To print page tll data is avilable not whole page

Hello sir,
I am using VB6+CrystalReport.
i a showing data dynamically
Report distributed in 3 parts.
header,Data and Footer
header having 8 lines and footer having 4 lines
and data part is dynamic it may be one line, may be 5 and may be 20
I have to print where Data is avilable not whole page
please help me

CR doesn't have an option to print just one part of the page. Your only option is to hide all parts you don't want to print first.
Also, you should post your question to the Legacy Developer forum. I'll move it there for you.

Similar Messages

I get a weekly email with a PDF attachment and when I open it it's to large to print. To date I'm not able to find a way to shrink or adjust the size. The doc was created on M/S Office-excell

I get a weekly email with a PDF attachment and when I open it it's to large to print and I know of no way to shrink or resize the doc. It's created in M/S excel. Can anymore assist....TX

From: Test Screen Name [email protected]
Sent: Sunday, August 04, 2013 11:32 AM
To: gunner0490
Subject: I'm not able to open PDF files in Adobe Reader XI.
Re: I'm not able to open PDF files in Adobe Reader XI.
created by Test Screen Name <http://forums.adobe.com/people/TestScreenName> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

When printing page data in Schwab, the font is so tiny it's almost invisible - this does not happen in Windows Exploror.

On 2/20/2013 all printing was normal. On 2/21/2013 not only did the printing not work, but PDF files did not show up properly. Is this a new version of Firefox? I got the PDF reset so that works now, but not the printing. In Comcast email, the date field shifts way to the right and forces the font smaller. When I uncheck "shrink to fit" it does not wrap the text but rather chops it off when I increase the font size.
Today I tried printing pages from Schwab using their "Print Page" button which always worked in the past but today it was unreadable.
Can I go back to the previous version of Firefox?

https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox

Ps CS5 "Print Page Setup" dialog will not open

Hello: I was printing via my Photoshop CS5.
I accidentally created a paper size of 0cm x 0cm and attempted to print (up to this point Photoshop and Print worked).
I now (permanently) get an error message: "There was an error opening your printer. . . "
Photoshop >File >Print. . . will not open the Print Page Setup.
Photoshop >File >Print one copy (works, but still tries to print 0cm x 0cm, the printer spits out a blank page).
Using the (Mac/Apple) app 'Preview' I deleted the paper size preset '0cm x 0cm'.
apps; Preview, Text Edit, Mail, Word, . . . all print properly (they can open the 'Print Page Setup' dialog).
I set up two other printers (now three in total) and they work with all applications (except Photoshop).
I uninstalled and re-installed Photoshop and my printers, including all their preference files.
Also, I again deleted Photoshop preference files by opening Photoshop while pressing 'Shft-Opt-Cmd'.
In 'System Preferences' >Print & Fax >Printers; I reset my computer's "Printing System".
I repaired 'Disk Permissions', Safe Boot and have also done multiple restarts.
Since only Photoshop has a problem, I believe Photoshop has (somewhere) set a preference thinking it's default paper size is 0cm x 0cm which is throwing an error and preventing the 'Print Page Setup' from opening.
I updated Photoshop Adobe Air, Printers, . . . after re-installing.
I ran an app that clears my computer's caches.
I reinstalled (and updated) my computer's operating system (OS only, not my account and data).
I would appreciate your help. Thank-you, M_L_R
Mac OS: 10.6.8, Apple/MacPro 2009, 2 x 2.93GHx 8-Core processors, 16GB of Ram (DDR3 1066 MHz)

Hello: I repaired my (Print: Page Setup. . . dialog panel will not open) problem.
The fix was one of the many suggestions I researched in the 'Adobe Help'.
    Unfortunately I dismissed this solution (until now).
    reference: http://helpx.adobe.com/photoshop/kb/error-install-printer-photoshop-cs4.html
        see >Solution 7: Create a different user account and run Photoshop as that user.
Some of the (following) procedures may not be necessary, but the core solution is in there. . .
    Mac OS X v10.5 or later >System Preferences >Accounts >Guest Account (sharing only) >Allow guests to log in to this computer >Automatic Login (for Administrator, still active - optional) >then log out of the (main/administrator) account >then Log in to the guest account >go to the applications folder (in the guest account) >open Photoshop >create a new simple document (example: create one text letter) >Print. . . (in this situation Print: Page Setup. . . the dialog panel opens [remember: this is the error problem in the main account]) >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >Log out (of the Guest account) >Log in to your regular (main/administrator) account >the Guest account can now be deactivated (optional) >open Photoshop (in your main account) >test print a simple document >the (Print: Page Setup. . .) dialog panel now opens >(do what you normally do) select your printer >set up a page size and printer options >print. Save that Photoshop project >delete that Photoshop project >the (Print: Page Setup. . . dialog panel will not open) problem is repaired. Bye for now, M_L_R

