoiceDate"/>
</eb:Timestamp>
</eb:MessageData>
</eb:MessageHeader>
</SOAP-ENV:Header>
<!-- Create Body -->
<SOAP-ENV:Body>
<eb:Manifest eb:id="Manifest" eb:version="2.0">
<eb:Reference eb:id="Finvoice" xlink:href="1009">
<eb:schema eb:location="http://www.finvoice.info/yrityksen_verkkolasku/ladattavat/Tekniset tiedostot/schemat/Finvoice.xsd"/>
</eb:Reference>
</eb:Manifest>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
<!-- Add Finvoice msg. as Payload Container-->
<xsl:text disable-output-escaping="yes">
<?xml version="1.0" encoding="ISO-8859-15"?>
</xsl:text>
<xsl:text disable-output-escaping="yes">
<!DOCTYPE Finvoice SYSTEM "Finvoice.dtd">
</xsl:text>
<xsl:processing-instruction name="xml-stylesheet">type="text/xsl" href="Finvoice.xsl"</xsl:processing-instruction>
<xsl:copy-of select="*"/>
</xsl:template>
</xsl:stylesheet
My problem is that I don't know how to add the doctype part via xslt:
<?xml version="1.0" encoding="ISO-8859-15"?>
<!DOCTYPE Finvoice SYSTEM "Finvoice.dtd">
could sombody give me input concerning this
Thank in advace.
Best regards !Hi,
I don't know if I completely understand your requirements,
however, if you have the field DocType in your Idoc Structure Message, like follow:
<EDI34243 doctype="XXX"/>
You can use:
<xsl:value-of select="@doctype"/> -
Does anyone know how to add a preface page at the beginning of the book in ibooks author once the book is written? No matter how I try to add a Preface page, it goes to the end of the book.
Thanks. I've tried this and apparently the template I'm using is one of those where it doesn't work. I've tried dragging it as well as cutting a pasting but it always travels back to the end of the book. Maybe I can try changing the template temporarily, move the preface page, and then convert back to the original template. I'll experiment a little.
-
Hi
I am following below link to hide/show my columns dynamically. See "Column Formatting"
http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187.pdf
As per doc, element can be made private/public.
<items type="PUBLIC">
<item>
<name>Plasma TV</name>
<quantity>10</quantity>
<price>4000</price>
</item>
<item>
And same can be used to hide the column using condition
<?if@column:/items/@type="PUBLIC"?>
MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?
Below is part of my XML code which I am using in Data Definition for RTF.
<group name="GH3" source="QH3">
<element name="COLUMN_HEAD3" value="COLUMN_NAME" />
</group>
<group name="GH4" source="QH4">
<element name="COLUMN_HEAD4" value="COLUMN_NAME" />
</group>
I am getting output like this.
<LIST_GH3>
<GH3>
<COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
</GH3>
</LIST_GH3>
<LIST_GH4>
<GH4>
<COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
</GH4>
</LIST_GH4>
In order to use logic as per oracle document I want output like this.
<LIST_GH3 type="PUBLIC">
<GH3>
<COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
</GH3>
</LIST_GH3>
<LIST_GH4 type="PRIVATE">
<GH4>
<COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
</GH4>
</LIST_GH4>
What changes I need to make in my XML code to get the runtime output as above? Please help. Where do i need to make changes in the above xml? Group name? Element name?
I am planning to use below condition in RTF template to hide the column, but dont know how to set the type of column as PRIVATE/PUBLIC in the XML output used to populate data in the RTF at runtime.
<?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
Regards,
Swapnil K.Hi,
Issue has been resolved. I used the value of the element to determine to display it or not.
Regards,
Swapnil K. -
How to Add the Cost Element in Existing Zreport Painter
hi friends
i have issue with report painter
one Cost Element is not picked in Z Report which was created in Report painter
transaction data could be found in standard reports.
please expain how to Add the missing Cost Element in Existing ZReport
Point will be awarded.
ThanksCheck your sets first, if the cost element is missing from there, then change the set using GS02
Cheers
Prakash -
Hi anyone know where the contacts app in iphone 4s as i dont know how to add contacts
hi does anyone know why my iphone 4s has not set up a contacts app ive set it up as a new phone and dont know how to add contacts any help
Well, if you go to Phone, you'll see a contacts tab there on the bottom of the screen. It's also possible that it's in a Utilities folder on your home screen.
-
want to know how to add pictures to address book that DO NOT appear as fullscreen images on the iPhone but remain as icons with the iPhone background visible (see attached image). for some reason, all new contacts added through Mountain Lion appear as fullscreen caller ID images.
This would be better addressed in the iPhone forum, I would post there as well.
Maybe you are looking for
-
I am having a problem with a swf file that we are using for a splash page for a bands website. It is a simple page with some audio and two links. The problem I'm having is the font and the sizing of things changed after they were uploaded to the serv
-
HT1338 How can I get a copy of iWeb or a web building software like Iweb
How can I get a copy of iWeb or a web building software like Iweb
-
Setting up the months based on prompts.
Hi All, My requirement is that I am selecting the calender year(2009) and calender month(8) in the prompts I should be able to retrieve the previous month and previous to previous month in the per_name_month fashion that is (2009 /07) which I have to
-
When I insert a WinForm control in Word Document, I get this exception.
Hi All, Sometimes, when I insert a general Custom WinForm UserControl in Word Document, I receive this exception. It occurred as accidental. I traced this issue. And debug it. It occurred in this code snippet: var cs = vstoDoc.Controls.AddControl(Cus
-
How do I change the size of the words on the banner and tool bars? The words are so large that I cannot access all the options.