To : Oracle Team.. xmldom.writetoclob is too slow
HI;
I had Oracle 8.1.6, Used the xmldom package a lot to manipulate and create xml documents ( all sizes ). then I used xmldom.writetoclob which it was giving a GREAT performance.
I UPGRADED ti Oracle 8.1.7 and xmldom.writetoclob is TOO SLOW now, I have the same settings ( java_pool_size, share_pool, etc)
What changed from 8.1.6 to 8.1.7 ??
Why xmldom.writetoclob is so much slower in 8.1.7 ??
when tranfering a 300 KB document with 8.1.6 it used to take 30 seconds, no with 8.1.7 IT TAKES 2-1/2 minutes ?????
WHY ? ? ? ? ?
Tahnks for any information..
My guess is that you are creating a clob with cached set to false
e.g
dbms_lob.createtemporary(v_myclob,false);
When set to false any time the clob is written to the characters are written to the disk. causing it to be slow.
try
dbms_lob.createtemporary(v_myclob,true);
I had the same problem. This speeds it up significantly
Rick Laird
Similar Messages
-
Oracle 10g direct path write too slow
Hi All,
We have Oracle 10g on a Solaris virtual server, VMWare ESXi being the host. Data files are on RAID1, internal storage on a HP DL585 with VMFS partition at ESXi level. Problem is that DB writes for a CREATE TABLE as SELECT... statement is way too slow. To create a table which is 0.5 GB, DB takes 9 minutes which amounts to 1 MB/s. When we check for FTP or file copy at Solaris level with same size file (0.5 GB), it flies through in less than a minute. This is Oracle 10.2.0.4, 8K data block, 2 vCPU assigned to the Solaris VM. Have checked with VMWare support for any known issues and also have SR open with Oracle for any param changes that can help speed up things. Any clues or pointers from you all will be of great help.
Thanks,
NikhilHere's the output from tkprof for waits
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
single-task message 1 0.17 0.17
SQL*Net message to dblink 150 0.00 0.00
SQL*Net message from dblink 150 0.04 0.32
SQL*Net message to client 1 0.00 0.00
direct path write temp 4003 1.16 804.93
direct path read temp 2563 0.14 35.86
SQL*Net more data from dblink 126967 0.17 11.81
SQL*Net message from client 1 17.73 17.73
Direct Path write temp has total waits of 804.93. Also, I am NOT looking to tune a particular SQL. Database is overall slow on VMware and I am looking for any gotchas for running Oracle 10g within a Solaris VM.
Thanks,
Nikhil -
Oracle BPM Composer and other Apps Too Slow
Dear Forum Members,
I made a installation of Oracle BPM/SOA Suite in a Development VM with 5GB RAM.
The web applications such as BPM Composer, EM, Weblogic Console are too slow. They take too much time to load.
I am using the JRockit JVM and Centos 6.
Regards.Bump up your memory to 8gb and then look at your xmx setting in your startWeblogic.sh and ensure it's 3072m or more.
-
Steve, why is xmldom.writetoclob so slow ??
I am using xmldom.writetoclob, which is OK when transfering small ( < 1MG ) documents to a CLOB, but as the documetns get bigger it is very slow..
It takes 15 minutes to transfer a 5MB document to a clob using xmldom.writetoclob.
Anything I should be doing to see better results ?
Thanks.
I am using the PL/SQL parserwhat is your java_pool_size?
-
New iMac running 10.10.1 frequently pauses, way too slow
I recently bought a 27 inch iMac, installed Yosemite, and migrated my files by time machine from a 5 year old macbook Pro running Snow Leopard. Since updating to 10.10.1, I frequently get the spinning beachball while I wait to continue, and everything seems much slower than it should. Safari downloads take forever, compared to Firefox. I ran an EtreCheck report pasted below. I tried some easy fixes like removing desktop clutter, reducing transparency, but that doesn't affect the overall slowness. Any solutions welcome!
Problem description:
Installed Yosemite on new iMac, migrating from snow leopard on an older macbook pro. Instead of being fast, processes frequently pause for bit while the beachball spins, then resume. Way too slow, much slower than my old macbook pro.
