To Nokia staff: E72 and rebooting issue when liste...

I have been an E72 user for 8 months now and I have been pretty satisfied with it's FM receiver so far (no rebooting, I mean) in normal use (i.e, standing, walking or cycling in town). Only, lately I had the occasion to travel by train listening to FM with my phone and Me too experienced several rebooting during the trip. At first I thought it was due to loosing FM station signal down the way, but as it happened even when in reach of strong signal (I mean, the station was strong and not close to fade, nonetheless the phone rebooted)...I guessed it could be connected not to loosing the FM signal as to an issue when, during FM listening, the phone performs cell hand-over or a 3g to 2g or reverse process . Infact, after setting the phone offline, I didn't got any reboot till the end of the journey.
As I read somewhere on this forum that the Nokia tech group has not find anything wrong with the FM yet, this too could e a path to follow to fix the issue that seem to be not easy to "trigger" in laboratory.

I'd like to hear the solution here. My reboot - on an even older E90 - appears to occur only in General mode - Offline it's fine. Replaced my six-year old SIM and that didn't work. But it does have its moments when there is sustained stability. Next week, I'll get a new battery - needed one anyway.
Symbian connected me to the world, to my dreams.. Thank-you Nokia

Similar Messages

Nokia E71 freezes and reboots itself when receivin...

My phone has numerous times frozen when I receive calls. The phone has also been replaced locally but the same problem persists even on the new unit... I assume it is software related.

Battman, you won't get updates in the form of texts or e-mail. You will get "alerts" if there are any updates, if you have subscribed to the My Nokia service.
You can check for updates and install them through FOTA. Type *#0000# on the stand-by, you will be shown the current firmware in your phone: press Options -> Check for updates. If there's an update available through FOTA, you will be prompted to install it. Otherwise, you will have to use Nokia Software Updater that can be downloaded for free from the Nokia website. Another option is to take it to a Nokia Care Point, but they might charge you for the service.
Hope this helps
Cheers,
DeepestBlue
5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

Anyone able to help please?
Thanks.

Freezing and Rebooting issue - Hardware or Softwar...

Sorry if this has been asked before...but...
Is the freezing and rebooting issue caused by a fault in the Hardware or Software...?
Can someone from BT please explain just exactly what is going on.
Thank you,
wdp

sarahoxford wrote:
Just been on live chat as we are fed up of freezing up, random reboots and failed recordings. Usually happens on Gold, Sky Sports - the non freeview channels. Advice from Geetesh was factory reset thus losing existing recordings, stating rather optimistically that this 'will resolve the problem'. When pushed on freezing and failed recordings issue Geetesh said recording of 'internet channels is in a test phase so won't be able to record'?? But we have recorded on gold, fox for example - response is that it won't always work, only for some customers.
The advisor was getting confused. The bit about recording broadband channels still being in test phase only applies to BT Youview boxes. The recording functionality has been available for broadband channels on the BT Vision+ boxes since they launched last January.
To answer the original question. The occasional freezes and reboots are caused by the New Look software (possibly in conjunction with associated system changes on the BT servers). Many of us had years of trouble free viewing using the Classic software on the same black BT Vision+ boxes. It was only when we were upgraded to the New Look software that all the troubles began. If however, you are getting such problems many times per day, or even many times per hour that could indicate a hardware fault.

