To much of the same contakts

Hello community,
after switching to iOS7 and MacOS 10.5 I have many contacts up to 5 times in my address book.
Which of these can I delete? I'm afraid they irretrievably lose?
thank you

sry.tu Mac OS 10.9

Similar Messages

Mac Pro turns itself on every day at the same time

My Mac Pro suddenly decided to start turning itself on every day at 6:00:12pm local time (12:00:12AM GMT). It turns on at exactly 12 seconds after 6:00pm every day.
I recently upgraded to OSX 10.5 and installed the point update. It did it before the point update and continues to after the point update.
I have had it since April and it has never done this before. It did NOT do this under 10.4.
I have the options in system settings to NOT wake on LAN event and NOT restart after power failure. It is NOT set to automatically turn on but it is set to automatically turn itself off at 1:00am.
These settings have not changed since 10.4 and I have verified them. No other software has recently been installed since the update to 10.5. I did update the Wacom driver to the new Leopard driver. That is all. I have the Wacom tablet unplugged from the computer.
Any ideas?
Here is the console log from yesterday. It pretty much looks the same every day.
Log file:
Nov 18 18:00:12 localhost com.apple.launchctl.System[2]: kern.maxproc: 532 -> 512
Nov 18 18:00:15 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 18 18:00:15 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 18 18:00:16 localhost kernel[0]: npvhash=4095
Nov 18 18:00:16 localhost DirectoryService[12]: Launched version 5.0 (v514)
Nov 18 18:00:16 localhost kernel[0]: hi mem tramps at 0xffe00000
Nov 18 18:00:16 localhost kernel[0]: PAE enabled
Nov 18 18:00:16 localhost kextd[11]: 412 cached, 0 uncached personalities to catalog
Nov 18 18:00:16 localhost kernel[0]: 64 bit mode enabled
Nov 18 18:00:16 localhost kernel[0]: Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
Nov 18 18:00:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
Nov 18 18:00:16 localhost kernel[0]: vmpagebootstrap: 973126 free pages and 75450 wired pages
Nov 18 18:00:16 localhost kernel[0]: migtable_maxdispl = 79
Nov 18 18:00:16 localhost kernel[0]: 88 prelinked modules
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=2 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=3 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=5 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=6 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=7 Enabled
Nov 18 18:00:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=4 Enabled
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Nov 18 18:00:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Nov 18 18:00:16 localhost mDNSResponder mDNSResponder-164 (Nov 4 2007 13:23:04)[16]: starting
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Nov 18 18:00:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Nov 18 18:00:16 localhost kernel[0]: calling mpopolicyinit for mb
Nov 18 18:00:17 localhost kernel[0]: Seatbelt MACF policy initialized
Nov 18 18:00:17 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Nov 18 18:00:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Nov 18 18:00:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Nov 18 18:00:17 localhost kernel[0]: MAC Framework successfully initialized
Nov 18 18:00:17 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
Nov 18 18:00:17 localhost kernel[0]: devfsmakenode: not ready for devices!
Nov 18 18:00:17 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Nov 18 18:00:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Nov 18 18:00:17 localhost kernel[0]: mbinit: done
Nov 18 18:00:17 localhost kernel[0]: Security auditing service present
Nov 18 18:00:17 localhost kernel[0]: BSM auditing present
Nov 18 18:00:17 localhost kernel[0]: rooting via boot-uuid from /chosen: A3FDED86-37C7-3DF1-9FCC-6C589DDC1077
Nov 18 18:00:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Nov 18 18:00:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3500630AS P Media/IOGUIDPartitionScheme/Customer@2
Nov 18 18:00:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Nov 18 18:00:17 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe8072a0; max speed s800.
Nov 18 18:00:17 localhost kernel[0]: Jettisoning kernel linker.
Nov 18 18:00:17 localhost kernel[0]: Resetting IOCatalogue.
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 0
Nov 18 18:00:17 localhost kernel[0]: Matching service count = 18
