To make a field hide and show based on a condition.........

hi all.
i have a requirement where i need to make a set of regions alter based on which field we select....
i have a LOV input and based on that the input the respective region has to be displayed..
suppose i have 5 regions.....
if i give 1 then the 1st region has to displyed.....similarly 2nd and 3rd......
any help..........????????
DEV

Hi,
Check the code snippet from Dev Guide:
if (pageContext.isLovEvent())
// Form was submitted because the user selected
// a value from the LOV modal window,
// or because the user tabbed out of the LOV input.
// Find out which LOV input triggered the event.
String lovInputSourceId = pageContext.getParameter(SOURCE_PARAM);
// Find out the result values of the LOV.
Hashtable lovResults =
pageContext.getLovResultsFromSession(lovInputSourceId);
if (lovResults != null)
// Update the page depending on the value chosen by the user.
It explains what you need.
niranj

Similar Messages

  • How to make a checkbox hide and show div between two different pages

    Hi
    I am developing a mobile site application.
    Currently I need to make a checkbox effect.
    Here is how I want the checkbox to work for me..
    I want users to click on the checkbox, for an option on the editor as well as its content on the live mobile to hide.
    These are two different files which contains the user interface.(the live mobile file and the editor file)
    Now how can I make it possible to make both options hide or show at the same time after a user clicks on the
    checkbox to show or hide.
    Is it possible for a checkbox created on a different file affects an external file to hide a div within that file?
    If so kindly advice me on this.
    Thanks in advance

    There are several tutorials out there for dissolving a layer, turning text to sand, and similar things. Use any/all of those and then time remap that composition to make the particles form into your word.

  • Make a button hide and show an image

    I want a button to hide and then show an image, basically an on/off switch.  I tried accomplishing this using multipl slides that jump around but even after removing all transitions, you can still tell that the slides are changing instead of just the image appearing and disappearing.  I have seen some posts about advanced actions but it's reading clear as mud.

    Christina,
    If you want a toggle button, that can be done with advanced actions. What did you read already? And which version of Captivate are you using?
    The idea is that:
    You create the image, but set its visibility unchecked in the Properties panel
    You create a user variable, will label it v_visib that has a start value of 0, will be set to 1 when the image is visible
    You create a conditional advanced action, that will check the value of v_visib:
    IF v_visib is equal to 0
        Show Image
         Assign v_visib with 1
    ELSE
        Hide Image
        Assign v_visib with 0
    I blogged several times about toggle buttons:
    http://lilybiri.posterous.com/toggle-shape-buttons      for Captivate 6 only
    http://lilybiri.posterous.com/toggle-button
    Lilybiri

  • How to hide and show Omniportlet based on user privileges

    hi all
    I am trying to hide or show an Omniportlet based on user privileges, which means accessc control on portlet-level for Omniportlet. But I couldnt find out how to do it.
    According to Portal Developer's Guide:
    You can hide and show portlets built with Web Clipping and OmniPortlet on portal pages dynamically by using security managers. Although Web Clipping and OmniPortlet do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.
    Question is: where can I find that XML file? Is this file accessible and configurable somewhere through Portal Enterprise Mgr?

    Hi,
    I don't think you can edit this file through Enterprise Manager. Atleast as far as I know. But its available on the server. I have a NT installation and I found it under:
    D:\oracle\Mid_tier\j2ee\OC4J_Portal\applications\portalTools\omniPortlet\WEB-INF\providers\omniPortlet
    You might want to restart the Portal application through OEM after you change this file.
    Hope this helps,