EtreCheck version: 2.0.11 (98)
Report generated November 24, 2014 at 5:06:30 PM EST
Hardware Information: ℹ️
iMac (27-inch, Late 2013) (Verified)
iMac - model: iMac14,2
1 3.2 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 755M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 2:7:57
Disk Information: ℹ️
APPLE HDD ST1000DM003 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (749.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital Ext HDD 1021 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Time Machine New (disk2s2) /Volumes/Time Machine New : 2.00 TB (193.57 GB free)
Seagate Expansion Desk 2 TB
S.M.A.R.T. Status: Verified
NewArchive (disk3s1) /Volumes/ NewArchive : 2.00 TB (11.39 GB free)
Western Digital Ext HDD 1021 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
Bootable Backup New (disk1s2) /Volumes/Bootable Backup New : 500.10 GB (254.99 GB free)
Storage New (disk1s3) /Volumes/Storage New : 499.62 GB (480.72 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) Support
[not loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) Support
[loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) Support
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d13) Support
[not loaded] com.fklt.driver (1.8.0) Support
[not loaded] com.flipvideo.IOUSBCameraMassStorage (1.0.1) Support
[not loaded] com.novatelwireless.driver.3G (2.2.8) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) Support
[not loaded] com.rogueamoeba.InstantOn (6.0.3 - SDK 10.6) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (2.0.2) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (2.0.2) Support
/System/Library/Extensions/InstantOn.kext/Contents/PlugIns
[not loaded] com.rogueamoeba.InstantOnCore (6.0.3 - SDK 10.6) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.2.8) Support
/Volumes/Bootable Backup New/Applications/ CD burn & label ƒ/Toast 8.0.5 Titanium ƒ/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.roxio.TDIXController (1.7) Support
/Volumes/Bootable Backup New/Applications/ Multimedia ƒ/TuneClone ƒ/TuneClone.app
[not loaded] com.tuneclone.driver.TuneClone_Virtual_CDWriter (1.0.0d1) Support
/Volumes/Bootable Backup New/Applications/ My Utilities ƒ/Little Snitch 2.2 ƒ/Little Snitch Installer.app
[not loaded] at.obdev.nke.LittleSnitch (2.2.05) Support
/Volumes/Bootable Backup New/Applications/Cloak.app
[not loaded] com.bourgeoisbits.cloak.tun (1.0.1) Support
/Volumes/Bootable Backup New/Applications/Utilities/DiskWarrior ƒ/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.2) Support
Startup Items: ℹ️
NoteburnerService: Path: /System/Library/StartupItems/NoteburnerService
M-Audio FireWire Audio Helper: Path: /Library/StartupItems/M-Audio FireWire Audio Helper
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[loaded] com.avira.antivirus.general.agent.plist Support
[loaded] com.avira.antivirus.ipm.ui.plist Support
[failed] com.avira.antivirus.notifications.agent.plist Support
[loaded] com.avira.antivirus.odscan.default.plist Support
[loaded] com.avira.antivirus.scheduler.agent.plist Support
[running] com.avira.antivirus.systray.plist Support
[loaded] com.avira.antivirus.telemetry.agent.plist Support
[loaded] com.avira.antivirus.update.default.plist Support
[running] com.flipvideo.FlipShare.AutoRun.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.Logitech.Control Center.Daemon.plist Support
[loaded] com.smithmicro.cleaning.quickbackupcheck.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[not loaded] com.atomicbird.macaroni.launchd.plist Support
[failed] com.avira.antivirus.dbcleaner.plist Support
[loaded] com.avira.antivirus.ipm.loader.plist Support
[running] com.avira.helper.watchdox.plist Support
[loaded] com.barebones.bbedit.plist Support
[loaded] com.bombich.ccc.plist Support
[invalid?] com.bombich.ccc.scheduledtask.EE7EE552-88D4-41A7-BB96-B7F2F891EA0D.plist Support
[running] com.bombich.ccchelper.plist Support
[running] com.flipvideo.FlipShareServer.launchd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.m-audio.firewire.helper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sibelius.sari.plist Support
[invalid?] com.sierrawireless.SierraReset.plist Support
[running] com.sierrawireless.SWoCMon.plist Support
[running] com.smithmicro.schedulerdaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.bombich.ccc-user-agent.plist Support
[running] com.c-command.SpamSieve.LaunchAgent.plist Support
[running] com.smithmicro.cleaning.schedulermailer.plist Support
[running] com.spotify.webhelper.plist Support
[running] ws.agile.1PasswordAgent.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
GrowlMenu Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlMenu.app)
Dropbox Application (/Applications/Dropbox ƒ/Dropbox.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Scorch: Version: (null) - SDK 10.2 Support
SpeedDownload Browser Plugin: Version: 2.1.5 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Myriad Music Plugin: Version: 5.6.2 Support
RealPlayer Plugin: Version: (null) Support
DirectorShockwave: Version: 11.5.0r596 Support
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
AmazonMP3DownloaderPlugin1017277: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
DivXBrowserPlugin: Version: 2.1 Support
CouponPrinter-FireFox: Version: Version 1.1.5
CANONiMAGEGATEWAYDL: Version: 3.1.0.2 Support
OVSHelper: Version: 1.1 Support
Google Earth Web Plug-in: Version: 7.1 Support
AmazonMP3DownloaderPlugin101750: Version: AmazonMP3DownloaderPlugin 1.0.17 - SDK 10.4 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
OfficeLiveBrowserPlugin: Version: 12.2.7 Support
Safari Extensions: ℹ️
Videobox
DivX Plus Web Player HTML5 <video>
PriceBlink-1
Speed Download
Add To Amazon Wish List
Exposer
Discount Search for Amazon
StumbleUpon
WOT-1
1Password
YouTube Downloader
Rotten Tomatoes
Compass
3rd Party Preference Panes: ℹ️
3ivx MPEG-4 Support
A Better Finder Preferences Support
RCDefaultApp
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
PreferencesPane Support
Macaroni Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 250.11 GB
Destinations:
Time Machine New [Local]
Total size: 2.00 TB
Total number of backups: 33
Oldest backup: 2014-11-13 07:38:50 +0000
Last backup: 2014-11-24 21:19:47 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 250.11 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% avlogwriter
1% loginwindow
1% avguard-ondemand-mgmt
0% fontd
Top Processes by Memory: ℹ️
601 MB savapi
352 MB mds_stores
309 MB avguard.bin
301 MB loginwindow
206 MB Mail
Virtual Memory Information: ℹ️
2.80 GB Free RAM
3.83 GB Active RAM
978 MB Inactive RAM
974 MB Wired RAM
5.87 GB Page-ins
0 B Page-outsStart time: 10:22:44 01/10/15
Model Identifier: iMac11,1
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 20:24
SATA
Hitachi HDS722020ALA330
USB
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
Hub (NEC Corporation)
Backup+ Desk (Seagate LLC)
My Book 1110 (Western Digital Technologies, Inc.)
