To maintain 'Functional Location Description' field as mandatory field

Hi All,
I am unable to maintain the "Functional Location Description" field as mandatory field (Screen Filed: IFLO-PLTXT).
In IMG settings, I am unable to find this field to change it to "required" field. Could you pls. tell me the way to make this field as mandatory.
Thanks in advance.
JK

hi try t.code oiaj there is a filed of description

Similar Messages

  • Functional location description as mandatory

    Hi Experts,
    I have a requiremenet to set functional location description (IFLO-PLTXT) as mandatory. in customizing (OIAF) i could not find this setting.
    How to make this field as mandatory/required? pls help.
    Thanks
    Rgds,

    Hi,
    If you could not find it thru configuration then try using SHD0 Tcode  transcation variant to make that field mandatory ...for IL01 and IL02 tcodes . The topic has been discussed many times please use the search option of the forum for steps.
    You can save the transaction variant in separate package create via SE80 and transport the changes.In shd0 tcode you can activate the transaction variant under standard variants tab.
    regrds
    pushpa

  • Functional Location Required field- Notification processing

    Hello All,
    I would like to maintain Functional Location as a Required field for certain Notification Types. In IMG:
    Plant Maintenance and Customer Service>Maintenance and Service Notifications>Notification Creation>Notification Types>Set Field Selection for Notifications
    Field Selection for Maintenance Notifications
    Field Selection Reference Objects PM Notification
    When I Select Field Selection for Maintenance Notifications>Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field the Notification Type does not have Functional Locatiion as a Required Field.
    When I select Field Selection Reference Objects PM Notification:ISelect Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* the Notification Type does not have Functional Locatiion as a Required Field.
    But When I select Field Selection Reference Objects PM Notification:Make Functional Location as a Required field and then Select Influencing: Notification Types and Selected the desired Notification Type and set Functional Location as a Required field* all the Notification Type does have Functional Locatiion as a Required Field.
    How do i make the Functional Location as a Required field for a particular Notification type.
    Thanks
    Krish

    1) Field Selection Reference Objects PM Notification
    2) Click 'Influencing' button
    3) Double-click 'Notification type'
    4) Input your notification type on 'Contents' field, then enter
    5) Select 'Required' for functional location
    Save
    Regards
    Luke

  • Maintain Storage Location Description in Multiple Languages

    Dear Experts,
    I need to maintain Storage Location Description in both EN and DE (Denmark) Languages.
    Kindly suggest me whether this is possible?
    If yes, please let me know how can we do this.
    I have tried doing this but I could maintain in only one language (either EN of DE)
    Regards
    Shashidhar

    Hi Jurgen,
    That was really helpful.
    My issue is, when I login with DE Language, I want to see the German Description for both Storage Location and Plants
    When I login with EN, need the descriptions to be in English.
    Is this possible?
    Regards
    Shashidhar

  • ILOM0001 - functional location description  (pltxt)

    Hi,
    problem:
    the (same) description (PLTXT) of functional location has to be saved in TWO different languages every time any change is done on a functional location AND  save is (pressed) processed.
    User exit ILOM0001 is already implemented and can be used for further enhancements.
    Open for any suggestions.
    Thanks a lot for any response.

    Thanks so far.
    @Dwaraka
    I already thought about a direct update of the IFLOTX table.  But I also learned (: NOT to access standard SAP DB-Tables directly!
    The user exit ILOM0001 is used only be the one project. So no issues on that end.
    @Pete
    It's not causing a problem -> I have to realise the proper saving/update of the same description in two different languages every time the 'SAVE' is processed.
    Users can logon in (2) different languages (international company). But in EDIT mode for the technical object (func. location) the description value has to be the same!
    Did I answer all your questions?
    Thank's for further replies.
    Eduard
    At last the problem was solved. (not that nice - but anyway)
    - The functional location is created (and saved) using SAP standard BAPI's.
      in the User Exit i put coding which INSERTs the same PLTXT (with respectively other language code) using SAP update function module for IFLOTX. this part runs only if transaction (sy-tcode) IL01 or a specific condition are set.
    - During the process the user (always!) needs to modify some Data of the functional location. [1. SET PARAMETER ID ifl FIELD f; 2. call transaction IL02 and skip first screen]
    in the User Exit there is bapi call - something like IFLOTX_UPDATE or  - the existend PLTXT is copied into the Importing structure of the function module and the language is switched . The text is then modified  after COMMIT WORK
    It's probably not the best way - but it worked.
    Edited by: Eduard Reidel on Sep 15, 2009 6:34 PM

  • LSMW for functional location address fields

    HI Folks,
    I'm loading functional location thru LSMW Direct input method. I coudn't able to see any structure relation for address fileds on functional location. I have mapped the IBIPFLOC for functional location but it doesn't have any address fields. So how to load the address fields of functional location thru LSMW direct input method. Thanks in advance.

    Hi Praveen,
    You can create a separate LSMW for this or you create a LSMW for FLoc upload along with the address details. I don't think this is possible with the standard program you have chosen.
    Regards,
    Bala

  • Getting Functional Location Description

    I can find the code for the functional location in itob-tplnr or in mcipmis-tplnr but it returns a code and not the description.  Is there a function I can use?