  • Next Button in a Hide and Show Region is not displayed correctly

    I created a new button at the bottom of the region in a Hide and Show Region called [Next >]. The button is displayed to the right of the region. I want it displayed at the right end of the bottom of the region. The following is the button properties
    Name
    Button Name : NEXT_SIGNS
    Text Label/Alt: Next >
    Displayed
    Sequence            130
    Display in Region: Signs and Nameplates (1) 100
    Button Position:    Bottom of Region
    Button Alignment: Right
    Attributes
    Static ID:          
    Button Style:      Template Based Button
    Button Template: PA Button
    Button Type:       Hot
    Button Attributes:
    Action When Button Clicked
    Action:                 Submit Page
    Execute Validation: Yes
    Database Action:    No Database Action
    Conditions
    None
    Security
    None
    Configuration
    NoneWhy is this occurring and how can I resolve the issue?
    The following is the template of the hide and show region:
    <div class="hide-show-region" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
      <div class="hide-show-top">
        <div class="hide-show-title">
    <div class="rounded-corner-region">
    <div class="rc-blue-top">      
    <div class="rc-blue-top-r">
              #TITLE#</div>
    </div>
    </div>
           <a style="margin-left:5px;" href="javascript:hideShow('region#REGION_SEQUENCE_ID#','shIMG#REGION_SEQUENCE_ID#','#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif','#IMAGE_PREFIX#themes/theme_2/rollup_minus_dgray.gif');" class="t1HideandShowRegionLink"><img src="#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif"
      id="shIMG#REGION_SEQUENCE_ID#" alt="" />Click on arrow to enter/hide  information for signs and/or nameplates</a></div>
        <div class="hide-show-buttons">#CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</div>
      </div>
      <div class="hide" id="region#REGION_SEQUENCE_ID#">#BODY#</div>
    </div>APEX version 4.1
    DB version 10g Rel 2
    PLEASE HELP!!
    Robert
    http://apexjscss.blogspot.com

    I created a new button at the bottom of the region in a Hide and Show Region called [Next >]. The button is displayed to the right of the region.I only see it displayed to the right of the region in Firefox (Safari and IE8 showed it above the sub-regions). Not obvious to me why this is the case (it's usually IE that does it's own thing).
    I want it displayed at the right end of the bottom of the region.Button position Bottom of Region causes an anonymous HTML table containing the button(s) to be generated after the <tt>#BODY#</tt> placeholder in the region template. Your Hide/Show region template didn't have a <tt>#SUB_REGIONS#</tt> placeholder so by default the sub-regions were rendered after the <tt>#BODY#</tt> and the "Bottom of Region" button container (don't know if this is the intended behaviour or a bug). Adding <tt>#SUB_REGIONS#</tt> before <tt>#BODY#</tt> in the template gets things in the right order (button after sub-regions):
    <div class="hide-show-region" id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
      <div class="hide-show-top">
        <div class="hide-show-title">
    <div class="rounded-corner-region">
    <div class="rc-blue-top">      
    <div class="rc-blue-top-r">
              #TITLE#</div>
    </div>
    </div>
           <a style="margin-left:5px;" href="javascript:hideShow('region#REGION_SEQUENCE_ID#','shIMG#REGION_SEQUENCE_ID#','#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif','#IMAGE_PREFIX#themes/theme_2/rollup_minus_dgray.gif');" class="t1HideandShowRegionLink"><img src="#IMAGE_PREFIX#themes/theme_2/rollup_plus_dgray.gif"
      id="shIMG#REGION_SEQUENCE_ID#" alt="" />Click on arrow to enter/hide  information for signs and/or nameplates</a></div>
        <div class="hide-show-buttons">#CLOSE##PREVIOUS##NEXT##DELETE##EDIT##CHANGE##CREATE##CREATE2##EXPAND##COPY##HELP#</div>
      </div>
      <div class="hide" id="region#REGION_SEQUENCE_ID#">
        #SUB_REGIONS#
        #BODY#
      </div>
    </div>Firefox is still showing the button to the right of the sub-regions. I'm assuming that this has something to do with everything in this theme being floated left (for reasons that escape me), so we'll try to clear the button container using CSS. The table doesn't have an ID or class so try an adjacent sibling selector using the ID of the preceding sub-region:
    #nameplates-name+table {
      clear: both;
    }Finally, the button alignment was set to "Left", so I changed it to "Right".
    Seems to be working in IE8 (all I have access to at present).
    Edited by: fac586 on 30-Nov-2012 20:10
    Fixed CSS selector syntax.

