To know Reporting time

Hi,
I have one problem.One of reports are taking long time and there is performence problem.For that I have to modify update rule logic.I want to know howmuch time is taking for reports at front side and backend side and How to I know?Can anyone tell the procedure to find out?
Sridhar

Sridhar,
You can use technical content..
OR
Go to ST03N Tcode
Goto RSRT give the query name and see the technical property you will find the query generation time.
For the time taken for execution Select the execute and debug mode in the options select display statistics.
Execute the query
How to know the Query Execution time
Query Run time

Similar Messages

Report Time zone in Excel Template

Hi,
How can we display the TimeZone that is set in the BI Publisher Preferences. Is there anyway to display this timezone in Excel Template.
In RTF Template, 'm able to display it using ,
<?format-date:xdoxslt:sysdate_as_xsdformat();’dd-Mon-yy hh:mi:ss’?>, so whenever I change the Report Time Zone in BI Publisher , the output of RTF Template gets affected correctly.
But I have to do the same in Excel Template, Is there anyway to achieve this?
Thanks in advance

I found a way to display the parameter, but it shows the return value. Is there a way to show the display value as it is when submitting the report? For example i have a LoV as follows:
select test as display_value, 10 as return_value from dual and it is attached to a parameter. Then i define that parameter in the XDO_METADATA and display it to another sheet - it will display the return_value(TEST) ... Anybody knows how to output the display_value?
Thanks,
Alexander.

Discoverer Reporting time in Discoverer view /plus

Hi I am running reports in the Discoverer View. Some reports are taking more than expected time. I want to know exact time taken by the reports. IS there any tables that storing Execution time for Discoverer reports like start time and end time for the report.
Thanks.

Hi,
You can turn on statistics collection and then look in the EUL5_QPP_STATS table for the start time and duration of all the workbooks run on the system.
Rod West

EKKO+ RSEG : Report times out

Hi
What would be the most effetive way to check whether an purchase order has been invoice receipt(IR) and what the invoice document number is?
The report times out because i don't use the year and invoice document number when reading rseg. The link to rseg from ekpo or ekko is the purchase document number.
If i use rseg as a starting point you will not know in which year the purchase order has been (IR).

you better read the purchase order history table:EKBE.
Pass the purchase order number and its item.
Pass BEWTP eq 'Q', you will get the generated invoice document number.
later you can query RSEG with the document numbers found.

Lync 2013 Call Quality Reporting Time Intervals

Does anyone know the time interval used to report the metrics associated with the Lync 2013 call quality reports? If so, is there documentation that confirms that?
For example, Max Packet Loss Rate gives you a percentage. However, I haven't found any documentation that says how long a sample period is. Was that Max Packet Loss rate experienced for, at least, 1 second, 5 seconds, 30 seconds, 1 mintue etc?
I haven't found any conclusive information regarding how long of a period they may have experienced that max packet loss number, nor at what point during the call.
Thanks in advance for the help!

Hi,
The network health is expressed by the number of poor audio streams, where a poor stream is defined as having a packet loss rate over 1 percent and a maximum packet loss rate over 5 percent.
You can refer to the following two links to understand it easliy:
http://blogs.technet.com/b/jenstr/archive/2013/06/11/viewing-network-health-trends-using-qoe-data.aspx
http://blogs.technet.com/b/nexthop/archive/2012/12/10/troubleshooting-call-quality-locally-with-snooper.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Does anyone know what time the last episode of Breaking Bad starts streaming

Deos anyone know what time the last episode of Breaking Bad starts streaming on itunes?

A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.

Hyperion Performance Scorecard Default Reporting Time Change

Hi all,
I have to change the default reporting time for measures in the Browser view of HPS (Objects-> Measure ->
measure tabs Result & Target: defaultwise there is the time period setting of one year, so e.g. From 2/18/08 to 2/18/09).
I should extend this default time period to 2 years.
Does anyone know, how to change this?
Many thanks,
Dominic

Hi Dominic,
You have to edit the measure in Browser view Measure List -> Measure name -> General Tab in the desigber role.
Change the Frequencies for the measure.
Change the collection frequency as you required and give Collection Extension Days as much buffer time you want to give. Save it and it should reflect.
Note : Before changing it, you would have to take the backup using export utility. Change the frequency and Import the data again.
Hope this would be useful

HR and BW: Reporting Time Types. Any Experience?