Nov 18 18:00:17: --- last message repeated 4 times ---
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7a
Nov 18 18:00:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:19:e3:66:97:7b
Nov 18 18:00:17 localhost kernel[0]: Previous Shutdown Cause: 5
Nov 18 18:00:17 localhost mDNSResponder[16]: Adding registration domain tjasher.members.mac.com.
Nov 18 18:00:17 localhost mDNSResponder[16]: Setting up AutoTunnel address FD14:A58A:53D0:1166:0219:E3FF:FE66:977A
Nov 18 18:00:19 localhost fseventsd[42]: bumping event counter to: 0xfa0a6 (current 0x0) from log file '00000000000f52e0'
Nov 18 18:00:22 localhost kernel[0]: Intel8254x -- Link Down -- 00:19:e3:66:97:7a -- called by enableHardware() --
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:25 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[37]: Login Window Application Started
Nov 18 18:00:26 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
Nov 18 18:00:22 localhost bootlog[48]: BOOT_TIME: 1195430411 0
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:26 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
Nov 18 18:00:26 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0x8040
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Error: controller missing password file "/etc/xgrid/controller/client-password"
Nov 18 18:00:26 MacPro com.apple.launchd[1] (com.apple.xgridcontrollerd[28]): Exited with exit code: 2
Nov 18 18:00:27 MacPro kernel[0]: Intel8254x -- Link Up -- 00:19:e3:66:97:7b -- called by interruptOccurred() --
Nov 18 18:00:26 MacPro rpc.statd[33]: statd.notify - no notifications needed
Nov 18 18:00:26 MacPro xgridcontrollerd[28]: Notice: controller failed
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
Nov 18 18:00:26 MacPro configd[15]: setting hostname to "MacPro.local"
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0xcde1
Nov 18 18:00:26 MacPro /usr/sbin/ocspd[64]: starting
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
Nov 18 18:00:27 MacPro kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x7c00
Nov 18 18:00:27 MacPro kernel[0]: -- PHY Specific Status Register (17d) = 0xaf08
Nov 18 18:00:27 MacPro kernel[0]: Intel8254X -- Negotiated Speed: 1 Gb/s, Duplex: Full, Flow Control: Receive Pause Enabled, Transmit Pause Enabled
Nov 18 18:00:27 MacPro kernel[0]: sandbox-exec 28 PARENTAGEEXEC_AND_DROPPROFILE SBF /usr/libexec/xgrid/xgridcontrollerd 13 (seatbelt)
Nov 18 18:00:28 MacPro kextd[11]: writing kernel link data to /var/run/mach.sym
Nov 18 18:00:30 MacPro com.wacom.wacomtablet[90]: TabletDriver[90]: Env RUNWITHLAUNCHD is set to 1
Nov 18 18:00:31 MacPro loginwindow[37]: Login Window Started Security Agent
Nov 18 18:00:31 MacPro Parallels[106]: Loading Hypervisor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels Hypervisor started.
Nov 18 18:00:32 MacPro Parallels[112]: Loading Monitor module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
Nov 18 18:00:32 MacPro kernel[0]: [Parallels] Parallels VM observer thread started
Nov 18 18:00:32 MacPro Parallels[114]: Loading ConnectUSB module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[116]: Loading Network module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
Nov 18 18:00:32 MacPro Parallels[118]: Loading Virtual Ethernet module...
Nov 18 18:00:32 MacPro com.apple.SystemStarter[31]: kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic1: Ethernet address 00:1c:42:00:00:01
Nov 18 18:00:33 MacPro kernel[0]: comparallels_kextPvsvnic0: Ethernet address 00:1c:42:00:00:00
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 7, addr fe80::21c:42ff:fe00:1, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro ntpd[25]: bind() fd 28, family 30, port 123, scope 8, addr fe80::21c:42ff:fe00:0, in6is_addrmulticast=0 flags=17 fails: Can't assign requested address
Nov 18 18:00:33 MacPro Parallels[121]: Staring DHCP/NAT daemon...
Nov 18 18:00:33 MacPro pvsnatd[123]: en3: DHCP/NAT for 10.211.55.2-10.211.55.254 netmask 255.255.255.0
Nov 18 18:00:33 MacPro pvsnatd[123]: en2: DHCP for 10.37.129.2-10.37.129.254 netmask 255.255.255.0
Nov 18 18:00:34 MacPro Parallels[125]: Restarting InternetSharing...
Nov 18 18:00:34 MacPro Parallels[127]: Restaring CiscoVPN...
Nov 18 18:00:34 MacPro com.apple.SystemStarter[31]: /Library/StartupItems/Parallels/Parallels: line 62: /System/Library/StartupItems/CiscoVPN/CiscoVPN: No such file or directory
Nov 18 18:00:34 MacPro Parallels[129]: Initialization complete.