Backup+ Desk (Seagate LLC)
hp LaserJet 3380 (Hewlett Packard)
Officejet Pro 8600 (Hewlett Packard)
Diagnostic reports
2014-12-19 DashlaneAgent crash
2014-12-21 QuickLookSatellite crash
2014-12-22 DashlaneAgent crash
2014-12-27 DashlaneAgent crash
2014-12-28 HelpViewer crash
2014-12-30 DashlaneAgent crash
2015-01-05 Microsoft Word hang
Log
Jan 10 10:19:18 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:28 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:38 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:48 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:19:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:20:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:21:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:29 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:39 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:49 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:22:59 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:09 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Jan 10 10:23:19 com.carbonite.daemon: Service could not initialize: Unable to set current working directory. error=2, path=/Library/Application Support/Carbonite: 14B25: xpcproxy + 12907 [1227][UUID]: 0x2
Memory: kernel_task (UID 0) is using 1332 MB
kexts
com.seagate.driver.PowSecDriverCore (5.2.6)
com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6)
com.vmware.kext.vmci (90.5.7)
com.vmware.kext.vsockets (90.5.7)
com.vmware.kext.vmnet (0188.79.83)
com.vmware.kext.vmx86 (0188.79.83)
com.vmware.kext.vmioplug.12.1.17 (12.1.17)
Daemons
com.carbonite.daemon
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.apple.aelwriter
com.adobe.fpsaud
com.bombich.ccchelper
com.seagate.TBDecorator.plist
com.bombich.ccc
Agents
com.sony.PMBPortable.AutoRun
com.bombich.ccc-user-agent
com.google.Chrome.framework.service_process/Users/USER/Library/Application_Supp ort/Google/Chrome
com.leadertech.PowerRegister.SEA1.UUID
com.adobe.AdobeCreativeCloud
com.carbonite.carbonitestatus
com.adobe.PDApp.AAMUpdatesNotifier.96592.UUID
com.apple.MassStorageCamera.315272.UUID
com.adobe.ARM.UUID
com.bombich.cccuseragent
com.seagate.dashboard
com.adobe.CS5ServiceManager
com.oracle.java.Java-Updater
com.citrixonline.GoToMeeting.G2MUpdate
com.adobe.ARM.UUID
com.google.keystone.user.agent
com.apple.AirPortBaseStationAgent
com.hp.scanModule3.64216.UUID
com.carbonite.carbonitealerts
Startup items
/Library/StartupItems/HP IO/HP IO
/Library/StartupItems/HP IO/StartupParameters.plist
/Library/StartupItems/HP USB EWS Gateway/HP USB EWS Gateway
/Library/StartupItems/HP USB EWS Gateway/StartupParameters.plist
/Library/StartupItems/HPlaserjet Trap Monitor/HPlaserjet Trap Monitor
/Library/StartupItems/HPlaserjet Trap Monitor/StartupParameters.plist
/Library/StartupItems/VirtualBox/StartupParameters.plist
/Library/StartupItems/VirtualBox/VirtualBox
Bundles
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/MicrosoftMouse.kext
- com.microsoft.driver.MicrosoftMouse
/System/Library/Extensions/Seagate Storage Driver.kext
- com.seagate.driver.PowSecDriverCore
/Library/Extensions/VBoxDrv.kext
- org.virtualbox.kext.VBoxDrv
/Library/Extensions/VBoxNetAdp.kext
- org.virtualbox.kext.VBoxNetAdp
/Library/Extensions/VBoxNetFlt.kext
- org.virtualbox.kext.VBoxNetFlt
/Library/Extensions/VBoxUSB.kext
- org.virtualbox.kext.VBoxUSB
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/AdobeExManDetect.plugin
- com.AdobeExManDetectLib.AdobeExManDetect
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Carbonite.prefPane
- com.carbonite.prefpanel
/Library/PreferencePanes/DashboardPreferences.prefPane
- com.seagate.dashboard.preferences
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/Growl.prefPane
- com.growl.prefpanel
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/Microsoft Mouse.prefPane
- com.microsoft.microsoftmouse
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Caches/com.apple.Safari/Extensions/Dashlane-2.safariextension
- com.dashlane.dashlanesafari
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Dashlane.plugin
- com.DashlaneLib.Dashlane
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Widgets/HP Ink Widget.wdgt
- com.hp.widget.inkwidget
Apps
/Volumes/iMac27 Desktop Clone/Applications/Google Drive.app
/Volumes/iMac27 Desktop Clone/Applications/Google Drive 2.app
/Applications/Google Drive.app
/Applications/Google Drive 2.app
Contents of /System/Library/LaunchDaemons/com.seagate.TBDecorator.plist (checksum 3070240373)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.TBDecorator.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.TBDecorator.plist</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/TBLoopDriveParams</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitealerts.plist (checksum 3096452879)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitealerts</string>
<key>OnDemand</key>
<true/>
<key>RunAtLoad</key>
<false/>
<key>WatchPaths</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/Resources/</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteAlerts.app/Contents/MacOS/CarboniteAlerts</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.carbonite.launchd.carbonitestatus.plist (checksum 2411194237)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.carbonite.carbonitestatus</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteStatus.app/Contents/MacOS/CarboniteStatus</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 1821332316)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>16</integer>
<key>Minute</key>
<integer>33</integer>
<key>Weekday</key>
<integer>4</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.sony.PMBPortable.AutoRun.plist (checksum 2288250257)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.sony.PMBPortable.AutoRun</string>
<key>OnDemand</key>
<true/>
<key>Program</key>
<string>/Library/Application Support/Sony/PMBPortableAutoRun.app/Contents/MacOS/PMBPortableAutoRun</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 2593636600)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/MacOS</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 2362964135)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</string>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
...and 6 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.bombich.ccc</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
...and 7 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1847580806)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Media Disk" to "Music". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 229 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1637450734)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Pictures" to "Pictures Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 207 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 1138618051)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "Aperture Library" to "Aperture Library Backup". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be left alone.
