To Load Master Data From Two Source System

Hi All,
I have a small question :
- Can we load master data from two different source system say from flat file and R3 or any two different or similar source system?
If answer is "Yes", then how?? If possible step by step.
Appreciate your valuable points.
Thanks,
Niraj Sharma

Hi,
Still i have problem.R3 Transformation and DTP is getting activated but when i am executing DTP for flat file,
I am getting below ERROR.
Object DTP DTP_d55.......could not found in version A.
I have checked the Master data locally for source sys in compounding Tab of the key field.
Please help..
Thanks,
Niraj

Similar Messages

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Master Data from two source systems

Hi Gurus,
I need to load master data from two different source systems. What is the best way I could do that ?
I know one approach is add system id 0logsys as prefix in compound tab and load it. But problem is master data table will have two different records and in the report it will display 2 records, can not summarized it in the report. But I need one record in the report. What is the best approach ?
Thanks
Liza

Hi,
Create two DataSources. one for each of the source system.
Create two separate flows to the master from these two DataSources.
Hope this helps!

How to load text data from multiple source systems.

Hello Gurus,
I am facing an issue of loading master data text into 0Material. I have loaded attribute data from 2 source systems. But i am not able load text data from the same 2 source systems as i am not able to see 0logsys in transfermation rules of 0MATERIAL.
Please gimme some inputs to proceed.
Thanks in advance
Peter

Hi,
I dont think that you need the source system info here, texts are mapped to attributs and attributs to source systems.
so try to load simply:
material key, text, lang (optional)
Hope it helps.

Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

Master data from 2 source systems

hi
i am loading 2 cubes from 2 different source system
1 is ECC and another is Flat file load from Old system which is no longer in use...
now cube1 has Customer records as it is manitained in ECC system
cube 2 has Customer records which exists in ECC and around 50 records are EXTRA
so how to load Customers?
should i load customers from ECC to 0customers
and load customers from legacy system to ZCustomers
how to approach this issues/ resolve it

As per my understanding those extra 50 customers came through flat file. If you want those records in cube you can have a one time upload from flat file to Customer master. If you want to neglect those records using foreign key settings you can stop the flow of those records into the cube. Essentially it depends upon your requirement.
Regards
Githen

Loading master data from two different infosource.

Hi Experts,
I would like understand the mechanism behind loading data to masterdata infoobject from two different infosource.
Ex: I have one master data infoobject called A and it has 4 attributes B C D E.
now I am loading values for A B and C from INFOSOURCE1
D and E is getting loaded from INFOSOURCE2.
could ne one please explanin how this works and how all five values get merged in single record?
Please help
Best Regards
Falgun

Dear Falgun,
Component of an InfoSource:
An InfoSource is always a quantity of InfoObjects that logically belong together and are updated in data targets.
a. <b>InfoSources with flexible update</b>
An InfoSource with flexible update can be updated in any data targets (with the exception of hierarchies). Update rules are created for this InfoSource.
InfoObjects can be used in as many InfoSources and data targets as you like.
b. <b> InfoSources with direct update</b>
Using an InfoSource with direct update, master data (characteristics with attributes or texts) for an InfoObject can be written directly (without update rules) to the master data table.
Visit the following link for more information:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope this is helpful.
Regards,
Naveen.

Transaction Data from multiple source systems

Hi BW,
I want to load transaction data from two source systems: SQ1CLNT100 QA and SQ1CLNT200 Training client. into one BW system. What is the best practice, do I need to create another data structure or can I mix the data for QA and training in one data structure and separate them with authorisation?
Please someone should help me out with the best practice on this.
Thanx.

Hi Dan,
Do you mean use 0LOGSYS as authorisation relevant InfoObject?
Dont you think that if I copy bid from one source system and use it in another, the two bids will have the same GUID? if that is possible, then I may be faced with the problem of data override. Please advice further.
Regards.

Want to transfer data from 2 source systems

hi everybody ,
i want to transfer data from 2 source systems into a info cube, how can we do that and i dont want to transfer duplicate data from two source systems. like i have 1,2,3,4 records in one source system and 1,5,6,7 records in the other system.i want to transfer 1,2,3,4,5,6,7 in to the cube. can u help me to solve this problem?

Hi
The solution given by Paolo will not work 100% correct.
Even if you create ODS and with record number as key of ODS the data in ODS will be record no 1,2,3,4,5,6,7
But data of record 1 will be overwritten (first it will hold data from 1st source system and then from 2nd source system) since record number is key. Also you can not differentiate the values of data that means which data is coming from which system.
For this you need to use compouding of infoobjects. In this expample, record number should be compounded with Source system ID infoobject-0soursystem. Then your ODS will contain source system ID along with record number as keys and record 1 will not be overwritten.
Have a look at SDN threads on compounding-
Re: Compounding
Re: Tips on Compounding with Source System ID
Hope it helps
Regards
Pradip
(don't forget points)

How to load master data from SAP R/3 system like Customer master...........

How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............

Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay.

