To make text entry on KPI field in Appraisal Template

Hi Experts,
Presently i couldn't enter any text in KPI field in Appraisal Template(PHAP_ADMIN_PA), my requirement is to make that as text entry/numeric entry both.
Currently it is allowing me to enter only numeric.
Thanks in Advance
SSHIVAK

in PHAP_CATALOG , what is the value assigned as? Please check the customisation for this field

Similar Messages

Can I make text orientation of a field in ALV 90 degree to horizontal

Hi
I have to make text orientation of a field in ALV 90 degree to horizontal, just like we can do in excel sheet. Is it possible to do so. If yes, then how can we do it? I can not attach the illustration but you can type in some text in excel field and then right click--> format--> on popup window make the orientation 90 degrees.

No dude,
I dont think it is really possible.
Regards,
Ravi

Field Text is a required field for G/L account BP01 45600000

hi mm
i wa screating migo
i ahve entered all the details
but when i go to post i face a error called :
Field Text is a required field for G/L account BP01 45600000
Message no. F5808
Diagnosis
The value for field "Text" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "45600000" in company code "BP01" linked to the field selection for posting key "93".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Text". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
can u plz tell me
Regards
Vinit

Hi Vini,
Goto the TCode OBC4 and select the field status group which you have given in the GL Account BP01 45600000 and make the text as the optional entry. Then your document gets posted.
If you think that other postings will be affected if you change the Field status group, then copy that field status group with another name and make the text as optional in that new field status group and assign the same in the GL Account BP01 45600000. This will solve your problem.
Regards,
Sreekanth....

Field Text is a required field for G/L account 1000 24505000

hi,
while posting MIRO i am facing the problem the following message i am getting
Field Text is a required field for G/L account 1000 24505000
The value for field "Text" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "24505000" in company code "1000" linked to the field selection for posting key "40".
with regards,
jaya prakash

Hi,
To avoid this error in MIRO, under "Basic Data" Tab, enter some text in "Text" field.
OR to make Text as optional, first get the Field status group for GL 24505000 in FS00, under "Create/bank/interest" Tab.
Then go to FBKP, here click on last option "Field status group" and enter Field status variant assigned to your Company Code and PRess Enter.
Here Double click on the Field status group and then double click on "General Data" and make "Text" field as optional.

Field Text is a required field for G/L account YFCL 700009

hi gurus,
Field Text is a required field for G/L account YFCL 700009
Message no. F5808
Diagnosis
The value for field "Text" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "700009" in company code "YFCL" linked to the field selection for posting key "40".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Text". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
how can i solve this
help me

Hi Friend,
Go to FBKP t. code.
Now click on Posting Key
Go to Posting Key 40. Double Click on it. Now click on Maintain Field Status Button. Go to General Data option. Now see the Text Field. you can set it to Optional.
I hope it will work.
Assign points if found useful
Regards,
Jigar

How can I make what a user types in text entry box go to the lms?

Hi,
I have a couple text entry boxes for non-scored short answer responseses---more of a reflective exercise than anything else.
However, I'd like the text the learner types to be recorded by the LMS.
How do I make that happen if it is not an actual assessment?
thanks

Each TEB gets automatically an associated variable with a generic name that is the same as the TEB (I always recommend choosing a more appropriate name). Lookin the General Accordion, you'll see the Variable field.
Do you want more explanation about variables?
http://blog.lilybiri.com/curious-about-variables-in-captivate-4-5
http://blog.lilybiri.com/unleash-the-power-of-variables-in-captivate-5
Those are old posts, but whereas some system variables have changed names, the principles of the posts are still valid.
Lilybiri

Text Entry Field All Caps?