• Files on the destination will be updated only if they are newer on the source.
• Older versions of updated files will be archived.
• CCC will not prune archive content.</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 233 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccc.scheduledtask.UUID.plist (checksum 3444763627)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc.scheduledtask.UUID</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/ccchelper.app/Contents/MacOS/ccchelper</string>
<string>UUID</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceDescription</key>
<string>CCC will copy the selected items from "MacHD" to "iMac27 Desktop Clone". If you have backed up to this destination in the past, only items that have been modified since the last backup task will be copied.
• Files and folders unique to the destination will be permanently deleted.
• Files on the destination will be updated if the size or modification date differs.
• Older versions of updated files will not be archived.
</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/CCC.log</string>
...and 209 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist (checksum 495358405)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.carbonite.launchd.carbonitedaemon.plist (checksum 2948711974)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.carbonite.daemon</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Carbonite/CarboniteDaemon.app/Contents/MacOS/CarboniteDaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>OnDemand</key>
<false/>
<key>WorkingDirectory</key>
<string>/Library/Application Support/Carbonite</string>
<key>StandardOutPath</key>
<string>/Library/Logs/Carbonite1.log</string>
<key>StandardErrorPath</key>
<string>/Library/Logs/Carbonite2.log</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 13465011)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Debug</key>
<true/>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer 8/TeamViewer.app/Contents/Resources</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 578238223)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist (checksum 926752576)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.bombich.ccc-user-agent.plist (checksum 1605626007)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.bombich.ccc-user-agent</string>
<key>Program</key>
<string>/Users/USER/Downloads/Carbon Copy Cloner.app/Contents/MacOS/CCC User Agent.app/Contents/MacOS/CCC User Agent</string>
<key>StandardErrorPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
<key>StandardOutPath</key>
<string>/Users/USER/Library/Logs/CCC.log</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.google.Chrome.framework.plist (checksum 2813695882)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.google.Chrome.framework.service_process/Users/USER/Library/Applicat ion_Support/Google/Chrome</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Program</key>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Google Chrome.app/Contents/Versions/25.0.1364.152/Google Chrome Helper.app/Contents/MacOS/Google Chrome Helper</string>
<string>--type=service</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>Sockets</key>
<dict>
<key>ServiceProcessSocket</key>
...and 7 more line(s)
Contents of Library/LaunchAgents/com.google.keystone.agent.plist (checksum 4195197102)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.user.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bu ndle/Contents/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftw areUpdateAgent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.leadertech.PowerRegister.SEA1.UUID.plist (checksum 2799483814)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.leadertech.PowerRegister.SEA1.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/Resources/Seagate.app/Contents/Resources/SeagateRegRemin der.app/Contents/MacOS/SeagateRegReminder</string>
</array>
<key>StartInterval</key>
<integer>3600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.seagate.dashboard.plist (checksum 1981328959)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.seagate.dashboard</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Seagate Dashboard.app/Contents/MacOS/Seagate Dashboard</string>
<string>-runMode</string>
<string>autoLaunched</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/org.virtualbox.vboxwebsrv.plist (checksum 3654809970)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>org.virtualbox.vboxwebsvc</string>
<key>Program</key>
<string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string>
<key>Sockets</key>
<dict>
<key>Listeners</key>
<dict>
<key>SockServiceName</key>
<string>18083</string>
<key>SockType</key>
<string>stream</string>
<key>SockFamily</key>
<string>IPv4</string>
</dict>
</dict>
</dict>
...and 1 more line(s)
Global login items
/Applications/HP LaserJet Software/HP Setup Assistant.app
/Library/Application Support/hp/laserjet/Trap Monitor/HPEventHandler.app
Firewall: On
DNS: 216.40.77.126
Listeners
cupsd: ipp
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
VMware Fusion Start Menu
- /Applications/VMware Fusion.app/Contents/Library/VMware Fusion Start Menu.app
Google Drive
- /Applications/Google Drive.app
Canon IJ Network Scanner Selector2
- /Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app
Android File Transfer Agent
- /Users/USER/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app
AdobeResourceSynchronizer
- /Applications/Adobe Acrobat X Pro/Adobe Acrobat Pro.app/Contents/Support/AdobeResourceSynchronizer.app
Eye-Fi Helper
- /Applications/Eye-Fi/Eye-Fi Helper.app
Google Chrome
- /Applications/Google Chrome.app
Launch Nikon Message Center 2
- /Applications/Nikon Software/Nikon Message Center 2/Nikon Message Center 2.app/Contents/SharedSupport/Launch Nikon Message Center 2.app
Safari extensions
Dashlane
Restricted files: 513
Lockfiles: 4
High file counts
Desktop: 125
Elapsed time (s): 584 -
My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I am only running Firefox, Papers2 and Pages and 3.99GB of my 4GB ram is being used up. A detailed description of my system I took with EtreCheck is below.
There is a kernel task that is using a lot of my memory, does anyone know what this is ?
I hope someone can help me !
Best,
Problem description:
my computer is too slow!