Hi,
We are implementing BW for a client. In the HR component, instead of writing the usual custom extractors to get Quota, Absense and Time related data I would like to use the standard extractors: 0HR_PT_1, 0HR_PT_2 and 0HR_PT_3.
I know that we need to set up the Reporting Time Types, but to do this we need to get a HR Consultant in and none of the ones (6 now) have no experience in setting these up. The lowest quote we have had is 10 days work.
The other option is to run the transactions PDW1 and PDW2, but again I have found very little information on these again I have not found any consultants who have actually run them.
My questions is:
1) Has anybody run the transactions PDW1 and PDW2,and knows if they work, are there any downsides, and general thoughts on using either of these.
Thank you for your time and thoughts
David

If I remember...
To set up report times, any time type not include as reporting time type is not going to upload to BW. Check some OSS notes about this.
You first create a "group" the report times, inside this group you add the time types and especify if its measure is in days or hours.
In BW you will get the group, but not the time types included in it.

Reporting time type for 0HR_PT_2

Hi,
I am creating the reporting time types in ECC system, to extract it to BW.
I have always used "Attendance/Abscences Assignment"
I would like to know, in which scenario, we will use "Time Type Assignment" or "Wage types Assignment"
Thanks and Regards,
Suresh.

Hi,
Not sure, But if you check with HR team or functionals you may get helpful information.
its seenm like functional activity.
Thanks

Define Reporting Times 0HR_PT_2

Hallo Experts,
we us the datasource 0HR_PT_2, so we define reporting times for BW.
It already works for our main campany, but we have also a daughter-company. So we have the problem that one reporting time works for our company but not for the daughter company - have anyone an idea what we can do.
Thanks Santra

Hi Santra/Experts
We have similar problem. We have configured as required the reporting time types in SBIW of R/3. Even though there exists data in related infotypes of Time liek PA2001, PA2002, Pa2010 and cluster etc. We are not able to get data from the extrcator 0HR_PT_2 where it is tested in RSA3.
Can you please let me know Do we need to make any more configuration changes need to to get dat from the datasource 0HR_PT_2.
Cheers
Nagesh

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

How to define reporting time types for 0HR_PT_2 to populate records in rsa3

hi experts,
we are implementing Time and Labour and we are using info provider called 0PT_C01.
for that we have 2 data sources one is 0HR_PT_1 and 0HR_PT_2.
when i check in RSA3 there are records for 0HR_PT_1 Data source, but for 0HR_PT_2 data source it shows 0 records though the related info types have data.
i have checked in sdn for the solution, most of the replies are related to maintain Reporting Time Types.
can you please provide me step by step solution to maintain Reporting Time Types in ECC.
Regards
venuscm

Hi Venu,
You can maintain reporting time types in SPRO,
SPRO > Integration with Other SAP Components -> Data Transfer to the SAP Business Information Warehouse -> Settings for Application-Specific DataSources (PI) -> Human Resources -> Actual Employee Times OHR_PT_02 -> Define Reporting Time Types -> Maintain Reporting Time Types
Check with your HR team about maintaining reporting time types.
[http://help.sap.com/saphelp_46c/helpdata/fr/e8/cb2d28e4ded31184080004aca6e0d1/content.htm]
Regards,
Durgesh.

0HR_PT_2 How to get back historical data for new report time type

Hi All Expert,
We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
The delta doesn't pick up the the past whole year data of the new report time type that we added.
Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
Please advice and Thx
Ken
Edited by: Ken Hong on Feb 27, 2008 9:24 PM
Edited by: Ken Hong on Feb 27, 2008 9:25 PM

P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

From report server database how to know reporting services server

from report server database how to know reporting services server
Thanks

Hi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

Everytime I try to sync my mac calendar with icloud, the times get switched around and I can't retrieve them. Now I no longer know what time my appointments really are. I have to have my laptop with me in order to check my appointments?!

Everytime I try to sync my mac calendar with icloud, the times get switched around and I can't retrieve them. Now I no longer know what time my appointments really are. I have to have my laptop with me in order to check my appointments?! This is driving me crazy. Can anyone help me fix this problem?
Thanks!

I'm not sure what you mean by the times get switched around, but you migh check on both mac and device in the Time & Date section of preferences/settings to be sure they are both in the same time zone.

To know Reporting time

Similar Messages

Maybe you are looking for