Is there a way to make the text entry field show all caps as an end user types?
Thank you,
cgoebel

Hi Lilybiri,
When you say "after submitting", what does that mean? I need the text to show as all caps as the end user is typing...and can then retain it if the lesson requires using the Retain Text property.
And since this may be possible via JavaScript, anyone have the script to share?
Thank you,
cgoebel

Getting Return Message : Make an entry in all required fields

I need help.
when passing objectid blank i am getting "Make an entry in all required fields" Return message.
i checked through se16 --> PA0006 Table for all employeenumber objectid is blank.
below is my code
proxyaddchange.Connection.Open();
// To refer to the subset that has Permanent Address details
                    string subType = "1";
                    // Get records till this date(yyyymmdd - format)
                    string timeIntervalHigh = "99991231";
                    //timeIntervalHigh = "31.12.9999";
                    // Get records from this date(yyyymmdd - format)
                    string timeIntervalLow = "18000101";
                    timeIntervalLow = "19850101";
                    proxyaddchange.Bapi_Employee_Enqueue(txtSapId.Text,out Return11);
                    proxyaddchange.Bapi_Addressemp_Change(txtSapId.Text,"","","",subType,"123456789",timeIntervalLow,timeIntervalHigh,out Return12);
                    proxyaddchange.Bapi_Employee_Dequeue(txtSapId.Text,out Return13);

Adil,
We are having the exact same problem as you have described. Did you ever find an answer?
We would appreciate any pointers you can provide.
Thanks,
Benny

Text Entry fields in Training mode to Typing field in Demo mode

My SME has decided she doesn't want the learners to actually type in a bunch of fields in the Training sim I'm making and instead wants them to be shown the fields being filled in for them, like the way Captivate does in Demo mode. Is there a way to quickly and easily change Text Entry fields in a Training sim to the Typing format from Demo mode? Does that even make sense? HELP! I'm using Captivate 4 and will be outputing to Flash to embed into an Articulate presentation. Thanks!

Hi there
Probably the best you can hope for is to copy the text to the Windows Clipboard. Then delete the Text Entry Box object and insert a Text Animation. You have two to choose from for just basic typing.
Typing Text
Typing Text with Sound
Then you would paste the copied text as the text to be typed and configure the font characteristics as necessary.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Is there a way to make text that is pasted into text fields be consistent?

People want to paste text into the form fields but they don't want to have to change the font before they paste it and they would like it to change to a consistent font.

And if Drew's excellent reply doesn't do it for you, here's some text I prepared earlier (in best Blue Peter stylee for those of you in the UK... ;-))
The process is this:
1) create your menu background with all of the graphics in a single layer - make it look like you want the menu to be when no button is selected. Add all text, etc for the buttons. Flatten it and save as a pict file, 24bit colour.
2) add a layer to this photoshop image and just add the highlights that you want - a tick, arrow, underline, etc. Hide the background layer and convert this new layer to grayscale (you will need to flatten the image), then save it as a .pict file, 4 bit max - 2 bit could do it, too (You might now want to use the history tool to undo certain steps and save the file as a psd file so that you can make changes if you need to).
3) import both .pict files into DVDSP and set one as the background and the other as the overlay into your menu. In the menu editor, click and drag the mouse over the places where the buttons need to be. Click in one of those button hotspots and look in the property inspector under the 'color' tab. Use the sliders there to adjust what you want the highlights to be in each button state - remember that you are using a simple overlay in gray scale.

Get the error "Make an entry" in the date field

Hallo Experts,
I have the following problem. I have a date filed with value help. In the Getter-Method, I inserted the following code to get a value help:
CALL METHOD CL_CRM_UIU_BT_DATE_TOOLS=>GET_DATE
    EXPORTING
      IV_ATTRIBUTE_PATH   = ATTRIBUTE_PATH
      IR_BTDATE           = current
      IR_MODEL_UTIL       = me
    RECEIVING
      RV_VALUE            = value
    EXCEPTIONS
      CONVERSION_ERROR    = 1
*    others              = 2
so far is everything is ok, I can select my date in the field. But the problem is, if I select an other button without any funktion (no event) in the same viewset I get the error message: Make an entry in field "Date". By the way, the field date is a mandantoy field.
My intention is, that the entry of the date filed is still exist (without to save) if I push an other button to invoke an event.
Could anyone help me?
Best regards,
John

Hi,
You are only displaying the date in getter method. To set the date in the entity it should be done using set_property.
current->set_property( iv_attr_name = 'date field' iv_value = 'value' ).
Check whether the date is set in setter method. If not add the above code.
Regards,
Arun