EtreCheck version: 2.0.10 (97)
Report generated 2 November 2014 08:09:22 CET
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 4:17:44
Disk Information: ℹ️
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (94.22 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Incompatible Software/InterCheck.app
[not loaded] com.sophos.kext.sav (7.1.1) Support
/Incompatible Software/Parallels Service.app
[not loaded] com.parallels.kext.prl_hid_hook (6.0 12106.692267) Support
[not loaded] com.parallels.kext.prl_hypervisor (6.0 12106.692267) Support
[not loaded] com.parallels.kext.prl_netbridge (6.0 12106.692267) Support
[not loaded] com.parallels.kext.prl_usb_connect (6.0 12106.692267) Support
[not loaded] com.parallels.kext.prl_vnic (6.0 12106.692267) Support
/Library/Extensions
[loaded] org.virtualbox.kext.VBoxDrv (4.1.8) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.1.8) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.1.8) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.1.8) Support
/System/Library/Extensions
[not loaded] com.haier.driver.evdo (1.0.6) Support
Startup Items: ℹ️
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
VirtualBox: Path: /Library/StartupItems/VirtualBox
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[invalid?] com.cisco.anyconnect.gui.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.adobe.versioncueCS3.plist Support
[running] com.cisco.anyconnect.vpnagentd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.mozy.backup.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.sophos.autoupdate.plist Support
[invalid?] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.akamai.client.plist Support
[running] com.spotify.webhelper.plist Support
[invalid?] org.virtualbox.vboxwebsrv.plist Support
User Login Items: ℹ️
Citations UNKNOWN (missing value)
iTunesHelper UNKNOWNHidden (missing value)
Google Notifier UNKNOWN (missing value)
EvernoteHelper UNKNOWN (missing value)
Skype UNKNOWN (missing value)
Google Notifier UNKNOWN (missing value)
Mozy Status UNKNOWN (missing value)
iAntiVirus UNKNOWNHidden (missing value)
TTSL Olive VME101 Dialer UNKNOWN (missing value)
SOHOCalendarsService UNKNOWN (missing value)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
SophosUIServer Application (/Library/Sophos Anti-Virus/SophosUIServer.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.2.1.11 Support
AmazonMP3DownloaderPlugin1016264: Version: AmazonMP3DownloaderPlugin 1.0.16 Support
OfficeLiveBrowserPlugin: Version: 12.3.2 Support
RealPlayer Plugin: Version: Unknown
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.5.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 9.5.5 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.79 Support
Move_Media_Player: Version: npmnqmp 071503000004 Support
Picasa: Version: 1.0 Support
Safari Extensions: ℹ️
Evernote Web Clipper
Save to Pocket
Feeder
3rd Party Preference Panes: ℹ️
AppTrap Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
Growl Support
Java Support
MacFUSE Support
Xmarks for Safari Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Destinations:
Time Machine Backups [Local]
Total size: 999.86 GB
Total number of backups: 74
Oldest backup: 2011-09-30 09:35:52 +0000
Last backup: 2014-10-29 15:40:43 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
23% storeagent
10% WindowServer
1% mds_stores
1% sysmond
1% plugin-container
Top Processes by Memory: ℹ️
442 MB firefox
146 MB Finder
139 MB mds_stores
125 MB installd
107 MB WindowServer
Virtual Memory Information: ℹ️
479 MB Free RAM
1.40 GB Active RAM
1.00 GB Inactive RAM
916 MB Wired RAM
1.21 GB Page-ins
114 MB Page-outsRAM usage as such is not your problem since Mavericks is designed to use as much as is available. Read this:
http://support.apple.com/kb/HT5890
Since you have Parallels installed, a RAM increase would be beneficial.
Ciao. -
Error While Writing DOM to a CLOB i.e. xmldom.writeToClob
I am running into error while writng and reading from a clob. The Sample Code is as follows :
declare
p xmlparser.Parser;
doc xmldom.DOMDocument;
i_tmp CLOB;
i_tmp1 CLOB;
i_buffer varchar2(32767);
i_amount pls_integer;
begin
p := xmlParser.NewParser;
xmlparser.setbaseDir(p,'/sqlcom/inbound');
xmlparser.setValidationMode(p, TRUE);
xmlparser.showwarnings(p, TRUE);
xmlparser.seterrorlog(p, '/sqlcom/inbound/veshaal.err');
xmlparser.parse(p,'/sqlcom/inbound/mpoi.xml');
doc := xmlparser.getDocument(p);
dbms_lob.createtemporary(i_tmp1,true,dbms_lob.session);
xmldom.writeToClob(doc,i_tmp1);
xmldom.writeToFile(doc,'/sqlcom/inbound/veshaal_out.xml');
dbms_lob.createtemporary(i_tmp,true,dbms_lob.session);
xmldom.writeTobuffer(doc,i_buffer);
dbms_lob.write(i_tmp,length(i_buffer),1,i_buffer);
i_amount := dbms_lob.getLength(i_tmp);
dbms_lob.read(i_tmp,i_amount,1,i_buffer);
dbms_lob.freetemporary(i_tmp1);
commit;
exception
when others then
dbms_lob.freetemporary(i_tmp1);
dbms_output.put_line(SQLERRM);
end;
The oracle Error is as follows:
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
The above code works while I try to write to a buffer or a file using xmldom.writeToFile or xmldom.writeToBuffer.
The xmlparser v2 is running inside the 8i ( 8.1.5.0. ) database.
The alert file has the following entry :
Errors in file /home/applrt/db/superbwl/log/superbwl_ora_2371.trc:
ORA-07445: exception encountered: core dump [EE1F05DC] [SIGSEGV] [Address not mapped to object] [0] [] []
Any help will be appreciated.
Thanks
nullUTL_FILE comes as part of the database, you shouldn't have to install it, and you most certainly shouldn't install it as SCOTT. System packages should be installed using a system user such as sys.
Firstly, I would suggest dropping the UTL_FILE package from your scott schema and then logging on as sys and granting execute permission on UTL_FILE to the scott user.
Secondly...
