To open a project already under version in RoboHelp for the first time

Hello Everyone,
In RH html help it is mentioned that first time when you open
your project in the new version (I have RH v6) which was created in
the old version of RH (in my case it was created in RH x3) the
project is converted to the new project file type (.xpj) and the
old project file (.mpj) is deleted.
So far, I have done the first step and project is converted
to the new project file type (.xpj) but the old file type (.mpj) is
still there – is it might be because it was read only.
My greater concern is the next step which is mentioned in the
Help, my supervisor doesn’t agree with that which is
‘Add the project back to version control in a different
folder than the original .mpj project file. Somehow, he
doesn’t agree with that and I am really not sure if there is
going to be any impact for not doing that because currently in
Windows explorer I can see both the project file types – one
with the .mpj and the other one with the .xpj. And also, I am not
sure if the huge difference in size of both the file types is a
concern (old mpj file size is coming 544 KB & the new xpj file
size is coming only 3KB). Please, give me your feedback.
Your help is greatly appreciated,
Thanks

Hi all
Trying to clarify here. Colum is mostly right.
When an older project is opened in X5 or 6, the .MPJ file
isn't really "Converted". What happens is that an XML file bearing
the same name as the project but having the extension .XPJ is
created along with a slew of other files. The former .MPJ file is
then updated and renamed by changing its file extension. The .MPJ
extension is renamed to .CPD. I could be wrong in my assumption of
course, but I've always thought .CPD meant "Cache Project
Database".
Cheers and happy Thursday all! Rick

Similar Messages

Itunes is on my desk top on windows 7 and I can not open it I have just loaded it up for the first time

Itunes is on my desk top on windows 7 and I can not open it, I have just downloaded it again and hit repair to see if this helps as well but it still won't open

Okay, launch iTunes... does it work?
If so, in Edit > Preferences > Advanced is the option to "prevent syncing of iDevices" selected?
Another possibility, in Control Panel > Default Programs > Change Auto Play Settings > what is the system set to do when an iPhone is connected?

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

TS1717 I recentlu upgraded to the latest itunes version, I have now tried to open itunes for the first time since upgrading, no I find I have not got permission to open itunes. It will not launch at all???? Any ideas???

I have recently upgraded to the latest version of itunes. I have just tried to access itunes for the first time since upgrading and now I get a message saying I do not have the appropriate permissions to access it. It will not launch at all. I have also recently changed my ISP, help anyone?

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

Starting Permier Pro for the first time - how do I create a new project?

Starting this software for the first time.
New Project window is asking to load a preset. There are no presets.
This is not good software - I can't get past the first window!
What do I do, please?
TIA

Welcome to CS3.
Before you post any further questions, please take a look at the video tutorials in Adobe's video workshop. I'm not trying to be rude, just trying to save you from having to ask many basic questions that can be answered by watching the video tutorials.
http://www.adobe.com/designcenter/video_workshop/
It is a great resource and can get you up and running. Just select Premiere Pro CS3 from the products window, then select the topic "Getting Started" and finally the title. Start by selecting "setting up a project" under the titles window.
Its like having your own in-house instructor.
However, as Jeff said, the trial version will not have certain features enabled.
Good luck.

Updated to iOS 7, when my phone came on for the first time I could see I had 2 new viber messages. When I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone.

Hi,
I have only just upgraded to iOS 7 on my iPhone 4 and am having a problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
So to questions:
1) Why is my activation not working under my referenced australian number?
2) Can I recover all my message history which should be saved in my itunes backup? I am willing to revert to this backup state again if needed.
Please help.
Thanks.

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

I recently built a new windows PC for the first time. My (new) wife and I both have itunes accounts, which we would like to use under different windows accounts on same PC. However, when I try to download my wife's songs it gives me an error.

I am recently married to a wonderful woman and just built a windows PC for the first time. The idea was that we would (sorta) both be able to get a new computer out of it as we would each have a different account under windows. One of the first tasks was to migrate over our iTunes libraries. I did mine with no problem, but now that I'm try to do hers, I'm getting an error message saying "if you download past purchases with your Apple ID, you cannot auto-download or download purchases with a different Apple ID for 90 days."
What's the best solution for this? I want my wife to be able to use the new computer under her windows account just like it's her new computer, to the extent possible. I don't want our two iTunes accounts to be fighting each other and causing problems because they are on the same physical machine. What to do? Surely this can't be the first time this has happened - where two people each want to have their own iTunes account on the same computer.
This is the latest version of iTunes (12.0.1.26) running on Windows 8.1.

