To make an online interactive map that works with a reservation system which is the best application to use?

I make campground maps and do interactive maps through a third-party program. I want to use something in CC that I can make "hotspots" or id maps that I can interface with a reservation system to show availability. I want the interactive map to work on both mobile and desktop. What is my best program to download and use?
I know html and css but have fallen in love with Muse. I am looking at the Edge Flow, Reflow and Edge Animate. I just need some simple advice as I don't want to waste my time learning a program that doesn't do what I want...
Thanks for any advice.

When you do not have to have it connected to the external monitor, just use the MBP on only battery power. Fastest would be to watch video or play a game. Any CPU intensive application will use the battery faster that 'ordinary' use.
Ciao.

Similar Messages

I need to install Internet Explorer 6 or greater on my iMac to work with a program. How is the best way to do that?

I need to install Internet Explorer 6 or greater on my iMac (intel processor) running MacOS 10.6.8 to work with a program. How is the best way to accomplish this?

There is no way. IE has not been available for the Mac for years now.
Your only option is to install native Windows and use that - either through a bootcamp dual-boot scenario, or use a virtual machine to run windows in (eg. Parallels or VMWare Fusion). Either way, you will need a full retail install disk for Windows.
P.S. the last version of IE for Mac was for PPC machines, and it was discontinued in 2003.

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

Want to make a "small book" theme that works with "buy book" function

I have made a handful of custom themes with the intention of having them printed via the Aperture "Buy Book" function. It seems like this should be possible, given the correct parameters being used when creating a theme.
Not so fast... I have had zero luck in getting this to happen.
Here's the issue
I want to create a theme to mimic the "small book" theme in Aperture
The dimensions on the "official" theme-created books are "3 1/2 x 2 5/8" showing on the aperture screen.
When I use these dimensions on a new theme, the "buy book" feature still does not light up.
What is the secret here?
Is this possible?
Very frustrating.
The reason for this is even more frustrating - my copy of Aperture will not add a Metadata Text Box to an Aperture Small Book themed page - which is a problem for another post (done).
Thanks for any info
JC

Actually, I think you can make custom themes, but if they're out of the size dimensions of the books Apple sells, then you can't used your custom layout for that. The custom layout/book is for if you want to do a custom layout in Aperture and then export the pages as JPGs and send them off to the printer of your choice, one who has the type (or size) of the book you want. Book printing companies should try to come on board if possible and provide third-part plug-ins for Aperture in which customers upload designs directly from the program.

What's the best way to give a user the option of stopping a vi or rerunning it? I wrote something that works but I imagine it's not the best way to do it.

I have a VI that runs a stepper motor then stops. I wanted the operator to have the option of rerunning the VI or stopping it completely. To do this I added a while loop around the entire VI.I have an example VI showing how I accomplished this, but I'm sure there's a more efficient approach. Any suggestions?
Thank you.
Solved!
Go to Solution.
Attachments:
EX 1.vi ‏13 KB

There is almost never a good reason to use the Stop Sign Abort Execution function.
Your while loop is fine. What you really want to do is make a state machine that has at least 2 states. 1. Running the test. 2. Idle, waiting for the user to hit a run button again, or hitting an End program button.

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

HT204387 Is there a Bluetooth mouse that works with ipad3?

Is there a bluetooth mouse that works with ipad3??

This is the only mouse/cursor that works with the iPad.
 Cheers, Tom

What is the best way to record a project to an external recorded via firewire. Also, who makes a recorder that works with a mac?

What is the best way to record a project from the timeline to an external recorder via firewire? Also, who makes a recorder that works with a mac and recordes in realtime? This is possible right?

While theoretically possible, sometimes the camera people disable recording back to tape from the computer due to DRM (digital rights managment) issues. They will allow tape to tape transfers however.
Test your process first is all I can advise.
x

Is there a security surveillance system that works with a MacBook Pro or iPod touch?