The UTL_FILE_DIR parameter has been deprecated by oracle in favour of direcory objects because of it's security problems.
The correct thing to do is to create a directory object e.g.:
CREATE OR REPLACE DIRECTORY mydir AS 'c:\myfiles';Note: This does not create the directory on the file system. You have to do that yourself and ensure that oracle has permission to read/write to that file system directory.
Then, grant permission to the users who require access e.g....
GRANT READ,WRITE ON DIRECTORY mydir TO myuser;Then use that directory object inside your FOPEN statement e.g.
fh := UTL_FILE.FOPEN('MYDIR', 'myfile.txt', 'r');Note: You MUST specify the directory object name in quotes and in UPPER case for this to work as it is a string that is referring to a database object name which will have been stored in uppercase by default. -
My EBS is too slow on windows 7
My ebs is too slow when i use it on windows 7 but on older version on windows is working fine.
Could somebody know what is the issue or how can we solve it?
ThanksMy ebs is too slow when i use it on windows 7 but on older version on windows is working fine.This is a client issue and not an Application/Database issue.
Do you meet all the requirements in these docs?
Recommended Browsers for Oracle E-Business Suite 11i (Doc ID 285218.1)
Recommended Browsers for Oracle E-Business Suite Release 12 (Doc ID 389422.1)
Could somebody know what is the issue or how can we solve it?Please see these docs.
Oracle E-Business Suite 11i and 12 PC Client Performance [ID 557259.1]
Tuning performance on eBusiness suite [ID 744143.1]
A Holistic Approach to Performance Tuning Oracle Applications Systems [ID 69565.1]
Thanks,
Hussein -
Dear All,
We are running SAP Solution Manager 7.01 on Oracle 11g in AIX.
This central Solution Manager system is connected to more than 150 satellite systems.
The response of the system is too slow while we take transactions like solman_workcenter, RZ20 etc.
Is this because the system needs to fetch/collect infromation from all these 150 satellites before preseting the screen.
Solman is running with 10 CPU, 50 GB RAM and 82 GB swap.
The portal pages in the transactions takes more time to load.
Could you please help me to pin point the bottle neck in the system.
Regards,
KiranHi,
Basically with 150 systems you may experience network capacity issue.
It does not matter if the system is the Solution Manager or any other SAP system. The analysis start from inspecting the overall time distribution by using the /nSTAD, then depending on the outcome check persistency, remote communication and locking with ST05 .
If in STAD there are huge wait times then definitely the network capacity should be inspected with OS-level monitoring tools, same for the CPU, memory and disk.
Regarding the java side views, it is very important to inspect the java side performance using the JDSR statistics in NetWeaver Web Administrator. There you would see the java side resource consumption to localize a potential memory consumption or CPU related issue. It is very important to clarify if the bottleneck is not the Garbage collection in java - if that is the case, the heap size parameters need to be tuned.
Best Regards,
Sylvia -
Hi DB Gurus,
Our application is inserting 60-70K records in a table in each transaction. When multiple sessions are open on this table user face performance issues like application response is too slow.
Regarding this table:
1.Size = 56424 Mbytes!
2.Count = 188,858,094 rows!
3.Years of data stored = 4 years
4.Average growth = 10 million records per month, 120 million each year! (has grown 60 million since end of June 2007)
5.Storage params = 110 extents, Initial=40960, Next=524288000, Min Extents=1, Max Extents=505
6.There are 14 indexes on this table all of which are in use.
7. Data is inserted through bulk insert
8. DB: Oracle 10g
Sheer size of this table (56G) and its rate of growth may be the culprits behind performance issue. But to ascertain that, we need to dig out more facts so that we can decide conclusively how to mail this issue.
So my questions are:
1. What other facts can be collected to find out the root cause of bad performance?
2. Looking at given statistics, is there a way to resolve the performance issue - by using table partition or archiving or some other better way is there?
We've already though of dropping some indexes but it looks difficult since they are used in reports based on this table (along with other tables)
3. Any guess what else can be causing this issue?
4. How many records per session can be inserted in a table? Is there any limitation?
Thanks in advance!!Hi DB Gurus,
Our application is inserting 60-70K records in a
table in each transaction. When multiple sessions are
open on this table user face performance issues like
application response is too slow.
Regarding this table:
1.Size = 56424 Mbytes!
2.Count = 188,858,094 rows!
3.Years of data stored = 4 years
4.Average growth = 10 million records per month, 120
million each year! (has grown 60 million since end of
June 2007)
5.Storage params = 110 extents, Initial=40960,
Next=524288000, Min Extents=1, Max Extents=505
6.There are 14 indexes on this table all of which are
in use.
7. Data is inserted through bulk insert
8. DB: Oracle 10g
Sheer size of this table (56G) and its rate of growth
may be the culprits behind performance issue. But to
ascertain that, we need to dig out more facts so that
we can decide conclusively how to mail this issue.
So my questions are:
1. What other facts can be collected to find out the
root cause of bad performance?
2. Looking at given statistics, is there a way to
resolve the performance issue - by using table
partition or archiving or some other better way is
there?
We've already though of dropping some indexes but it
looks difficult since they are used in reports based
on this table (along with other tables)
3. Any guess what else can be causing this issue?
4. How many records per session can be inserted in a
table? Is there any limitation?
