TO Not Created For DN (Delivery Note) Issue

Hi
For a DN (Delivery Note) TO (Transfer Order) is not created.
Wat could be the problem.. wat need to be checked..
Wats the process flow here..
Vijay

Hi Vijay ,
At first find the movement type that was hit in the delivery.Youc an check the same in LIPS table after entering the delivery number.
Find the corresponding WM movement type under the below path .
SproLogistics ExecutionWarehouse ManagementInterfacesInventory Management--Define Movement Types
1 --Assign WM Movement Type References to IM Movement Types
2 --LE-WM Interface to Inventory Management
Later goto the below path and check the settings for WM Movt Type.
SproLogistics ExecutionWarehouse ManagementActivitiesTransfers--Define Movement Types
Check whether automatic TO is set.
Regards
Ramesh Ch

Similar Messages

Output type not created for outbound delivery while using SHMNT05 idoc type

Hi Experts,
Please help me to solve the below issue.
Problem:- I want to to generate an IDOC(using type SHPMNT06) once the PGI is done for an outbound delivery.
Already it is working fine when used DESADV.DESADV01 or DESADV.DELVRY07. But now the output type is not getting created when used SHMNT.SHPMNT06. I have created a separate output type ZPJ7 just as a mirror copy of the earlier output type(ZPJ6) used for DESADV.DELVRY07.
Question:- Is it possible to use idoc SHPMNT06 instead for DESADV01 or DELVRY07? If yes then what are steps to be followed?
The reason why SHPMNT06 idoc is planned:- We have a scenario to send outbound delivery to 3rd party system via XI. If the outbound delivery is for National(Not for Export) and PGI is completed then send the idoc straight forward to XI otherwise DO NOT generate the idoc, but just create the delivery. Collect all the deliveries in a transport and send it in a shipment. The shipment details can be sent using SHPMNT idoc. Now from XI perspective, if we can utlitze the same SHPMNT idoc for the National delivery(1st case) then perhaps this will require less effort. Hence shipment idoc is required to be generated when the delivery is created and PGI is done.
Also it would be great if you can advice some better way to solve above mentioned scenario.
Many Thanks,
Sanjay

There could be several reasons. Go to the document and in the extras-output check output determination analysis in the processing log.
If the output has been created successfully then you need to see your printer determination. Ask basis to check it up. If the problem is that even the print preview is not coming. Check your communication in the output analysis and ensure LOCL is selected. Any other printer will need to be configured.
If thats done already then check whether you have maintianed the condition record.
If that too is done then check whether your output type has been assigned to the output procedure and that the output type is listed in the procedure.
regds
Jude

Depot Sales - Goods issue not done for the delivery

Hello Experts,
I am trying to capture a Excise Invoice in the Depot Sales Process TCode - J1IJ.
I am getting the follwoing message - GI not done for the Delivery.
Process which we are following here is
Depot
SO - Delivery - Picking - Packing - J1IJ - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end (Will create invoice & Excise Invoice).
Excise invoice is captured during MIGO at Depot.
Can you please suggest..
Thanks & regards
Mahesh

Hi mahesh
Change the process to following manner
Depot
SO - Delivery - Picking - Packing - Shipment creation - Shipment Planning - Loading Start - Shipment Start (Will do PGI) - Shipment end -J1IJ(Will create invoice & Excise Invoice).
u r problem will be solved.
Regards
kedasu.a

Delivery qty not correct for partial delivery

Hi, I met some issues need your help!
1) Create a sales order base on the sales bom.
2) Current stock and supply is not available for the required delivery date.
3) According to the current stock or supply qty.only confirm partial qty for the components.
    eg.
    the structure of this sales bom as below:
    Material: A 1PC --> B 1PC
    Material: A 1PC --> C 1PC
    After ATP check ,the result as below.
    item 10   mateiral A (Header)          100PC   ( not relevent for inventory)
    item 20   mateiral B(component)     100PC   confirmed 30PC
    item 30   material C(component)     100PC. confirmed 10PC
4) Create delivery(partial delivery) with the selection date.
5) We can find the component quantity is correct but the header quantity is incorrect.

