To print text in sapscrpit.

I want to print text maintained in standard tcode QM03 in sapscript .
I have a y-report as driver program and want to print the text maintained for a notification number in the script. I have used "read_text". But i get only partial text.
In the debugger all the text comes in the variable but only prt of it gets printed in the actual script . Please help

Hi
Check the Window size where you are printing the Text from the Variable
from the read text you will get into the internal table lines
so format those internal table line field as per the space available for that field and do
Regards
ANji

Similar Messages

How to print text vertically in smart forms

hi,
Can any one tell how to print text vertically in smartforms
ADVANCE THANKS
GUHAPRIYAN

HI,
Chk out this thread.Maybe it proves helpful.
Re: vertical writing in smartforms
Regards,
Gayathri

Print Text File in NW 3.12?

I have to admit some ignorance regarding NetWare printing, so my
apologies in advance...
I work for a document management company, and am trying to find a
solution for a customer running a fairly archaic, DOS 6.22-based
application that utilizes a NetWare 3.12 server for file and print
services. My need is to retrieve print output from their application,
in the form of a text file, and then reprocess it for automated faxing
through a fax server device.
My problem is this: their application seems to print directly to a
printer by defining what it calls a "network port" (which seems to map
to a spooler, 0 through 5) or LPT1, and by referencing a printer
definition. As far as I can tell, the files that are deposited in the
print queue are byte streams, i.e., they're not human-readable (they
have extra characters that I'm assuming are control characters). They
therefore aren't usable by my print distribution software.
I've tried using CAPTURE to send to a text file, but the application
seems to conflict with the command. If I set CAPTURE, then start the
application and send a job to LPT1, the application returns an error
that the printer is unavailable. Upon exiting the application the port
is no longer being captured (although I've tried all of the options I
can think of to keep it so). Oddly enough, the application does
successfully print a text file to LPT2 (for a barcode printer), which
is CAPTUREd via a command in the system autoexec.bat. This is done a
different part of the application.
If anyone can help me figure out a way to generate a text file in this
environment, or to work with the print file that's currently being sent
to the queue (e.g, can it be translated somehow to a simple text file?),
that would be much, much appreciated. This customer is in a tight spot,
with an unsupported application that they can't presently afford to
upgrade. My solution would save them enough money over time to replace
the system.
Again, thanks in advance for any help!
wynand32

If the Dos app has no print drivers included, then indeed it is relying
on NW and PRINTDEF/PRINTCON to do the formatting stuff. That must have
already been set up for it to be successfully printing now, it's just a
matter of adding a definition that doesn't do anything to the print text.
>In fact, given my ignorance of the NetWare environment, I'm not sure
how the term "driver" even applies, unless it would refer to the
printer definition.
I was referring to a driver within the Dos app, nothing to do with
NetWare. For instance Word Perfect for Dos came with Dos drivers for all
sorts of printers, one of which was a generic text driver.
>I wonder: is there a setting in PRINTDEF that could be changed for one
of the printer configs that would influence the output? Or, would
PRINTCON apply in this environment?
Not supplied, AFAICS, but either one of the simpler print drivers
supplied such as Diablo will do, or you'd need to set one up. Hopefully
http://www.novell.com/documentation/...a/fm19724.html
will help you enough as it's been too long since I did it to remember
the details.
Andrew C Taubman
Novell Support Forums Volunteer SysOp
http://support.novell.com/forums
(Sorry, support is not provided via e-mail)
Opinions expressed above are not
necessarily those of Novell Inc.

How to print text/data in flex 3 using printer???Plz help...

   Hi,
          plz tell me the way to print text/data using printer in flex. I tried the FlexPrintJob class. but it takes object of a container to be printed & prints the visible content of that container(along with scrollbars), bt i want to print all contents of the container(including invisible).
      I have tried to print bitmap image through FlexPrintJob but it takes lot of time for spooling... So plz help me out in printing(fast with all content) in flash
I am using flex 3 (flex Builder 3 IDE).
Thanks in advance!!!