Updates installed by Software Update are "delta" updates - they go from 10.x.y to 10.x.y+1, and are customized for a particular Mac model. It appears that in this case they also patch some files instead of replacing them fully. The "combo" update will update 10.x.anything to the latest 10.x.y, it'll update any Mac model, and in this case it appears they contain full files instead of patches. The delta updater for 10.5.1 is about 39 MB; the combo updater is about 110 MB. You can download the combo updater from the Support site. Sites such as www.macfixit.com often recommend installing the combo updater instead of, or after, the delta updater, as it often solves mysterious problems. One specific example is the numerous "SUID" messages when doing a "repair permissions" - the combo update gets rid of all but one, and that one is specifically stated by Apple to be okay. Of course, no guarantees, but the combo updater is a reasonable thing to try.
Doug

Feasibility for a new production system in the same environment

Dear friends,
Our management has come up with a requirement of expansion of SAP environment to cover up users in a different country for their francise over there. The options we are considering are below:
1. Implementing a whole new setup ( ECC, EP,BI, PI,Trex).
2. Expanding the lease lines between the sites in both the countries and providing access to the present setup itself with enhancement in the current hardware configuration.
or is it a good practice to keep a new Production system in the other country and add a new delivery route for the new production system within the current transport route ? How the license part may be taken care in these cases ?
Your suggestions are welcomed.
Many thanks,
SUJIT

Hi Sujit,
The answer to this question really depends on whether the new country is going to share much of the same configuration with some tailoring to local laws and requirements. If the system is going to be the same, then there is now reason to deploy a new system unless you are reaching technical limits for hardware. For ease of management and usage, then having one system is preferred. You can then upgrade your network to cope with the increased load and hardware as required.
Hope this helps,
Graham

Messenger and Contacts not the same over different devices

I upgraded to iOS8 on my 5S and iPad 4th gen.
Then I updated my MBP to Yosemite Beta - just in case I need to utilize iCoud Drive. I'm not using it.
On my phone, I noticed that my contacts got jacked up. First noticed it in my Favorites, where names used to be, there's numbers. I notice much of the same thing when I open Messenger on the phone. On my computers and iPad, Messenger has all the contact info the same - the way it used to be.
I've been around since the @mac.com days, so I have that id. As well as a @me.com from that transition. And of course, the @icloud.com id. I did notice, that one of the device (don't remember which one) was using the iCloud id while the rest wear using the me.com id. Figured that it wouldn't matter, since they're all Apple id's that have merged all my data over the years.
thoughts?
thanks

What do you mean by "synched on the iPad and iPhone"? Are you using iCloud?

Two Lacie drives failed at the same time??? HELP!

