To maintain default values in generation of operation

HI Experts
While converting planned orders co41 planned orders are not getting converted to production orders.The error is no default values maintained for generation of operation
1)There are different order types hence in OPPQ we cannot maintain single order type
2)There is routing for the material but why the error is showing "no default values maintained for operation generation"
Any suggestions to resolve the issue
Regards
venkat

Hi experts
Thanks all for ypur suggestions and prompt replies.The issue is resolved
The problem is there are 3 operations in routing and there is object dependencies for the operations and since there is error in procedure and based on that the routing is getting selected when we convert planned order to production order.Since there is error in selection condition the system could not pick up the routing and planned order is not converting to production order and hence the system is throwing message no defaut value maintained for operation generation.
venkat

Similar Messages

How to maintain default values for custom table fields -- Urgent

Hi all,
I've a requirement wherein i need to create a Z table (with maintainence view) in which i'll have date and time as two of its field which should have current date and current time as default value. Can somebody suggest as how am i to maintain the date and time fields defaulting to current date and current time.
Incase if someone is unable to intrepret what i'm trying to say, please query me, i'll elaborate it further.
Please give in your quick inputs which is highly valuable to me and also will be highly appreciated.
Thanks in advance,
Vaishnavi Varadarajan

We have a following custom table which contains the fields Date on which record was created and Name of the person who created the object. We would like to have these to be filled up with SY-DATUM and SY-UNAME respectively.
Using the events, we can achieve this.
Please refer the following link:
http://abapliveinfo.blogspot.com/2007/12/events-in-table-maintenance-in-sap.html
Also,
Write a form routine in table maintanance generator.
1. SE11 > utilities > table maintenance generator
2. environment > modification > event
define the event and form routine to make use of the tigger. in the form routine define an object for the class and call the relevant method.
Or u can do it as:
Table maintenance generator is basically used to do table operations like (insert, delete, modify...).
if you create table maintenance for your table it will build a module pool program, by using you do the above operations.
below is the procedure to create table maintenance generator.
1) Create one function group.
2) after activating your Ztable, choose 'Utilities'----> 'Table maintenance genrator'.
3) then give the authorization group and function group created abobe in the next screen.
4) Then choose the "create" button in your application tool bar, which will creates the module pool program.
5) then create one Tcode by chosing "Transaction with parameters( parameter transaction)".
6) in transaction field give "SM30", select the check box "Skip initial screen".
7) in the below of that screen you can find the "Default values" frame.
8) there under the "name of screen field" select the "View name' and 'update".
9) in value column against to "view name" give you table name, and against to "Update" put 'X' in capital letters.
save it then you can straight away use this newly created Tcode to maintain your table.
Note:- 1) make the modification while saving the data into your table using this newly generated program to carry out your validation (even though it looks like standard program; no need to enter the access key).
2) if you do any changes to your table and press the activate button automatically the table maintenace generator will be goes off, you need to create this again.
cheers,

How to maintain default values to the screen fields.

hi,
i m creating screen in se51.
when i press New button the screen is filled with default values
nrart = 'h' and proz1 = '100' .
how can i set default values.
plz give me a response

HI,
You can set default values on to screen fields using SET and GET PARAMETER command, You need to assign a PARAMETER ID for that screen field and then use SET PARAMETER before the screen is called or in the PBO of the screen, you can set default values direcly in PBO of the screen but then you have hard code those value or read the data from database.
You need to have a TABLES statement to create a strucutre that you used to create your screen fields, then when you set value to these strucutre fields these values will get tranported to the screen fields automatically.
Regards,
Sesh

How to use copy default values for material from vendor master in Account Group

Dear all:
In define AccountGroup for vendor ,there is a field named DURAS which means default values,who can tell me how to use it?
Any informations are appreciated!

Hi Katherine,
I have tried using default value as B in the customizing
If i maintain default values in the vendor master record, it will automatically adopt in the purchase info record.
Here i tried using sales person & telephone no field in vendor master record & it automatically adopts to purchase info record.
Region sales person and telephone no i have maintained in vendor master record, it automatically fetches to info record for the particular account group. I am not sure if there is any relation between vendor master and material master record.
Regards
Subbu.

