To open inspection lot after UD.

Dear All,
Our scenerion is, we are maintaining some data in short text field in the inspection lot when it created. I am using that data for prining on some of my documents which print from the SAP. That field is editable even system status is INSP. But as soon as I posted UD, that field become grey out.
If any case I need to change the data for my business requirement, I cannot change that.  Is there any exit to edit the data from the short text field even after system status "UD".
Regards
Amit Patil

No.  Once a UD is performed, the data is considered as complete and it can't be changed. 
You might want to consider using the UD text instead if possible.  I beleive that remains editable via QA12 (change UD), even after the UD is made.
FF

Similar Messages

  • Block goods receipt if open inspection lot for source inspection (SAP QM)

    hello!
    i would like to block the goods receipt for a purchase order item, if there is an open inspection lot for source inspection. i know how to block, if it rejected, but not what to do in this case.
    thanks!
    matthias

    Hi matthias,
    can you tell me how to block GR if inspection is rejected in source inspection??? as you said u know. please let me know.
    Thanks!!
    vinay

  • UD on Inspection lot after 322 mvmnt type

    Dear All,
    I can reverse the GR Mat doc and cancel the batch after applying Note 175842.
    But I have another scenario which imay be related to this note:-
    1.I have maintained inspection type 08(stock transfer) for re-Inspection.
    Which means when I do 322 via MB1B Means 8********* (Inspection Lot series)inspection lot will be created.
    2.*When I am trying to do posting on 8**********series inspection lot.I am getting an error message*
    *Deficit of BA Unrestricted-use 999.000 M : 7ENL4-21B-9847 1101 PPRD 0000123758*
    *Message no. M7021*
    *Diagnosis*
    *Shortfall below the specified stock level or quantity amounting to 999.000 M.*
    ***I have maintained table TQ07M as per SAP Note with below values:-
    VMENGE01 08 322 321
    VMENGE02 08 322 321
    VMENGE03 08 322 321
    VMENGE04 08 322 321
    VMENGE05 08 322 321
    VMENGE06 08 322 321
    VMENGE07 08 322 321
    VMENGE08 08 322 321
    VMENGE09 08 322 321
    Kindly help.Do I need to maintain some other values also???
    Thanks in advance for your help.

    NawalSaxena wrote:
    > 2.*When I am trying to do posting on 8**********series inspection lot.I am getting an error message*
    >
    > *Deficit of BA Unrestricted-use 999.000 M : 7ENL4-21B-9847 1101 PPRD 0000123758*
    > *Message no. M7021*
    >
    > *Diagnosis*
    > *Shortfall below the specified stock level or quantity amounting to 999.000 M.*
    >  .
    The error you are getting because the stock qty 999.000 is not available in QI stock. Can you check the stock status in overview transaction. Is it still available in QI?
    I would prefer to check document history for same stock as well. Go to MB51 to check document history of same material...you will find some clue on this.
    Thanks.

  • Source inspection lot after PO release

    This is regarding source inspection, i think in standard sap, source inspection lot can be trigger as soon as P.O. is created.
    But in our scenario, every P.O. will be released by Purchase manager and sometimes he may not release.
    My requirement is like inspection lot should trigger only when P.O. is releases.
    Is this possible please advice.

    The creation of the source inspection lots are based on the expected delivery date.  They are not created when the PO is created or released.
    See this SAP help for manually creating the source inspection.  This same program is usually set up in most clients to run as a batch job on a regular basis.  The parameters given the program determine how far in advance the source inspection lots are created.  (QI07, QA51,QA52) QM>Quality Inspection>Worklist>Inspection Lot Creation>Source inspection
    http://help.sap.com/saphelp_46c/helpdata/en/0f/adfab1354d11d4b2ea0050da4ceab0/content.htm
    You may need to create several variants for the batch job and run multiple steps to the job.  This allows you to set up certain materials and/or vendors with different opening periods and delivery dates dependent on the specific material.
    It sounds like whom ever set your batch job up for this set the job up with very wide open parameters so virtually every PO created gets the source inspection lot created almost right away.  You might improve your problem by just adjusting the parameters used in the batch job.
    It would also probably not be hard to copy this program and have a programmer modifiy it so that only PO's with a release status are considered.
    Of course it would probably be better to train the purchasing agents/manager to actually delete the PO's in a timely fashion when they don't intend to use them.  It would keep the system cleaner and help out MRP.
    FF

  • New inspection lot after SPCO status

    We are creating an inspection with "early lot creation" option. Later we post partially stock (1000 KG) to process order. That stock is posted against Inspection lot-1 for batch-1. So businedd do inspection and post stock from QI to UNR. So system update status SPCO(Stock posting completed) but we haven't made UD and still production is under progress.
    Next day business post again 1000 KG to same process order and same batch number, but system creates new inspection lot for same batch-1. Can we stop system to creating new inspection lot for same batch and process order combination? Per our requirements system should updated new stock to excisting insp lot instead of creating new one.
    I have tried all different options of "Control InspLot" but in all cases system does create new lot once SPCO status has been set.

