To make a set of records in 1 table to affect another table(dashboards)

Dear All,
I am using Web Application Designer and making a Dashboard.The situation is the following:
I am using 2 tables(table A and table B) and One(1) navigation filter(characteristic for filter : customer).The tables display 2 different queries when reporting i.e.Each table uses a different query.
What I require :
When I drilldown on customer using the navigation filter I should get customerwise report in both the tables A and B.But I strictly require table B to display only those customers that table A displays i.e. table B is dependent on table A.
The Problem:
Presently I am getting the navigation filter to drilldown customers in both these tables but table B does NOT display the exact same customers as table A.
Do I use a different query in the navigation filter than both the queries used in the tables ?
Please try solving the above problem.
Thanks everyone.
Yours truly,
Ratish

Sir,
Yes, but table B does Not show the exact same customers as in table A even after making table B as an affected provider of table A.
Yours truly,
Ratish

Similar Messages

How to retain current set of records in advanced table in OAF

I have an advanced table in a OAF page. Number of records displayed is set to 5. Now, when I have more than 5 records, we can view the next set of records using navigation buttons of the advanced table. One of its column is an image which has "Action Type" as "fireAction" and "Submit" set to "True", which when clicked displays further details about the selected record in a separate region. However, in this process the page is getting refreshed and the table is again displaying the first set of 5 records even if i chose to display details about record in the next set of 5 (i.e after navigating using "Next 5" button of the table).
Is there any way to retain the current set of records displayed in the advanced table across the page refresh.?
Thanks
Nagamanoj

Solved.
Somewhere in our code, while populating one of the columns of the table, we were resetting the VO which was causing the issue. Modified that method call to add a parameter to mention from which row should the table be populated.
Thanks
Nagamanoj

How does jdbc fetch a set of records in oracle

Hi,
Oracle does not support server side cursors,if so how does jdbc fetch a set of records(set by setFetchSize(), which is 10 by default) each time I say rs.next().Does this mean Query is re-executed to fetch the next set of records? Can some body throw some light on this?
thanx in advance
Gnayan

You are asking about implementation details of some JDBC driver, but you don't say which one. This makes it very difficult to answer your question. You might want to try asking the question of the people who wrote the driver.

Script for generate randomize administrator password which make log file to recorded new administrator password with associated computer name on it

Hi
I Need VDS script in order to change domain client local administrator password in my domain ,and put this script in startup script via group policy, but for security purpose I want to randomize local administrator password and log new password
set for each computer on a text file, I want to over write the old password of eachcomputer in log file with new one in order to have the update log file ,my support team some times need administrator password for troubleshooting.
I need a script for generate randomize administrator password which make log file to recorded new administrator password with associated computer name on it and each time new administrator password set it over write the old record on
the log file and update the content of log file automatically.
Regards

Hi
I need a script for generate randomize administrator password which record new password on a log file with associated computer name and each time new administrator password set for a computer it over write the old record
on the log file and update the content of log file automatically.
Regards

Retreiving a set of records

Hello
I'm a newbie and i have to make a procedure that can return a set of records , in Transact SQL I make using temporal tables , is possible to do the same in Oracle ? Thanks

The procedure would look something like below. The other statements in the code are just to help test the actual procedure.
Please post more details so we could suggest solution for your exact needs.
SQL> variable rc refcursor
SQL>
SQL> create or replace procedure get_rows (rc OUT sys_refcursor) is
2 begin
3    open rc for
4    select * from scott.emp ;
5 end ;
6 /
Procedure created.
SQL> exec get_rows(:rc) ;
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE           SAL       COMM     DEPTNO
      7369            CLERK           7902 17-DEC-1980       1200                    20
      7499            SALESMAN        7698 20-FEB-1981       1600        304         30
      7521            SALESMAN        7698 22-FEB-1981       1250        504         30
      7566            MANAGER         7839 02-APR-1981       2975                    20
      7654            SALESMAN        7698 28-SEP-1981       1250       1404         30
      7698            MANAGER         7839 01-MAY-1981       2850                    30
      7782            MANAGER         7839 09-JUN-1981       2450                    10
      7788            ANALYST         7566 19-APR-0087       3000                    20
      7839            PRESIDENT            17-NOV-1981       5000                    10
      7844            SALESMAN        7698 08-SEP-1981       1500          4         30
      7876            CLERK           7788 23-MAY-0087       1100                    20
      7900            CLERK           7698 03-DEC-1981        950                    30
      7902            ANALYST         7566 03-DEC-1981       3000                    20
      7934            CLERK           7782 23-JAN-1982       1300                    10
14 rows selected.
SQL>