ECCS- CX0AA- Default Values for Characteristics

Hello All,
I have an issue in my project concerned with ECCS.
We have maintained default values in CX0AA say we have maintained CCA (Sub Item Category) with a particular default value, now this default value has to be removed and even the Sub item Category CCA has to be removed from CX0AA. I tried it by the transaction code CX0A1, but I am unable to do it.
Can any one please let me know how to remove this default value maintainance in complete from CX0AA.
Thanks for the help in advance.
Best Regards,
Satish

or in my box: CX01->Master Data->(Characteristic) Default Values
looks like an extension to add additional fields for consolidation below the standard SAP delivered ones for master data like items and subitems. it may well be dead end for development as EC-CS is being superseded by SEM-BCS and possibly some reincarnation of Business Objects.
other config transactions in the family are:
CX0A1                Edit Characteristics
CX0A2                Edit Field Groups
CX0A3                Generate Master Data Maint. Modules
CX0A4                Reorg.View Maintenance (master data)
CX0A5                Maintain Characteristic Values
CX0A6                Display Characteristic Values
CX0A7                Maintain Characteristic Values
CX0A8                Display Characteristic Values
CX0AA                Maintain Default Values
CX0AB                Display Default Values
CX0AC                Attrib for CU: Maint. Char. Values
CX0AD                Attrib for CU: Displ. Char. Values
CX0AE                Subassign.: Maintain Char Values
CX0AF                Subassign.: Display Char Values

Default value for period indicator in MM01

Hello Gurus,
I have created a transaction for maintaining default value for period indicator in MM01 transaction. User has to maintain the period indicator for Material Type(MTART) and Plant(WERKS) before creating a material master. If it is not maintained, then error message will be generated saying that 'Maintain Period indicator for the Plant and Material Type'.
I have created an implementation for that in 'Y_BADI_MATERIAL_REF'. For Material type 'FERT' it is working fine.
But when i try to create a material of type 'RAW1' , im getting a error that 'Mandatory field Profit center is missing' which is already entered in the material master and is not in the part of forecast view i have created.
During my second testing, i got a different error MRP group 'Y0Y3' is not valid, though i entered it using F4 help.
When i commented my piece of code in the implementation, error disappeared..
Im very new to MM, please help me out gurus..
Thanks in advance.

Thanks for your reply.
I know that it can be made as optional entry in OMS9 transaction. But when i deactivated my BADI, that error disappeared.
Is there any relation between the period indicator and profit centre ?
And also while creating a material, when i select the MRP group from the dropdown list(F4), whatever the group i select, im getting an error 'MRP group does not exists'. But when i deactivated my BADI, it disappeared.
Im really confused why am I getting such errors because of this BADI.
Please help me out...

No Default Value Maintained for Operation

Hi Experts,
System is showing an error when we are trying to create the process order, hence we are unable to create the process order.
When we save the process order, system is showing below error:
" No Default Value Maintained for Op.generation for order type xxxx (mat XXXXXXXXXXXXXXXXXX)"
We have searched the existing threads, as per them we have checked all the check points like Master recipe, Production version Validity, Control keys, all are available with available validity dates.
Once Master recipe is there, still system is looking for the default value for operation, this is something which is confusing us.
Can you please guide us to resolve this issue.
Thanks in advance.

Hi Raj
For some reason your master recipe is not being selected. Generally, this is caused by status, validity, production version or customizing.
If you have created the recipe with a change number, check if a released is assigned.
Also, since you mentioned that you already checked averything, you may try to create a new master recipe.
BR
Caetano

How to get default values on selection screen(multiple ranges)?

i want to know how to maintain default ranges in selection screen...like 2000 to 3000 and 7000 to 8000 and 11000 to 15000
all the above ranges must get by default how to provide those to selection screen by default...please give me idea...with example...