Issue while loading master data from BI7 to BPC

Dear Experts,
I'm trying to load master data from BI7 to BPC NW using scenario 2 mentioned in the below document.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00380440-010b-2c10-70a1-e0b431255827
My requirement is need to load 0GL_ACCOUNT attribute and text data from BI7 system to BPC.
1.As mentioned in the How to...doc I had created a dimension called GL_ACCOUNT using BPC Admin client .
2.Able to see GL_ACCOUNT in RSA1, when I try to create a Transformation(step 17 , page-40) to load Attribute data I could not find source of transformation object as 0GL_ACCOUNT(which exist in BI7) . I could only able to see only dimensions available in BPC system when I click F4 in Name.
What could be the reason to not getting BI infoobject as source in BPC?
Thanks in advance...
regards,
Raju

Dear Gurus,
My issue got resolved. So far I'm trying to pull data from R/3>BW>BPC. In the existing land scape BW and BPC are 2 different boxes. That is the reason I couldn't able to see BW objects into BPC (since 2 are different boxes). To resolve the issue I have created a new infoobect (RSD1) in BPC and data loading is from R/3>BPC infoobject(which is created through RSD1)>BPC Dimension.
Thanks and regards,
Raju

Loading Master Data from SAP R/3

Hi Friends.,
           I'm going to load master data from SAP R/3 FI Modules to BW, but what do these objects mean by ?
0LOGSYS - Source System
0SOURSYSTEM - Source system ID
                 I'mn't understanding clearly, and also transfer rules aren't mapped properly.
   can anybody clarify these things ?
Regards.,
Balaji K. Reddy

Hi Balaji,
You need to use these objects when your BW is feed by different source system and you want to map differences beetween Master and Transactional Data fed by the different systems (different R/3 - Flat File - Legacy Systems - ...).
If you do not have this situation you can avoid to use these objects (probably you find these objects in Tab compound of your MD).
Ciao.
Riccardo.

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Need help with loading master data from R/3 to BI 7.0.

Hi,
First i thank everybody who took efforts to answer for my posting, i really am learning this new version with your helps. I really appreciate it.
Could any one help me with a step by step process to load master data from R/3 to BI 7.0. Please don't send help.sap.com.
will assign points .
With Thanks,
Ranjani R

Hi,
Thanks for the answers. I tried loading it yesterday, i had lot of confusions.
What should i do to load a master data from a R/3 to BI7.0.
1. Created a Info object named (EKKO_mas) with some attributes (ernam, ekorg, lifnr).
2. Go to info provider and right clicked on info area and selected insert char as data target. (Please correct if i am wrong).
3. Login to R/3, go to sbiw generic data source created one with a view/table as EKKO and map the application compound and select the needed fields by checking the checkbox. (please correct if wrong).
4. Go to source system tab and replicate data source. ( Please correct if i am wrong)
Then what should i do.
guessing steps:
4. Create a Data source, in BI 7.0 . In that as i am not using flat file, should i select "application server" instead of "local workstation" . In field tab i specified all the fields given in Info object. ( Will there be anything else i should do or change in this tab)
5. Load data in PSA. ( will the data from R/3 i selected loaded in PSA without any problem)
6. Create transformation , save and activate.
7. Create DTP save and activate , click execute.
By doing the above given step will i be able to load the master data from R/3 to BI 7.0 data target (IO) . Please help me if something is wrong with my steps.
Thanks.
RR.
*will assign points.

Loading consolodated data from two excel files / cube into one infocube

Hi Friends,
I am receiving data from two sources:
Source 1:
Customer Product Location                          Keyfig(Budget)
C1            P1          L1                                     100
C2            P1         L1                                      200
C1           P2          L1                                      300
Source 2:
Product     Location                        KeyFig (Actual)
P1               L1                                           320
P2               L1                                           350
I want to combinedata from two sources (or cubes) into one cube as follows:
Customer      PRoduct       location          Budget            Actual
C1                 P1                 L1                  100                 320
C2                 P1                L1                   200                 320
C1                P2                L1                   300                   350
I tried by creating multiple data sources / infosources / transformations / updates rules and also tried with both DSO and cube. But the records are always getting updated as follows:
Customer      PRoduct       location          Budget            Actual
C1                 P1                 L1                  100                 320
C2                 P1                L1                   200                 320
C1                P2                L1                   300                   350
                    P1               L1                                           320
                   P2               L1                                           350
Can you help me figure out if this is possible? If yes, how can I do it.
Thanks a lot in advance.

Hi,
Please use the below approach.
Load the budget data in ODS1.
Load the actual data in ODS2.
Create a ODS3 with same structure as ODS1 with additional key figure for Actuals,which will get data from ODS1. Here add a look up based product and location to populate actuals.
Start Routine
SELECT * FROM ODS2 into ITAB
FOR ALL ENTRIES in SOURCE_PACKAGE.
Transformation Routine:
Read table ITAB into WATAB
with key location = <source_fields>-Location
product = <source_fields>-Product.
If sy-subrc = 0.
RESULT = WATAB-ACTUAL.
ENDIF.
-Vikram

To Load Master Data From Two Source System

Similar Messages

Maybe you are looking for