Hi Sagar,
Don't worry You can use the below work around to print all the contents of the Container including the invisible contents under scrolll with out scroll bar..
So what the idea here is we are seeting the container height to full size with out scrolls before sending the container object to printer and as soon as you print the object you are restoring it to the original height with scrolls...so that you can print the full contents without scrolls...
You may have doubt that by chnaging and restoring the size the user may see momentary resize of the container but it is not so as it is a fraction of a second and user cannot notice this change... Give it a try ..I had already run into this problem recently and I have found a work around for this which is as below:
// Here mainContainer is the container or box id the contents of which you want to print
   private function doPrintContainer():void
    var printJob:FlexPrintJob = new FlexPrintJob();
    if(printJob.start() != true) return;
    try
     var mainContainerHeight:int = mainContainer.height;
     //Increasing the height of the desired component to be printed.
     mainContainer.height = mainContainer.measuredMinHeight;
     mainContainer.verticalScrollPolicy = "off";
     //Adding the resized Component to our FlexPrintjob and then sending the print request
     printJob.addObject(this,FlexPrintJobScaleType.MATCH_WIDTH);
     printJob.send();
     //Resizing the component back to normal size
     mainContainer.height = mainContainerHeight;
     mainContainer.verticalScrollPolicy = "auto";
    catch(error:Error)
                 trace("Error : " + error.message);
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari

How can i print text messages from my htc amaze to my deskjet 3050A

how can i print text messages from my htc amaze to my hp deskjet 3050A

Hi,
I believe the phone uses Android OS, v2.3.4 (Gingerbread) therefore you can use one of these applications:
http://www.printeron.com/apps/androidprinting.html
https://market.android.com/details?id=com.pauloslf.cloudprint&hl=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

How to print text on container using oop on alv list

Hello Guru's,
         pl guide me how to print text on container using alv list-display which have interactive events using     oop classes/methods ...
                I want to print hard coded text on coantainer , on double clicking it will call another screen.
Pl Help..
Message was edited by:
        paresh sonavane

Hi Paresh,
       1.      Go to the Layout and Create One custom container box and give name it.
        2. Custom Container is the one type of tool and its used for Displaying the Reports
            with the use of ABAP Objects.
        3. Go to se38 and Write The Following Code.
tables ZTEAM_GD.
DATA : OBJ TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       OBJ1 TYPE REF TO CL_GUI_ALV_GRID.
DATA IT_TEAM LIKE TABLE OF ZPLAYER_BAT_DET       .
SELECT * FROM ZPLAYER_BAT_DET INTO TABLE IT_TEAM.
CREATE OBJECT OBJ
EXPORTING
    CONTAINER_NAME              = 'ALV'.          -
> Give ur Container Name
CREATE OBJECT OBJ1
EXPORTING
    I_PARENT          = OBJ.
CALL METHOD OBJ1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
    I_STRUCTURE_NAME              = 'ZPLAYER_BAT_DET'
CHANGING
    IT_OUTTAB                     = IT_TEAM.
*CALL METHOD OBJ1->SET_DROP_DOWN_TABLE
EXPORTING
   I_STRUCTURE_NAME = 'ZTEAM_GD'
CHANGING
   IT_OUTTAB        = IT_TEAM.
CALL SCREEN 9000.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE SY-UCOMM.
WHEN 'EXT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPU
Thanks.
Reward If Helpful.