Small "freeze" and sound issue when taking a full screenshot

Hello,
This is a strange one, and I've not been using Macs properly for very long, so bear with me
It only happens when I use cmdshift3 to take a full screenshot, the other shortcuts for taking them are fine, I do get a similar issue when using Grab and it, too, only occurs on the full screen capture. What happens is, the sound clip of the camera noise will begin to play, stop, it goes a little distorted then the windows on screen will freeze up, the mouse will still move, and it stays like that for around 5 seconds until the file is saved to the desktop and all goes back to normal again. I'd like to reiterate that it only does this when i do a full screenshot, and the smaller one with the crosshairs and the individual windows is perfectly fine.
I tried searching on google, on the main support section and the forums and nothing has come up that's been helpful. I've had a look in the system logs, and at the time's I take the screenshot, the system log reports the following:
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,728)->(3,7bd).
Sep 24 14:04:09 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,728)
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (2,71a)->(3,7ec).
Sep 24 14:04:32 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (3,71a)
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - Error: attempting to clip to a position more than one buffer ahead of last clip position (4,73a)->(5,7c8).
Sep 24 14:04:33 xxxxxxxx-computer kernel[0]: IOAudioStream[0x4db4a00]::clipIfNecessary() - adjusting clipped position to (5,73a)
I know from that it's referring to my soundcard and there's a memory reference, but that's about as much as I can figure out.
It might not seem a big issue as the other methods are ok, but if it turns out to be something much deeper I'd like to try and fix it now before it becomes a problem.
Does anyone have any ideas?
Thanks,
Claire

Bingo! EXACT same problem here! It seems to me its a software bug.. ??

Nokia N9 Blutooth and NFC issues.. keeps loading a...

i have bought Nokia N9 recently and i noticed that the blutooth doesnt connect and keeps loading like forever .... I have tried restarting the device like a hundred times but still no use.
and i have also noticed that the blutooth address is missing and i cant connect to NFC too.. ihave attacted the screen snaps with this post .. Please reply as soon as possible ..
Attachments:
20120622160719.png ‏19 KB
20120622160918.png ‏57 KB
20120622160934.png ‏40 KB

@jobinjacob94
If you use standalone version of Nokia Software Updater upon PC, do you get offered chance to re-install existing firmware?
You have to try "Clear device" and the above as a pre-cursor to returning device to Nokia Care facility:-
Open “Settings”
Tap “Reset”
Choose “Clear Device”
Tap “Yes” to confirm the process.
Warning: all user data would be erased from device!
Happy to have helped forum with a Support Ratio = 42.5

IPhone 5 Battery Indicator and Reboot issues

Hello Apple community forum,
I have an iPhone 5 that I purchased approximately 20 months ago. It has worked flawlessly and been well taken care of. Only until recently, maybe 3 weeks after I updated to IOS update 7.1.1, I have been having a plethora of issues and now the phone is virtual useless. I have not jailbroken it or have had any third party hardware installed. It all started when I plugged in my Apple lightening cable for charging and an error appeared "unsupported charging cable". From there I have experienced the following problems:
Battery indicator stuck while charging at any various percentage or during normal use and standby. Only a reboot will provide current charge status.
Extremely fast battery drain.
Unexpected reboots at various intervals or while accessing Apps or browsers. Sometimes very frequent. One day had at least 60 reboots. one right after the other.
Cannot turn on or off
Shuts off when I put it in my pocket.
BSOD (Blue Screen of Death)
Screen exhibits lines or odd characters shuts down or reboots.
Time and date at different positions post boot.
Log file full of errors. (Panaic.ips bug type 110 | awdd Wireless | ResetCounter bug type 115| TCCService bug type 167 | Log-Aggregated bug type 193)
The update worked great on the phone and it seemed faster and the battery lasted a bit longer than usual.However, now it is a different story. I was able to backup my phone and offload all my photos on its good day. I was reading the support site and following a few of these forums. I follow the soft and hard rest procedures and even restored the phone back to factory default (DFU mode). It does seem to run a bit better in default without many apps on it but it still exhibits all the above issues. I bit the bullet and went to the Apple store to talk to one of there G men. He acted surprised and gave me the Apple trained verbal run around. He ran the diagnostic and stated that my battery did not even register as being in the system. From there he opened the phone, inspected it for damage and re-attached the battery and taped it back down. BTW, they hosed my screen cover. Nothing is ever free. They did offer to replace my battery for $80 but did not feel that would solve this problem. If anyone has had this issue and did have a new battery installed, please let me know how that worked out.
I wonder if this latest update exposes some type of hardware flaw that was previously fixed or just a bug(s) in the software code. Yet, Apple does not seem to acknowledge there is a problem let alone advise to any upcoming fix. It does not seem that Apple really cares about my little bit of business. If anyone has any ideas or experience, please let me know. This is frustrating and owning too much of my time. Thanks Apple!

