To post items in EBS

Hi All,
There was a new external transaction sent by bank (020) which had not been configured in the system. We have an external transaction ZZZ which will be taken by the system if it is not able to recognise any external transaction. ZZZ is assigned to posting rule 1111 which is only defined for posting area 1. So, the document is not posted in area 2 & system shows as do not post.
Now we have maintained the external transaction (020) but how do we rectify this? We want to post the document but system gives message "A sub-ledger posting is not necessary for posting rule 1111."
How can we change this? Please

Similar Messages

Total weight of a post item in purchase order message

Hello !
I want to write in the sapscript form used to edit the purchase order the total weight of a post item.
I found in the table EKPO the net weight, but iti is the weight of one article and not of the whole post item.
Does someone know how I can get this information (in which table or structure that is filled the MAIN element of the form) ?
I could multiply this weight by the ordered quantity but it seems not to be possible directly in the form and I want to use the standard program for my sapscript.
I precise that my form is an copy of the standard form MEDRUCK.
I thank you a lot for your help.
Regards,
Céline J.

Any idea ?

Public Sector Records Management Incoming Post Items

My task is to create Incoming Post Items from SAP-Office Emails and automatically assign them to records.
Now I'm at the point to automatically assign the Incoming Post Items to records. I need access to the content of the Post Items for automatic assignment. Properties are accessed by using function module. But how can I get the content of the Incoming Post Items?

Hi virgilo,
Thanks for your reply,
i have check for the transaction, it took me to my inbox, but i can send mail only to internal or external user or some business object etc... but
Actually my doubt is i have a mail in my inbox, but the mail should come to my Electronic desk(SCASE -PS) as an incoming post item under the workbasket.
How can i achieve this. can you please explain me the steps involved in creating(customizing) the incmoing post items.
Also please tell me where is the 4 level process route useful.
Thanks in advance,
Kavitha

Post-Install checks - EBS R12 - Ubuntu 804 amd64

Post-Install checks - EBS R12 - Ubuntu 804 amd64
Need help N°2, please.
The window "Post-Install Checks" shows: -----
Validate System Configuration
1 [red X] HTTP
checking URL = http://ubu.mshome.net:8000
RW-50015: Error: HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2 [red X] Virtual Directory
RW-50015: Error: HTTP Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3 [red X] Login Page
RW-50015: Error: Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
4 [red X] Help Page
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5 [red X] JSP
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
[Retry]
[< Back] [Next >]

hi
I am getting error with opmnctl the log file contents are
you are running bash version 120.7.12010000.2
bash: too few arguments specified.
*bash start*
You are running bash version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
bash: exiting with status 2
bash: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adapcctl.txt for more information ...
You are running bash version 120.15
The logfile for this session is located at /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adstrtal.log
Executing service control script:
*/media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/admin/scripts/adopmnctl.sh start*
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adopmnctl.txt for more information ...
*.end std out.*
*.end err out.*

Activate WF for incoming post item Records Management

Hi.
Could anyone tell me the steps to activate Workflow for incoming post item (Records Managemet).
I'm traying with this Standard Task
TS78800015
TS78800013
Regards

hi Virgilo,
WF activation has two main steps for initial setup:
go to swu3 & use the automatic workflow generation to do the initial setup of workflow in system
u will need to ensure that the mail traffic to & fro works from the system. This is also one of the setting in SWU3.
Once this is done, u shud be able to see the mails arriving in r/3 inbox, in scaseps inbox plugin.
Further customizing like automatic workflow for processors etc can be found in RMPS_CUSTOMIZING.
thanks & regards,
Pragya

Records Management - Incoming Post Item

Hai,
How can we capture the mail to workbasket in PSRM as incoming post item.
Regards,
Keerthika

I don't know any WF to atach mail into record, however you can use BAPI
First with FM capture documents and then use BAPI_RECORD_ADDELEMENT.
Regards.

How do you do post item validations or calculations?

In Oracle Forms, you can use Post Item triggers or When Validate Item triggers to validate data or do calculations as you move out of a form field. How can I do the same in Apex?

In Forms you can run PL/SQL code on both the client and the server, and the client trigger code can seamlessly access server PL/SQL program units and the state of the database session through its dedicated, always-on connection. With APEX things are different. The client (browser) only runs JavaScript and the server only runs PL/SQL; their session states are entirely separate; and they can only communicate through transient, stateless HTTP requests.
In this case, your dynamic action code has executed, but as it's PL/SQL it executes on the server and only affects server session state. (You can check this by reviewing session state—if the session state reflects no change, ensure the Page Items to Submit dynamic action setting includes <tt>P36_AMTRQ</tt>.)
If you require the action to execute in the browser then it needs to execute JavaScript code:
var amt = parseFloat($v("P36_AMTRQ")) * .0025;
$s("P36_FFEDU", amt);
$s("P36_CFEDU", amt);Page events, JavaScript and server PL/SQL programming can be combined using AJAX techniques to run code in the database and return the results to the page without page submission and rendering. htmldb_Get() Documentation vs Real Life.

Values for the automatic posting items are invalid

Hi,
I'm doing two kinds of consolidations, both using its own Special Versions. IFRS and Local Accounting system (Portugal)
In IFRS the system it is working fine.
Although when I try to consolidate in Local Accounting, I have errors.
The customizing of the two special versions only differ in the consolidation of investments. In Local Accounting I have a different account in Net Income Prior to First Consolidation(Appropriation of retained earnings) and in Net Income Item of Statistical Net Income (Selected Items).
After doing this customizing, I tried the Consolidation of investments, and after executing the measure I have the following error "Values for the automatic posting items are invalid".
I can see the document that system is trying to post and everything seems fine. I only noticed that the statistical items are apeearing, which is not normal.
Do you what I'm missing or doing wrong?
I'm new to BCS.
Thanks in advance.
João Arvanas

The message is most likely regarding the posting to the Retained Earnings item defined in Selected Items. I've seen this before and do not recall the specific solution but it entailed using a different item for this.
It may be that the COI setting for displaying the statistical items in the log is version-dependent. If so it may be turned off. I think this is in location of values.