I have 2 Lacie drives, one older d2 250GB drive probably 4 years old and a newer d2 Quadra 500GB drive that is less than a year old (I think). I go to get on my computer this morning and needed to access one of the drives (the 250), but when selecting it, nothing was happening and finder froze. I couldn't get the system to respond so I turned my G5 off and back on and the drive than sounded like an airplane trying to take off. It wouldn't spin up at all. I'm pretty sure it's toast.
So I go to look at my other drive which is the backup drive (connected via FW800) and it seemed ok. I was able to pull some data off of it. While I was sitting there, TimeMachine started a backup and that's when the 500GB drive started clicking and the backup failed. I was able to eject it and turn it off/on, but it took a very long time to show up in Finder. So I ejected it again, turned it off, unplugged pwower from it, powered down my G5 and than powered that back up with the drive not attached. When I went to plug the power back into the drive I had a little problem - I couldn't remember which of the two cords from the 2 drives was the right one! So I tried the one that had the thicker cable and the drive wouldn't power up at all and than I tried the other one and it did power up, but ultimately had exactly the same problem as reported above.
So, when I get home from work, I'm going to try and reset the NVRAM which may or may not clear the problem with the 500GB working, but failing that, I'm in a real pickle. That backup drive has the only copy of whats on the other external! Do you have any other suggestions here? Can anyone clarify which power cube goes to which drive?
For the failed drive, is it worth it to open it up and replace the drive with a new one or just toss it and get something else? I'm in a real pickle here...

I spoke with Lacie support a few days ago and they suspect that the one drive had a catastrophic failure and the other (the newer one) was just a bad power supply. They are sending me a new PS and suggested that I at least try to remove the other drive from the case and see if I could get another system to read it. It pretty much did the same thing when it spun up - sounded like an airplane taking off.
Also, they told me that as a previous customer I am entitled to a discount on a new drive if I provided sales with the ticket number for the problem. So I called to see how good the discount was and I was pleasantly pleased. I ordered and have already received a 2TB Raid and have it installed as a RAID 1 for my main backup drive.
Now that leaves me with my old backup drive still waiting on a new PS to see if it will spin up. If it doesn't, I'm really up the creek since it was the backup for my system, including the other failed drive.
If it DOES spin up and I can access the data, that leaves me with another question. Can I access the Time Machine backups directly for the old drive? If so, will copying the latest backup folder give me all the data or is it spread out somewhere? Hopefully this will be my dilemma, cause at least the data will be there!
Thanks.

Can I sync my iPad to the same Mac that my iPhone is synced to

I just got my iPad and wasn't sure if I am able to sync it with the same iMac that my iPhone is synced too? Any help would be greatly appreciated. I don't want to wipe out all of my iTunes library.

If you want to have the mostly same content on both devices - it probably makes more sense to restore your iPad from the iPhone backup. this will put all of your app settings and email settings onto the iPad and any app data and game saves as well will transfer to the iPad.
You still want to sync the iPad so that all of the apps and photos that are in your iTunes library transfer over to the iPad. Restoring from the backup doesn't restore apps, music, synced photos, movies, books, TV shows and podcasts - you will still need to sync that content to the iPad.
I have pretty much have the same content on my iPad and on my Touch, but I eliminated the Movies and TV shows from the Touch and some apps as well. Remember that iPhone specific apps may run OK on the iPad - they will run in the iPhone smaller screen size and while you can double the size by tapping on the 2X button in the apps, they will be lower resolution because you just doubling the size of the pixels and the apps look kind of crappy on the iPad - they may work - they just look bad.
I do not auto sync at all. Nor does iTunes open automatically when my iDevices are connected. I start iTunes on my own and I select all of the content - piece by piece - app by app and so on - as I go along. Once you get through the initial set up - iTunes remembers each device and it's content for the next time that you sync.

Internet Explorer problem (two windows pop up at the same time when started)

I have new T61 with vista business. From unknown time period, whenever I double click to open IE, two taps (in one window) pop up. I don't know how to fix it. Please advise me. Thank you in advance.