  • Classic Report with Hide and Show Region Template does not show report

    Hello,
    I created a "No Template" region on a page with a Classic Report. When I change it to a "Hide and Show" region template, the report does not show up when I click to Show the region...is there an additional step i'm missing to make the report show up. Its a very simple query.
    Thanks in advance,
    John

    How about posting some relevant information like Apex version, RDBMS version, Theme you are using, etc.?
    Regards,

  • Javascript and hide and show.

    Is there any way to hide single item on the form (not region)?
    I have tried to hide an item based on the condition.
    I have radiobutton with value 1 and 0 so I have created on click event that check its value and hides item but:
    the item that I want to hide is a date item with the datepicker option. What happens that item is hidden but label and datepicker icon stays.
    here is the code
    function HideAndShowElement(fieldName,elementNameToHide)
    if(html_RadioValue(fieldName) == 0)
    $x_Hide(elementNameToHide);
    else
    $x_Show(elementNameToHide);
    Any suggestions?
    Robert

    Hello,
    $x_Hide(elementNameToHide); will only hide the element.
    To hide label .. edit the label of the itme.eg. suppose lable is MY_LABEL make it
    [span id="my_lable_id"]MY_LABEL[span] ( replce [ and ] with < and > )
    and make ur javascript code to
    $x_Hide(elementNameToHide);
    $x_Hide('my_label_id');
    Regards,
    Shijesh

  • Hide and Show question.

    I have application with button which I would like to show only when status is "Draft".
    I have created created condition for the button where Value Exoression 1 = Expression 2
    Where expression 1 is P9_X_STATUS
    and expression 2 is Draft.
    Button is still hidden.
    Just to let you know that if I place button below status field, my hide and show condition works.
    Any idea?
    Robert

    I have set the default value to "Draft" when page is first opened.
    and I have Condition set for it : Exists (SQL query returns at least one row)
    SELECT 1
    FROM DUAL
    WHERE :P9_X_STATUS = 'Draft' or :P9_X_STATUS = '' or :P9_X_STATUS = null
    I don't understand why this button is shown when I move field below it (button).
    What is the rule for showing and hiding elements on the form?
    Regards
    Robert

  • Hide and show regions

    Hello,
    I am using Hide and show regions on my page. But now I'm encountering a problem. Every time the page reloads, all regions are collapsed. Is there some way to make sure the regions that were open, are open again when the page reloads.
    Thanks in advance,
    Bram.

    Hello Bram,
    Ben's right :) I forgot it was allready made in the past... check out the howto: http://apex.oracle.com/pls/otn/f?p=35250:6:1357026562718730::NO
    So, I just wasted some time creating my own example, without the collections used in the packaged app Ben referred to. But here it is, nonetheless: http://apex.oracle.com/pls/otn/f?p=39118:10
    Greetings,
    Rutger
    http://rutgerderuiter.blogspot.com/
    ===============================================================================
    You can reward this reply by marking it as either Helpful or Correct ;-)

  • Hide and show portlets

    Hello all,
    I have created two forms and two reports and added them in a page as 4 portlets like this...
    FORM1                    REPORT1             
    FORM2(Hidden)        REPORT2(Hidden) 
    ---------------------------------------------------------By default Form2 and Report2 are hidden..
    If I click the link on Report1...
    Form2 and Report2 should be visible....
    How can i acheive this..
    I hope someone suggest me a good solution..
    Thanks a lot in advance..
    Regards,
    Paappu.

