To Output PO in the form of EDI

Hello All,
I am trying to output the PO created in reference to PR through transaction code ME21N, but unfortunately I am unable to get it triggered. I have made all the necessary entries in "Goto - >Message" Also maintained the condition record for the output type NUAE in NACE transaction for the required Purchase Requisition Type & Purchasing Group Type.
Could you please throw some light on how to get Idoc triggered.Plz be assured of being rewarded.
Thanks.
Best Regards,
Sudhanshu Garg

Hi
http://help.sap.com/saphelp_470/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm
Regards
Ram

Similar Messages

Opening landscape RTF report 11g output programmatically from the Form

Hi
Using Forms/Reports 11.1.2.0 on SLES11
If I generate the report output in PDF and the output is landscape, then openning the PDF up using web.show_document (in Adobe Reader) is fine and it shows in a wide format even if sometimes it doesn't show the whole width of the report.
If you generate a report in RTF format, then transfer the RTFdocument to the client using webutil, then open the RTF document with wordpad (again using webutil) then you can't seem to default the opening of wordpad to landscape mode. It only opens in portrait mode and the report is wrapped amd looks poor. Another option is to use MS Word and use a command line switch to run a macro that changes the format to landscape, but putting the macro in a 1000 user's Word envirnment might not be easy.
Are there any other ways to open an RTF format document in a wide format view such that the report is not wrapped within the wordprocessing environment?
Thanks for any thoughts.
Tony

Hi
Using Forms/Reports 11.1.2.0 on SLES11
If I generate the report output in PDF and the output is landscape, then openning the PDF up using web.show_document (in Adobe Reader) is fine and it shows in a wide format even if sometimes it doesn't show the whole width of the report.
If you generate a report in RTF format, then transfer the RTFdocument to the client using webutil, then open the RTF document with wordpad (again using webutil) then you can't seem to default the opening of wordpad to landscape mode. It only opens in portrait mode and the report is wrapped amd looks poor. Another option is to use MS Word and use a command line switch to run a macro that changes the format to landscape, but putting the macro in a 1000 user's Word envirnment might not be easy.
Are there any other ways to open an RTF format document in a wide format view such that the report is not wrapped within the wordprocessing environment?
Thanks for any thoughts.
Tony

Change the remittance output where tofind the form layout name

I am trying to change the remittance output ,
Can anyone let me know how to find the script that is attached to this remittance program whcih is given out in the Payment run transaciton F110,
Thanx in advance

Goto <b>FBZP transaction</b> and in the payment methods for company code push button u can see the attached form there for the respective company code.
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Text in ADOBE form not printing while printing the form

Hi All,
I have created an adobe form and am trying to trigger an output linked to the form. The problem is that the output that gets triggered does not show some of the texts which are existing in the form.
So although the values are coming correctly the overall output becomes incorrect as the text goes missing. Let me know if you have any pointers to the issue I am facing.
Cheers,
Sharadendu

Hi Sharadendu,
First of all you need to put this question in Adobe Form related Forums.
Problems can be many in this case.
1: Overflow subform not selected.
2: Some condition failing in the text or subform.
3: Incorrect nesting of subforms.
Mainly your problem will be with the subforms , so you need to croos check all the subforms which you have used to hold data.
Regards,
Sandeep Katoch

Help reqd to display the form output without print preview

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one t-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Sankar,
Simply put a parameter statement .
for example.
parameters : vbeln type vbrk-vbeln .
when u ll execute.U ll get the selection screen asking u for the perticular parameter,U input that and execute.U ll get the output as print preview.In the above query i ll input vbeln and ll get the o/p.Similarly u enter Ur getpass no and u ll get the printpreiview as o/p.
Reward if useful.
Regards
Rudra

Central Management server - executed a query but how to send the query output in the form of mail?

Hi All,
i have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers
could you please suggest how can i achieve this?

Copy to what?
SELECT COUNT(*) FROM sys.objects
Running the above statement returns two columns (server name and count)
All the servers SS2005 and onwards , then use
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'name',
@recipients = '[email protected]',
@query = 'SELECT COUNT(*) FROM sys.objects',
@subject = 'Count rows'
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to get the output of Standard HR forms in PE51

Hi Experts,
How to get the output of standard HR forms available in PE51 Transaction for coutry grouping 99.
Please advice.
Regards,
IFF

Hi
Use the t code for country grouping 99....PC00_M99_CEDT - Remuneration Statement. to get the variant in tcode PC00_M99_CALC_SIMU - Simulation.
Like this test for all the standard forms, what all are the available in PE51 for country grouping 99

How to display the Form output in multiple languages ? ------ Urgent

How to display the Form output in multiple languages ? -
Urgent

Hi,
Do u mean the Form output in 2-3 languages ...like form output will be having english russian etc...
for the above case , what u have to do ...
first have to get the transalations for all the fields
say for example : if the english word is PO Number , then u have to get the transalation text for PO Number :
after this , what u have to is ,,, Log on to SAP with russian language , then in the form o/p u have to paste that russian test ( translation text ) ...
do like this for all the components in the form .
Reward Points if it is Useful.
Thanks,
Manjunath MS

*configure the Picking list(PL) output type,a smart form for PL.