Hi Suresh,
You can either use select-options or Ranges. If you want the selection screen to be displayed with allwoing user to enter values apart for the default ones use select options else use ranges. With ranges what ever values use hard code would be set and the end user will not be able to add any more values (or range of values).
Simply write the following code
tables : <name of the table from which the field belongs>
select-options <fieldname> for <tablename>-<fieldname>.
<fieldname>-sign = 'I'.
<fieldname>-option = 'BT'.
<fieldname>-low = '7000'.
<fieldname>-high = '8000'.
append <fieldname>..
similiarly add all the ranges that you need to include as default and in your select statement use the IN operator inthe where clause to include the range.
If using range replacethe select-option with the range statement.
Thanks.

Authorization default values of transaction /MRSS/PLBOMGR for object /MRSS/

Hello,
When I add the tcode "/MRSS/PLBOORGM " throuh the menu tab and when I go the authrization tab and click on either
Change Authorization Data or Expert Mode for Profile Generation the is an error message stating the following :
======================================================================================
Authorization default values of transaction /MRSS/PLBOORGM for object /MRSS/PB1 inconsistent
Message no. 5@015
Diagnosis
The authorization fields contained in the authorization defaults are incomplete or incorrect.
System Response
The process had to be terminated to avoid generating inconsistent authorization data.
Procedure
Use transaction SU24 to adjust the authorization defaults to the object definitions in transaction SU21 and then repeat the process.
============================================================================================
SU24, the custom values maintained are same as SAP Default . Any suggestion?
Thanks
Osama Khalifa

This indicates one of two things resulting from changes to the authorization object AFTER SU22 had been maintained for it:
1) One or more of the fields were converted to org. levels using the "old" technique of maintaining the table instead of running the report for this.
2) One of more of the fields were changed in SU20 or SU21 but the original data in SU22 was not corrected.
Solution in both cases is to correct the proposals in SU24 (customer data) and report it to SAP to correct in SU22 (original SAP data).
Cheers,
Julius

Utility "Maintain default events" fails

Hi,
I try to run the utility "Maintain default events for entities" and it fails with an error log whit the following error
RME-00011: Operation 'ins' on EVENT has failed
Activity aborted with API errors.
I also dicovered that the utility is not aborting on the same point each time. And so when i run the utility several times sometimes it manage to complete successfull.
null

Log Messages
Utility Maintain Default Events for Entities
Revision 6.5.1.2
Parameters Prompt Value
Entity KIS (1) FOR MANO/ EMPLOYEE, KIS (1) FOR MANO/ LOAN, KIS (1) FOR MANO/ LOCATION, KIS (1) FOR MANO/ RELATION, KIS (1) FOR MANO/ RELATION TYPE, KIS (1) FOR MANO/ SOURCE, KIS (1) FOR MANO/ SOURCE DESCRIPTION, KIS (1) FOR MANO/ SOURCE TYPE, KIS (1) FOR MANO/ SOURCE TYPE DESCRIPTION
Errors Message
RME-00011: Operation 'ins' on EVENT has failed
Activity aborted with API errors.
Information Message
Processing entity KIS (1) FOR MANO/ EMPLOYEE
RME-00011: Operation 'ins' on EVENT has failed
Activity aborted with API errors.
Debug Message
BLAPI.OPEN_ACTIVITY
create change events
Number of Entities to create events for 9
Processing entity KIS (1) FOR MANO/ EMPLOYEE
BLEVT.INS
RME-00011: Operation 'ins' on EVENT has failed
Activity aborted with API errors.
Debug Detailed Message
BLAPI.OPEN_ACTIVITY
create change events
Number of Entities to create events for 9
Processing entity KIS (1) FOR MANO/ EMPLOYEE
create evt...
ent_id 2377134742652854522970627468961044366
on_condition CREATE
att_id
att_name
relend_id
relend_name
relend_to_ent_ref
l_relend_name is :
l_evt_name is : CREATE EMPLOYEE
found event id:
l_evt_id is null
BLEVT.INS
ATTRIBUTE_REFERENCE........... =
ENTITY_REFERENCE.............. = 2377134742652854522970627468961044366
EVENT_TYPE.................... = CHANGE
NAME.......................... = CREATE EMPLOYEE
ON_CONDITION.................. = CREATE
RME-00011: Operation 'ins' on EVENT has failed
Activity aborted with API errors.
Statistics
Description Headstart Utilities - Run Utility
Username KFM1
Summary Level Number of Messages
Errors 2
Warnings none
Information 1
Debug 4
Debug Detailed 17
Date Time Initialized 18-07-2001 08:58:27
Date Time Closed 18-07-2001 08:58:29
Elapsed Time 2 seconds
null

Assigning a default value to a field

Hello Everyone,
       Could you please tell me how to assign a default value to a field in a transparent table, so that while creating an entry even if we don't enter the value, a default value will be assigned.
Thanks,
Anbu.