    Hi again. Please try this example program.  This is working quite well in my system.
    report zrich_0001.
    data: pltxt type iflotx-pltxt.
    data: xequi type equi.
    data: xiloa type iloa.
    data: xEQUZ type EQUZ.
    parameters: p_equnr type equi-equnr.
    start-of-selection.
      clear xequi.
      select single * into xequi from equi
               where equnr = p_equnr.
      select single * into xEQUZ from EQUZ
               where equnr = p_equnr.
      select single * into xiloa from iloa
               where iloan = xEQUZ-iloan.
      call function 'IREP1_LOCATION_TEXT_READ'
           exporting
                i_tplnr = xiloa-tplnr
           importing
                e_pltxt = pltxt.
      write:/ xequi-equnr, xiloa-tplnr, pltxt.
    Regards,
    Rich Heilman

  • Reference object structure list iam getting only functional location no

    Dears
    There is one query from our client that in reference object structure list he is getting only functional location no and not functional location description.i asked him to go to menu settings field selection -functional location and from the choose list  ask him to select functional location description .But still he couldn't get the required one. Can any body tell me the reason.

    Hi,
    You can achieve it from OIAJ tcode and set the required setting for your field IFLO-PLTXT.
    Regards,
    Keerthi

  • Equipment Not Allowed at Functional Location ( Inst. at FunLoc is selected)

    Hi All,
    I have configure Structure Indicator like XXXX-XXXXXXXXXXXXXX. Now I have maintain functional location label like
    e.g ABCD-EFG XYZ  ( there is a space between G and X) .
    I have already allowed installation of all equipment category to functional locations at configuration. But still system gives me an error like Installing equipment is not allowed at functional location ABCD-EFG XYZ (MSG NO IA0002).
    Now if I select ABCD system is allowing to install equipment at ABCD.
    If space is a special character and i have not maintained S , then why system has created that label, it must throw an error while creating that label.
    Please suggest.
    Regards,
    Anish Ahya

    Equipments can be installed at functional location if the following changes have been made
    1. Configuration for equipment category installation (Already done in your case)
    2.  In the functional location master data in structure tab "equipment installation allowed" should be activated.
    Please allow the equipment installation from functional location master data .
    Regards,
    Tehisn

  • Partner data from Functional Location to Equipment

    Dear Expert,
    How can I transfer partner data (Bill to party, Ship to party) from Functional Location to Equipment. I have tried with 'Install with data transfer' but there is no option available for partner.
    Is there is any other way to transfer partner data while assigning Equipment to Functional Location.

    Hi,
    Functional Location:
    Define field selection for partner data fields   :   Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations --Field Selection for Multi-Level List Displays of Functional Location.
    The Partner tab should be visible in the functional location: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service-- Technical Objects-- General Data -- Set View Profiles for Technical Objects.
    Assign functional location category to partner determination procedure: Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects -- Functional Locations -- Define Category of Functional Location.
    Define field selection for partner data fields
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --Equipment -- Define Field Selection for Multi-Level List Displays of Equipment.
    The Partner tab should be visible in the equipment
    Plant Maintenance and Customer Service -- Master Data in Plant Maintenance and Customer Service -- Technical Objects --General Data -- Set View Profiles for Technical Objects
    Assign equipment category to partner determination procedure
    Plant Maintenance and Customer Service --Master Data in Plant Maintenance and Customer Service --Technical Objects --Equipment -- Assign Partner Determination Procedure to Equipment Category.
    Regrads
    bharat

  • Euipment or Function location field Mandatory in Work Order

    Hi
    How to make either Equipment or Function location ( either of the one) mandatory in Work Order.
    Thanks ini advance
    Thiyagarajan

    Hi ,
    The field equipment or f.loc can be made mandatory using transaction variants  -- but it would be applicable for all order types .....
    1.use tcode SHD0 , give IW31 in Transaction code and ZIW31 in transaction variants and press create ..
    2.this would take you to IW31 initial screen and enter planning plant and order types and press enter this would give the dialog box of screen variant .Here press continue and this would take you to inside screen .
    3.Here you again press enter and by entering some required data you can finally reach to screen variant of reference object
    and can mark the equipment or f.loc field mandatory as required .
    4.Once this is finished you can you can select local object and save ... and come back and test the same ... now this trans varint ZIW31 can be assigned to user group ...
    go thru the documentation of SHD0 for bette information
    regards
    pushpa

  • How to make the description field as mandatory in IW31 T.code

    Hi All,
    My requirement is make the Description field as mandatory in T.code: IW31
    That field is CAUFVD-KTEXT.
    How to make this field as mandatory,
    I tried with BADI: IWO1_SCREEN_MODIFY
    And some customer exists also (ZXWOCU04, ZXWOCU09) but unfortunately I couldnu2019t reach my functionality
    Can any please help me to reach out my functionality?
    Thanks and Regards,
    Rambabu.

    Dear Friend,
    go to spro - plant maintenance and customer service - maintenance and service processing - maintenance and service orders - define field selection for order header data(pm) -Field Selection for Order Header Data and Reference Object
    here keep CAUFVD-KTEXT is mandatory for your order types.
    Regards,
    pardhu

  • Functional Location Field In AS02 (Time dependent)

    Hi All,
    I need to know if it is possible to add or show functional location in time-dependent tab(tcode AS02), because i found TPLNR(functional location) in table ANLZ. Fyi, ANLZ is the source table of time-dependent tab in tcode AS02.
    Really appreciate your help
    Thanks

    Dear:
              First see  layout assigned to your class through OAOA and then go to the path SPRO....Financial Accounting...Asset Accounting...Master Data....Screen Layouts...Define screen layout for master data...select layout...logical field group...select time dependent data...field group rules.. There you will find 89 (functional area)... Make its status optional or mandatory whatever you require.
    This will show the field in AS01 for data input.
    Regards

  • Help - Class name and descriptions for a function location.

    Hi Guys
    i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and  the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
    please help.
    many thanks.
    seelan.

    sadiepu1 wrote:
    When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
    Did you use facebook to log in? 
    Verizon will not be able to help you retrieve any of the information you need.  You will have to contact Zynga.

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

Maybe you are looking for