Print text file with labview 2011 and windows 7

I am having some strange problem, hope someone out there knows the solution.
We have a labview program running under windows xp, the program runs some test and print label from a local label printer. Last week, I have to upgrade the computer to windows 7 and all the sudden the printer will not print any more.
The print vi is very simple. I am using the report function and I am attaching the diagram of that vi below.
If I use windows notepad to open that small text file, I can print fine. This means the printer driver itself is OK. However, if I print the same text file through Labview printing vi, from the printer's task list, I can see it does not recognize the char. From the attached png file, the top one is the task from notepad, it shows 2 pages and the bottom one is from the labview, it becomes 33 pages.
For the printer part, I use Generic / Text Only printer driver which comes from windows itself. And I am aslo attaching a sample of the text file, there are quite a lot of special char, it is for print bar code. When I tried to use labview print text vi to print general text from my computer to a regular printer, the vi works. So it seems Labview print can not handle the special char? Although it worked many years under windows XP in the past.
Welcome to any suggestions!
Thanks
Attachments:
print vi.gif ‏9 KB
labview print bug.png ‏26 KB
SerialLabel.txt ‏1 KB

DGU wrote:
where to check RAW or TEXT? the print report vi only asks for file name and printer name.
When I print from notepad, everything just goes by default. This is a label printer, so I never need to specify printing parameter such as size, orientation, etc in the past
Famous last words go something like this: "...never had to do that before." Maybe you have to do that now. It's worth at least comparing the defaults settings for bothe generic drivers. It could save you a lot of headache if you notice something different.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

Can't print text documents

For a little over a week I have been unable to print text documents from either of my printers (Lexmark Z-23 and HP PSC 1410). I had noticed that the sharpness of text had been declining-but I was in denial, sort of. Now, when printing text documents from the computer, the printout is garbled, streaked, and unreadable. Sometimes the first half of printed document will be okay but the second half will be all garbled and streaked.
I have tried to print from Pages, Appleworks, and TextEdit. No success in any of them. I have converted a page of my word processing document to pdf format, but it does not print out properly in pdf, either.
Here's the weird part: the HP will produce good copies (copy function) I am able to print out beautiful iCal (calendar) pages; some web-based information (like maps with directions) comes out great; and even "screen-shots" (or pictures) of text documents are fine; I just can't print text-based documents.
So far, I have cleaned and calibrated the printers; they have enough ink. I have uninstalled then reinstalled the software and drivers.
Help?
~~PM
iMac G5 2GHz PPC Mac OS X (10.4.8) still miss my Indigo G3

my guess is, it's not your printers that are the
problem but maybe a font problem.
Have you done anything with fonts lately?
Why, yes.
Just today, in FontBook I validated fonts and
resolved duplicates, whatever that means. I also
"turned off" a bunch of fonts that I never use. Then
I restarted, reset PRAM, and repaired permissions in
Disk Utility.
I still have the problem.
What other kinds of things can you do with fonts?
~PM, wife of GM
Glenn-- Here is a great article written by a fellow apple forum frequenter:
http://www.jklstudios.com/misc/osxfonts.html
Maybe you can read it or weed thru it and make sure you haven't turned off any necessary fonts that you don't use but the system finds necessary. Especially "TextEdit" uses I think exclusively system fonts and if you've turned them off... It's just good to know which fonts are for what before you disable certain ones.
I believe fonts can definitely cause these sorts of problems, especially if you've disabled system fonts.

How to print text on back and back of page in smartforms

How to print text on back and back of page in smartforms.

Prince,
in page's output option you can set D for double-sided.
Default: No change of print mode
S     Begin new page in SIMPLEX mode (single-sided)
D     Begin new page in DUPLEX mode (double-sided)
T     Begin new page in TUMBLE DUPLEX mode (double-sided)
Amit.

How to Print Text in WAD 7.0

hi
i have created a web template using WEB APPLICATION DESIGNER
now i have added few custom texts in it like
Report name,Cost centers ,Plant Names
now if i use Export to command to create print , it is not printing this custom texts
it is only printing Query Result.
If i use File -> Print
this print texts but cannot print WHOLE QUERY DATA
it only prints what is visible (e.g. if the report is wide with 20 Columns, it cannot print 20 columns.)
how to resolve this ??