If tried techniques to get the battery to act right, such as rebooting by holding both the power and home buttons until the apple logo appears and it restarts, and those things haven't helped, take the iPhone and iPad to the Apple store genius bar and have the technicians test them to see if there is a hardware fault. Do that before the warranty runs out so you are covered.

Can't Sync IMAP Sent Mail on E72 and other issues!

Has anybody any idea why Nokia felt it a good idea to release a phone with a mail client, that supports IMAP, but DOESN'T sync your sent mail? It is such a ridiculous omition that I am lost for words. I actually recommended the E71 to our IT department a few years ago but the mail client was so poor, we ended up getting 15 phones and 15 Profimail licences. The IT department have asked me to recommend the next phone as the E71 was a big hit and I asked them to get me this E72 to test. It is with great reluctance that I am going to try the iphone instead and recommend that as I believe the mail client on it is very good and the E72's is totally hopeless unless you go through the Nokia Messaging server, which obviously a corporate isn't going too. Before I knee jerk though, has anyone else had this issue and found a way around it?
Also, the predictive text is shocking now, the web browser is so buggy and closes without warning due to memory issues all the time.
Oh, the optical control pad is dreadful and totally useless and the select key also doesn't work in off-line mode, so the E72 is useless on a plane.
Nice to see that Nokia took the very good E71, played with it, broke it, made it far worse and buggy, stuck a new case on then released it as the E72. I remember the days that a Nokia phone worked from the minute you bought it, but now with firmware updates Nokia feel they can release half baked phones by the dozen, monthly. Pathetic.
Oh, and this is the latest firmware, too!
And one other thing, OVI Suite, PC Suite and the umpteen other applications that all do useful things....can Nokia not just release one main PC support app that works and has ALL the features under one roof? I have to installed them all on my PC as well as loads of other sync and office apps on the phone (like OVI Files) just to do the obvious things that you use a modern smartphone for.
Nokia, there is a very obvious reason why you are losing market share at the moment, and it isn't because people trust Google or like DRM and fruit pictures on their phones. Get a grip will you?
If anyone can help primarily with the Sent Mail sync issue in Nokia Email (without suggesting I route all my mail through Nokia's unreliable servers and divulge all my passwords), I would be very Grateful Indeed.

I had a number of problems setting up Google Apps with my phone. Mail, Calendar and Tasks were not syncing.
Mail
Ok here is the solution to your sent mails problem. I have spent far too long setting up google apps to sync properly with my new E72 (latest software installed). It really is a superb phone but if Nokia is not going to fully support integration with Google Apps with a simple app then Android and Blackberry will simply take over for Apps users. It really isn't up to Google to solve this its up to Nokia. Are you going to move from Google Apps or change your phone????
I have gmail and business google apps accounts and both are now syncing properly with what seems to be pretty good Nokia email software on the phone. This is allowing me to receive, send, view attachments, view sent mail etc. Here are the steps I took from the beginning.
1. Enable IMAP for the google accounts. Couldn't get anything to work otherwise.
2. Follow this instruction https://mail.google.com/support/bin/answer.py?answer=78887
3. Your inbox should now be working however you now need to map the folders you want to see on your mobile. While at your inbox go to >settings>mailbox settings>what to sync>folder subscriptions.
4. Click on Gmail and highlight the folders you want to see
5. Go back to your inbox and go to the dragdown list of folders and highlight 'More Folders'. Under 'Gmail' you will find your sent items along with attachments etc. Problem solved. Its not a pretty solution but at this stage like me you just want something that works.
Calendar
This was a nightmare and I am now running a third party app called Googasync which is working fine. In 10 days time I will need to buy this so if someone knows how to setup calendar syncing properly without it please let me know.
Tasks
Googasync will not sync Tasks and I don't know if there is any app out there that will. If someone can help please let me know. Surely this should be pretty simple!?!?!
By the way I mailed Nokia support last Thursday on the above but have not received a reply.
In summary its a great phone and I've moved from a Blackerry Bold to it but I shouldn't be spending days finding workarounds!!