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How to I get my ipod connected to wifi for the first time..it's an ipod tough 2010 version, refurbished

how to I get my ipod connected to wifi for the first time..it's an ipod tougch 2010 version, refurbished

Hi,
To connect your iPod to wifi just:
     1. Open settings,
     2. Tap Wi-Fi,
     3. Make sure the Wi-Fi switch is on,
     4. Tap the network you would like to connect to,
     5. If the network has a password then type it in and press join.
For hidden networks(networks that don't broadcast their SSID(name))
     1. Follow 1-3 above,
     2. Tap other,
     3. Type in SSID(name) of the network,
     4. Select the security of the network,
     5. If there is a password type it in,
     6. Press Join.
Some public networks may now show a login screen where you may have to agree to terms and conditions, enter your email etc...

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

Trying to open Premiere elements 12 for the first time even though I had it loaded for a while. It gives me a message that I need to be connected to the internet (which I am) or that my clock is off (it is correct). Any suggestions?

First we need to check , whether the LAN settings is set to detect settings Automatically or not.
Follow below steps .
1)Open Control Panel and then click on the option "Network and Internet" .
2)Click on Internet options, click on 'Connections' tab.
3)In the 'Connections' tab, select 'LAN' settings, you will be able to view the Local area network settings box.
4)Check the box-"Automatically Detect Settings" and then "uncheck" all the other check boxes like 'Use automatic configuration script', 'Use a proxy server' , Bypass proxy server' ,then click on ok button .
5)Click on "LAN settings" button again , make sure "Automatically Detect Settings" is the only option selected, keep the LAN properties window open.
Then launch Premiere Elements 12 and try to sign in.
If the settings were already set like that or you face same issue after signing in , let me know

I am trying to launch Aperture for the first time and it won't open. Any tips?

I am trying to launch Aperture on a MacBook Pro for the first time. It displays "Opening Aperture Library" with a moving wheel... but nothing happens. Any thoughts on how to trouble shoot?
Thanks.

on a MacBook Pro for the first time.
What do you mean? Have transferred your Aperture Library from a different machine to a MacBook Pro, or did you just upgrade from a previous version of Aperture?
If it is hanging on opening your Aperture library, your Aperture library may need repairing.
Make a backup of your Aperture library.
Double click the Aperture Library while holding down the option-command key combination ⌥⌘.
From the First Aid panel that appears, select "Rebuild database" (if you upgraded Aperture), else start with "Repair Permissions" and "Repair Database". See this section in the Aperture manual for how to run the First Aid Tools:
Repairing and Rebuilding Your Aperture Library
If none of this helps, post back please and tell us more about your Aperture library, where it is located, the type of images: raw or jpeg, if it referenced, the exact version of Aperture 3 you have.
Regards
Léonie

"you are opening application "xyz" for the first time are you sure you want

When working in Tiger or Panther if I click on a document eg: word, illustrator, photoshop, indesign. and the application that is supposed to open this document is not open already. You get a warning message. that says "you are opening application "xyz" for the first time are you sure you want to open it. " Even though this is not the first time the application has been launched. However if you launch the application from the applications folder or from the dock the warning does not appear.
How do you disable this warning or at least correctly inform the OS that the application has been opened before.application
This happens from clean installs and those that have their launch services database cleared the link from document to application survives a logout but not a restart. I know it is a security feature and not a bug but it would be nice to know where this cache/.plist is and why it is suffering from amnesia.
Textedit does not exhibit this behavior across installs but any other app does I get the warning whether it is a user with a l

Michael,
This could be related to the Side effects of System cache cleaning.
;~)

Trying to use laf project for the first time

hi all , i need help , please
i am trying to use laf project for the first time as i said , and i want help on
the installation process
step by step please , i am soo junior here
i've just downloaded the zip file as the site said (http://fdtool.free.fr/LAF/doc/implementation.htm)
please go to this url and declare the steps to me
thanks in advance

The Forms Look and Feel Project is not an Oracle product. This product was developed by Francois Degrelle. Francois has posted numerous times in this forum that if you need help with the LAF you have to go to the Oracle Forms Look & Feel Project web site or his PJCs and Java Beans Forum for support.
Craig...

To open a project already under version in RoboHelp for the first time

Similar Messages

Maybe you are looking for