Problem posting items to lifeblog - N95

I have been able to post items with lifeblog to my (typepad) account for about 3 weeks. Then, from one moment on another, I am unable to post items. I didn't change any webblog properties (double checked it hundred times).
Any ideas?
Kind regards
Rob Zoeteweij

thats unusual, if something like that is happening then you could assume two scenarios:
1) the blog service has fallen over in some way, so the phone is waiting for a response from the site but isnt getting any so it sits there forever...
or
2) the application on the phone has broken in some way, the only way to see if that is the issue is to either reinstall the app if it is third party, or reset the phone if it is built in.
mind and take a backup of everything if you want to try restting the phone.
At least you know its not a connection issue, would be good if you could try updating your blog from another device to see if it is the site itself causing the issue.

Problem posting items to webblog

I have been able to post items with lifeblog to my (typepad) account for about 3 weeks. Then, from one moment on another, I am unable to post items. I didn't change any webblog properties (double checked it hundred times).
Any ideas?
Kind regards
Rob Zoeteweij

thats unusual, if something like that is happening then you could assume two scenarios:
1) the blog service has fallen over in some way, so the phone is waiting for a response from the site but isnt getting any so it sits there forever...
or
2) the application on the phone has broken in some way, the only way to see if that is the issue is to either reinstall the app if it is third party, or reset the phone if it is built in.
mind and take a backup of everything if you want to try restting the phone.
At least you know its not a connection issue, would be good if you could try updating your blog from another device to see if it is the site itself causing the issue.

Err msg Goodwill global: All posting items must be specified after upgrade

Hi ,
After we upgarde our SEM-BCS from 3.2 to 6.0 , we got error message "Goodwill global: All posting items must be specified" when click the Check Setting in COI. The Goodwill global setting is not in 3.2. What should we do to solve this issue? And, do we need to adjust our ODS to the new structure according to Note 1080686 - Upgrade to SEM-BCS 6.0 - infrastructure enhancements?
Thank you,
Jeff

Jeff Huang wrote:Hi Jeff,
Is your implementation just technical upgrade from 3.2 to 6.0?
BCS has evolved a lot from 3.2 to 6.0. There are many process enhancements. There are also additional screens. The internal infrastructure has changed.The FINBASIS has also upgraded from 200 to 600 (BCS 6.0) or 700 (BCS 6.0 EHP 2.0). Apart from the note 1080686 mentioned by you, please have a look at the following note: 1095298.
>
>What should we do to solve this issue? And, do we need to adjust our ODS to the new structure according to Note 1080686 - Upgrade to SEM-BCS 6.0 - infrastructure enhancements?
Approaches differ from consultant to consultant. If I were you, I would have chosen to re-configure the whole BCS itself, under another new consolidation area using same data basis and master data, with all new features included in order to take the benefits of enhanced features of BCS 6.0.

Posting items without times

Can I not see the times when the calender is printed? I want to view posted items in a set order. The only way I seem to be able to do this is by posting them with an artificial time. I could make them all-day events but I don't seem to be able to arrange these in my order. Any help would be appreciated.

There's no way to set the order of all day events, but they do sort alphabetically so you could use an A. B. C. or 1. 2. 3. prefix in the event title.

Clearing customer special G/L debit item in EBS

Dear Experts,
In the customer account there is a debit item with Special G/L Indicator. Can this be cleared in the EBS Posting(FF.5) if the reference no. matches in the Bank statement. What parameters are required in the Posting Rule.
Regards,
Vikram K

Hi VIKRAM KATTA
Yes, you can post clearing documents for SP GL items as well. Please follow the below posting rule.
Posting rule : XXXX
Posting area: 1
Posting Key: 40
Debit Account symbol : BANK
Credit posting key : 50
Credit Acc symbol : Bank interim account.
Posting type : 1
Doc type : SA.
Posting rule : YYYY
Posting area: 2
Posting Key: 40
Debit Account symbol : BANK interim account
Credit posting key : 50
SP GL indicator : A (specify your customer SP Gl indicator here)
Credit Acc symbol : (keep it blank)
Posting type : 8
Doc type : DZ
Once the two documents are posted then you can clear the interim accounts through F.13.

Clearing VAT GL open items with EBS

In some countries like France and Mexico. VAT taxes are not recognized when an invoice is issued, but when a payment is made.
I want to clear VAT GL Open items using Bank reconciliation EBS. Instead of clearing using Deferred process program RFUMSV50
I would appreciate if anyone of you that has been dealing with clearing VAT taxes using EBS kindly make some comments or share some experience.
Thanks in advance for your information.

when you clear the open item, the system will pick up the exchange rate mentioned in the tables (Tcode OB08) and the difference in the exchange rate entered in the invoice and the exchange from the tables at the time of payment will be proposed.
If you enter the payment document with the same exchange rate you had given at the time of invoicing, there will not be any difference.
Check you settings in OB08.
Regards

Wrongly post item type in the Purchase request, Purchase Order and GRN

i have this scenario that user have wrongly created the PR,PO and GRN suppose with one line item is service item price RM1000 and another is inventory item Price RM100 but user had lump the inventory item into service item and had post the PR,,PO and GRN in the system. How resolve this scenario?
Can we reverse the PR,PO and GRN?

Dear,
U can reverse only that particular line item in GRN, PO & PR. Try & get feedback.
Regards,
Suresh.P

To post items in EBS

Similar Messages

Maybe you are looking for