To make it clear, we try to get data, well, automate the data acquisition through the NI-DAQ...
Well,we tried to automate the I/O acqusition through the NI-DAQ card, we tried to calibrate it by the control Calibrate_1200, but it didn't calibrate it and it did not save the file where we did the calibration either.My boss thinks it is due to a misconfiguration of LabVIEW,what do you think of it?
Hi,
I don't think it's a misconfiguration of LV!
I have never used 1200 DAQ device, but I took a look at the 1200Calibrate function and apparently it allows all the calibration features you need. I think you should embed the part of your application where you calibrate the device to see if there's something not correct.
Just a hint, when you use 1200Calibrate what is the value returned by the status output?
Alternatively you could use MAX to create virtual scales associated to your analog channels where you can set offset, gain (slope) and even non-linear scale. All these settings are saved by MAX in a file and applied automatically each time you use the virtual scales you created, refer to MAX online help
Good luck,
Alberto
Similar Messages
-
I purchased 8 songs on September the 18th, for some reason I am not able to dwnload on to my ipod. When I try I get a error that the songs cannot be found. Wha t can I do?
have a look at this support article.
-
is my iMac now useless as i have installed lion and i am no longer able to run cs2 photoshop and illustrator as this is all i use my mac for they should make this clear before buying it i can't afford the latest version of cs2 and cant believe what a waste of money it is.
The newest version of CS2 is CS5. And it was made very clear that these applications would not run in Lion. Not only by Apple, but on all sorts of communities and websites. It has been a long time coming - PowerPC apps were outdated six years ago. Lion does not support Rosetta, and therefore not PPC apps.
you have to options. Go back to Snow Leopard or upgrade your software. (MS Office 2004 and older will not run either).
Cheers -
When I drag an image over a clip to try and get picture in picture the options it gives me are only insert replace and delete not the picture in picture option how do i get the picture in picture option when i drag a picture over a clip?
Go to this. http://help.apple.com/imovie/mac/10.0/#mova1aaa682b . It is the link to show you how to use picture in picture. I had this same problem not too long ago.
-
I'm trying to get youmail. It says that it's installed but there is no app for it. When I try to get an app it tells me that it cannot connect to itunes.
Yes, according to my information that was the model number for what you have. If you aren't sure then open Systemp Profiler and look for the model identifier in the display on the right. Following are the identifiers:
5,2
6,1 (this is the Late 2009; it is model number A1342)
This should provide all you need to pick the correct item. -
Getting powershell to automate the adding of email address policy
I have a need to pull information from a file and automate the process of adding Email Address Policies
I am trying to run a script but I'm hitting dead ends
the first part of the script need to launch and login which I can get to happen but I cant get the second part the of script to actually start up after first part has logged in.
here is everything it needs to do from beginning to end
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -command ". 'C:\\Program Files\\Microsoft\\Exchange Server\\V15\\bin\\RemoteExchange.ps1'; Connect-ExchangeServer -auto -ClientApplication:ManagementShell"
New-EmailAddressPolicy -Name east -IncludedRecipients MailboxUsers -EnabledEmailAddressTemplates SMTP:%s%[email protected]
and then wait and do the
Update-EmailAddressPolicy -Identity
ANY HELP please I've been fighting this for daysWhat kind of errors are you running into? I would encase your values for -EnabledEmailAddressTemplates in single quotes because the '%' is a modulus (see
help about_Arithmetic_Operators) and could be causing you issues.
New-EmailAddressPolicy -Name east -IncludedRecipients MailboxUsers -EnabledEmailAddressTemplates 'SMTP:%s%[email protected]'
Also, you don't have_to run the exchange scripts at the beginning to load up the exchange management shell. You can just load the PSSnapin via the following line:
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book -
I just set up an account at the I tunes store including authorization to charge my pay pal abount. I have also received e-mail confirmation that the account is set up, but every time I try to make a purchase I get a message that says apple ID has not yet been used with the I Tunes Store and it takes me back through the process of authorizing my paypay account. Help!
Once you purchase or download an app it will always be associated with the Apple ID used to download it. When that app requires and update you must use the Apple ID and password used to download it in the first place. The only way around this is to delete the apps the require the old Apple ID and download or purchase them again with the new Apple ID.
-
When my MAC has been asleep for awhile and I move the mouse it makes this digitized blob run across the screen and erases all below it. The only way I have found to get it to quit is restart the computer. Does anyone know what is making it do this?
okay, you know this is for the Mac pro (desktop mac) rather than the MacBook pro, right? That being said, sounds like you have a problem. Turn off your screensaver, if it's on. if it's a hardware problem, eg the GPU, then take it in. If it's software, try running disk Utility and repair permissions. Failing that, get out your original install dvd's, boot up from them, and try "Archive and Install"
John B -
Another thing is that I can't get into my iPhone, as in I can only get to the shiny Apple screen and nothing else.
Read this
Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
i changed my apple ID and whan I try and open the App store the old ID comes up how can I get it to take my new ID/ email address that has been accepted
Sign Out of your Account... Then.. Sign in using the preferred Apple ID.
It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622 -
okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??
Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling -
When I try to get Instagram it says the item you are trying to buy is no longer available
I Don't know why this is happening i deleted apps before and reinstalled them but this is weird pls help
That error message is usually indicative of a problem with the App Store. If you look through the forums, you'll see that a number of people are experiencing the problem. Try again tomorrow.
-
Hi I have a big problem! I have bought a mini ipad but is asking me for the Apple Id and it has a mgs I call the number but is disconnected, how can I unlock or erased this? Or what should I do? Please help. Thanks
Try getting a refund for it. Unless you’re the device’s original owner, Apple won’t unlock it for you.
(120198) -
I tried disabling plug-ins but it didn't solve anything.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r32
# Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE) -
I have the yahoo account in my cell phone with the same configuration.
Both devices have been operating well till last week, when the Thunderbird failed to receive new messages.
It shows that I have 20 messages and after the download, the same last message that I have received appears again
Thanks for your help
Ruidisable email scanning ion your anti virus program.
Maybe you are looking for
-
Hi, I have building a program that will have one split screen and one of them has cl_column_tree_mode at top, and the other has cl_gui_alv_grid at bottom. I can Drag And Drop Lines From ALV GRID to TREE and i can use ONDRAG event of ALVGRID, DROP eve
-
Error in ME6C in Vendor Evaluation
Hello I am running Vendor Evaluation report using transaction ME6C which shows the list of Vendors which are not evaluated. However I observed that system is displaying report for only 1 Purchasing Organization.I mean if the Vendor exists for 5 Purch
-
Is there any "quick fix" code to make a Safari-ready site transfer to IE and Firefox?
I have built a site offline that works absolutely fine in Safari, but when opening in Firefox the browser seems to totally ignore much of the CSS; text changes to default colors, font size alters and some alignment gets messy. Workign on a Mac, I ass
-
Online pdf form field goes wrong
I use adobe acrobat xi. I have created some files and i have uploaded them in online platform. When I open the files from the online platform all the check-boxes, square buttons and X-boxes come out wrong. Everything looks fine when I open the file f
-
I made my own j2ee custom login module and one of the things I wanted the custom login module to do is to clear out the UME roles for the user logging in, "download" the role assignments from an ABAP WAS system, and reassign those roles in UME. I g