    Dear Eric
    Give the UD when you release the first set of quantity. Then system wont create inspection lot again if you do the GR.
    Regards
    Gajesh

  • Inspection Lot Creation after GR

    Dear PP/QM Masters,
    I have question regarding inspection lot creation after goods receipt.
    There will be GR once at the end of the shift with batch number. As batch generated during shift will be different, there will be multiple GR entry. But for every material only one result recording per shift is required and not for all batches generated. So, how to avoid creation of so many inspection lot? Automatic Inspection lot creation is required hence no question of manual creation of inspection lot.
    I checked function module ‘QAPP_CUST_IP_CREATE’ for inspection point functionality but its description “You can use the available function module to generate inspection points for the inspection during production already when the inspection lot is created.” Can I use function module ‘QAPP_CUST_IP_CREATE’ for restricting creation of inspection lot after GR?
    Request all Masters to help me in solving this.
    Thanks and regards,
    Devang

    Dear All,
    First of all thanks a lot for your response.
    I checked ‘Control Inspection Lot’ setting but even that can not solve my problem as in our case though GR with confirmation will be once in a shift (though in system shift is not defined) but batches will be different and hence material document will be separate. And requirement is to have single inspection lot per shift even if batches and material documents are separate.
    One option is to have multiple line items for GR in MB31 or MIGO or in COR6N. But all this transaction allows only one line item for GR against process order. So, can you suggest any function module or option to have multiple line items for GR.
    Thanks and regards,
    Devang

  • Inspection lot generation after every 5th goods receipt

    Dear Gurus,
    There is a scenario in my project. There are some materials for which the inspection is done on every 5th goods receipt. The inspection of the material will be done for the first time it is coming in the company's premise and for the next four time it will be forwarded directly to the production without any quality inspection. Is it possible in sap to create inspection lot after every 5th inward delivery? Or can anyone suggest me a way to capture this scenario in sap..
    Regards,
    Abhishek

    Hi
    This is possible by using DMR in Task list.
    Go to tcode QDR1-->Create a DMR with
    follwoing steps;
    Dyanmic modification : on Lot level
    F5
    Stage 10 Inspection seviarity :4 Skip :balnk ist: tick  Text:first stage
    OK
    No of Inspectin:1
    Max. skip duration:Blank
    New insp. stage:20
    NOT OK
    Rejections           1
    New insp. stage:10
    Stage 20 Inspection seviarity :blank  Skip :tick  ist:blank  Text:second  stage
    No of Inspectin:5
    Max. skip duration:Blank
    New insp. stage:10
    NOT OK
    Rejections           1
    New insp. stage:10
    SAVE
    Now use this DMR in task list header at Lot level.
    Attach this task list to inspection lot
    make sure that you have ticeked on Skip & Auto UD in QM view.
    Then in QA16 schecule for Auto UD after every 10 mins or 30 mins.
    at plant level also make auto UD & skip 30 mins.
    This will skip the 4 lots & UD will be taken in background.
    After that it will come to QI
    Revert back for More querries.
    Regards
    Sujit

  • Assignment of task list after the inspection lot status is released

    Hi,
    I have applied a user status with  which i am able to release the inspection lot.After that i am going to assign a task list. But it is not getting assigned.
    please help me.
    Regards
    Vivek Deshpande

    Hi,
    Key date is same. I have checked for it.
    What i am saying is , i have manually updated inspection lot status to release state by applying user status. And after that i am trying to assign inspection task list to the inspection lot.But i am unable to do so.
    Can i do this ? Please help
    Vivek Deshpande

  • No inspection lot can be opened for this material and vendor

    dear sir
    i m facing this error while  doing gr. also how to confirm certificate
    plz guide me
    No inspection lot can be opened for this material and vendor

    Sujit/Raj
    I got th similar error. I closed the issue as Raj said because there was an open inspection lot. Im still nto able to figure out the background or root cause for thi.
    The QIno record doe not have release Qty active and release date is 12/31/9999. Then why we have to close the previous inspection lot before recieving another. It seems like there is a condition or something that tells Inspection are to be done in stages and hence previous or pending inspection lot needs to be closed. But where i this condition coming from, where should i check.
    I created PO and performed GR. I noticed if i perform GR and if the Inpection lot has status REL SPCO SPRQ IRCH then this happens. If the status is just REL SPCO SPRQ  then I'm able to do multiple reciepts and this error does not show up.
    Any idea or suggestions?

  • Error in quant generation after creation of inspection lot

    Hi All,
    Our client is using the standard customer return process which is integrated with the QM.
    Problem : If the return sales order/delivery contains two similar line items with same material/batch then system creating different  inspection lots after post goods receipt (Mov type 651) but only one quant is getting generated for total quantity with only one inspection lotn umber. Quant is not generating for remaining inspection lots. Please suggest the solution or SAP note?
    Thanks in advance.