FSCK and reboot issues with external USB drive

I'm having an issue with an external USB hard drive I'm using. I've always had issues with this drive cause my reboot to "freeze" when it's mounted. Basically the system message with be sent out, but it doesn't actually proceed with the reboot. No switch to init 6 or anything, but the shutdown process is still active. I can continue to use the computer as usual, but I can't cancel the existing shutdown or try to enter init level 6 by hand. So I just got around this by unmounting the drive before I shutdown. However, lately when I try to unmount the drive I get an error saying that the drive is in use and I should check to see what processes are using it by runing lsof or fuser.
Yesterday I tried copying dsome files from the drive but there wasn't and activity on the drive. cp didn't report any errors though, it just sat there and did nothing. I tried running fsck on the drive, but didn't get much farther. I'll see some activity on the drive for about a second, then all activity stops and fsck just sits there. When I try to kill fsck, it won't. Even with a kill -9.
I'm really confused as to what is going on. Has anyone else had this problem? Anyone have any ideas what could be causing all this or what I can do to stop this? Thanks in advance!
David
[email protected]

Press the reset button on the device. It is located between the USB and power ports. Make sure to take-out the external USB drive before you reset the device. Or you can also restore the defaults by accessing the Administration tab > Factory Defaults sub-tab in the router’s web-based setup page. Check out this link for the set up; http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32cffead811249aea7e9fc6730bf59ad_KB25681_EN_v1.xml...

Playback and Rendering issues when GPU acceleration is enabled

I'm using the new MacPro with dual AMD FirePro D300. When I enable GPU Acceleration (Open CL) I can no longer play through an entire sequence. It specifically has issues playing through any layered graphics or titles, but seems to play with those disabled. I have tried having "Composite In Linear Color" enabled and disabled, and neither seemed to make a difference. It's the same deal when rendering. If I have titles, and use GPU Acceleration it jumbles clips, cuts to black or static, all manner of weirdness. Is there something I'm missing?
An example of what playback looks like if I have titles and GPU Acceleration enabled.

This computer thing seems complicated enough that if your system works better with GPU accel off, that's you best performance. I understand they've been trying to sort out these sorts of issues but there's so many dang variables, and trying to build software that interlinks with other complicated software is something no other NLE or Grading program does. That throws even more kinks into the list.

Upgraded to Firefox 8 and rebooted but when trying to start FF get message that reboot is require to complete installation; same message if I try to re-install or uninstall FF. Writing this using Google Chrome.

Upgrade to FF 8 (from 3.6) appeared to go smoothly, as did reboot, on Acer desktop running Windows 7 Home Premium. But I get "reboot required to complete FF installation" every time I try to start FF. Tried to uninstall FF using Control Panel uninstall and also using the uninstall in my Mozilla folder--get same "reboot required" message. Tried to reinstall FF--same message. In short, FF totally inoperable--and I'm starting to like Google Chrome.

Please see:
http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Delete the files in:
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)
(The above is for a windows installation - a Mac installation stores its files in /Applications/Firefox.app <br />
To open one of these folders in OSX, Ctrl-click it and select Show Package Contents. )
Download a fresh copy of Firefox for installation.
Uninstall your current Firefox version before installing but don't remove your profile data when you uninstall Firefox (do not select to remove personal data) or you will lose your bookmarks and other data in the profile folder. Remove the program folder for Firefox as well.
Do a clean reinstall as an administrator. See:
http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
For information on your profile folder, see Managing profiles and:
http://kb.mozillazine.org/Profile_folder_-_Firefox
http://kb.mozillazine.org/Profile_backup
Please let us know how you fare.
edited to specify path difference on Windows

Jumbled text and spacing issues when creating a pdf

When I create pdfs from FrameMaker 9 or Word 2007 files, Acrobat 9 Pro often transposes characters or modifies the spacing between characters. Can anyone help?