I spoke with Lacie support a few days ago and they suspect that the one drive had a catastrophic failure and the other (the newer one) was just a bad power supply. They are sending me a new PS and suggested that I at least try to remove the other drive from the case and see if I could get another system to read it. It pretty much did the same thing when it spun up - sounded like an airplane taking off.
Also, they told me that as a previous customer I am entitled to a discount on a new drive if I provided sales with the ticket number for the problem. So I called to see how good the discount was and I was pleasantly pleased. I ordered and have already received a 2TB Raid and have it installed as a RAID 1 for my main backup drive.
Now that leaves me with my old backup drive still waiting on a new PS to see if it will spin up. If it doesn't, I'm really up the creek since it was the backup for my system, including the other failed drive.
If it DOES spin up and I can access the data, that leaves me with another question. Can I access the Time Machine backups directly for the old drive? If so, will copying the latest backup folder give me all the data or is it spread out somewhere? Hopefully this will be my dilemma, cause at least the data will be there!
Thanks.

Multi-Time dependent Logging/Viewing from the same source

The problem:
I have one device, I would like one loop to run and wait a given ammount of time - this loop will query the device for the data displayed in the UI, another loop is to query the device at other differant times and log the data to a file.
Say for example the view is updated with fresh data every 1/10th of a second and the log is written with data every 1/2th a second.
How can I get these to run concurently?
For example, in java I would create two differant threads and set the sleep time in both to differant times, calling start() on each would give me two differant threads within the same program. What is the process to get this kind of "process detachment" behaviour in LabView?

> I have one device, I would like one loop to run and wait a given
> ammount of time - this loop will query the device for the data
> displayed in the UI, another loop is to query the device at other
> differant times and log the data to a file.
>
> Say for example the view is updated with fresh data every 1/10th of a
> second and the log is written with data every 1/2th a second.
>
> How can I get these to run concurently?
>
> For example, in java I would create two differant threads and set the
> sleep time in both to differant times, calling start() on each would
> give me two differant threads within the same program. What is the
> process to get this kind of "process detachment" behaviour in LabView?
>
I agree with the other post that you probably don
't need parallel tasks
here, but if you do, here goes.
Make two loops, side by side, over and under, just not one inside the
other. The two loops will multitask and run in parallel as long as they
don't have dataflow connections. Drop a Wait Ms node inside the loops
to control the loop speed, and you pretty much have the same as the Java
solution, but simpler IMO. If the loops need to synchronize for some
reason, there are synchronization primitives in the advanced palette,
but again, it will likely be easier to put the tasks in the same loop
and simply make a modulo counter to control how often the various tasks
fire.
Greg McKaskle

I can't update Fiefox since update 10.o1 or 10.02. Every time I try to I get the same message, "7 - ZIP File is missing" I don't know how or where to correct this problem. I'd really appreciate any help that corrects this problem. Thanks sovery much,

Missing "7-Zip File"
Hello,
I haven't been able to update Firefox since 10.01 or 10.02 because every time I try I get the same message the "7-ZIP File" is missing. Then the update fails. I've submitted this problem to Mozilla Firefox and, got an immediate reply of " they are researching your problem".
Well, you can tell how long that has been. Is there anything I can do, or any where I can go to get the file I need?
Any constructive help would be very much appreciated! I'm not sure If I'll ever be able to find where this is located. But I do appreciate help just the same.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Disable your anti-virus software temporarily to see if that makes installing work.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 11.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

24"iMAC panel much higher quality than 23" Acd, its the same as Samsung ?

Hi!
According to my research on 24" LCD panels, they almost all use samsungs S-PVA screen, including 244t, Dell 2407WFP , Acer, HP, etc etc..
I notice a huge jump in quality compared to the 20" or 23" ACD, mainly due to the lack of grainy/sparkly/video noise/screen door type layer of the former screens.
Can you confirm that this is indeed a samsung panel?
The ACD's are LG's on IPS.
Well whatever it is, I can't believe how wonderful this display looks, its the first time I can say that a display can replace a CRT. And its much sharper to boot.
I found an almost undying similarity to the 244t by Samsung, and I'm interested in getting that to accompany my MAC pro.