Print the form data instead of whole page

Hello All,
I am having a problem in my ADF/JSF page. I just want to print the form data of my form instead of the whole page.using javascript:print() method prints the whole page.so can you help me in solving this issue. I have JDev 10.1.3 and do not want to upgrade to JDev 11g!
Is there some java code to do so?
Thanks,

Hi,
you can apply CSS to the page and use the media selector to deermine which components should appear in the print and which should not.
Downlad the word document in http://thepeninsulasedge.com/frank_nimphius/wp-content/uploads/2008/05/OldAndLostBlogBusterTips.zip
and have a look at page 287
Frank

Data Modeler 4 Can't see printing page grid (page borders) in model diagram

Hello,
I've read that Data Modeler 4 now shows page borders for a diagram, so it would be much easier to prepare the diagram for printing on pages. I can't see these page grid border lines on my diagrams.
Can you please help me with configuring this?
I go to my "Relational Models", I see the diagram, I right-click on the diagram, select "Show" and I see "Grid", "Labels", "Legend", then I select "Grid" and I see dots on my diagram but no page border lines.
I have version 4.0.0.825 installed.
Thank you,
Milan

Thank you Philip.
I guess I was so happy about this new printing feature that I didn't read that last paragraph. You can guess that my next question is "do you know when is next release coming?".
I've been wondering for quite some time now, how is it possible that Oracle allows that printing diagrams in Data Modeler is so complicated. I know that product is free, but still, we are talking about Oracle standards here. They should just task a couple of managers involved in data modeler development to print a 50-table diagram on letter size pages (many people don't have access to a plotter), and they will quickly realize how complicated and time-wasting it is.
At the end, and if I'm not mistaken, blagodaram / благодарим
Милан

Smart forms- when i print a report it print main window data on same page

hi,
when i print a report it print main window data on same page .
i.e. if data is more then one page then it shows data page wise on computer screen but when i print it print all data on same only one page by over wrriting .
pl. help why it is happening
i create page in page i set next page and in second page give first page.
mukesh

mukesh,
what happened to this: smart form
close that please.
by the way,did you tried with what i suggested?
lets say mainwindow in 1st page.
copy the first page to second page.
now.
for 1st page: next page is : page2
for page2: next page is also : page2

Officejet pro 8100 does not print pages in "back to front" sequence

officejet pro 8100: I cant make it print pages in the sequence last page to first page even tho I have set the default printer preferences to "print back to front" AND I have specified "back to front" for the particular print job.
I am using this 8100 as a WIRELESS printer.
Yesterday it worked OK.:
I did NOT turn the printer off over night.
Today it will only print in first-to-last-page sequence.
I have tried the following:
turned printer off; and then on.
rebooted windows 8.1.
rebooted the router.
confirmed that it WILL print in first-to-last-page sequence for each test.
My test document has 4 pages.

Hi John , I hope you had a good weekend!
I just want to verify:
When you print an 8 page document FRONT TO BACK page 1 comes out on top.
When you print an 8 page document BACK TO FRONT page 8 comes out on top.
Is that correct?
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Is there any way to print the data inside the Notes field of MIR6 Report

Hello Gurús.
We need to include the data inside the Notes field in the report MIR6 - INVOICE OVERVIEW - report.
Is there any way to print the data inside (comments) the Notes field as well in the Report ?
We found that the only way is to open the Notes and print it, but it takes time, any idea ?
Rgds.
MCM.

There's nothing built-in that does that. If you only have text fields and they don't have any formatting or other property that would prevent it (e.g., Date, character limit), you can run a simple script to populate each field with the field name, and then print. A more complicated approach would be a script that adds text annotations near/over each field that shows the field name. This would just be for documentation purposes, but it's possible. Post again if you'd like help with the first. You'll probably have to pay someone for the second approach if you don't want to do it yourself.

Unable to print, pages not selected.

I have reader XI and I get an error message saying unable to print pages not selected. the only things on the forum have been they same error with reader 9. I have tried all of those fixes with no luck. I have to open Acrobat with the Internet to print with is frustrating as I work with a proprietary software program that most of my reports come up in acrobat.
Please help.

Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

Acrobat 9 bug? - Print Pages function does not print all bookmarked pages

We use the Bookmark Print Pages function to allow for easy printing of sections of large PDFs. All of the pages that should be printed are bookmarked. The bookmarked pages print correctly in Adobe 8, but not in Adobe 9.
I have put together a javascript workaround, but would prefer a solution that does not require distributing a file to all users.
I would appreciate any suggestions on other possible workarounds.
Here is the bug report I submitted to Adobe:
Concise problem statement: The "Print Pages" function for bookmarks does not print all bookmarked pages in Adobe Reader 9.0 and 9.1. The same bookmarks print properly in Adobe Reader, Standard, and Pro 8.
Steps to reproduce bug:
1. Open the Adobe Acrobat SDK JavaScript for Acrobat API Reference PDF (Version 8.1, April 2007) in Adobe Reader 9.0 or 9.1.
2. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
3. Open the same PDF in Adobe Reader, Standard, or Pro 8. (I used Adobe Professional 8.1.3.)
4. View the bookmarks. Right-click on New Features and Changes and choose "Print Pages."
Results and Expected results: Printing from v8 results in 12 pages. Printing from v9 results in 9 pages. Pages 741, 754, and 769 did not print from v9.

I'm having the same issues. Using the latest version 9.3.3. Is this a bug? I tired calling adobe but their CR sounds like 3rd country only. Anyone can shed a light on this issue?

Saving as a PDF in print page order [not actual page order]?!?!

Hiya,
I've got a 20 page newsletter, each page A4, all created in InDesign CS3 [nice and simple]. I want to print the document in print page order [as appose to actual page order] on our printer here at work, because it's clever and can fold and staple to create a book/newsletter etc! In InDesign, I can obviously use the 'print booklet' option to do just this, and it works great; all my pages are printed in the correct order, I can also choose to print 2-sided, all lovely. But I was wondering if there is an option somewhere to be able to save my InDesign doc as a PDF in print page order [front with back, page 2 with 19 etc] - as printing a PDF of my artwork seems to solve a problem i was having in the thread I posted up yesterday.
Cheers guys

This is called "imposition". Does your OS and InDesign version come with the "Print as Booklet" option?
If not, you can enter this range into the page number "Range" box on exporting:
20,1,2,19,18,3,4,17,16,5,6,15,14,7,8,13,12,9-11
(Typed from memory; -- please check)
If I then print this PDF to my HP with the options "double sided" and "2 pages per sheet", it comes out exactly the way it should.
(Waiting for the printer ... hold on.)
Well whaddoyouknow -- I got the numbering right first time. Perfect!

Margin settings not holding on printed page and are jagged

A few days ago, on occasion only, printer began issuing paper jam message when printed page was all but a probably 1/8" already out. Just touching paper really brought the page out the rest of the way.
I did pull out the two-sided paper accessory to look for any paper, but there is no paper jam that I can see.
Also, in the midst of printing sometimes it made a loud grinding (I guess) sound, but kept on printing and sent the page out completely.
Then I began to notice the left margin might slope inward as I look down the page or it may be different from one Word page to another and a little blurring occurs in a word here and there.
Finally, upon printing Excel pages I see a different left margin about what I consider to be every 2 lines. This, of course, affects the right margin in the same manor, and the vertical cell lines also vary according to the variance of the left margin.
The HP software tells me there are no updates for me to download. However, I don't know that it has ever mentioned any. I haven't seen this precise issue listed.
This question was solved.
View Solution.

Yay! Smooth margins! At first I mistakenly thought (without looking) the cord would not reach an outlet; so I downloaded the HP Scan and Print Doctor. It told me there was a newer driver. I admit I eventually found myself at a point where it wanted me to "install" as if the printer was being newly associated with my computer. I paused and thought because I hadn't expected a new driver to want me to do a complete re-install. I decided I should just try printing again, and magically it gave me perfect alignment. So I stopped right there. I had used the recommended assisted download. Perhaps I should have switched to the plain download. While I'm not sure exactly what happened, it appears to be nicely fixed.
I thank you very much! I'd not have figured that out on my own.

Printed page could not be ended

Hi all
A client just had this issue
She just created a AR invoice and it gave me a message u2026u2026. Printed page could not be ended.
She went back to see if it was added and now there are 2 invoice nou2019s are 502780 and 502781?
and its exactly the same..the customer, items, total,s etc.
It seems very strange.
I didn't see anything on the forums thats exactly like that
Any help will be appreciated.
Thanks
Jerusha

Hi guys,
I am helping Jerusha at this client, maybe I can give some extra info which may help.
The add-on in question does not affect the sales invoice in any way, so I doubt it is that.
It is set to automatic printing for A/R Invoices in the Print Preferences, could it be something to do with that?
Thanks
Best Regards

The printed page could not be ended

One of our customers are running 8.8 PL06. When a user try to print multiple checks at once, they get The printed page could not be ended. If they print one at a time it works fine. I looked into forum and help but no luck. Is it a bug on this patch? If so, i can advise customer to upgrade to 8.81. Please advise.

How,
It could be due to bug. However, first make sure the page setting is correct.
Thanks,
Gordon

To print page tll data is avilable not whole page

Similar Messages

Maybe you are looking for