To know which positions are included in a batch job

HI Experts,
We have a batch job (PFUD) which does a daily comparison for role assignment and other activities to be updated to the user's profile.
it runs daily at 10 o clock night.
consider a scenario where we have assigned a security role to a position at 9.59 pm.
We are not sure whether this position is picked up in the daily job(PFUD).
before the job completes, is there any possible way to find whether the job has picked this position for user comparison.
Can you please help me on this request?
Please let me know if you require any additional information.
Thanks in advance.
Regards
Julius.

Hi Experts,
Thanks for your suggestions,
is it possible to find whether a reconcillation has happened for user before the batch job completes its work.
(i.e) I have assigned the role to a position,I wanted to find whether this position(HR Organisational Management REconcillation) is picked in the batch job or not.
before the batch job completes the whole process.
(we can see the log only after the batch job completes... is there any way we can tell whether its picked up in the batch job or not... when the batch job is still running)
Is it possible?
Please let me know if you require any additional informatin from me to find an answer to this questions.
Thanks in advance
Regards
Julius.

Similar Messages

In I06, I have no way of knowing which songs are on my iphone 4s vs being stored in the cloud. There used to be a small cloud next to songs that were not downloaded. This was important to make sure I had the music I wanted when in an airplane.

In the new i06 that I just loaded into my 4s, I have no way of knowing which songs are on my iphone vs stored in the cloud. There used to be a small cloud next to songs that were not on the phone. This is an important piece of information if you are a frequent traveller, as most of the flights I am on don't have onboard wifi, so it becomes a crap shoot as to what I will have available to listen to.
Is there a way I can view what songs are actually stored locally?

Go to Settings > Music and set "show all music" to OFF.

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

In PI-7.0 Which Modules are included in Netweaver

give me the detail about in PI-7.0 Which Modules are Included in Netweaver(XI,EP etc)

Hi,
PI scenario is just used for XI
Regards,
michal

How to know which interfaces are going to which switch?

How to know which interfaces are going to which switch ?
I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
Regards,
Chandu

I don't want to the end devices location.
For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not help because it will hold the information of ports that are up.
Regards,
Chandu

How can I know which photos are in the library was used in each album I have created before.

How can I know which photos are in the library was used in each album I have created before?
I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
Is there any method to find this?
Thanks.

Album or Book?
If Album you can find the ones not already used:
File -> New Smart Album
Album -> is not -> Any
Regards
TD

I have synced two devices in FF. Is it possible to know which computers are synced using? I am worried about someone figuring out my email address and password.

I have synced two devices in FF. Is it possible to know which computers are synced using? I am worried about someone figuring out my email address and password.

HI nilhanw,
No currently there is not manage devices, only manage device. However changing the password will change the certificates on all the devices within less of an hour.
I hope this helps.

Can we know which DBs are having access through DBLinks to local DB?

Gurus,
Is it possible to know which DBs are linked to our local DB using DB Links?
e.g.
There are 2 DBs Database1 and Database2 having schemas Schema1 and Schema2 respectively.,
Schema1 in Database1 is having a DBLink DBLink1 which connects to Schema2 of Database2.
Hence, by logging into Schema1 a user can access the objects of Schema2 in Database2 ( assume that appropriate privilages are granted)
If "I" have access to Database2 only, then is there any way that will tell me that Database1 is having access to Database2 using the DBLink1...like wise?
Please Guide-
Thanks in advance!
-Abhijit.

Thanks Martijn,
It seems the views specified in the link you provided provide the information of DBLinks that have been defined at the local database.
But, I want to know which remote DBs are accessing my local DB using DBLinks?
Pls Guide.
Edited by: Abhijit.Oracle on May 15, 2009 10:39 AM

Which Apps are included in Creative Cloud complete plan??

I want to purchase the complete plan for individuals, but It's not clear to me which apps are included.
is there any other page with the plan details?

Desktop: Explore Adobe desktop apps | Adobe Creative Cloud
Mobile: Adobe mobile and tablet apps | Adobe Creative Cloud

How do you know which fields are mandatory while uploading PO using BAPI.

How do you know which fields are mandatory while uploading PO data using BAPI. in a structure how do you know which fields are mandatory.
and also, where how do you check that, the BAPI function module is executed.
Thanks in Advance.
Naveen.

hi
hope it will help you.
Reward if help.
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE

SQL query to know which users are working on which forms in APPS R12

Dear gurus
We need the SQL query to know which users are working on which forms in APPS R12, and how to get the user.name of those records.
thanks in advance
best regards

Hi,
Please see this thread.
USERS CONNECTED
Re: USERS CONNECTED
Regards,
Hussein

Which programs are included included in the subscription for CS customers?

which programs are included included in the subscription for CS customers?

Hi ilbra
Please check this link for the programs available as part of Creative Cloud - https://www.adobe.com/ie/creativecloud/catalog/desktop.html
Thanks
Bev

How to know which systems are listed as requiring an update

When I go into the "All Software Updates" under the Software Library Admin workspace and in my search criteria i use "Required" greater than or equal to 1, how do I know which systems are requiring the update? I cannot see the name of
the computer in the search, just a number showing how many require it. I want to know if the test systems I deployed the SCCM 2012 client to are actually showing up and I don't know if they are by just seeing a number there and not computer names.
Thanks

More specifically, you can use the report Compliance 1 - Overall compliance
for a complete overview of the compliance for a software update group and you can use
Compliance 2 - Specific software update for an overview of the compliance for a specific software update.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

It means that subscription "Illustrator, Photosho and more ..." contains. Can you send me a list of which programs are included exactly in the subscription?

Hello dear Creative Cloud Team,
I have a question for the student version for 19.34 euros per month.
It means that subscription "Illustrator, Photosho and more ..." contains.
What does 'many more'? If, for example, Adobe Indesign contain? Can you send me a list of which programs are included exactly in the subscription?
Thanks in advance
Best Regards

Explore Adobe desktop apps | Adobe Creative Cloud
Mylenium

Which user are you supposed to run jobs as in PP?

which user are you supposed to run jobs as in PP?

The traditional user for PcP version 1 xgrid jobs is pcastxgrid, an OD user.

To know which positions are included in a batch job

Similar Messages

Maybe you are looking for