Hi
Configure the field 'Create Delivery Group' in the item category of BOM (VOV7) in the Bill of Material/Configuration area. Please go thro the F1 help details of that field..
Form delivery group and correlate BOM components
Here you can determine whether sub-items that belong to a main item, and which resulted from a BOM explosion, are to be combined in a delivery group.
Use
You use a delivery group to determine a common delivery date for all the items that it contains. If you double the quantity ordered for the main item, then the order quantity for the sub-item will also be doubled.
Indicator X means that a delivery date is created for the delivery group. The system uses the last date (chronologically) of an item in this group to create the schedule line date.
Indicator A means that the system generates correlated schedule lines. If no complete delivery is required, as soon as all the items in a bill of material are available, the system creates a correlated schedule line. On the first date, when all items in a bill of material are available, a confirmed quantity is issued.
Thanks,
Ravi

E : could not create header data delivery in EWM system

Hi Experts.
Inbound delivery (vl60) from ERP (itu2019s stuck in outbound queue: smq1) to EWM. Application log EWM system below.
ERP/EWM Interface Appl log
E: could not create header data delivery < dly number >, system < BS System > (Msg id: /SCWM/ERPINTEGRATOIN012)
S: supply chain unit < SU NO > found for erp warehouse number < WM NO>
S: EWM Document type INB for ERP delivery type EL found.
W: No date/time type found for ERP date/time IDDOCUMENT.. (Msg id: /SCWM/ERPINTEGRATOIN054)
W: No date/time type found for ERP date/time IDINTRANS.
W:No date/time type found for ERP date/time IDVERSION.
S: Date/time type TDELIVERY found for ERP date/time WSHDRLFDAT
S: Business partner <BP NO > for ERP Partner <P NO> found.
S: NO document found
E: application error
E:an error occurred during validation of object.
POST-Processing Framework Appl log
Processing /SCDLT/TS_TRANSFER is started
messages for doc:IDR < dly no >
Started Transition successfull
preparation for database access successfull
start access to document flow successfull
step determination successfull
step proecssing successfull
start checking whether action 022 successfull
start data transfer successfull
start checking whether action 020 in ERROR
         Action not executable
        config. error method CHECK of validation PDI_HDR_ERP_PARTNER Not implemented
        config. error method EXECUTE of validation PDI_HDR_ERP_PARTNER Not implemented
         error in step processing
        action 020 not allowed
        transition failed
       Action not be successfully executed
could any one guide me to solve the issue.
Kind regards
Edited by: Rahman Abdul on Jun 20, 2011 9:33 PM
Edited by: Rahman Abdul on Jun 20, 2011 9:33 PM
Edited by: Rahman Abdul on Jun 20, 2011 9:34 PM

Hello,
In SPRO, you need to maintain the entries for:
No date/time type found for ERP date/time IDDOCUMENT.. (Msg id: /SCWM/ERPINTEGRATOIN054)
W: No date/time type found for ERP date/time IDINTRANS.
W:No date/time type found for ERP date/time IDVERSION.
This can be found in EWM > EWM > Interfaces > ERP Integration > Delivery Processing > Map Date Types from ERP System to EWM.
Cheers,
Paulo

Accounting entry against Excise invoice not created for Service Tax sales

Dear all,
I am facing one problem related to accounting entry against excise invoice not created, for service tax sales scenario in SEZ plant.
Accounting entry against billing document is generated,which contains revenue account-Debit entry,service tax 10% --Debit entry,ECS-Service tax 2% --Debit entry, SECess Service Tax 1% --Debit entry & Sundry Debtors (Reco) - Domestic(Customer receivable reconciallation) account-Credit entry.
But after generating excise invoice, accouning entries not generated for clearing of Cenvat suspense entry(i.e.service tax 10% ,ECS-Service tax 2% , SECess Service Tax 1%) which is generated during billing document.
Plz. suggest step by step guideline to resolve this issue.
Thanks & Regards,
Mukesh Pardeshi

Hi ReazuddinMD,
thanks for your reply and support...I checked all the entries/accounts maintained correct.. but the Accounting entrys against Excise invoice not created..
Now i am geeting error as below at the time of saving Excise invoice,
No account is specified in item 0000000001
Message no. F5670
Diagnosis
No account was specified for account type "S" in item "0000000001" of the FI/CO document.
System Response
The Financial Accounting program cannot process the document.
Procedure
A system error has probably occurred in the application you called up. Check the data transferred to item "0000000001" of the FI/CO document.

Interval 01 was not created for number range object HRTEM_REFN

Dear expert!
Now, I'm getting some issues in Training and event management module.
- The first, I created business event
- Second, I process to book for business event by tcode: PSV1 --> book --> book/payment info --> activity allocation.
But when I was booking, the system displayed error: "Interval 01 was not created for number range object HRTEM_REFN"
Help me, please!
Best regards, Huy!

Go to the customization as below
Training and event mgt>Basic settings>Number range maintanence>Define number ranges for External operation
and maintain number ranges as 01 Internal
Hope ur problem will solve
with regards
partha

IDOCs not created for Payment method "P" and "B"

Dear Experts,
I have executed the Automatic Payment program for three payment methods (P,V and B - Foreign Currency) in one Run ID. Payment run was successful but it has created IDOCs for the documents / Vendors attached with payment method "V" but IDOCs were not created for the payment methods "P" and "B". I have checked the configuration relating to payment methods and those were assigned with Form details and the maximum amount is also defined in the payment methods.
Can any one suggest me where I had made the mistake / where I need to check the configuration settings.
Thanks a lot.
Regards,
Ramnath.