Thanks in advance!!You didn't like the responses from your same post - DB Performance issue -
Xmldom.writetoclob hanging forever when writing a domnode to a temp clob
Hi
Wondering has anyone come across anything similar (or know a work around)
1. Basically the the procedure below loads an XML file. (OK)
2. Removes reference to external dtd, ref was causing and error (OK)
3. Parses the XML (OK)
4. Gets a list of the "item" tags (OK) - should be up to 500 item elements in XML
5. Loops on all elements
a. writes node to temp clob *(PROBLEM HERE)*
b. Creates xmltype from clob (OK)
c. transforms xmltype and assigns to another xmltype (OK)
d. inserts new xmltype (OK)
This procedure is used by a threaded os java app to load thousands of files to db.
It works fine 99% of the time but for some files the procedure is hanging at (5.a : write domnode to clob using xmldom.writetoclob)
I am absolutely sure the problem is due to the characters in the domnode as all files that have hung on processing contain these bizarre characters,
the db character set is Unicode AL32UTF8 so it should be able to handle almost anything, saying that, if the it is a prob with the characters then why does
the loadclobfromfile procedure succeed.
Developed on Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
I have no prob rejecting node and continue processing but procedure just hangs and i have to kill the thread on the os.
Is there a way to
1. Test for invalid AL32UTF8 chars and skip on error.
or
2. Get around the xmldom.writetoclob procedure and create an xmltype from the xmldom.domnode (i tried to convert domnode -> domdocument -> xmltype, no joy)
or
Open to suggestions
PROCEDURE
PROCEDURE process_blog_xml_file (
p_file_name IN VARCHAR2,
p_insert_date IN VARCHAR2,
p_dir IN VARCHAR2 DEFAULT NULL
IS
newsurl VARCHAR2 (80);
parser xmlparser.parser;
newsxml xmldom.domdocument;
titles xmldom.domnodelist;
titles_found NUMBER;
curnode xmldom.domnode;
textchild xmldom.domnode;
dest_clob CLOB;
l_temp_clob CLOB;
src_clob BFILE := BFILENAME (g_zip_file_dir, p_file_name);
dst_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_ctx NUMBER := DBMS_LOB.default_lang_ctx;
warning NUMBER;
l_xml XMLTYPE;
xsldata XMLTYPE;
xmldata XMLTYPE;
l_dir VARCHAR2 (1000);
BEGIN
LOG ( 'Start Processing file '
|| p_file_name
|| ' from zip '
|| p_insert_date
IF p_dir IS NULL
THEN
SELECT directory_path
INTO l_dir
FROM all_directories
WHERE directory_name = g_zip_file_dir;
ELSE
l_dir := p_dir;
END IF;
IF g_xsl_clob IS NULL
THEN
init_xsl_clob;
END IF;
com_polecat_xmldb_utils.set_load_date
(TO_DATE (REPLACE (REPLACE (p_insert_date,
'.zip',
'DD-MM-YYYY'
LOG ('ITEM.Loaddate set : ' || com_polecat_xmldb_utils.get_load_date);
xsldata := XMLTYPE.createxml (g_xsl_clob);
LOG ('Read xsl file to clob');
DBMS_LOB.OPEN (src_clob, DBMS_LOB.lob_readonly);
DBMS_LOB.createtemporary (dest_clob, TRUE);
DBMS_LOB.loadclobfromfile (dest_lob => dest_clob,
src_bfile => src_clob,
amount => DBMS_LOB.getlength
(src_clob),
dest_offset => dst_offset,
src_offset => src_offset,
bfile_csid => NLS_CHARSET_ID
('AL32UTF8'),
lang_context => lang_ctx,
warning => warning
LOG ('Read xml file to clob');
DBMS_LOB.CLOSE (src_clob);
parser := xmlparser.newparser;
dest_clob := REPLACE (dest_clob, g_blog_dtd_remove, '');
LOG ('Parse xml ');
xmlparser.parseclob (parser, dest_clob);
DBMS_LOB.freetemporary (dest_clob);
newsxml := xmlparser.getdocument (parser);
xmlparser.freeparser (parser);
titles := xmldom.getelementsbytagname (newsxml, 'item');
LOG ('Load blogs items to ITEM table. ');
FOR j IN 1 .. xmldom.getlength (titles)
LOOP
curnode := xmldom.item (titles, j - 1);
DBMS_LOB.freetemporary (l_temp_clob);
DBMS_LOB.createtemporary (l_temp_clob, TRUE);
LOG ('write node to temp clob ' || j);
xmldom.writetoclob (curnode, l_temp_clob); <-- Hanging Here
LOG ('create xml type from clob ' || j);
l_xml := XMLTYPE.createxml (l_temp_clob);
LOG ('apply xsl transform to xml ' || j);
xmldata := l_xml.transform (xsldata);
LOG ('Insert to item table ' || j);
BEGIN
INSERT INTO item
VALUES (xmldata);
EXCEPTION
WHEN OTHERS
THEN
LOG ('Error:: ' || SQLERRM);
END;
END LOOP;
xmldom.freedocument (newsxml);
LOG ( 'Finished Processing file '
|| p_file_name
|| ' from zip '
|| p_insert_date
EXCEPTION
WHEN OTHERS
THEN
LOG (SQLERRM);
END;note variables starting with g_ are defined in package spec
Cheers
Ian
Edited by: user3604054 on 01-Apr-2010 06:52
Edited by: user3604054 on 01-Apr-2010 14:57
Edited by: user3604054 on 01-Apr-2010 15:00
Edited by: user3604054 on 01-Apr-2010 15:00
Edited by: user3604054 on 01-Apr-2010 15:05
Edited by: user3604054 on 01-Apr-2010 15:062. Get around the xmldom.writetoclob procedure and create an xmltype from the xmldom.domnode (i tried to convert domnode -> domdocument -> xmltype, no joy) Which version of Oracle (4 digits)?