    Hi
      If you are using TAXINN procedure, check apart from VK11 check you have maintained TAX CODE for excise condition types. Example FTXP or VK19 (using application as TX). Also check whether you are using UTXJ condition type. If you are using UTXJ condition type then please remove it.
       For TAXINN you need not have UTXJ condition type.
    Regards
    MBS

  • Sample results to one inspection lot

    Hi,
    Please confirm if the following is possible:
    Record result for samples say 5 samples by today and then assign those sample result to one inspection lots after one week.
    It yes then how ?
    Regards

    Hi Sun
    First we need inspection lots to enter the results. If you mean five inspection lots results want to enter in one inspection lot. As per my knowledge it is not possible for transferring multiple result values to one inspection lot.
    If you want to transfer one inspection lot to another please go through below link.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60221c69-0f8b-2b10-eebf-bec51a601dd6?QuickLink=index&…
    Regards
    Kesava

  • Inspection lot status CRTD CHCR SPRQ

    Dear Expert
    I created inspection plan for a material and generated inspection lot after GR from PO. But it's status is coming as CRTD CHCR SPRQ, release status is not coming, pls suggest where i want to look for this?.

    Hello,
    I am having a similar issue with inspection lots. The information provided has been very helpful, but I have not been able to resolve my issue. Forgive me if my terminology is not clear as SAP is very new to me. Here goes:
    When my inspectors try to enter an inspection lot with transaction QE01, they receive the error "The function you selected cannot be carried out."  When you click the detailed info button, a transaction analysis box appears with the following info:
    Influence of System Status on Transactions
    Stat       Description         Influence
    CRTD    Created             Disallowed 
    If you click on status display instead detailed info, there is a system status tab  with CRTD, PREQ, CHCR & SPRQ. All four options are checked, but to the right of the first two there is a grayed out piece of paper with an arrow. It appears the system is checking for these features, but they aren't properly set up.
    As of now, we have no inspection plans, so material is simply checked to drawings and specifications and and an accept/reject usage decision is entered by receiving inspectors. My immediate concern is to get the material released that is stuck in inspection. If I click on the inspection task list, there is no task list created for the material.
    Our receiving inspection supervisor was the only one trained in QM and he left the company this week. Is anyone familiar with this error?I'm desperate for a solution.
    Regards,
    N. King

  • Inspection lot for inspection type 08

    Hi Eperts,
    Please tell me following:
    Inspection lot does not create when transfer material from plant to plant.
    Created STO PO in plant 1000. Issueing plant is 2000.
    MMR maintained in both plant with inspection type 01,08 activated in both plant.
    As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
    What could be problem.
    Regards,
    Raja

    Hi Raja,
    In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
    For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
    In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = '  ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
    Regards,
    Roderick

  • Batch number archiving- Inspection lot is causing the problem

    Hai,
    I am trying to archive a batch, but I do receive the below message:
    u201CMaterial is used in Inspection Lotu201D. Message number W4123.
    How do I archive an Inspection Lot?
    Note We are not using Long term Inspection.. We are in ECC 6.
    Anyone had this issue before?
    Thank you in advance!
    Sonali

    Hi Senthil,
    Thank you for your reply. Infact, I do not have any open inspection lots. UD was done against it. I could successfully archive the inspection lot. The status on the inspection lot is now ARCH. Now I ran MM_SPSTOCK to archive the associated batch number. But still I get message "Material is used in Inspection Lots".
    any ideas?
    I am actually going to post this under PLM forum.
    Thank you!
    Sonali

  • Archiving batch- material used in inspection lot error

    Hai,
    I am trying to archive a batch, but I do receive the below message:
    u201CMaterial is used in Inspection Lotu201D. Message number W4123.
    Prior to this I archived the existing Inspection Lot using u2018QM_CONTROLu2019. The status on the inspection lot is now ARCH. There are no other open inspection lots for this material/batch.
    I ran MM_SPSTOCK to archive the associated batch number. But still I get message "Material is used in Inspection Lot".
    Note We are not using Long term Inspection.. We are in ECC 6.
    Did anyone has this same issue before?
    Thank you in advance!
    Sonali

    Sonali
    Just check the existing batch & Material combination - that particular material -recurring inspection09 is selected or anyone of the batch & Material is QI stock.
    Thanks
    Sami

Maybe you are looking for

  • SAP SD issue in MTO situation

    Folks, In a Make to Order situation the production orders are created and are released-confirmed with no missing parts, the order howerver doesnt have schedule lines created (in sales order) on the expected finish date of the prod. order. Can you ple

  • Read definition of internal table

    is it possible that you can read all fields of an internal table which are for example defined as an quan?

  • Sync says I already have it set up, but I never set it up

    I tried to set up a sync account, Firefox says I already have a sync account, but I never set one up, how do I reset the whole thing for my e-mail address or name, I don't have the password because I didn't set it up.

  • Pricing/euro: Attention: Euro Customizing not maintained

    Hi All, While creating Sales Order for EURO customer, it is giving following error : Pricing/euro: Attention: Euro Customizing not maintained. I have maintained EURO exchange rate in OB08 Transaction. What could be the problem, give us immediate solu

  • FPGA: are typedef coercion dots bad for efficiency?

    Howdy-- Using LV 2011 FPGA, I always get coercion dots when reading or writing to/from FIFO or Memory items typed with a typedef.ctl.  Do these indicate some extra use of resources in the compiled code, or are they harmless? Thanks a bunch all, and h