Hi kartikey,
just select a text item and enter the text at the last parameter TEXT_CONTENT, that´s it. You may change the style and so on. It is also possible to bind the data provider and display the query title or other generic text.
Look up the SAP help here:
http://help.sap.com/saphelp_nw70/helpdata/en/8c/d9413a3ace7022e10000000a11402f/frameset.htm
regards
ARNE

How to Print text in two main windows

For printing label have created two main windows on a page. calling function write_form In ABAP Program under do loop for two times.
but program prints only one window. why is it so? how can i print text on two windows.
do 2 times.
COUNT = COUNT + 1.
loop at itab WHERE DEPTT LT 200.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'TEST'
        FUNCTION = 'SET'
        TYPE     = 'BODY'
      WINDOW   = 'MAIN'
      EXCEPTIONS
       ELEMENT   = 1
       FUNCTION = 2
       TYPE      = 3
       UNOPENED = 4
       UNSTARTED = 5
       WINDOW    = 6
       OTHERS    = 7.
endloop.
enddo.
Please guide.

Since the information is variable and coming out of the print program, I can assume you want to print many labels but two to a page. Also, any page numbering, etc will need to be updated. This is easily accomplished with SAPScript but a feature people rarely use I believe. Here are the simple steps:
1) On the Windows Screen: Creat a main window for the size of the label, etc knowing that you will be putting multiple windows on a page. For example, if page size is 8.5 x 11, maybe your window size is 6 X 4 or something similar. You only need one main window defined.
2) Now go to Page Windows Screen. Add a window MAIN and down at the bottom where it says Window Type put in MAIN. Next to this field is a little field about two characters long. In here put in '01'.
3) Now Add another window MAIN and down at the bottom put in '02'.
Hopefully this gives you the idea. I've done this with up to 30 small windows in order to print variable window for labels on label stock such as Avery 8167, etc.
Good Luck!
Tim Stadler
Menasha Corporation

How to Print Text in the PLD when we select Type : Text

Hi All
I designed a PLD for Purchase Order which is working well but
whenever we select type: Text and we enter some text in the row level for each item. when we see the PLD priview
Items are displaying but the text below the items are not displaying
it displays an empty row after each item
How should i print text in the PLD
I required in this following Format
ITEMCODE DESCRIPTION      QTY
001              XYZ                      20
this is capital Good Item
002             PQR                        30
this is Raw Material
In this above format
I didnt get the text below the Items
Can any one suggest the correct answer

Thanks for your reply
I already select the linetext field from table POR10 and kept it in the PLD
but i didnt get my required format
after giving that line text field iam getting
in this way
S.No.        ITEMCODE   DESCRIPTION QTY
   1               001               XYZ                 20
this is Capital Goods
2
this is Capital Goods
the text is repeating twice
I Put the ItemDescription field in POR1 and Line Text Field in POR10 in the same repetitve area

How to print "Text" in JAVA(TM)....

Does anyone know how to print "text" using Java?
- Here's an example output...
NOTE: # == 'empty spaces'
--------------------------- <- Paper
|###################|
|####Welcome#########|
|###################|
|########to##########|
|###########JAVA(TM)##|
|###################|
|#######Programming####|
|###################|
Please post a complete << SAMPLE CODE >> for printing the "text" (Welcome to JAVA(TM) Programming. Including the indentions. So it will not be like this...
-------------------- <- Paper
|Welcome |
|to |
|JAVA(TM) |
|Programming |
| |
| |
| |
| |
Thanks.

Please read How To Ask Questions The Smart Way

How to print text in paper format iin smartforms

Hi all,
I want a question that how to print text in paper format like paper divides into 2 parts and if the firstpart is full of text i.e., it exceeds the first page the text will be displyed in the second part of the first page.
Usefull answers will be awarded.
Thanks all...

Hi,
U create two windows in the page and same as like second page.
but in first page first window select the condition print only on first page.
in second window select conditin print only on second page.
first try without creating a secondpage. if that doesn't workout create secondpage and try.
Assign points if useful.
Regards
(YUGANDHAR.P)

To print text in sapscrpit.

Similar Messages

Maybe you are looking for