Is there a security surveillance system that works with a MacBook Pro or iPod Touch?

Problem is most vehicles can't supply enough power to charge a MacBook Pro battery, not without placing a generator in the engine compartment someplace like police cars and campers have.
Apple provides the MagSafe Airline Adapter but it's designed for 15V, not the 12V of vehicles, then it's only to keep the battery from discharging on airplanes, it won't charge it.
http://store.apple.com/us/product/MB441Z/A?fnode=MTY1NDEwMQ&mco=MTA4NDE2Mjc
"It's designed for 15V DC that you find on airplanes. If you are the DIY type, you can make your own 15V DC automotive socket by using an automotive universal laptop supply to step up the car's 12V to 15V"
I found this online:
http://www.365laptop.us/product_info.php?language=en&currency=USD&products_id=10 64
Notice the device says:
"Input: 11-14V DC 8Amp MAX " - Cars are 12V DC.
Output: -DC 15V.... the same as the Airline Adapter
Looks like one needs to cut and splice the two parts/wires one needs together.
This 12V to 15V conversion is a lot better/streamlined than trying to upconvert 12V DC to a whopping 120 AC and then your Mac's power brick is downconverting 120AC to what it needs in DC to try to charge the battery which the vehicle can't supply the wattage for anyway.
Apple has a patent on the MagSafe adapter, they don't provide a 12V to 15V converter + MagSafe adaptor for the car. It would be nice if they did though.

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

Drivers that work with 4 gig of

Can Creative give any indication of when they will release a set of drivers that work properly on a system that can address 4 gig of ram please. As memory prices are currently so low there are a lot of users migrating to Vista 64 so they can use 4 gig of ram or more so I was wondering when Creativie will stop embarassing themselves with the current drivers that they have and actually address the 4 gig ram issue. I know a lot of users don't have a problem using 4 gig and a creative card but I also know an equal number do and I'm willing to bet the users that don't have very few pci or pci-e devices in their machines. From what I can tell if you have several pci or pci-e devices then the creative drivers crap out - probably because they are pushed beyond the 32bit address space. Please creative fix this URGENTLY - it's not like I'm the first person to complain about it and you can only deny it for so long, you really are embarassing yourselves by not addressing this issue!

Ok I guess I should probably have included some details of the problems instead of just ranting. The problems I am seeing on my system are as follows.. - using the new drivers with 4gig in vista 64 just produces constant static (very loud and much like an untuned TV). Remove 2 gig and it works fine - or remove all other pci / pci-e cards and it works fine. 2 - using the previous drivers occassionally work. That is they will work most of the time but after rebooting the sound will occassionally vanish. The drivers will still be installed and the device listed as working correctly in device manager however there will be no sound. At this point you have to either remove 2gig of ram or resinstall the drivers to get sound working again. I am pretty sure that the problem is with either the creative drivers or the x-fi card itself because?I have?seen?plenty of?posts from other?users suffering with similar problems . For reference my motherboard is an Asus P5B Deluxe, I have an Nvidia 8800GTS card in my primary pci-e slot, a hauppauge nova t-500 tv card in one pci slot and the creative x-fi in another pci slot and am using?4gig of Geil DDR2 ultra ram with a core 2 duo 6600 processor. I have tried moving the x-fi card to a different pci-slot and this makes no difference, I have tried using a different brand tv-card in a different slot and this also makes no difference. It does appear to me that the drivers have major problems when pushed to use a certain part of system memory - hence the reason it works when there are no other expansion cards in the sytstem (or 2gig less addressable space and no need for any bios memory mapping to take place). I hope that better explains the problems. P.S. I realised when I made the post that there would more than likely be replies stating 'works for me' or 'I have no problem'. If it works for you with similar hardware configuration then great there is still hope that I can get my system working correctly.

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.

Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Clob mapping not working with mysql

Hi,
I have an application that i'm running with MySQL and Oracle at the same
time. At some point, i need to use a 'clob' mapping. When i do this, it
just works fine with oracle but it fails with mysql. i have the exception:
Field "com.ennov.prisma.api.document.jdo.AbstractDocumentPO.description"
is mapped as a clob, but should be represented as a different mapping.
If the field is a string and you would like to force it to map as a
clob, add an extension to its field metadata with a key of "jdbc-size"
and a value of
-1.[com.ennov.prisma.api.document.jdo.AbstractDocumentPO.description]
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:132)
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:118)
     at
kodo.jdbc.meta.ClobFieldMapping.fromMappingInfo(ClobFieldMapping.java:46)
if i use a value mapping, it works with MySQL but fails with Oracle (I
have sql error because a clob is used in a distinct select).
In the manual, it is written "Note that some databases can support
string of unlimited length without using a CLOB; when this is the case
the mapping tool will install a value mapping in favor of
this mapping.". So apparently, this is not the case with MySQLDictionary.
To solve my problem and have my code working with both databases, i had
to extend the MySQLDictionary and overwrite the replaceFieldMapping
method in order to replace the clob mapping by a value mapping at
runtime but i don't feel confident to do this kind of modifications by
mysel and would expect this behaviour to be solved quite soon.
Thanks for your help since this problem is urgent for us,
Laurent Czinczenheim

Laurent-
The best solution would probably be to just have separate mappings for
the MySQL and Oracle databases. The easiest way to accomplish this would
be to have a separate setting for each of the databases. E.g.:
kodo.jdbc.meta.MappingFactory: file(SingleFile=true, FileName=oracle.mapping)
kodo.jdbc.meta.MappingFactory: file(SingleFile=true, FileName=mysql.mapping)
That way, you can use a clob mapping for Oracle, and a normal value
mapping for MySQL (since MySQL doesn't need to use the CLOB mapping, and
it isn't very efficient).
For more details on this, see:
http://docs.solarmetric.com/manual.html#ref_guide_mapping_factory
Another solution is to just stick with your custom extension of the
MySQLDictionary, which is a perfectly valid way of having special CLOB
handling in MySQL. Note, though, that CLOB handling is less efficient
than VARCHAR handling, so it should be a mapping of last resort, and
there isn't any need to use it in MySQL.
In article <[email protected]>, czinczenheim wrote:
Hi,
I have an application that i'm running with MySQL and Oracle at the same
time. At some point, i need to use a 'clob' mapping. When i do this, it
just works fine with oracle but it fails with mysql. i have the exception:
Field "com.ennov.prisma.api.document.jdo.AbstractDocumentPO.description"
is mapped as a clob, but should be represented as a different mapping.
If the field is a string and you would like to force it to map as a
clob, add an extension to its field metadata with a key of "jdbc-size"
and a value of
-1.[com.ennov.prisma.api.document.jdo.AbstractDocumentPO.description]
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:132)
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:118)
     at
kodo.jdbc.meta.ClobFieldMapping.fromMappingInfo(ClobFieldMapping.java:46)
if i use a value mapping, it works with MySQL but fails with Oracle (I
have sql error because a clob is used in a distinct select).
In the manual, it is written "Note that some databases can support
string of unlimited length without using a CLOB; when this is the case
the mapping tool will install a value mapping in favor of
this mapping.". So apparently, this is not the case with MySQLDictionary.
To solve my problem and have my code working with both databases, i had
to extend the MySQLDictionary and overwrite the replaceFieldMapping
method in order to replace the clob mapping by a value mapping at
runtime but i don't feel confident to do this kind of modifications by
mysel and would expect this behaviour to be solved quite soon.
Thanks for your help since this problem is urgent for us,
Laurent Czinczenheim
Marc Prud'hommeaux
SolarMetric Inc.

To make an online interactive map that works with a reservation system which is the best application to use?

Similar Messages

Maybe you are looking for