Hi Surya,
Please find below error log created while executing the Payment run for the issue.
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000116195, user ID V-PIZHA)
Step 003 started (program RFFOEDI1, variant &0000003957078, user ID V-PIZHA)
Maintain an output device in your user master record
Job cancelled
Thanks and Regards,
Ramnath,
SAP FIMM Team

Project with profit center was not created for entire period

Hi everybody,
I need a help with a problem here.
The alert mesage "project with profit center was not created for entire period" was displayed.
Then I searched for the creation dates and the profit center was created before the project gets its firsts postings. Therefore, some line itens don't exist in profit center (ledgers).
My two questions:
The first one, is it possible to input line itens in a retroactive way?
Everytime I need to use the project master data this alert is displayed. How can I fix avoid this message?
Thanks,

Hi,
Regarding your issue, it is theoretically possible to reverse all settlements up to the start of the project and then to settle again it
is a must to check in standard if the profit center is valid from the project start date onwards.
Check the attached note 1048945.
The system generates error message KM700 ('Profit center <PRCTR> does not exist for <date>') when you enter a profit center on a project definition if the profit center is not valid in the entire period between the basic start and the basic finish date of the project definition . However, only one warning message should only be generated in this case.
regards
Waman

Payable Invoice has not created for internal requisition. ( R12.1.3)

HI,
This is an issue where i am facing for which the invoice has not created for the internal requisition, whereas the Receivables Transaction has created automatically for the same internal SO.
Is there any way to find out the invoice, because i have again ran the Report "Create Inetrcompany AP invoice" and when i mchecked in the log it says 0 fetched invoice....
Kindly help me out to solve this issue,
Thanks in advance.
Vijay

Hi Vijay,
Did you check in AP_INVOICES_INTERFACE table if there are some records with INVOICE_NUM like '%AR invoice number%'?
If no records in the interface table - can you please, check by submitting the program without giving any input parameters?
Regards,
G V Ranjith

FCN Document not created for SO : Message SY499-Urgent

While Saving delivery or doing PGI or while processing billing document i am getting below info message.
"FCN Document not created for SO " Message SY499.
I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
Regards,
Vijay

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

Could not create header data delivery 0180000229, system ERP_800

Hi EWM Gurus,
Kinldy help us in resolving the below issue .
When we save the inbound delivery in ERP system , we get the below error in SCM(EWM) system.
System is not creating the inbound delviery notification in SCM due to this error.
ERRORS
1.Could not create header data delivery 0180000229, system ERP_800
2.Application error: Exception in method EXECUTE of Determ. IDR_HDR_044
3.Application error
4.An error occurred during validation of the object
Thanks in advance
Jayamohan

Hi,
I am receiving the same message. Can you please let me know the solution if you have resolved this one.
Thanks in advance...
Sam

8dot3 filenames not created for Program Files and Program Files (x86)

Interesting issue we are realizing on Servers deployed from SCCM 2012. 8dot3names are not created for Program Files and Program Files (x86). they are created for other files/folders at the root of C and below Program Files and Program Files (x86). This is
causing issues when programs are installed and the path is then created with 8dot3 filenames for program files and program files (x86)

Arg. we just got bitten by this "feature", and it's affecting our security software stack (name starts with M and ends with ee), and some ancient crud too.
And found this, which suggests a logical reason for 8dot3name to not be present on servers, but, on clients, I think it's a rather gross assumption...
http://blogs.technet.com/b/josebda/archive/2012/11/13/windows-server-2012-file-server-tip-disable-8-3-naming-and-strip-those-short-names-too.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

PO on vendor not created for a company code

Hi,
When the vendor master is not created for a pur.org., I am getting errror message when I try to create a PO on that vendor/pur.org. combination. But, when the vendor master is not created for a company code, system is allowing me without any error for creating PO on that company code.
I want to set error message for creating PO on a company code for which vendor master is not maintainted. Please let me know the settings required for this.
Thanks.

Hi
Normally it will allow to create PO.
If u r not maintaining the company code settings u can not proceed with the MIRO.
U might have created PO through MK01.... But FI team has to enter the Compnay code related details in XK01
Regards,
Raman
Edited by: Raman S on Mar 13, 2009 11:58 AM

Business partner Customer is not created for Sales B Role in R/3

Hi,
I am trying to create Customer for a business partner associated with itin Tcdoe BP. I m giving the account management and Payment terms Tab details and clicking on SAVE button. The screen values are not retained and the Customer,Comapny code combination is also not created.
thanks,
Deepthi.

OSS Note 1254214 is applied and it is solved.

TO Not Created For DN (Delivery Note) Issue

Similar Messages

Maybe you are looking for