Pls help - Thunderbird still can't recognise my new email - have followed online guides + set MX records but still can't get TB to recognise - spent over a day

Hi,
I am trying to set up my new business email account (3rd party - netregistry from Australia) [email protected] onto my Thunderbird account.
I have new domain with wordpress exploreyogatravel.com
Trying to get new email onto Thunderbird - have set MX record for netregistry on wordpress. Have manually configured mail account on TB (pop/port/ etc) per netregistry instructions). Have spoken to netregistry on a number of occasions - they now feel it is at the TB or WP end.
TB still can't locate settings for my email account when I manually set up as following and I have wasted so much time on this.
(incoming - pop3 - pop.exploreyogatravel.com - 995 - SSL/TLS - normal password
outgoing - SMTP - smtp.exploreyogatravel.com - 465 - ssl/tls - normal password
username incoming - [email protected] outgoing - same)
Please help what I need to do to get this sorted.
Regards
Mariska

I think your latest issue will reside in your anti virus package.
Disable email scanning. The setup routine tries to connect to the server 8 ways to Sunday to establish the correct settings. The Anti virus program thinks there is mail coming, steps up to the plate and makes a total disaster out of something that was often not all the pretty anyway. To make matters worse, because of the quick fire scanning some then just decide it is malware trying to spam people and blocks it in the firewall.
Next check the firewall (particularly the pesky Norton one if installed) and ensure Thunderbird has full access to the internet. Auto is not sufficient. That is usually what got us where we are, manually fiddling with settings.

Java API: Limiting search to a specific set of records ids?

Hello.
I'm trying to find a way to do the following: run a search (a pretty simple search, just check for a specific value in a specific field), but instead of running the search on an entire table I want to limit it to a specific set of record-ids, the point being that I know which record-ids I want to search on (I'm getting them from a listener event) and I'd like to make the search more effective.
Any ideas?
Thanks,
Alon

Alon,
Are you on SP6? If so, have you tried the [RetrieveRecordsByIdCommand|http://help.sap.com/javadocs/MDM/SP06/com/sap/mdm/data/commands/RetrieveRecordsByIdCommand.html]?
Regards,
Doug

L9 - all tracks seem to "software monitor" when set to record! BUG?!

Hi Guys,
Not sure if this is another Logic 9 bug or if I am just going crazy!
Often when recording tracking parts, I need to record three or four tracks at the same time. For example, today I was recording vocals, keyboard and bass.
I always monitor the vocals through Logic, so the singer has some reverb in real time. However, for zero latency monitoring on piano and bass, I would usually just monitor them straight through the mixer and not through Logic.
To achieve this in Logic 8, I would press the "software monitoring" button (the green one beside the transport window). I'd also press the orange "Low latency mode" button to make sure the tracks that were software monitored would not have any latency.
Then I would select record for all tracks I was recording, and I would press the "i" button (orange button for input monitoring) for the tracks that I actually wanted to software monitor. Tracks with "i" pressed (usually just vocals) would monitor through Logic with effects, the rest would just be monitored through the mixer.
In Logic 9, this isn't working! Even if I only press the "i" button on one track, ALL of the tracks are coming through Logic. It seems to be applying software monitoring to ANY TRACK THAT IS IN RECORD MODE, even if the input button isn't pressed for that track!
So I either have to have ALL record-enabled tracks software monitored (which induces a little bit of latency for the keys and bass) or NONE (and leave the vocalist without any real-time effects in the mix while he sings).
Am I missing something here? Is there a new setting somewhere that automatically sets all record-enabled tracks to software monitor mode when the software monitoring button is pressed in the transport bar?
OR... is this a new bug?! It's a big one if it is!
I'd love to hear what other people think... or if anyone has a suggestion that might help with this? I might just be missing something obvious here, but I don't think so...
Thanks heaps guys!
Mike