Text entry fields not able to tab between 2 fields

Hi there,
I have placed 2 text entry fields that are for username & a password, I on publish/preview, I type the username and go to hit the TAB key to move to the password field but nothing happens & cursor does not move to the other field...
I did try a quick search for this question as I thought it must of happened before to others, but could not find what I needed..the answer ;-)
Kind Regards
Rossco
DOH! I just found some more information on tabbing between these fields, so will check that out fisrt........must be Friday (over here)

Hi There,
Welcome to Adobe Forum.
Have you tried using the shortcut option assigned as "Tab" in the action properties of the text entry box as shown in the following image:
Thanks
Loveesh

How to make mutiple shortcut keys in one text entry box

I'm trying to make F8 and Enter work in one text entry box and only one because I need to make the scoring work the way I want it to. I have made both F8 and Enter work, however they are both in seperate text entry boxes when I want both to work in the same text entry box... Please Help, this will solve alot of problems I've been having.

Ok so I tried using advanced actions and failed... here's my attempt on putting 2 shortcuts in one text entry box with different entries like the problem described earlier on this thread:
Note: I have 2 TEB in one slide I tried using in this action.. 1 has variable name PF8, the other has PF82, where I'm trying to have PF82 contain both actions of both TEBs.
1. Went into advanced actions.
2. Action name: Linking2inone
3. Made it a conditional action.
4. In "IF" attempted to use both any and all conditions are true
5. Also in "IF" PF82 contains PF8
6. Actions Jump to Slide 11
7. updated action successfully.
Then I closed advanced actions. I tried making the PF8 TEB have "no action" when correct and tested it... didn't work... then I made PF8 TEB have Jump to slide 11 when correct, cut and pasted it to another slide because I thought that PF8 TEB as a seperate TEB in the same slide was messing with the Advanced Action I'm trying to perform. Therefore, since PF8 was just in another slide, PF8 wouldn't be deleted still having the same action value in advanced actions having PF82 contain the action of PF8; but this failed as well...

How to make "Data Entry Profile" field input unable or display only in CAT2

hi ,
I have requiremnet where I need to make "Data Entry Profile" field in the CAT2 transaction as Display only .That is for each user it should come as default one .
The reason behind this is , user should not change this Profile and maintain an incorrect timesheet entries.
Is there any User exit where i can do this ?
Let me know as this is very urgent requirement.
Points will be definately rewarded.
Thanks .

Hemant,
Got SHD0 transaction and create screen variant for that transaction there you can disable that field.
Create Transaction variant for that transaction and assign previously created screen variant to this transaction varient. actiavte.
Reward if it helps,
Satish

