To make a video 21:9 on Premiere

Hi. I'm trying to make a video 21:9 wide on Premiere, and it's only giving me 16:9.
Does anybody know how to set it up?
Thanks.

Hi All
I am new to iweb and I want to place three button
links on the first page of the website that link to
videos that pop up as seperate windows and auto play.
Is this possible?
I have already placed a single video on a single page
and that works fine but I need several different
format versions, 1 quicktime, 1 flash, and 1 wmv. of
the same video
Any help will be appreciated
here is a super simple solution
1) upload all 3 versions to your .MAC "MOVIES" folder "movie 1 QT", Movie 1 WMV, Movie 1FLA" etc
Then follow the instructions below to create a "picture" of each file adding "for windows users click this player etc" for mac etc then in inspector link the "pictures" you create to the appropriate files this will
1) for windows users auto open the media player & play your video
2) open a blank web page with the QT file & same for flash (although I have never done this with flash it "should work"
here ya go
You need to make a non-movie page, any will do. Start your movie and take a photo of it with shift-apple-4. This will give you an image of the movie and also the Windows Media Player frame. Place this image on your page, give it a title etc and make sure the image is selected. Using the inspector, chose Link to File. When you do thius, navigate to the wmv, QT etc file that corresponds. When you upload your site, that file will be stored along with it and when the link is hit the wmv movie will launch.
good luck!
Jim

Similar Messages

I have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

How do I make a video clip appear smaller in Adobe Premiere 6.5?

Hello,
I am attempting to make a video clip appear smaller with a black background, the way movies often do when they show out takes at the end during the credits. I'm sure this is something pretty simple, but I can't seem to figure it out. Any assistance would be greatly appreciated!

Cannot recall the full line-up of Effects in Pr 6.5, but you should have the fixed Effect>Motion>Scale, which will allow you to resize the Clip. You might need to use Motion>Position in addition. Basically, you will doing a PiP (Picture in Picture), with no Clip below, just the black showing.
Good luck,
Hunt

Horrible video output quality with Premiere Pro CS4 + Adobe Media Encoder

I am trying to make some changes to a DV format file, and output as the same DV format. When the video is brought into Premiere, it looks crisp in the left-hand video box. But, when playing it on the right window and when encoding it, it comes out as a mess with substantial compression artifacts.
What confuses me is, I have experimented with a lot of codecs--even uncompressed AVI. There is no change in the video resolution--source is 720x480, as is output. I am keeping all the pixel aspect ratios the same as the source footage.
What is creating this distortion? I have no scaling of the video whatsoever in the sequence...
Is there some compression box I'm not seeing here?
I've attached a screenshot of a still from the video. As you can see, substantial artifacting around the lettering, making the text unreadable.

Some suggestions and answer at least the 16 questions at the end of the Wiki article.

Can you add batch video transition in adobe premiere cs5.5?

can you add batch video transition in adobe premiere cs5.5?
i want to make a slide show with my pictures and i dont want to add fade in/out 400 times so is there any batch transition or one click fade in/out or at least something like that?

Use:
1. Automate to sequence and select the transition you want, or
2. Apply the transition in the timeline, copy, select the rest of the clips and paste attributes.

How do I rotate a video 90 degrees with premiere elements 9?

I shot a birthday video of the neighbors 5 year old with my Canon T2i camera. Had to turn the camera on its side to get everything in the shot. I can view the video right side up in the canon software but can not make the change permanent so the neighbor can watch it on his computer. Can I rotate the video 90 degrees in premiere and make it permanent? If not, where do I go?
Thanks
Cliff
[email protected]

As Steve says, Rotation with Video, is not so straightforward.
If you oriented the camera on its side, to get more of the image, then I would recommend that after you Rotate the Video, that you Scale it to fit perfectly within the Frame Size. This will result in Pillar Boxing, with black bars on the sides, as with Video, you have a horizontal Aspect Ratio.
If this was just due to the mechanical need to mount the camera sideways, or due to an error, then one could Rotate, then just Scale Up and effective crop the top, or bottom, or both with the Project's Frame Size.
This is often done when taping actors for bluescreen work, but in that case, one is going to eliminate the bluescreen background anyway, and Key the material into a horizontal Video background, so the end result is different, than what you have.
Now, one artistic treatment would be to Rotate, and then use your footage as a PiP, inside of a larger image. Though it was written for doing this with stills in a Video, look at this ARTICLE for some ideas on how this might be used with your footage. The actual application of those techniques will ONLY be limited by your imagination. Hope that it gives you some good ideas.
Good luck,
Hunt

How can I make ShadowPlay footage play nice in Premiere Pro CS6?

nVidia recently released the beta for their new capture technology, "ShadowPlay" which makes it a lot easier for youtubers like me to capture footage of PC games. However, Premiere Pro CS6 fails to handle the audio well, throwing it way out of sync. This apparantly happens because Premiere doesn't support variable framerates especially well. I have no interest in editing in Vegas Pro, but i'd be happy to take the extra time to make the file work well in Premiere. I'm not highly knowledgable though so I'm not sure what, if any, the process would be to do this, so I'd greatly appreciate any help!