yeloop wrote:
Hi Guys,
Not sure if this is another Logic 9 bug or if I am just going crazy!
Often when recording tracking parts, I need to record three or four tracks at the same time. For example, today I was recording vocals, keyboard and bass.
I always monitor the vocals through Logic, so the singer has some reverb in real time. However, for zero latency monitoring on piano and bass, I would usually just monitor them straight through the mixer and not through Logic.
To achieve this in Logic 8, I would press the "software monitoring" button (the green one beside the transport window). I'd also press the orange "Low latency mode" button to make sure the tracks that were software monitored would not have any latency.
That's not what Low Latency Mode does, it only bypasses high latency inducing plugins, there's a threshold setting in Logic. But that's not the problem...
Then I would select record for all tracks I was recording, and I would press the "i" button (orange button for input monitoring) for the tracks that I actually wanted to software monitor. Tracks with "i" pressed (usually just vocals) would monitor through Logic with effects, the rest would just be monitored through the mixer.
That's not how it works here (on version 8.02)
With software monitoring enabled any track in record mode is passed through Logic's audio engine. Input monitoring only works when a track is -not- record enabled. At least that's how it's working with my RME hardware.
Perhaps you're thinking of "Auto Input Monitoring", try adding that button to the transport bar and see if that's working the way you expect. Any tracks set to input monitoring and record will pass their signal thru Logic, tracks set to record only, will not. The sequencer has to be running so the vocalist wouldn't hear reverb until you actually start recording.
pancenter-

Same set of Records not in the same Data package of the extractor

Hi All,
I have got one senario. While extracting the records from the ECC based on some condition I want to add some more records in to ECC. To be more clear based on some condition I want to add addiional lines of data by gving APPEND C_T_DATA.
For eg.
I have a set of records with same company code, same contract same delivery leg and different pricing leg.
If delivery leg and pricing leg is 1 then I want to add one line of record.
There will be several records with the same company code contract delivery leg and pricing leg. In the extraction logic I will extract with the following command i_t_data [] = c_t_data [], then sort with company code, contract delivery and pricing leg. then Delete duplicate with adjustcent..command...to get one record, based on this record with some condition I will populate a new line of record what my business neeeds.
My concern is
if the same set of records over shoot the datapackage size how to handle this. Is there any option.
My data package size is 50,000. Suppose I get a same set of records ie same company code, contract delivery leg and pricing leg as 49999 th record. Suppose there are 10 records with the same characteristics the extraction will hapen in 2 data packages then delete dplicate and the above logic will get wrong. How I can handle this secnaio. Whether Delta enabled function module help me to tackle this. I want to do it only in Extraction. as Data source enhancement.
Anil.
Edited by: Anil on Aug 29, 2010 5:56 AM

Hi,
You will have to do the enhancement of the data source.
Please follow the below link.
You can write your logic to add the additional records in the case statement for your data source.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c035c402-3d1a-2d10-4380-af8f26b5026f?quicklink=index&overridelayout=true
Hope this will solve your issue.

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How to devide the set of records into groups in SQL itself.

Hi , i am using 10.2.4.0 of oracle.
I am having one requirement, in which i have to devide the set of records into certain groups , so that they can be executed partly but not in one run.
So in the 'SELECT' clause itself i want to asssign particular value (may be 1 )to first 50000 records then another value(may be 2) to next 10000, like wise. And again the total count of records will also varry time to time , if the total count of record set is less than 10000 , then it should only assign '1' to all the records. i will set the group values (1,2,3...) as another column itself.
Can you please let me know if this can be done in SQL without going for PLSQL?