MAKE AN ENTRY IN ALL REQUIRED FIELDS

HI,
I AM USING THE FOLLOWING EXCEL VBA CODE TO TRY AND CALL A TRANSACTION LX02 DIRECT INTO EXCEL.
Public Sub add_bdcdata(BdcTable As Object, program As String, dynpro As String, dynbegin As String, fnam As String, fval As String)
Dim vField As Variant
j = j + 1
BdcTable.Rows.Add
BdcTable.Value(BdcTable.Rows.Count, "PROGRAM") = "RLS10020"
BdcTable.Value(BdcTable.Rows.Count, "DYNPRO") = "1000"
BdcTable.Value(BdcTable.Rows.Count, "DYNBEGIN") = "X"
BdcTable.Value(BdcTable.Rows.Count, "FNAM") = "BDC_OKCODE"
BdcTable.Value(BdcTable.Rows.Count, "FVAL") = "NEXT"
Debug.Print BdcTable.Value(j, "FVAL")
End Sub
Public Sub rfc_call_transaction()
Dim Functions As Object
Dim RfcCallTransaction As Object
Dim Messages As Object
Dim BdcTable As Object
' Create the Function control (that is, the high-level Functions collection):
Set Functions = CreateObject("SAP.Functions")
' Set the rest of Connection object values:
Functions.Connection.System = "QA2"
Functions.Connection.client = "900"
Functions.Connection.user = "mbrough"
Functions.Connection.Password = "st34lhv3"
Functions.Connection.Language = "EN"
If Functions.Connection.Logon(0, False) <> True Then
Exit Sub
End If
Dim iBOB As Integer
iBOB = Range("A1")
Do
' Retrieve the Function object (the Connection object must be set up before Function objects can be created):
Set RfcCallTransaction = Functions.Add("RFC_CALL_TRANSACTION")
' Set the export parameters
RfcCallTransaction.exports("TRANCODE") = "LX02"
RfcCallTransaction.exports("UPDMODE") = "S"
Set BdcTable = RfcCallTransaction.Tables("BDCTABLE")
' Set the tables parameter and add the data for the call transaction
add_bdcdata BdcTable, "RLS10020", "1000", "X", "", ""
add_bdcdata BdcTable, "", "", "", "BDC_CURSOR", "S1_LGNUM"
add_bdcdata BdcTable, "", "", "", "BDC_OKCODE", "=ONLI"
add_bdcdata BdcTable, "", "", "", "S1_LGNUM", "900"
add_bdcdata BdcTable, "", "", "", "S1_LGNUM", "ActiveCell"
add_bdcdata BdcTable, "", "", "", "S1_LGTYP-LOW", "K01"
add_bdcdata BdcTable, "", "", "", "BDC_SUBSCR", "SAPLSSEL"
add_bdcdata BdcTable, "", "", "", "BDC_SUBSCR", "SAPLSSEL"
add_bdcdata BdcTable, "SAPMSSYO", "0120", "X", "", ""
add_bdcdata BdcTable, "", "0", "", "BDC_OKCODE", "=BACK"
add_bdcdata BdcTable, "RLS10020", "1000", "X", "", ""
add_bdcdata BdcTable, "", "", "", "BDC_OKCODE", "/EE"
add_bdcdata BdcTable, "", "", "", "BDC_CURSOR", "S1_LGNUM"
add_bdcdata BdcTable, "", "", "", "S1_LGNUM", ActiveCell.Value
'End SubCall the function (if the result is false, then display a message):
If RfcCallTransaction.Call = True Then
Set Messages = RfcCallTransaction.imports("MESSG")
MsgBox Messages.Value("MSGTX")
Else
MsgBox " Call Failed! error: " + GetCustomers.Exception
End If
iBOB = iBOB + 1
Loop Until IsEmpty(ActiveCell.Offset(iBOB, 0))
Functions.Connection.Logoff
End Sub
I KEEP GETTING AN ERROR MESSAGE SAYING 'MAKE AN ENTRY IN ALL REQUIRED FIELDS' AND THEN NOTHING DOWNLOADS INTO EXCEL.
CAN ANYONE HELP PLEASE?
THANKS

When I run this transaction through SAPgui I only have to fill out the field S1_LGNUM, and I have specified this in my code.
Is my code below correct?
Public Sub add_bdcdata(BdcTable As Object, program As String, dynpro As String, dynbegin As String, fnam As String, fval As String)
    Dim vField As Variant
    Static j As Integer
    j = j + 1
    BdcTable.Rows.Add
    BdcTable.Value(j, "PROGRAM") = "RLS10020"     ' Program Name
    BdcTable.Value(j, "DYNPRO") = "1000"        ' Dynpro Number
    BdcTable.Value(j, "DYNBEGIN") = "X"    ' X if a screen
    BdcTable.Value(j, "FNAM") = "BDC_OKCODE"            ' Field Name
    BdcTable.Value(j, "FVAL") = "NEXT"            ' Field Value
End Sub
As i have seen this in examples where it looks like below.
Public Sub add_bdcdata(BdcTable As Object, program As String, dynpro As String, dynbegin As String, fnam As String, fval As String)
    Dim vField As Variant
    Static j As Integer
    j = j + 1
    BdcTable.Rows.Add
    BdcTable.Value(j, "PROGRAM") = program    ' Program Name
    BdcTable.Value(j, "DYNPRO") = dynpro        ' Dynpro Number
    BdcTable.Value(j, "DYNBEGIN") = dynbegin    ' X if a screen
    BdcTable.Value(j, "FNAM") = fnam            ' Field Name
    BdcTable.Value(j, "FVAL") = fval            ' Field Value
End Sub
Thanks

To make text entry on KPI field in Appraisal Template

Similar Messages

Maybe you are looking for