Hello SIR,
I want to configure the Picking list(PL) output type,a smart form for PL but there should be an output type to print*.
i have assign the out type to shipping point in t.code ovlt .i have created picking list in t.code nact. i created sales order and delivery. i have check my picking list in ovl2n change mode picking out put is available in extra-picking output. i have checked my picking out put for smart form in systems-service-output control if i execute it show like no data to list. no spool request number has generated there.
so were i have to check picking list preview for smart form . is spool request number is necessary.plz help me to view preview of picking list.or plz say the steps to configure this to preview.
thanks,
agilarasan

Hi,
Go to Nace .The application for Goods Issues is
ME - Inventory Management -> select and click on output types ->select wa03 output type and click on processing routines here you can find the form name and the driver program name.So while printing select wa03 as the output type.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Regards,
Harini.S
Edited by: Alvaro Tejada Galindo on Dec 23, 2008 3:46 PM

How to print the form output in news paper format

Hi All,
How we will print the data in the output in newspaper format in SAP script?
Can any body give some idea on this.
Thanks&Regards
Mahesh

If what I understand is correct..!!!!!!!!!
design the windows in required format. and make the window belongs to all required pages and just type the matter there itself. then run the form from ABAP editor.
Cheers.

Run or display the output in Oracle developer form runtime web

Hi guys,
I have installed oracle forms10g in windows 7. im using firefox v.2. when i run the form, the Oracle developer form runtime web is not opening. the output is display in the mozilla firefox itself.
but how to run or display the output in Oracle developer form runtime web?
Thanks in advance

What's the problem? What do you mean with the form, the Oracle developer form runtime web is not opening and the output is display in the mozilla firefox itself?
Is the Form open or not? If you see you form, where ever, then the "runtime" is running!
Is it displays within the browser window? But you expected it in an own window?
If that's the case you have to set separateFrame = TRUE in fomsweb.cfg.

What is the form name (SAP script name ) for KO02 output .

Hai ,
what is the form name (SAP script name ) for KO02 output . and also pl guide how to customize that.
thank u in advance

spro---->controlling ->internal Order->Order Master Data----> Prepare Output and see the documentation of this.
Regards
Peram

Output of the form in various languages

Questions on the forms output
1) What is best way of achieving the output of a form in various languages? Both for SAPSCRIPTS and SMARTFORMS?
2) If I develop a form(SAPSCRIPTS or SMARTFORMS) in English, what kind of efforts are required to get the output in German or Swedish?

Hi Sapna,
While creating a new form u must hv seen an input box of language below the form name input.
Just select ur relevant language type by using F4. For eg: Swedish:SV & German:DE.
Get ur relevant text for the corresponding language & create the form as normal.
Regards,
Himayan

To view the concurrent request output in a custom form

Hi,
I have a requirement to view the concurrent request output from a custom form.
I can use the function "fnd_webfile.get_url " in a PL/SQL procedure and get the value for URL for the request output.
I am not sure how I can call this function from the form directly , ie not sure which library needs to be attached.
and also how to display the URL which has been obtained.
regards

Hi,
I used the below code in my form
l_url := fnd_webfile.get_url
file_type =>'request_xml_output' , --fnd_webfile.request_out,
id => req_id,
gwyuid => l_gwyuid,
two_task => l_two_task,
expire_time => 10 -- minutes, security!.
when I used fnd_webfile.request_out the form was not compiling and hence I passed the value 'request_xml_output'
Now no compilation error exists however how do I display the concurrent request in the screen.
I am not clear here, is there any function I need to use. I checked the FNDRSRUN form and there they have used
editor_pkg.report(req_id, 'Y');, I tried using it but no use.
regards
Maya

Proble with the form output

Hi
Im using oracle forms.when i run a basic form which contains a button im getting the form output but with the menu bar just above the output window with the menu items like Action,Edit,Query,block,record etc....But i dont want it to be displayed in the output. Is it possible to do like that.
Thanks in advance.

Thanks its working........
and i ve another doubt regarding this...
i can see some error messages at the bottom of the window like frm :1020
its something like status bar of the form..
i don't want it to be displayed...
i want a clear out put of a form just like a web page..that's it..
thanks in advance

To Output PO in the form of EDI

Similar Messages

Maybe you are looking for