Hi,
That's called a Pagination Query , and here's one way to do it:
WITH     got_grp          AS
     SELECT     x.*
     ,     CEIL ( ROW_NUMBER () OVER (ORDER BY x_id)
               / 50000
               )          AS grp
     FROM     table_x x
--     WHERE     ...          -- If you need any filtering, put it here
SELECT     *               -- Or list the columns you want
FROM     got_grp
WHERE     grp     = 1
;ROW_NUMBER () OVER (ORDER BY x_id) assigns unique integers 1, 2, 3, ... to all all rows, in the same order as x_id (even if x_id is not unique).
CEIL (ROW_NUMBER () OVER (ORDER BY x_id) / 50000) maps the 1st 50,000 of those numbers to 1, the 2nd 50,000 to 2, and so on.
Analytic functions (like ROW_NUMBER) as computed after the WHERE clause is applied, so, to use the results in a WHERE clause, then you need to compute them in a sub-query. If you just want to display the number, and not use it in a WHERE clause, then you don't need a sub-query.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
In the case of a DML operation (such as UPDATE) the sample data should show what the tables are like before the DML, and the results will be the contents of the changed table(s) after the DML.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using.
See the forum FAQ {message:id=9360002}

How to post a table/set of records without losing formatting while posting

how to post a table/set of records without losing formatting while posting in this message forum. Thanks

Most forums have a FAQ. This one is no exception.
It is in the right hand upper corner. It's URL is http://wikis.sun.com/display/Forums/Forums+FAQ
Sybrand Bakker
Senior Oracle DBA

Set maximum record time?

Can I set maximum record time in Logic 8? Recording an hour-long live program unsupervised, & I'd like it to stop afterwards.
(I don't know any problem with continuing recording for hours until the hard drive is full? But it's not necessary.)
thanks

You can use the Auto-Punch In/Out function to set Logic stop recording automatically.
Also, set the bar value for the project end (at the transportbar, under the tempo).
For How long you can record depends on you HD capacity, but also the file format (aif,wav,caf...) the bit depth and the sample rate.
each format has its own limit.
Refer to user manual and check for the best file format for your purpose.

How to create count() measure for certain set of records in BMM Layer

Hello all.
I have a logical table like this one (Table AAA)
Table AAA

--------------------------+
| *Key* | *Name* | 
--------------------------+
| 1-2EMHS9 | AAA |
--------------------------+
| 1-2EMWMO | BBB |
--------------------------+
| NULL | CCC |
--------------------------+
I need to calculate count() of records where Key is not NULL. In this example, this field must return coun() = 2.
I suppose, CASE operator may help me with that, but I do not know for sure how to do this.
Thank you for help,
Alex.

Thank you.
But I must concretise my issue.
I need to calculate number of records (e.g. order_id) that sutisfy appropriate condition (one of columns (e.g. loy_member_id) is set to null).
I created logical column, that returns order_id if condition (loy_member_id is null) is met.
Look at my logical column:
Q Orders (LPM) - must return number of orders where loyalty_member_id is null.
It has an expression:
CASE WHEN NOT "Foxtrot (my) replica"."Sales Orders".LOY_MEMBER_ID IS NULL THEN "Foxtrot (my) replica"."Sales Orders".ORDER_ID ELSE NULL END
So, this returns order_id I need.
But the question is how to count number of order_id's returned by this column on BMM Layer.
When I define my column with next expression:
*COUNT(CASE WHEN NOT "Foxtrot (my) replica"."Sales Orders".LOY_MEMBER_ID IS NULL THEN "Foxtrot (my) replica"."Sales Orders".ORDER_ID ELSE NULL END)*
I receive error:
+[38083] The Attribute 'Q Orders LPM' defines a measure using an obsolete method.+
Thank you,
Alex.
Edited by: Alex B on 3/3/2009 19:59

Problems setting the recording path

I have recorded hundreds of songs successfully by setting the recording path to the project folders on my external hard drive. Now whenever I open a new project and go to record an audio file it ask me every time to set the recording path. I pick the location on my external, click save and then hit the record button and then the whole process starts all over.

does your drive has a Sleep mode (or something like that) preference?that's after a certain time of inactivity...goes to sleep
Might be that..
A

To make a set of records in 1 table to affect another table(dashboards)

Similar Messages

Maybe you are looking for