Like this
DATA: BEGIN OF itab OCCURS 0,
        field1 TYPE c VALUE 'X'
        field2 TYPE c,
      END OF itab.
append itab.
append itab.
You will have by default X set in both rows for field1.
Regards
Marcin
PS: Ooops I just noticed you meant transparent table but I wrote about internal one. As long as you maintain that table using maintenance view you can use event 05 - When Creating a New Entry and set fixed value for a field there. So whenever you create new entry it will receive that value.
Edited by: Marcin Pciak on Jun 23, 2010 8:57 AM

How to set default value for a drop down in Mobile Application Studio

Hi,
We have a requirement in which for a drop down - Transaction type (Activities), the value should be defaulted to 'Visit' and the Activity Category should be 'Sales Visit'. I tried debugging the code and got the piece of code where this value is referred, but i'm unable to find out the location where this value is picked from. Also while opening up the properties corresponding to this, there is a default value tab in the properties pane. I tried by giving this default value, but didn't work. When I'm trying to revert the changes i've made in the property, it is showing up an error.
Any pointers on this would be of great help.
Thanks in advance,
Rasmi.

Hi Rasmi,
You can default the process type field of BOACTIVITY by different ways-
1.In BOL, business object BOACTIVITY loaded event, check the parameter bIsNew and then default the value of process type if you want it only for new activities.
Other attributes currently get defaulted in the attributechanged event of BOACTIVITY where field is processtype.So if processtype is defaulted it will try to default other attributes based on that.It will pick values from the customizing maintained in SPRO->CRM->Transactions->Basic Settings->Define Transaction Type->Customizing Header.
2.You can also do defaulting in the UI.If you want to default one field based on a value selected for drop down, then write the code in the onselected2 event of the drop down.
In your specific case, best way is to use option 1.
Regards
Vivek

How to change default value in "Project file" dialog

I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file. If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:" The default value points to a different place than where the file installed and the VI won't run untiI I change the path. If I save and open the file, it doesn't remember the change. When the vi is running I can right click the text and there is an option to reinitialize to default. I've rooted around all over the place and can't find where this can be set or changed. How do I change this?

On the front panel, change the control to the desired value.
Now, right click on the control, select Data Operations and Make Current Value Default.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

Opening Build Specification - Error 7 occurred at Get LV Class Default Value.vi

I recently ported my project to a new PC. Everything seems to run fine uncompiled, and I am able to build an executable without issue. However, my build specification shows up in the project explorer with question mark next to it. When I try to build again or edit the properties I get a popup with the information below:
Error 7 occurred at Get LV Class Default Value.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
AB_UI_Initialize_Framework.vi
AB_UI_FRAMEWORK.vi
AB_Item_OnDoProperties.vi
AB_Item_OnDoProperties.vi.ProxyCaller
LabVIEW attempted to load the class at this path:
<Empty Path>
I've seen messages from people getting the same error when trying to run a compiled executable, but mine actually runs fine. I am just unable to open the build specification to rebuild or edit its properties.

This application is for a Windows machine, and I am not using the Report Generation Toolkit. However, I shut down my computer last night and when I booted it up this morning my Build Specification now opens fine and I am able to edit it. My only thought as to why it occured in the first place is that I had added several files to user.lib and instr.lib and restarted LabVIEW, but it appears that it required my computer to be restarted as well.

Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
     Get LV Class Default Value.vi
     NI_report.lvclass:New Report.vi
     print report.vi
     EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett Herning

Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File

To maintain default values in generation of operation

Similar Messages

Maybe you are looking for