To Micheal S, thanks for the reply, perhaps some additional information can help you help me.
I am developing a monitoring system for a plating line. I have pH sensors going into a fieldpoint analog input module. I get a reading in volts but I am not sure how to transfer that into an actual pH reading. What do you think? Thanks for your help, john
Once you get your voltage reading you can convert that reading into pH with some math or using a formula node. For example, I have seen that the specs for pH sensors will have an output parameter of XX.X mV/pH so you could simply divide your voltage (in mV) by XX.X which will give you pH.
Similar Messages
-
Thanks for your reply to my question regarding sound in iMovie. However I cannot follow the links you sent as they upload too slowly and therefore the instructional movie keeps stopping waiting for the content toload. Surely theremust be a solution for this??
Thanks in advance
lollyPlease continue posting in your original thread.
With the amount of traffic on these forums it is impossible to chase around finding this. -
Hi thanks for the reply for my airport express voltage problem
dear sir as i have a p.c window 7 and while connecting Air port express .its showing you need windows 7 SP 1 OR NEWER ,i have alredy downloded airport utility,so please advice me what step to take or what to download from net.
thanking you once again.Hi zeg61 and welcome to Discussions,
Airport Express Lights
You might have to do a hard reset.
Airport Express Reset
When you do this reset make sure the Airport Express is in the same room near your computer ( the one you are setting the AE settings ).
Hope this helps -
thanks for yr reply
sofar that is clear
and indeed, after I
changed the details at my apple ID account
from the old Dutch credit card to the new Suisse credit card
when I wanted to update my existing apps on the iPhone, I
got the message that I can only use the Suisse Apps store.
But how does that work?? Can I still update my existing Apps ?? How can I make my iPhone connects to the Suisse App Store ??
thanks
Best regards
[email protected]HI..
I responded to you here > https://discussions.apple.com/message/18112516#18112516 -
Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked. -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
I have an Ipad 2 and here is what I am trying to accomplish. On my laptop I connect to a remote desktop connection to access a shared program we use for reporting. How do I set up my Ipad to access this remote server? Thanks for the help.
Close ... before going for a specific Cisco app ... lets find out some details:
Host we need more details:
What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting). -
my ipad is hung what to do?i cannot switch off for 2 weeks because of i cloud it say full and cannot be back up i try to close or open the settings but nothing happen anyone can help me thanks a lot in advance
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts -
I was setting up my Airport and thought the first set up dod not go through, then I set up again and ended up with two wireless accounts. I use it for the prointer and the iPad, and I can see both accounts in the iPad. How do I get rid of one account? Thanks for the help!
me.com accounts can be used for iCloud. See the FAQ section in:
<http://support.apple.com/kb/ht4895>
but it may be too late if you have already created a new AppleID.
A few years ago Apple said they were working on allowing account merging, but it never happened (maybe objections from copyright holders). -
I have upgraded Snow Leopard with Combo 10.6.8, the supplemental update and fixed permissions, but still can't open app store to upgrade to Mountain Lion. I am on the Cayman Islands. Thanks for the help!
Don't be afraid to bump this topic. There's also an App Store forum where you might repost this question, but give some of these details in your post. I'd rephrase the topic to something like "Can't use App Store to upgrade." (Instead of can't "open".) Then give the details.
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store -
I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner and get a drop down list. However, the screen is then white with "iTunes" in the middle. Any suggestions? Thank you.
Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If your computer has one of the LSPs listed you may have to reset winsock.
If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues -
After running the installer the dock the opens up is blank with a blue dotted loading emblem and will not do anything?????. I attempted to quit the install and restart but it produced the same result. New member here, thanks for the time.
Avanmanandfriends please see Creative Cloud app doesn't open and hangs on spinning progress wheel - http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html which discusses how to resolve your current error.
-
Hello I have a 24-inch iMac 2.16GHz Intel Core 2 Duo with OS X Leopard 10.5.8. Is the Mac I kompaktibel with the new OS X Lion Mountain? Thanks for the answer. E.Monti
Hi,
This is the compatibility list
http://www.apple.com/osx/specs/
if your iMac is mid2007 or newer - yes.
You will need to upgrade to 10.6 (Snow Leopard) first buy DVD from online apple store
Then to 10.7 Lion - buy and download via Store App included in SL
and then 10.8 Mountain Lion upgrade the same steps as Lion -
Thanks for the response, Peggy. I didn't find an update for the update of OA X10.6, but I did update Java to update 7. I also followed your instructions and deleted the preferences files. However, I still get the same dialog box: "Appleworks 6 Quit Unexpectedly". Any other ideas.? Many thanks,
SprinklesHi Sprinkles: You may need to repost your response in the original thread to get Peggy's attention. I have included the link to your previous thread below.
https://discussions.apple.com/message/18043809#18043809
Stedman -
Hi. My iPad has pb with his own light. Like all the lights for the screen don t work... You have like shadow on one edge. I bought two weeks ago! Thanks for answering
Make an appointment with the Genius Bar at your Apple Store. If they determine there is an issue with your iPad, it will be replaced.
Maybe you are looking for
-
Data buffer(st04) is lower and lower
recently, i find such an information in our sap system using ST04. Following is message: Data buffer Size kb 3,194,880 Quality % 89.4 the quality value is lower an lower. why? what should i do? please help me !
-
ClassNotFoundException while invoking EL function during render response
I wrote a simple EL function to retrieve the clientId of a UIComponentBase object -- I'm generating some javascript. The first time I load the page (without a submit), the page generates just fine, including the javascript output that successfully in
-
Preferences in Mail Wont Close
Hi all, 10.4.5, with the latest (3/13/06?) security update; mail w/some 3rd party add ons: SpamSeive, Mail ActOn and MailTags. All was well until the latest security update (at least I think thats when this started). Now when I open mail preferences,
-
HT204053 how do i sync my iphone to my new ipad
How do i sync my new ipad 4 with my iphone 4s
-
hello, can someone help me find a way to delete a shortcut icon on the web2go home page? I have a duplicate and want to delete one but can't find a way.....there is no customize tab on the bottom of the page!!