Also look in the FAQ in the upper right for how to use the tag to wrap PL/SQL to retain formatting to make it easier for all to read. -
Problem with special characters and xmldom.writetoclob
Hi!
I have a problem with oracle parser in pl/sql.
My situation:
i have a clob with valid xml with for example decoded characters:
(spaces between & and # are for good representing characters by browser - in really there is no spaces)
<xml>
<any><![CDATA[ & #187; ]]> text <![CDATA[ & #187; ]]></any>
</xml>
i read this xml from clob, parse it and put into another clob by using
xmldom.writetoclob procedure.
And in second clob i have"
<xml>
<any>& #38;#187; text & #38;#187; </any>
</xml>
(ampersand is representing as & #38; !) Why there is not the cdata sections ?
Why the value of these sections changed?
Any ideas? I'm using newset xdk (9202) in 8.1.7.3 database.
Please help!Hi John,
According to your description, my understanding is that the Author showed incorrect character in SharePoint 2013 search result page.
I tested the same scenario per your post in my environment, and the Müller showed correctly in SharePoint search result page.
I recommend to reset the index in Search Service Application and run a full crawl to see if the issue still occurs.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Application response too slow- How to resolve (webLogic)
Hi All, Can you please let me know what are all the main areas that i need to concentrate in the weblogic application server if i get the complaint from the clients saying "application performance is too slow".
Edited by: user11361691 on Apr 21, 2010 12:18 AMyou need to check the following:
1: Check the server log files to find any errors at the time when the Client is complaining about the server performance.
2: You can enable the GC logs in the server log and can check whether the there is any issues with the memory usage of the server. From the GC logs you can that whether the time has been taken to to the GC and hence you can try allocating higher memory or you can try changing the GC algorithm according to the analysis.
For details refer the following link:
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/topten.html
http://download.oracle.com/docs/cd/E13222_01/wls/docs100/perform/JVMTuning.html
3: Finally you can collect the thread dumps snap shots and can see whether there are any stuck threads or deadlock situation in the server at the time of slow performance. -
EXPDP is too slow even though the value of cursor_sharing changed to EXACT.
Hi
We are having a 10g standarad edition database (10.2.0.4) on Solaris 5 which is RAC with ASM. Infact we are planning to migrate it to LINUX x86-64 and to 11.2.0.3. The database size is around 1.3 TB. We are planning to go with an expdp backup and impdp to new server and new version database.
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Solaris: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> !uname -a
SunOS ibmxn920 5.10 Generic_127128-11 i86pc i386 i86pc
As per the plan I started the expdp. But unfortunately the processing of tables even continued for one and half days and the backup didnt started also. After going through few docs I found that the CURSOR_SHARING should be EXACT to make the expdp more faster (Previously it was SIMILAR). So I changed the parameter to EXACT in one of the node and started the backup again yesterday night on the same node where I change the parameter. When today I came back still the processing going on. I checked the job status and found that the table processing is still going. It is not hanged at all. But its too slow.
What could be the reason. Here is the memory details and kernal parameter details.
Mem
Memory: 24G phys mem, 6914M free mem, 31G swap, 31G free swap
Kernal Parameters
forceload: sys/msgsys
forceload: sys/semsys
forceload: sys/shmsys
set noexec_user_stack=1
set msgsys:msginfo_msgmax=65535
set msgsys:msginfo_msgmnb=65535
set msgsys:msginfo_msgmni=2560
set msgsys:msginfo_msgtql=2560
set semsys:seminfo_semmni=3072
set semsys:seminfo_semmns=6452
set semsys:seminfo_semmnu=3072
set semsys:seminfo_semume=240
set semsys:seminfo_semopm=100
set semsys:seminfo_semmsl=1500
set semsys:seminfo_semvmx=327670
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=268435456
set shmsys:shminfo_shmmni=4096
set shmsys:shminfo_shmseg=1024
set noexec_user_stack = 1
set noexec_user_stack_log = 1
#Non-administrative users cannot change file ownership.
rstchown=1
Do I need to make changes above of these. The dump is taking to local file system.Hi,
I'd be looking at doing this in parallel over a database link and completely miss out sending anything to nfs - it will make the whole process quicker (you effectively skip the export part and everything is an import into the new instance).
I ran a 600GB impdp in this way over a db link and it maybe took 12 hours (can't remember exactly) - a lot of that time is index build in the new database so make sure your pga etc is set up correctky for that.
LOB data massively slows down datapump so that could be the issue here also. You should be able to acheive the whole process in less than a day (if you have no lobs...)
Cheers,
Harry
Maybe you are looking for
-
Caller ID not working in Mexico
Hi all. I have read a lot of documents and applied configuration changes to the voice-ports in my UC-520 but until now I can not get to work the incoming Caller ID function; I think it is a matter of matching parameters with my telephony company: Tel
-
Hi All I"ve created return delivery from customer sales return, after creating goods movement type should be for return i.e. stock should increase, instead its taking 601 m. type for Goods Issue! Where to change so that delivery takes proper m. type
-
Data from Page 1 of survey not appearing
Hi There I am in desperate need of some help here! I have created a very simple two-page interactive form in LiveCycle Designer. It works absolutely fine when I test it myself, but when I send it to a co-worker half the data (page one) is missing. I'
-
Hi I, When I use transaction PV00 to book someone on a training course a SAP screen pops up asking me to create a transport request. How can I prevent this?. I am a ABAP programmer trying to use a bapi to make the booking from workflow and this tran
-
How to remove all in and out points from extendscript code?
Hi, I am creating a sequence from a clip from extendscript code to automateToSequence function. But if there are some in and out points in the clip only the select clip part is converted as a sequence, what is the solution to remove all tho