I modified the settings according to the help page. I then built 5 pdfs and did not see evidence of the letter jumbling or spacing issues. Since this issue is intermittent, I cannot confirm that the problem is solved, but I am hopeful!

Nokia 206 UPDATE AND CONNECTION ISSUE.. CERTIFIC...

This is my first asha and it is giving me problems. cant connect to the nokia account or the update site. says "CERTIFICATE NOT VALID ACCORDING TO PHONES DATE" WHAT IS THIS......??VERY FURSTRATING... IF SOME BODY CAN GUIDE ME TO A SOLUTION, MUCH APPRECIATED..... THANKS A TON...

Hi,
Welcome to the forum!
If the error Certificate not valid appeared, you need to check these two information:
1. Check that the current date, time and time zone in your Nokia 206 are correct.
2. Check that your device has also a latest software installed. Make sure you have an active and stable internet connection when you do this. To verify if there's an available phone's update, go to Settings, select Phone and then Device updates. You may then select Download phone software.
If you're done with that, try to connect to your Nokia account and see if it's still the same.

How many Casio Commando owners have had freezing and rebooting issues?

I've had nothing but issues,including the above mentioned rebooting and freezing problems. If you have Please leave some kind of remark,I'm tired of paying for a phone that always has issues even after getting it replaced only to find the same issues and it seems to get worse with time. I'm going to take this to a Verizon store so I can look the person in the eye and show them all the threads(including this one) on here with the same issue and have them tell me no other customers are having these problems. I've read at least 10 threads with the same problem.

I've had the Casio G'Zone Commando for a few months - a constant battle. At first we thought there was an issue with the battery as it would keep discharging. Got a new battery. Then it started freezing. Sometimes off/on would re-start, other times had to pull the battery. Then the microphone went bad - VZW convinced it was me so sold me LG Bluetooth. Then speakers went out. Finally, issued replacement G'Zone about 12 days ago.
So we take all the time to re-install apps (mostly travel apps like airlines, etc - nothing strange). Freezing again, but restarts with off/on or battery pull. Yesterday in VZW store to get another smart phone (add'l) and transfer the Casio to husband. IT FROZE! And no one in store could get it re-started. So yet another new Casio coming.
We're pretty done with this phone - the Android version is old. It is kinda slow. I wanted it for the ruggedness, but not if it is unreliable (since I travel a lot). I don't know why a) VZW won't ship new phones more quickly (without US paying the cost) and b) won't let us get a different smart phone. VZW is really our only choice for carrier, and we've been with them since the cell phone era started. It seems like we just don't get near the service we used to.

Task Sequence Windows Server 2012 format and partition issue when using MDT2012

Hi all,
Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
attached.
We've configured multiple format and partition disk steps to create the following partition layout:
Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
Disk 1: 40GB Programs
Disk 2: 40GB Data
Disk 3: 25GB User
When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
letter D.
The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
<![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="osdsetuphook.cpp:186">
<![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
<![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="basesetuphook.cpp:366">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
file="environmentscope.cpp:659">
<![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
<![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
<![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
<![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
<![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
type="1" thread="776" file="commandline.cpp:827">
<![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
<![LOG[Diskpart.exe STDOUT:
Microsoft DiskPart version 6.1.7601
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: SRV03
Volume 1 is the selected volume.
DiskPart successfully removed the drive letter or mount point.
The volume you selected is not valid or does not exist.
There is no volume selected.
]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
This is the output in the diskpart_script.log file:
select volume D
remove letter=D
select volume D
remove letter=D
select volume E
remove letter=E
select volume F
remove letter=F
select volume H
remove letter=H
select disk 0
select partition 1
assign
select disk 1
select partition 1
assign
select disk 2
select partition 1
assign
select disk 3
select partition 1
assign
It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
all looks ok showing no errors in the smsts.log file.
I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk.
Anyone seen this behavior?

I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

To Nokia staff: E72 and rebooting issue when liste...

Similar Messages

Maybe you are looking for