    I do not think it is advisable to use page properties to hide and show portlets on them on user interaction. This assumes that we can do it by changing the display properties of those portlets on Page.
    The reason is this: If I am a user of your portal and visited one such page, I would see Form1 and Report1 on the page.
    Let us say, I clicked on some link you are planning, and then I started seeing Form2 and Report2 on that same page.
    However at the same time, you also visited on the same page right after I had clicked on that link. Then you will also see Form2 and Report2. And so the state of the page will be changed for all users after the first user's action.
    Is it actually what you would intend to do? that different users will see different pages based on who has visited the page before them?
    that is why I would not recommend it. Hope that helps.
    AMN

  • Hide and show button

    hi , i want when i click on show button then the show button hide and the hide button show , and vice versa , how i will do that through java script or any method plz help

    Hi little foot ,
    I am using apex 4.0
    can you tell me how to make the hide and show region to open it on sidewise now its opeing in downwards direction can you tell me .
    Thanks & Regards.
    Shadab

  • Need Help with Sticky Hide and Show 0.9

    I am trying to implement Sticky Hide and Show v0.9 into my applications. I have created a custom region named "Hide and Show Sticky" for Theme 8 as shown in the example application. However when I use the templet my region does not have a hid/show button. I have very little experience with Templates so any help would be great!

    Sorry for the bump. I am REALLY stuck! I viewed the source with the region using the Seeded (Non-Sticky) template and using the new Sticky template. I see some dramatic differences but nob that make sense to me. I tried to past the lines in the forum but they are blocked.
    Any help would be great!

  • Hide and Show Region Problem

    Hi,
    I have created a report with the following attributes:
    Region Definition User Interface - Hide and Show Region;
    Report template -Standard;
    Sort Columns - all checked.
    Report source - SQL Query (PL/SQL Function Body returning SQL query).
    I open a page with this report, click on (+) and show region but when I try to sort records in the column region hides. The same problem I have with some others report templates.
    Report templates Borderless and Horizontal Border do not have this problem.
    I am using Application Express 2.2.1.00.04.
    Could someone explain what it is?
    Thank you in advance.
    Val

    Report template -Standard
    Use a "Standard - PPR" template instead, that works better with a Show/Hide region template because the entire page is not re-rendered when you click on a column header to sort. Only the report region content is refreshed.

  • Hide and Show

    Hi all,
    In my application i want to hide and show a report. For this i created two buttons in a new region and setting a hidden item value depends on Hide or Show button.But i want to hide the report only not the title so that i can able to place the Hide and Show buttons in the same region.

    Hi,
    There is a "Hide and Show Region" region template that you can use that does this for you.
    However, if you wish to stay with what you have, you could enter the report title into the region that contains the buttons (assuming that this is above your report?) and use the "Region without Title" for the report region itself.
    Andy

  • Hide and show region and an interactive report showing side by side

    Hi,
    I have a report and some filters (drop down list) on a page... I've put my filters in a Hide and show region...
    Here is how it's been set up...
    Display Point: Page Template Body (1)
    20           Filters     HTML     
    Display Point: Page Template Body (2)
    10           Report Saved Report     
    my issue is that the filters and report search region shows side by side in a same row... tried changing the regions but still getting the same response... Please advice

    Hi,
    Place both regions to Display Point: Page Template Body (3).
    Then set filters region sequence to 10 and report 20
    If that is not what you need, please specify more how you like layout look like
    Regards,
    Jari

Maybe you are looking for

  • How to find out the user from the Jobs queue in Report server

    Hello All! I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has

  • Add Apex Region Button to a JQuery Dialog Box....

    Hello Everyone, I have created a JQuery dialog box modeled as in http://shijesh.wordpress.com/2010/04/10/jquery-modal-form-in-apex-4/. Now my only question is how do i add a region button inside the JQuery dialog box. Please i need this answer desper

  • I need to update my old iPod touch. How can i do that?

    my ipod haven't been updated for a long time around 8 month and now i can't download anuthing from the store because it does not have the latest version ios 3 something. can somedoby help me??? please!!! i need to knoe tho steps to fallow to update i

  • Content Integration Q.

    I am developing a site on Webcenter 11g using JDeveloper 11.1.1.3. This question related to content integration. My initial public facing site will have a single template that encompasses about 4-5 pages. An "about us", "careers", "contact us". I wis

  • Apple TV2 throwing "An error occurred while loading this content"

    Hi I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies fro