>figure a VIDEO EDITING SOFTWARE'S forums would know more about editing video
Yes... and everything I know (plus Steven in #2) is that PProCS6 does not do well with variable frame rate video... and is not likely to ever be updated to add that capability
Which is why I suggested contacting nVidia... since the file format is from them, not from Adobe
I don't/won't use PProCC so have NO idea if it works better with your type of file
I think you can try PProCC free for 30 days, so you can find out for yourself... check in the Cloud forum to find out about 30 day trials
Cloud Forum http://forums.adobe.com/community/creative_cloud

Help - trying to make a video and imovie won't import the required video

the video i need has been converted using handbrak to mp4 and yet remains white when i try to import.
please help as i need to make a video for work and desperately running out of time now.
ruth

for the converted file its:
/Users/ruthmccaig/Desktop/newyouth.m4v
and the original:
/Users/ruthmccaig/Desktop/newyouth.wmv

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?

DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.

How to make a video stop in flash through an external button

Hi everyone!
I have a little problem: I made a flash site with its
different sections, the first of which has a movie clip which is a
"VideoPlaylist". So inside this movie clip I have the player and
the videos sequenced one after the other in a TileList component.
The problem is:
When I go to a different page, the video in the first page
continues to play and so you can still hear the sound, AND WHICH IS
WORSE, when you click the button to return to the first page, the
video starts again with the sound of the previous time still
rolling.
The solution would be, I suppose, when clicking to any of the
buttons that link to another section of the flash document, add
some action script to make the video stop (having in mind that the
video player is inside a movie clip).
I don't know action script, just the navigation basics
necessary for the sections. I did the videoplaylist following this
tutorial:
http://www.adobe.com/devnet/flash/articles/video_playlist.html
Can anyone help me, please!!

You better ask in the Flash forum; this is the Flash Player forum.

How can I export a video with audio from premiere cs 5.5 to a DVD

how can I export a video with audio from premiere cs 5.5 to a DVD

You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How do I make my video into an old tv? Like with the old lines that move up and down and come in and out?

I am trying to make a video for school, into like an old tv show. Any advice?

If you have After Effects..it has some preset FX for exactly this.

Is there a way to make the video I have added to my TOC larger?

I have added a video to my TOC in Captivate and would like to know if there is a way to make it larger? My goal is to have a talking head video play next to and sync with a powerpoint deck. I am able to get the layout how I want it, however, my video (originally 640x480) is showing up very small. I would like to know if there is a way to make the video appear larger.

Afraid not. The TOC video is very limited in size.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time.

I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.

If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ

How can I get video media .MOD into Premiere El. 9?

Videos from my Canon 7d camera and from my Canon ADCHD camcorder (both SD cards) are .MOD files. I open Premiere Elements 9 and click GET MEDIA and it won't recognize the files. It says it cannot open the videos because:
"your system does not have the required compression/decompression codec installed."
When I bought this software a service rep assured me that it would take .MOD files. Why weren't these codecs installed with the program? How can I get these videos to work with Premiere Elements 9?

First, I apologize - I meant .MOV files, not .MOD files. I did download the Quick Time update. Then other problems arose:
Per an e-mail from a forum member, I downloaded an update of QuickTime, which should let me open .MOV files.
Inserted an SD memory card from my Canon camcorder. I selected FLASH, ADCHD... Then GET MEDIA.
Thumbnails appeared labeled MOV001.MOD and ascending numerical order. Then Premiere stopped working and a message appeared:
There is no disk in the drive. Please insert a disk into drive\device\Harddisk1\DR1
So I must have picked the wrong device category?
I couldn't close the error message or the software so used the Task Manager to get out of it.
After a couple more tries I gave up.
Then I tried my DSLR Canon 7d CF memory card. Selected NEW FILE. Clicked on "edit settings" and chose DSLR > GET MEDIA. The downloader began. Up came another message.
Download failed because the files are TOO LARGE.
These are CR2 (RAW) PHOTOS. Do I have to change the format to .jpg or .psd in Photoshop Elements first?
Any suggestions?

To make a video 21:9 on Premiere

Similar Messages

Maybe you are looking for