I just came to my local Apple dealer to get help and they have never encountered this before. Questions they asked that made it less clear for them; they were shot in jpeg and I have exported using every setting all yielding the same results.
This sounds to be a software issue and I encourage Apple's staff to investigate it.

My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order.

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

For the last month or so my icloud won't back up, it keeps telling me that there is too much storage and I need to delete some data. But I have deleted between 3-400 photos and it is still saying the same, can anyone please help

If they were deleted from your camera roll that should have resulted in a corresponding decrease in the estimated size of your next backup.
If it's still saying that you don't have enough storage to back up, read through this article: http://support.apple.com/kb/ht4847. It provides some suggestions for reducing your iCloud storage, such as deleting unneeded email.
The other area to look at is your text messages. These are included in the backup. If you have lots of photos and videos attached to your messages, that can significantly increase the size of your backup. If that's the case, deleting these may make a big difference.

HT4623 I lost my apps and iTunes after a restore, but it says there isn't enough space on the iPhone 4. How do I know how much space needs to be freed up? I keep deleting photos and videos, but I'm still getting the same message.

I did an iphone 4 software update. It then asked me to do a "restore" in order for me to be able to use the latest iTunes. I did a "restore" to "factory settings" (this was the only option listed) thinking I'd be able to sync later and get everything back and ended up losing all my purchased apps and iTunes. When I open iTunes, "Welcome to your new iphone" and it says I can re-do the "restore" and choose my lastest update. I assume this will give me back my apps and iTunes. When i choose to do this, it says there isn't enough space on the iPhone. How do I know how much space needs to be freed up? I keep deleting photos and videos from the phone, but I'm still getting the same message every time I re-try. I don't want to delete everything, but I don't know what to do...? Thanks!

Thanks but I think it has something to do with the 'restore'. in the newest iTunes 11, when I click on the tab "iphone", it redirects me to the "welcome to your new iphone" page and asks about doing a 'restore'. I already did a 'restore', but it went to the original factory settings and I want to 'restore' to my lastest back up as of April 12. When I choose that option, it says my iphone doesn't have enough space. I don't know how much I need to delete in order to make it work. I've deleted lots, but it only has 4.1 GB available. I'm not sure why this isn't enough to do a 'restore'. I don't want to delete all my photos and videos, but maybe I will have to?...7.7GB is used up for that. I can't sync or do ANYTHING...

How many choices to create a station on Itunes Radio can be live at the same time? Only 10 choices show in ATV interface. Does the 11:th choice render the first one obsolete? In that case: som much for personalized radio.

That's pretty much what I would like to know so I can stop trying to make endless corrections when Itunes wants to entertain me with Blink 182. I would way that any personalized radio service that means serious business and wants to extend beyond the hit crowd needs an equallly serious algorithm to edit the music.

Unfortunately, the message pretty much says it all.
What it does not tell you is that your Time Machine backups are corrupted and Time Machine cannot repair them, so it wants to delete your entire backup file and start with a new one.
I'm afraid that AppleCare will tell you the same thing, but it's worth checking with them to see if there are any new developments in this regard for this puzzling issue which affects a small percentage of users.
Please post back on your findings if you pickup some additional useful information when you speak to Apple.

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how can I stop it? Thanks

Look under system preferences on the mac at what is be controlled? Look at Mail, Contacts, Calendars. How many accounts are managing contacts? Just the cloud? the cloud and gmail? or cloud, gmail, yahoo, and exchange? If you have more than one contact account, then you will have different contact lists, if John Smith shows up in more than one of your contact lists, you will have multiple entries.
Pick a contact list that is your master, (I use iCloud), only turn on contact syncing for it. The same for your phone. Spend some time on the iCloud webset (www.icloud.com) and work on your contact list there. Clean it up, remove duplicates, etc...Changes will auto sync back to all your devices. Life gets much simplier.
Just remember, if you sync different contacts lists and a large number of people appear in your different lists, then they will appear as duplicates.

To much of the same contakts

Similar Messages

Maybe you are looking for